Computational study on the clamping mechanism in the injection molding machine - Laboratoire d'Ingénierie des Systèmes de Versailles Accéder directement au contenu
Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2022

Computational study on the clamping mechanism in the injection molding machine

Résumé

The clamping mechanism plays an important role in obtaining high-quality products of the injection molding process. The clamping mechanism of the five-point double-toggle has been widely used for the high-speed plastics injection molding machine. The purpose of this paper is to optimize the five-point double-toggle clamping mechanism through multi-body dynamics analysis. This work also provides guidelines and a clear understanding for designing the clamping system in an injection molding machine with various clamping forces. The theoretical calculation has been handled first and then the computational model has been verified in this study. In addition, the effects of clamping forces on the main dimensions, including movable-fixed plate thickness, tie-bar diameter, and average link cross-section have been investigated theoretically and numerically. The results show that the optimal design allows reaching a high force amplified ratio and that the obtained mechanism has good kinematic performance and works steadily with lower energy consumption and lower cost than the preliminary design. Moreover, the relationships between the parameters such as the critical angles of the double-toggle clamping mechanism, the ratio of force amplification, and the stroke of movable mold have been found in this work. The optimized parameters will yield useful knowledge to design and manufacture the clamping mechanism of the microinjection molding machine in practice.
Fichier principal
Vignette du fichier
v1_covered.pdf (649.87 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03775793 , version 1 (16-11-2022)

Identifiants

Citer

van Duong Le, van Thanh Hoang, Quangbang Tao, Lahouari Benabou, Ngoc Hai Tran, et al.. Computational study on the clamping mechanism in the injection molding machine. International Journal of Advanced Manufacturing Technology, 2022, 121 (11-12), pp.7247-7261. ⟨10.1007/s00170-022-09817-6⟩. ⟨hal-03775793⟩
71 Consultations
86 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More