J. Barroso, M. Carneiro, and E. Macau, Bouncing ball problem: Stability of the periodic modes, Physical Review E, vol.79, issue.2, p.26206, 2009.
DOI : 10.1103/PhysRevE.79.026206

M. Barthod, Contribution à l'étude des bruits dit de graillonnement dans les boîtes de vitesses automobiles, Thèse de doctorat de l'Ecole Nationale Supérieure des Arts et Métiers, 2004.

M. Barthod, B. Hayne, J. Tébec, and J. Pin, Experimental study of dynamic and noise produced by a gearing excited by a multi-harmonic excitation, Applied Acoustics, vol.68, issue.9, pp.68-982, 2007.
DOI : 10.1016/j.apacoust.2006.04.012

M. Barthod, B. Hayne, J. Tébec, and J. Pin, Experimental study of gear rattle excited by a multi-harmonic excitation, Applied Acoustics, vol.68, issue.9, pp.1003-1025, 2007.
DOI : 10.1016/j.apacoust.2006.04.011

M. Barthod, J. Tébec, and M. Gizard, Etude du bruit dit de graillonnement dans les boîtes de vitesses automobiles -Study of the rattle noise in automotive gearboxes, Mécanique & Industries, pp.99-106, 2003.

M. Barthod, B. Hayne, and J. Tébec, Auditory Perception of Noise Known as Rattle in Gearboxes, Acta Acustica united with Acustica, vol.91, pp.180-191, 2005.

K. Blair, C. M. Krousgrill, and T. Farris, HARMONIC BALANCE AND CONTINUATION TECHNIQUES IN THE DYNAMIC ANALYSIS OF DUFFING'S EQUATION, Journal of Sound and Vibration, vol.202, issue.5, pp.717-731, 1997.
DOI : 10.1006/jsvi.1996.0863

M. Bozca and P. Fietkau, Empirical model based optimization of gearbox geometric design parameters to reduce rattle noise in an automotive transmission, Mechanism and Machine Theory, pp.45-1599, 2010.
DOI : 10.1016/j.mechmachtheory.2010.06.013

R. Brancati, E. Rocca, and R. Russo, A gear rattle model accounting for oil squeeze between the meshing gear teeth, Proceedings of the Institution of Mechanical Engineers, pp.1075-1083, 2005.
DOI : 10.1243/095440705X34757

R. Brancati, E. Rocca, and R. Russo, An analysis of the automotive driveline dynamic behaviour focusing on the influence of the oil squeeze effect on the idle rattle phenomenon, Journal of Sound and Vibration, vol.303, issue.3-5, 2007.
DOI : 10.1016/j.jsv.2007.02.008

C. Chae, K. Won, and K. Kang, Measurement of transmission rattle sensitivity and calculation of driveline torsional vibration, pp.1-1785, 2005.

C. Changenet, X. Oviedo-marlot, and P. Velex, Power Loss Predictions in Geared Transmissions Using Thermal Networks-Applications to a Six-Speed Manual Gearbox, Journal of Mechanical Design, vol.128, issue.3, pp.618-625, 2006.
DOI : 10.1115/1.2181601

URL : https://hal.archives-ouvertes.fr/hal-00378106

C. Chang-kook, W. Kwang-min, and K. Koo-tae, Measurement of Transmission Rattle Sensitivity and Calculation of Driveline Torsional Vibration for Gear Rattle Analysis, pp.2005-2006, 2005.

B. Cochelin, N. Damil, and M. Potier-ferry, Méthode asymptotique numérique, 2007.

B. Cochelin and C. Vergez, A high order purely frequency-based harmonic balance formulation for continuation of periodic solutions, Journal of Sound and Vibration, vol.324, issue.1-2, pp.243-262, 2009.
DOI : 10.1016/j.jsv.2009.01.054

URL : https://hal.archives-ouvertes.fr/hal-00315288

P. Couderc, Comportement dynamique des chaines de transmission automobiles, 1997.

P. Couderc, VEHICLE DRIVELINE DYNAMIC BEHAVIOUR: EXPERIMENTATION AND SIMULATION, Journal of Sound and Vibration, vol.218, issue.1, 1998.
DOI : 10.1006/jsvi.1998.1808

M. De-la-cruz, S. Theodossiades, and H. Rahnejat, An investigation of manual transmission drive rattle, Proceedings of the Institution of Mechanical Engineers, pp.167-181, 2010.
DOI : 10.1142/p553

D. Souza, S. Caldas, L. Viana, R. Batista, M. Kapitaniak et al., Noise-induced basin hopping in a gearbox model, Chaos, Solitons & Fractals, vol.26, issue.5, pp.1523-1531, 2005.
DOI : 10.1016/j.chaos.2005.04.033

C. Delprete and C. Rosso, Numerical Analysis of Gear Rattle, SAE Technical Paper Series, pp.2005-2006, 2005.
DOI : 10.4271/2005-01-1786

C. Develay, Etude et réduction du bruit de graillonnement des boîtes de vitesses automobiles, Thèse de doctorat de l'Institut National des Sciences Appliquées de Lyon, 2000.

Y. Diab, F. Ville, C. Changenet, and P. Velex, Analyse des pertes de puissance dans les transmissions par engrenages, M??canique & Industries, vol.9, issue.3, pp.221-225, 2008.
DOI : 10.1051/meca:2008028

URL : https://hal.archives-ouvertes.fr/hal-00506643

S. Dogan, Loose part vibration in vehicule transmissions-Gear rattle, Journal of Engineering and Environmental Science, vol.23, pp.439-454, 1999.

S. Dogan, J. Ryborz, and B. Bertsche, Rattling and clattering noise in automotive transmissions-Simulation of drag torque and noise". Tribology and Interface Engineering Series, pp.109-121, 2003.

P. Eschmann, L. Hasbargen, and K. Weigand, Ball and roller bearings, Theory, design, and application, 1985.

S. Espin, J. Perret-liaudet, and A. Kahraman, ??tude th??orique et exp??rimentale du comportement non-lin??aire d'un engrenage droit induit par le jeu entre dents, Mécanique & Industries, pp.357-364, 2007.
DOI : 10.1051/meca:2007058

R. Everson, Chaotic dynamics of a bouncing ball, Physica D: Nonlinear Phenomena, vol.19, issue.3, pp.355-383, 1986.
DOI : 10.1016/0167-2789(86)90064-3

Q. Feng and F. Pfeiffer, STOCHASTIC MODEL ON A RATTLING SYSTEM, Journal of Sound and Vibration, vol.215, issue.3, pp.439-453, 1998.
DOI : 10.1006/jsvi.1998.1646

A. Forcelli and C. Grasso, The transmission gear rattle noise parametric sensitivity Study, pp.2004-2005, 2004.

T. Fujimoto and T. Kizuka, An improvement of the prediction method of the idling rattle in manual transmission, SAE Technical Paper, 1164.

T. Fujimoto and T. Kizuka, Audible Noise Simulation ??? an Attempt to Predict Idling Rattle in Manual Transmissions, SAE Technical Paper Series, pp.2003-2004, 2003.
DOI : 10.4271/2003-01-0674

Z. Gao, K. Saine, M. Wollström, and U. Carlsson, Diesel engine gear train noise

W. Goldsmith, Impact, the theory and physical behaviour of colliding solids, E, 1960.

C. Halse, W. Eddie, M. Bernardo, and M. Homer, Coexisting solutions and bifurcations in mechanical oscillators with backlash, Journal of Sound and Vibration, vol.305, issue.4-5, pp.4-5, 2007.
DOI : 10.1016/j.jsv.2007.05.010

S. Harris, Dynamic loads on the teeth of spur gears, Proceedings of the Institution of Mechanical Engineering, pp.87-112, 1958.
DOI : 10.1243/PIME_PROC_1958_172_017_02

T. Harris, Rolling Bearing Analysis, 2001.
DOI : 10.1115/1.3617048

R. Herbert and D. Mcwhannell, Shape and Frequency Composition of Pulses From an Impact Pair, Journal of Engineering for Industry, vol.99, issue.3, pp.513-518, 1977.
DOI : 10.1115/1.3439270

L. Iremescu, I. Musca, and S. Alaci, Aspects theoriques et expérimentaux concernant le coefficient de restitution " . The annals of university « Dunarea De Jos » of Galati, pp.1221-4590, 2005.

A. Kahraman and R. Singh, Non-linear dynamics of a spur gear pair, Journal of Sound and Vibration, vol.142, issue.1, pp.49-75, 1990.
DOI : 10.1016/0022-460X(90)90582-K

E. Kanso and P. Papadopoulos, Dynamics of pseudo-rigid ball impact on rigid foundation, International Journal of Non-Linear Mechanics, vol.39, issue.2, pp.299-309, 2004.
DOI : 10.1016/S0020-7462(02)00189-0

T. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, SAE Technical Paper Series, 1553.
DOI : 10.4271/2001-01-1553

H. Lankarani and P. Nikravesh, A Contact Force Model With Hysteresis Damping for Impact Analysis of Multibody Systems, Journal of Mechanical Design, vol.112, issue.3, pp.369-376, 1990.
DOI : 10.1115/1.2912617

J. Ligier and E. Baron, Acyclisme et vibrations, applications aux moteurs thermiques et aux transmissions, 2000.

J. Luck and A. Mehta, Bouncing ball with a finite restitution: Chattering, locking, and chaos, Physical Review E, vol.48, issue.5, p.3988, 1993.
DOI : 10.1103/PhysRevE.48.3988

A. Luo and R. Han, The dynamics of a bouncing ball with a sinusoidally vibrating table revisited, Nonlinear Dynamics, vol.154, issue.1, pp.1-18, 1996.
DOI : 10.1007/BF00114795

. Nevzat¸hnevzat¸h and D. Houser, Mathematical models used in gear dynamics-A review, 1988.

C. Padmanabhan, R. Barlow, T. Rook, and R. Singh, Computational Issues Associated with Gear Rattle Analysis, Journal of Mechanical Design, vol.117, issue.1, pp.185-192, 1995.
DOI : 10.1115/1.2826105

C. Padmanabhan, R. Barlow, T. Rook, and R. Singh, Computational Issues Associated with Gear Rattle Analysis, Part II -Evaluation criteria for numerical algorithms, Journal of Mechanical Design, vol.117, issue.1, pp.505-512, 1995.

C. Padmanabhan and R. Singh, Influence of clutch design on the reduction and perception of automotive transmission rattle noise, Proceeding of noise con 93, pp.605-612, 1993.

C. Padmanabhan, T. Rook, and R. Singh, Modeling of Automotive Gear Rattle Phenomenon: State of the Art, SAE Technical Paper Series, pp.2332-2343, 1995.
DOI : 10.4271/951316

S. Seetharaman, A. Kahraman, M. Moorhead, and T. Petry-johnson, Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation, Journal of Tribology, vol.131, issue.2, p.22202, 2009.
DOI : 10.1115/1.3085942

R. Seifried, W. Schiehlen, and P. Eberhard, Numerical and experimental evaluation of the coefficient of restitution for repeated impacts, International Journal of Impact Engineering, vol.32, issue.1-4, pp.1-4, 2005.
DOI : 10.1016/j.ijimpeng.2005.01.001

R. Seydel, Practical Bifurcation and Stability Analysis From Equilibrium to Chaos, 1994.

R. Seydel, Nonlinear computation, Journal of the Franklin Institute, vol.334, pp.5-6, 1997.

R. Singh, H. Xie, and R. Comparin, Analysis of automotive neutral grear rattle, Journal of Sound and Vibration, vol.131, issue.2, 1989.
DOI : 10.1016/0022-460X(89)90485-9

G. Stachowiak and A. Batchelor, Engineering tribology, Tribology International, vol.27, issue.5, 2001.
DOI : 10.1016/0301-679X(94)90034-5

J. Stronge, Impact Mechanics, 2000.
DOI : 10.1017/CBO9780511626432

A. Szadkowski, Mathematical Model and Computer Simulation of Idle Gear Rattle, SAE Technical Paper Series, 1991.
DOI : 10.4271/910641

O. Tangasawi, S. Theodossiades, and H. Rahnejat, Lightly loaded lubricated impacts: Idle gear rattle, Journal of Sound and Vibration, vol.308, issue.3-5, pp.3-5, 2007.
DOI : 10.1016/j.jsv.2007.03.077

URL : https://dspace.lboro.ac.uk/2134/18656

O. Tangasawi, S. Theodossiades, H. Rahnejat, and P. Kelly, Non-linear vibroimpact phenomenon belying transmission idle rattle, Proceedings of the Institution of Mechanical Engineers, pp.222-1909, 2008.

S. Theodossiades, O. Tangasawi, and H. Rahnejat, Gear teeth impacts in hydrodynamic conjunctions promoting idle gear rattle, Journal of Sound and Vibration, vol.303, issue.3-5, pp.3-5, 2007.
DOI : 10.1016/j.jsv.2007.01.034

W. Thistleton, J. Marsh, K. Nelson, and C. Tsallis, Generalized Box-Müller method for generating q-Gaussian random deviates, IEEE Transactions on, vol.53, issue.12, pp.4805-4810, 2007.

Y. Wang, Modeling and Analysis of Automotive Transmission Rattle, SAE Technical Paper Series, pp.97-2054, 1998.
DOI : 10.4271/972054

M. Wang, R. Manoj, and W. Zhao, Gear rattle modelling and analysis for automotive manual transmissions, Proceedings of the Institution of Mechanical Engineers, pp.241-258, 2001.
DOI : 10.1243/0954407011525610

M. Wang, W. Zhao, and R. Manoj, Numerical Modelling and Analysis of Automotive Transmission Rattle, Journal of Vibration and Control, vol.8, issue.7, pp.921-943, 2002.
DOI : 10.1177/10775402029594

G. Weidner and G. Lechner, Rattling vibrations in automotive transmissions, JSME International Conference on Motion and Power Transmission, pp.37-42, 1991.

D. Welbourn, Gear errors and their resultant noise spectra, Proceedings of the Institution of Mechanical Engineers, pp.131-139, 1970.
DOI : 10.1243/PIME_CONF_1969_184_451_02

D. Welbourn, Fundamental Knowledge of Gear Noise-A Survey " . Conference on Noise and Vibrations of Engines and Transmissions, Cranfield Institute of Technology, pp.177-186, 1979.

D. Yang and J. Lin, Hertzian Damping, Tooth Friction and Bending Elasticity in Gear Impact Dynamics, Journal of Mechanisms Transmissions and Automation in Design, vol.109, issue.2, p.189, 1987.
DOI : 10.1115/1.3267437

D. Yang, Z. Sun, J. Perret-liaudet, E. Rigaud, L. Bot et al., A rotary model of spur gear dynamics Journal of Mechanisms, Transmissions, and Automation in DesignInfluence of multiharmonics excitation on rattle noise in automotive gearboxes, Advances in Acoustics and Vibration, 1985.

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, and L. Vary, Experimental and numerical analysis of automotive gearbox rattle noise, Journal of Sound and Vibration, vol.331, issue.13, 2011.
DOI : 10.1016/j.jsv.2012.02.009

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, and L. Vary, Mesure des coefficients de restitution et du couple de traînée sur les pignons fous d'une boîte de vitesses automobiles, 2011.

C. Actes, Actes du 20ème Congrès Français de Mécanique, 2011.

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, and L. Vary, Experimental study of rattle noise in automotive gearboxes, VDI International Conference on Gears, pp.10-16, 2010.

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, and L. Vary, Etude expérimentale du bruit de graillonnement d'une boîte de vitesses automobile, Actes du 18ème Colloque Vibrations, Chocs et Bruit, pp.15-17, 2010.

Y. Kadmiri, J. Perret-liaudet, E. Rigaud, and L. Polac, Automotive rattle noise: some theoretical results in relation with the retained coefficient of restitution law for modelling teeth impacts, Proceedings of MPT2009, pp.174-17905, 2009.

J. Perret-liaudetinvité-), Y. Kadmiri, E. Rigaud, and L. Polac, Automotive rattle noise and effects of the multi-harmonics periodical excitation source, Proceedings InterNoise, vol.2610, pp.10-29, 2008.

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, L. Polac, C. Develay et al., Cliquetis de pignon fou excité par une source périodique multi fréquentielle, Actes du 16ème Colloque Vibrations, pp.6-20, 2008.