Extraction de modèles thermiques simplifiés des machines électriques à partir d’un calcul du champ de températures - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2011

Extraction of simplified equivalent thermal models of electrical machines from temperature field calculations

Extraction de modèles thermiques simplifiés des machines électriques à partir d’un calcul du champ de températures

Résumé

The temperature rise is one of the main parameters limiting the power of electrical machine. In fact in the stator windings the temperature rise decreases the performances of its insulation system and it can reduce the life time of the motors and it may even lead to the motor failure. Appropriate models of the windings are necessary to find the hot spot of the machine. The work proposed in this thesis focuses on the extraction of simplified thermal models in order to evaluate the temperature distribution. An approach based on a numerical method (Finite Integration Technique) has been developed allowing the identification of the thermal model parameters. As a first step the homogenization of the winding is necessary to obtain the thermal model of the stator slot which has a complex heterogeneous structure requiring careful modeling. The objective is then to replace the conductors and the resin by one homogenous material that reproduces a similar thermal behavior. Several homogenization techniques are used to determine the effective thermal conductivity of the composite material. We are also interested to study different configurations or distributions of the conductors in the slot to limit heat dissipation in the windings of electrical machines. The second part of this thesis presents a method, based on the Finite Integration Technique (FIT) for the discretization that gives us an equivalent thermal model allowing the evaluation of transient temperature evolutions in the slot with low calculation cost.
L’élévation de la température est l’un des principaux paramètres limitant la puissance nominale des machines électriques. La température atteinte au niveau des bobinages, peut avoir de graves conséquences sur le système d’isolation des enroulements et peut ainsi réduire la durée de vie des machines électriques. Le travail de recherche effectué dans cette thèse s’attache à l’extraction de modèles thermiques simplifiés permettant la prédiction des niveaux d’échauffement. Nous avons alors mis en place une démarche basée sur une méthode numérique (Finite Intgeration Technique) qui permet une identification naturelle des grandeurs du modèle thermique. Cette démarche nécessite d’homogénéiser le bobinage en le remplaçant par un seul matériau homogène équivalent permettant de reproduire le même comportement thermique du cas réel du bobinage. Pour ce faire, plusieurs techniques d’homogénéisation ont été employées. Nous nous sommes également intéressés aux différentes configurations des conducteurs dans l’encoche en vue d’obtenir une meilleure évacuation de la chaleur dans le bobinage des machines électriques. La démarche proposée dans ce travail a pout objectif d’obtenir des modèles thermiques simplifiés qui peuvent être réduit à un seul nœud pour calculer la température du point chaud. La validité des modèles est évaluée par comparaison aux éléments finis en considérant deux formes géométriques de l’encoche : une encoche simple puis une encoche de géométrie plus complexe que l’on retrouve dans une machine à commutation de flux.
Fichier principal
Vignette du fichier
VA2_IDOUGHI_MOHAND_LAID_09122011.pdf (4.95 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00664666 , version 1 (31-01-2012)

Identifiants

  • HAL Id : tel-00664666 , version 1

Citer

Mohand Laïd Idoughi. Extraction de modèles thermiques simplifiés des machines électriques à partir d’un calcul du champ de températures. Autre [cond-mat.other]. Université Paris Sud - Paris XI, 2011. Français. ⟨NNT : 2011PA112291⟩. ⟨tel-00664666⟩
509 Consultations
3562 Téléchargements

Partager

Gmail Facebook X LinkedIn More