Towards inkjet printable conducting polymer artificial muscles - LAAS-Micro Nano Bio Technologies Accéder directement au contenu
Article Dans Une Revue Sensors and Actuators B: Chemical Année : 2016

Towards inkjet printable conducting polymer artificial muscles

Résumé

Inkjet printing is a key technology in the field of defined polymer deposition as well as in fabrication of strain sensors. It is also one of the most promising alternatives to prevalent fabrication of conducting polymer actuators. Nevertheless, inkjet printed actuators were not yet realised due to rheological properties of conducting polymer solutions that challenge jetting and the complex solution–membrane interactions, that lead to poor adhesion or uncontrolled infiltration. In order to enable this fabrication method, hybrid hydrophilic-hydrophobic polyvinylidene fluoride (PVDF) ultrafiltration membranes were used. They ensure good adhesion with printed poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) layer. Furthermore, PEDOT:PSS compositions that have liquid properties suitable for printing but do not cause uncontrolled infiltration through the membrane were identified. This allowed the realisation of the first inkjet printed PEDOT:PSS based ionic actuators working in air.
Fichier non déposé

Dates et versions

hal-01764287 , version 1 (11-04-2018)

Identifiants

Citer

Christian Bergaud, Aiva Simaite, Fabien Mesnilgrente, Bertrand Tondu, Philippe Souères. Towards inkjet printable conducting polymer artificial muscles. Sensors and Actuators B: Chemical, 2016, 229, pp.425 - 433. ⟨10.1016/j.snb.2016.01.142⟩. ⟨hal-01764287⟩
55 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More