Thermal Drift and Chip Size in Capacitive Pressure Sensors - LAAS-Micro Nano Bio Technologies Accéder directement au contenu
Communication Dans Un Congrès Année : 1999

Thermal Drift and Chip Size in Capacitive Pressure Sensors

Résumé

Anodic bonding and anisotropic etching have been used to fabricate silicon / Pyrex capacitive pressure sensors. Their thermal behaviour has been evaluated by 3D finite element structural analysis and measured from-30ºC to 180ºC. Experimental and modelling results have revealed that the thermal coefficient is a strong function of dimensions. In order to minimise the thermal drift due to thermo-mechanical deformations it has been shown that the ratio of the chip and internal cavity widths should be approximately equal to 3/2. Based on this exemplary case, it has been inferred that the best metrological characteristics can be reached by effecting an in-depth structural analysis taking into account not only the active parts of micro devices but also their passive parts.
Fichier principal
Vignette du fichier
Final_Cyril.pdf (226.73 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02170328 , version 1 (01-07-2019)

Identifiants

  • HAL Id : hal-02170328 , version 1

Citer

G Blasquez, X Chauffleur, Patrick Pons, C Douziech, P Favaro, et al.. Thermal Drift and Chip Size in Capacitive Pressure Sensors. Eurosensors XIII, Sep 1999, La Haye, Netherlands. pp.461-464. ⟨hal-02170328⟩
23 Consultations
6 Téléchargements

Partager

Gmail Facebook X LinkedIn More