J. Campbell, P. P. Love, F. A. Martin, and S. O. Et-rafique, Bearings for reciprocating machinery: a review of the present state of theoretical, experimental and service knowledge, Conference on Lubrication and Wear, 1967.
DOI : 10.1243/PIME_CONF_1967_182_008_02

J. F. Booker, Dynamically Loaded Journal Bearings: Mobility Method of Solution, Journal of Basic Engineering, vol.87, issue.3, p.537, 1965.
DOI : 10.1115/1.3650602

B. Fantino, Influence des Défauts de Forme dans la Lubrification Hydrodynamique, Thèse de troisième cycle de l, 1973.

B. Fantino, Influence des Défauts de Forme et des Déformés Elastiques des Surfaces en Lubrification Hydrodynamique sous Charge Statiques et Dynamiques, Thèse de doctorat d'état n° 1-DE-8122, 1981.

B. Fantino, M. Godet, and J. Et-frêne, Dynamic Behaviour of an Elastic Connecting???Rod Bearing ??? Theoretical Study, SAE Technical Paper Series, pp.23-32, 1983.
DOI : 10.4271/830307

B. Fantino and J. Et-frêne, Comparison of Dynamic Behavior of Elastic Connecting-Rod Bearing in Both Petrol and Diesel Engines, Journal of Tribology, vol.107, issue.1, pp.87-91, 1985.
DOI : 10.1115/1.3261007

K. P. Oh, The Numerical Solution of Dynamically Loaded Elastohydrodynamic Contact as a Nonlinear Complementary Problem, Transaction of the ASME, pp.88-95, 1984.

K. G. Murty, Note on a Bard-Type Scheme for Solving the Complementarity Problems, Opsearch, vol.11, pp.123-130, 1974.

P. K. Goenka, Dynamically Loaded Journal Bearings: Finite Element Method Analysis, Transaction of the ASME, pp.429-439, 1984.
DOI : 10.1115/1.3260954

K. P. Oh and P. K. Et-goenka, The Elastohydrodynamic Solution of Journal Bearings Under Dynamic Loading, Journal of Tribology, vol.107, issue.3, pp.389-395, 1985.
DOI : 10.1115/1.3261088

P. K. Goenka and K. P. Et-oh, An Optimum Short Bearing Theory for the Elastohydrodynamic Solution of Journal Bearings, Journal of Tribology, vol.108, issue.2, pp.294-299, 1986.
DOI : 10.1115/1.3261180

T. W. Bates, B. Fantino, L. Launay, and J. Frêne, Oil Film Thickness in an Elastic Connecting-Rod Bearing: Comparison Between Theory and Experiment by Total Capacitance Method, SAE Paper No, vol.880679, 1988.

A. Kumar, J. F. Booker, and P. K. Goenka, Dynamically loaded journal bearings: a modal approach to EHL design analysis, Tribology Design of Machine Elements, 1989.
DOI : 10.1016/S0167-8922(08)70207-4

B. Jacobson and L. Floberg, The Finite Journal Bearings Considering Vaporization, Chalmers Tekniska Hoegskolas Hnndlingar, vol.190, pp.1-116, 1957.

K. Olsson, On Hydrodynamic Lubrication with Special Reference to Nonstationary cavitation, 1974.

H. G. Elrod, A Cavitation Algorithm, Journal of Lubrication Technology, vol.103, issue.3, pp.350-354, 1981.
DOI : 10.1115/1.3251669

A. Kumar and J. F. Booker, A Finite Element Cavitation Algorithm: Application/Validation, Journal of Tribology, vol.113, issue.2, pp.255-261, 1991.
DOI : 10.1115/1.2920614

A. Kumar and J. F. Booker, A Finite Element Cavitation Algorithm, Journal of Tribology, vol.113, issue.2, pp.276-286, 1991.
DOI : 10.1115/1.2920617

D. Bonneau and M. Hajjam, Mod??lisation de la rupture et de la reformation des films lubrifiants dans les contacts ??lastohydrodynamiques, Revue Europ??enne des ??l??ments Finis, vol.122, issue.2, pp.679-704, 2001.
DOI : 10.1080/12506559.2001.9737566

M. B. Aitken and H. Mccallion, Elastohydrodynamic Lubrication of Big-End Bearings Part 1: Theory, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.205, issue.2, pp.99-106, 1991.
DOI : 10.1243/PIME_PROC_1991_205_097_02

D. Bonneau, D. Guines, J. Frêne, and J. Toplosky, EHD Analysis, Including Structural Inertia Effects and a Mass-Conserving Cavitation Model, Journal of Tribology, vol.117, issue.3, pp.540-547, 1995.
DOI : 10.1115/1.2831288

T. Garnier, Etude Elastohydrodynamique de la Liaison Carter/Vilebrequin d'un Moteur Thermique à Quatre Cylindres en Ligne, Thèse de doctorat de l'Université de Poitiers, 1997.

D. Bonneau, A. M. Chomat, T. Garnier, and C. Grente, Influence of the Engine Block/Crankshaft Design on the 3D EHD Lubrication of a Four Cylinder Inline Automotive Engine, IFToMM Symposium, 1999.

G. Knoll, J. Lang, and A. Rienacker, Transient EHD Connecting Rod Analysis: Full Dynamic Versus Quasi-Static Deformation, Journal of Tribology, vol.118, issue.2, pp.349-355, 1995.
DOI : 10.1115/1.2831308

T. Osaza, T. Noda, and T. Konomi, Elastohydrodynamic Lubrication Model of Connecting Rod Big-End Bearings: Application to Real Engines, Journal of Tribology, vol.119, issue.3, pp.568-578, 1997.
DOI : 10.1115/1.2833538

K. Ushijima, T. Arai, T. Goto, and S. Aoyama, A study on engine bearing performance using EHL analysis and experimental analysis, JSAE Review, vol.18, issue.3, pp.263-269, 1997.
DOI : 10.1016/S0389-4304(97)00020-9

Y. Okamoto, M. Hanahashi, and T. Katagiri, Effects of Housing Stiffness and Bearing Dimension on Engine Bearing Performance by Elastohydrodynamic Lubrication Analysis, Journal of Tribology, vol.122, issue.4, pp.697-704, 2000.
DOI : 10.1115/1.1314604

F. A. Stefani and R. A. , Finite Element Analysis of Dynamically Loaded Journal Bearings: Influence of the Bolt Preload, Journal of Tribology, vol.124, issue.3, pp.444-454, 2002.
DOI : 10.1115/1.1454102

D. Wang, G. Keith, and Q. Yang, Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part I: Rod and Bearing Deformation, Tribology Transactions, vol.123, issue.2, pp.280-289, 2004.
DOI : 10.4271/930617

D. Wang, G. Keith, and Q. Yang, Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part II: Lubrication Performance Evaluation for Non-Circular Bearings, Tribology Transactions, vol.106, issue.2, pp.290-298, 2004.
DOI : 10.1016/S0043-1648(96)07474-1

J. D. Mcivor and D. N. Fenner, An Evolution of Eight-Node Quadrilateral Finite Elements for the Analysis of a Dynamically Loaded Hydrodynamic Journal Bearing, Proc. Inst

J. D. Mcivor and D. N. Fenner, Finite Element Analysis of Dynamically Loaded Flexible Journal Bearings: A Fast Newton-Raphson Method, Journal of Tribology, vol.111, issue.4, pp.597-604, 1988.
DOI : 10.1115/1.3261983

B. A. Gecim, Non-Newtonian Effects of Multigrade Oils on Journal Bearing Performance, Tribology Transactions, vol.14, issue.3, pp.384-394, 1990.
DOI : 10.1115/1.3261638

I. K. Dien and H. G. Elrod, A Generalised Steady-State Reynolds Equation for Non- Newtonian Fluids with Application to Journal Bearings, ASME Journal of Lubrication Technology, vol.104, pp.385-390, 1983.

R. I. Tanner, Non-Newtonian Lubrication Theory and its Application to the Short Journal Bearing, Australian J. of Applied Science, vol.14, pp.29-36, 1963.

S. Wada and H. Hayashi, Hydrodynamic Lubrication of Journal Bearings by Pseudo-Plastic Lubricants : Part 1, Theoretical Studies, Bulletin of JSME, vol.14, issue.69, pp.268-286, 1971.
DOI : 10.1299/jsme1958.14.268

A. Rastogi and R. K. Gupta, Lubricant elasticity and the performance of dynamically loaded short journal bearings, Journal of Rheology, vol.34, issue.8, pp.1337-1356, 1990.
DOI : 10.1122/1.550090

A. Rastogi and R. K. Gupta, Accounting for lubricant shear thinning in the design of short journal bearings, Journal of Rheology, vol.35, issue.4, pp.589-603, 1991.
DOI : 10.1122/1.550182

R. S. Paranjpe, Analysis of Non-Newtonian Effects in Dynamically Loaded Finite Journal Bearings Including Mass Conserving Cavitation, Journal of Tribology, vol.114, issue.4, pp.736-746, 1992.
DOI : 10.1115/1.2920943

F. Lemaître and A. Berker, Non-Newtonian cavitation analysis in journal bearings, Journal of Non-Newtonian Fluid Mechanics, vol.59, issue.1, pp.31-48, 1995.
DOI : 10.1016/0377-0257(95)01350-5

J. H. Kim and A. A. Seireg, Thermohydrodynamic Lubrication Analysis Incorporating Bingham Rheological Model, Journal of Tribology, vol.122, issue.1, pp.137-146, 2000.
DOI : 10.1115/1.555336

C. Zhang and H. S. Cheng, Transient Non-Newtonian Thermohydrodynamic Mixed Lubrication of Dynamically Loaded Journal Bearings, Journal of Tribology, vol.122, issue.1, pp.156-161, 2000.
DOI : 10.1115/1.555338

C. Zhang, TEHD Behavior of Non-Newtonian Dynamically Loaded Journal Bearings in Mixed Lubrication for Direct Problem, Journal of Tribology, vol.124, issue.1, pp.178-185
DOI : 10.1115/1.1396342

P. Wang, T. G. Keith, and K. Vaidyanathan, Non-Newtonian Effects on the Performance of Dynamically Loaded Elliptical Journal Bearings Using a Mass-Conserving Finite Element Cavitation Algorithm, Tribology Transactions, vol.103, issue.4, pp.533-542, 2001.
DOI : 10.1080/10402008908981882

P. Wang, T. G. Keith, and K. Vaidyanathan, Combined Surface Roughness Pattern and Non-Newtonian Effects on the Performance of Dynamically Loaded Journal Bearings, Tribology Transactions, vol.45, issue.1, pp.1-10, 2002.
DOI : 10.1080/10402000208982515

S. Piffeteau, Modélisation du Comportement Thermoélastohydrodynamique d'un Palier de Tête de Bielle Soumis à un Chargement Dynamique, Thèse de doctorat de l'Université de Poitiers, 1999.

J. Bouyer, Etude des performances thermoélastohydrodynamique de paliers soumis à des conditions sévères, Thèse de troisième cycle de l'Université de Poitiers, 2003.

P. Michaud, Modélisation Thermoélastohydrodynamique Tridimensionnelle des Paliers de Moteurs Mise en place d'un Banc d'Essais pour Paliers Sous Conditions Sévères, 2004.

H. A. Ezzat and S. M. Rohde, Thermal Transients in Finite Slider Bearings, Journal of Lubrication Technology, vol.96, issue.3, pp.315-321, 1974.
DOI : 10.1115/1.3451951

R. Boncompain and J. Frêne, Thermohydrodynamic of Finite Journal Bearing ? Static and Dynamic Characteristics, Proc. of the 6 th Leeds-Lyon Symposium on Tribology, pp.34-42, 1979.

C. M. Ettles and . Mcc, Transient thermoelastic effects in fluid film bearings, Wear, vol.79, issue.1, pp.53-71, 1982.
DOI : 10.1016/0043-1648(82)90203-4

J. D. Kinght and B. L. , Analysis of Axially Grooved Journal Bearings with Heat Transfer Effects, ASLE Transaction, vol.30, pp.316-323, 1987.

H. Moes, P. B. Ten-hoeve, and J. Van-der-helm, Thermal Effects in Dynamically Loaded Flexible Journal Bearings, Journal of Tribology, vol.111, issue.1, pp.49-55, 1989.
DOI : 10.1115/1.3261878

M. M. Khonsari and S. H. Wang, Notes on Transient THD Effects in a Lubricating Film, Tribology Transactions, vol.181, issue.1, pp.369-378, 1992.
DOI : 10.1115/1.3261550

M. D. Pascovici, M. M. Khonsari, and J. Y. Jang, On the Modeling of a Thermomechanical Seizure, Journal of Tribology, vol.117, issue.4, pp.744-747, 1995.
DOI : 10.1115/1.2831547

R. S. Paranjpe and T. Han, A Transient Thermohydrodynamic Analysis Including Mass Conserving Cavitation for Dynamically Loaded Journal Bearings, Journal of Tribology, vol.117, issue.3, pp.369-378, 1995.
DOI : 10.1115/1.2831261

C. Zhang, J. X. Jiang, and H. S. Cheng, A transient thermohydrodynamic analysis of dynamically loaded finite journal bearings with rough surface including mass conserving cavitation, Proc. of the 25 th Leeds-Lyon Symposium on Tribology, pp.367-378, 1998.
DOI : 10.1016/S0167-8922(99)80057-1

X. Wang, S. Wen, and C. Gui, An Analysis of the Thermoelastodydrodynamic Performance of Dynamically Loaded Bearing, Proc. of Asiatrib 98, pp.25-29, 1998.

B. Kucinschi, Etude des Instabilités Thermiques des Paliers à Frottement Fluide, Thèse de troisième cycle de l, 1998.

M. D. Pascovici, B. Kucinschi, and M. M. Khonsari, A Thermohydrodynamic Model for the Early Seizure, Journal of The Balkan Tribological Association, vol.6, pp.78-88, 2000.

B. J. Kim and K. W. Kim, Thermo-Elastohydrodynamic Analysis of Connecting Rod Bearing in Internal Combustion Engine, Journal of Tribology, vol.123, issue.3, pp.444-454, 2001.
DOI : 10.1115/1.1353181

J. Frêne, D. Nicolas, B. Degueurce, D. Berthe, and M. Godet, Lubrification Hydrodynamique, Paliers et Butées Editions Eyrolles, 1990.

M. D. Pascovici and T. Cicone, Elemente de Tribologie, Bren, 2001.

M. Hajjam and D. Bonneau, Elastohydrodynamic analysis of lip seals with microundulations, Proceedings of the IMECHE Engineers, pp.13-21, 2004.
DOI : 10.1243/135065004322842799

J. Mitsui, A study of thermohydrodynamic lubrication in a circular journal bearing, Tribology International, vol.20, issue.6, pp.331-340, 1987.
DOI : 10.1016/0301-679X(87)90061-2

J. Huetz and J. Petit, Notions de Transfert Thermique par Convection, pp.1540-1541, 1990.

A. Alexandre and L. Tomaselli, Analyse des Transferts Energétiques dans les Moteurs Automobiles, 2004.

B. O. Jacobson and H. B. , High-Speed Motion Picture Camera Experiments of Cavitation in Dynamically Loaded Journal Bearings, Journal of Lubrication Technology, vol.105, issue.3, pp.446-452, 1983.
DOI : 10.1115/1.3254639

J. Frêne, R. Desailly, and B. Fantino, Hydrodynamics of an Elastic Connecting-rod Bearing: Comparison of Theoretical and Experimental Results, Proc. Of the 5 th Leeds-Lyon Symposium on Tribology, pp.329-336, 1979.

J. Pierre-eugène, Etude Elastohydrodynamique d'un Palier de Tête de Bielle sous Charge Statique, Thèse de troisième cycle de l'Université de Poitiers, 1982.

J. Pierre-eugène, J. Frêne, B. Fantino, G. Roussel, J. Du-parquet et al., Theory and Experiments on Elastic Connecting-Rod Bearings Under Steady State Conditions" 9 th Leeds- Lyon Symposium on Tribology, pp.49-54, 1983.

T. W. Bates and P. G. Evans, Effect of Oil Rheology on Journal Bearing Performance: Part 1 Instrumentation of the Big-End Bearing of a Fired Engine, Proc.of the JSLE International Tribology Conference, pp.8-10, 1985.

T. W. Bates, S. Benwell, and P. G. Evans, Effect of Oil Rheology on Journal Bearing Performance: Part 2 - Oil Film Thickness in the Big-End Bearing of an Operating Engine, SAE Technical Paper Series, 1987.
DOI : 10.4271/871272

T. W. Bates and S. Benwell, Effect of Oil Rheology on Journal Bearing Performance Part 3???Newtonian Oils in the Connecting-Rod Bearing of an Operating Engine, SAE Technical Paper Series, 1988.
DOI : 10.4271/880679

T. Masuda, K. Ushijima, and K. Hamai, A Measurement of Oil Film Pressure Distribution in Connecting Rod Bearing With Test Rig, Tribology Transactions, vol.27, issue.1, pp.71-76, 1992.
DOI : 10.1115/1.3261180

T. Ozasa, M. Yamamoto, S. Susuki, Y. Nozawa, and T. Konomi, Elastohydrodynamic Lubrication Model of Connecting Rod Big End Bearings; Comparison with Experiments by Diesel Engine, SAE Technical Paper Series, 1995.
DOI : 10.4271/952549

S. Susuki, T. Ozasa, M. Yamamoto, Y. Nozawa, T. Noda et al., Temperature Distribution and Lubrication Characteristics of Connecting Rod Big End Bearings, SAE Technical Paper Series, 1995.
DOI : 10.4271/952550

S. Susuki, T. Ozasa, M. Yamamoto, T. Noda, and T. Konomi, Analysis of Con-Rod Big-End Bearing Lubrication on the Basis of Oil Supply Rate, SAE Technical Paper Series, 1998.
DOI : 10.4271/982439

Y. Mihara, T. Hayashi, M. Nakamura, and T. Someya, Development of measuring method for oil film pressure of engine main bearing by thin film sensor, JSAE Review, vol.16, issue.2, pp.125-130, 1995.
DOI : 10.1016/0389-4304(95)00006-S

Y. Mihara, M. Kajiwara, T. Fukamatsu, and T. Someya, Study on the measurement of oil-film pressure of engine main bearing by thin-film sensor ? The influence of bearing deformation on pressure sensor output under engine operation, JSAE Review, vol.17, issue.3, pp.281-286, 1996.
DOI : 10.1016/0389-4304(96)00022-7

M. Cho, D. Han, and J. Choi, Oil Film Thickness in Engine Connecting-Rod Bearing With Consideration of Thermal Effects: Comparison Between Theory and Experiment, Journal of Tribology, vol.121, issue.4, pp.901-907, 1999.
DOI : 10.1115/1.2834153

M. J. Goodwin, J. Nikolajsen, and P. J. Ogrodnik, Experimental measurement of big-end bearing journal orbits, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.2, issue.3, pp.219-228, 2000.
DOI : 10.1243/1350650001543124

O. Mian, A. Parker, D. D. Williams, and B. , Measured Crankshaft Bearing Oil Flow and Temperatures with a Full and Partial Groove Main Bearing, SAE Technical Paper Series, 1341.
DOI : 10.4271/2000-01-1341

H. Moreau, Mesures des Epaisseurs de Film d'Huile dans les Paliers de Moteurs Automobile et Comparaison avec les Résultats Théoriques, Thèse de doctorat de l'Université de Poitiers, 2001.

K. Sato, K. Makino, and K. Machida, A Study of Oil Film Pressure Distribution on Connecting Rods Big Ends, SAE Technical Paper Series, 2002.
DOI : 10.4271/2002-01-0296