Caractérisation des propriétés d’emploi des aciers thixoforgés : vers la maîtrise du processus de fabrication - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2013

Characterization of employed steels thixoforgés : in order to control the manufacturing process

Caractérisation des propriétés d’emploi des aciers thixoforgés : vers la maîtrise du processus de fabrication

Résumé

The thixoforging process is an innovative forming process for the manufacturing ofcomplex parts in the semi-solid state, in fewer forming steps and with a decreased formingforce. The objective of this work is to characterize the microstructure of different steel grades ateach step of the thixoforging process in order to better understand the influence of the processparameters and the mechanisms of deformation, as the microstructure of the material in thesemi-solid state, especially the volume fraction of liquid, is very important. Several 2D and 3Dtechniques (SEM-EDS analyses, CSLM, X-ray microtomography) have been used to evaluatethe liquid fraction of various steel grades (M2, C38LTT and 100Cr6). The results for M2 steelshow a good agreement between 2D SEM - EDS observations and 3D X-ray microtomographyafter quenching, which proves that both techniques are efficient in characterizing high-alloyedsteels in the semi-solid state. The CSLM technique is used to observe the microstructuredirectly at high temperature, with the apparition of liquid and the solidification. Thixoforgingexperiments are finally performed in order to study the influence of the process parameters onthe microstructure: the final part geometry, the material flow etc. After analyzing themicrostructure of the thixoforged parts, some mechanisms of material flow are proposed.Moreover, by comparing the results between the thixoforging experiments and the hot forgingsimulations, it is found that the material flow is very different from that of hot forging process,which results from the material behavior. The latter is very sensitive to the process parameters;an accurate process control is necessary.
Le thixoforgeage est un procédé de mise en forme innovant permettant l'élaborationde pièces complexes à l'état semi-solide. Il nécessite moins d'opérations et des efforts plusfaibles que les autres procédés de mise en forme plus classiques. L'objectif de ce travail et decaractériser la microstructure de plusieurs nuances d'acier à chaque étape du procédé afin demieux comprendre l'influence des différents paramètres et mécanismes de déformation, car lamicrostructure à l'état semi-solide, et en particulier la fraction de liquide, est très importante.Plusieurs techniques 2D et 3D (analyses MEB-EDS, CSLM, microtomographie X) ont étéutilisées pour évaluer la fraction de liquide des aciers étudiés (M2, C38LTT et 100Cr6). Lesrésultats obtenus pour l'acier M2 montrent une bonne corrélation entre les observations 2DMEB-EDS et les analyses 3D en microtomographie après trempe, ce qui indique que ces deuxtechniques sont très efficaces pour caractériser l'état semi-solide des aciers fortement alliés. Lemicroscope CSLM est utilisé quant à lui pour observer directement l'état semi-solide à hautetempérature : apparition du liquide, processus de solidification etc. Des essais de thixoforgeageont ensuite été réalisés pour étudier l'influence des différents paramètres du procédé sur lamicrostructure, la géométrie finale des pièces, les écoulements de matière etc. Après avoiranalysé la microstructure des pièces thixoforgées, des mécanismes permettant d'expliquer lesécoulements de matière sont proposés. Qui plus est, la comparaison avec la simulation duprocédé de forgeage à chaud montre que ces écoulements sont très différents, ce qui est dû aucomportement du matériau. Ce dernier est très sensible aux paramètres du procédé : il estdonc nécessaire de bien maîtriser et contrôler toutes les étapes lors de la mise en forme.
Fichier principal
Vignette du fichier
GU.pdf (22.76 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

pastel-00935539 , version 1 (23-01-2014)

Identifiants

  • HAL Id : pastel-00935539 , version 1

Citer

Guochao Gu. Caractérisation des propriétés d’emploi des aciers thixoforgés : vers la maîtrise du processus de fabrication. Autre. Ecole nationale supérieure d'arts et métiers - ENSAM, 2013. Français. ⟨NNT : 2013ENAM0002⟩. ⟨pastel-00935539⟩
335 Consultations
669 Téléchargements

Partager

Gmail Facebook X LinkedIn More