Organometallic approach for the preparation of metal oxide nanostructured gas sensitive layers (ZnO, SnO2) - LAAS-Micro Nano Bio Technologies Accéder directement au contenu
Communication Dans Un Congrès Année : 2014

Organometallic approach for the preparation of metal oxide nanostructured gas sensitive layers (ZnO, SnO2)

Résumé

Semiconducting metal oxide sensors are one of the most widely used gas sensors. However, the main drawback of this type of devices is their lack of selectivity and sensitivity. Few pathways are usually investigated in order to achieve a better sensor performance, namely: choice of the chemical composition of the sensitive layer [1], careful morphology control of the used structures [2], integration of the catalytic filters [3], and surface modifications with noble metals [4]. In this paper we present a simple, room-temperature organometallic approach for the preparation of metal oxide gas sensitive layers (ZnO, SnO2). Controlled hydrolysis of zinc precursor leads to the formation of crystalline zinc oxide nanostructures [5]. Under different reaction conditions it is possible to master the ZnO particles morphology leading to the formation of either cloudy-like nanoparticles, isotropic nanoparticles (diameter of ca. 5 nm), or nanorods (diameter of ca. 5 nm and length of ca. 20 nm). Similarly, the hydrolysis of tin precursor leads to the formation of pristine nanoparticles made of Sn3O2(OH)2. Upon in situ heating, the layer is transformed into SnO2. All prepared materials are deposited on miniaturized gas sensors substrates [6] by an ink-jet method. The results show that at 500°C all sensor exhibits good response to exposed gases, namely 100 ppm CO, 100 ppm C3H8, 5 ppm NH3. Sensitivity of ZnO nanorods towards C3H8 (70%) is the highest from all tested structures. Also SnO2 sensor gives very good response to this gas (59%). The ZnO cloudy-like sensor gives the weakest response to C3H8 (10%). ZnO nanorods and SnO2 sensor give also high responses in the case of CO detection (63% and 67%, respectively). The CO sensing performance of ZnO isotropic and cloudy-like nanoparticles sensors is quite similar (ca. 40%, 500°C). All ZnO sensors give a quite similar and weak responses to 5 ppm NH3 (ca. 5-7%), whereas the SnO2 sensor is very sensitive to this gas (55%). These results highlight not only the role of the chemical composition of the sensitive layer, but also the influence of nanostructures morphology on gas sensor sensitivity and selectivity.
Fichier principal
Vignette du fichier
Paper Bilbao2014 V4 final.pdf (295.46 Ko) Télécharger le fichier
Abstract-ICMAST2014 (1).pdf (33.79 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02048928 , version 1 (25-02-2019)
hal-02048928 , version 2 (17-06-2019)

Identifiants

  • HAL Id : hal-02048928 , version 2

Citer

Justyna Jońca, Myrtil L. Kahn, Katia Fajerwerg, Bruno Chaudret, Audrey Chapelle, et al.. Organometallic approach for the preparation of metal oxide nanostructured gas sensitive layers (ZnO, SnO2). 4th International Conference on Materials and Applications for Sensors and Transducers (ICMAST), Jun 2014, Bilbao, Spain. ⟨hal-02048928v2⟩
108 Consultations
93 Téléchargements

Partager

Gmail Facebook X LinkedIn More