Reconstructing shaft orbit using angle measurement to detect bearing faults - Pôle Automatique et Diagnostic Accéder directement au contenu
Article Dans Une Revue Mechanical Systems and Signal Processing Année : 2020

Reconstructing shaft orbit using angle measurement to detect bearing faults

Résumé

The use of Instantaneous Angular Speed (IAS) in condition monitoring of rotating machines is an appealing alternative to traditional approaches such as those based on accelerometers: the direct angular sampling characteristic of IAS measurements has proven to be a favoured framework to study mechanical phenomena involved in rotating machines. Physical models have been established to link the variations of IAS to torque disturbances in case of mechanical fault such as bearing failure. In this paper an original point of view is given on the IAS measurement by linking IAS variations and shaft vibrations. First the orbit of a rotating shaft is studied to show that it contains useful information about the health state of the bearing. Then angle position sensors traditionally used in IAS measurements are combined to reconstruct this orbit. It is shown that IAS measurements are sensitive to the shaft vibrations, which may be used advantageously to enhance the diagnosis possibilities. Finally the links between various defect sizes and the reconstructed orbits are investigated to propose a fault severity indicator.
Fichier principal
Vignette du fichier
MSSP19-806R1_text.pdf (2.11 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02408146 , version 1 (12-12-2019)

Identifiants

Citer

Guillaume Bruand, Florent Chatelain, Pierre Granjon, Nadine Martin, Christophe Duret. Reconstructing shaft orbit using angle measurement to detect bearing faults. Mechanical Systems and Signal Processing, 2020, 139, pp.106561. ⟨10.1016/j.ymssp.2019.106561⟩. ⟨hal-02408146⟩
177 Consultations
204 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More