Y. Amara, Contribution à la conception et à la commande des machines synchrones à double excitation application au véhicule hybride, Thèse de Doctorat, SATIE ENS Cachan, 2001.

L. Vido, Etude d'actionneurs électriques a double excitation destinées au transport, Thèse de Doctorat, SATIE ENS Cachan, 2004.

A. Takorabet, Dimensionnement d'une machine à double excitation de structure innovante pour une application alternateur automobile. Comparaison à des structures classiques, Thèse de Doctorat, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00505148

S. Hlioui, Étude d'une machine synchrone à double excitation contribution à la mise en place d'une plate-forme de logiciels en vue d'un dimensionnement optimal, Thèse de Doctorat, SATIE ENS Cachan, 2008.

G. Henneberger, J. R. Hadji-minaglou, and R. C. Ciorba, Design and test of permanent magnet synchronous motor with auxiliary excitation winding for electric vehicle application, European Power Electronics Chapter Symposium Lausanne, pp.645-649, 1994.

D. Fodorean, A. Djerdir, I. Viorel, and A. Miraoui, A Double Excited Synchronous Machine for Direct Drive Application—Design and Prototype Tests, IEEE Transactions on Energy Conversion, vol.22, issue.3, pp.656-665, 2007.
DOI : 10.1109/TEC.2007.896279

L. Vido, Y. Amara, M. Gabsi, E. Hoang, and M. Lecrivain, Apport des machines synchrones à double excitation pour la traction automobile : application aux véhicules électriques ou hybrides = Hybrid excitation synchronous machines for electric and hybrid vehicles traction, pp.25-32, 2006.

Y. Amara, Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion, IEEE Transactions on Vehicular Technology, vol.58, issue.5, pp.2137-2149, 2008.
DOI : 10.1109/TVT.2008.2009306

F. Liang, J. M. Miller, and X. Xu, A vehicle electric power generation system with improved output power and efficiency, IEEE Transactions on Industry Applications, vol.35, issue.6, pp.1341-1346, 1999.
DOI : 10.1109/28.806048

Y. Amara, A new topology of hybrid synchronous machine, IEEE Transactions on Industry Applications, vol.37, issue.5, pp.1273-1281, 2001.
DOI : 10.1109/28.952502

Y. Amara, H. B. Ahmed, M. Gabsi, M. Lecrivain, and F. Chabot, Machines synchrones ?? double excitation Analyse et optimisation du fonctionnement pour la traction ??lectrique, Revue internationale de g??nie ??lectrique, vol.7, issue.1-2, pp.163-199, 2004.
DOI : 10.3166/rige.7.163-199

C. Zhao and Y. Yan, A review of development of hybrid excitation synchronous machine, Proc. IEEE Int. Symp. Industrial Electron, pp.857-862, 2005.

A. S. Al-adsani and N. Schofield, Hybrid permanent magnet generators for electric vehicle applications, 2009 IEEE International Electric Machines and Drives Conference, pp.1754-1761, 2009.
DOI : 10.1109/IEMDC.2009.5075440

K. Kamiev, J. Nerg, J. Pyrhönen, and V. Zaboin, Hybrid excitation synchronous generators for island operation, Proc. Int. Conference on Electrical Machines (ICEM2010), pp.1-6, 2010.

L. Vido, Y. Amara, and M. Gabsi, Machines synchrones à double excitation MSDE.: Dossier D 3 525 des techniques de l'ingénieurs Editions T.I, Février, 2011.

E. Hoang, M. Lécrivain, and M. Gabsi, A new structure of a switching flux synchronous polyphased machine with hybrid excitation, 2007 European Conference on Power Electronics and Applications, pp.1-8, 2007.
DOI : 10.1109/EPE.2007.4417204

URL : https://hal.archives-ouvertes.fr/hal-00532995

A. D. Akémakou, Rotary electric machine, especially an alternator for a motor vehicle

E. Sulaiman, T. Kosaka, Y. Tsujimori, and N. Matsui, Design of 12-slot 10-pole permanent magnet flux-switching machine with hybrid excitation for hybrid electric vehicle, Proc. 5th IET Int. Conference on Power Electronics, Machines and Drives (PEMD2010), pp.1-5, 2010.

R. L. Owen, Z. Q. Zhu, and G. W. Jewell, Hybrid-excited flux-switching permanentmagnet machines with iron flux bridges, IEEE Transactions on Magnetics, vol.46, issue.6, pp.1723-1729, 2010.

J. T. Chen, Z. Q. Zhu, S. Iwasaki, and R. P. Deodhar, A Novel Hybrid-Excited Switched-Flux Brushless AC Machine for EV/HEV Applications, IEEE Transactions on Vehicular Technology, vol.60, issue.4, pp.1365-1373, 2011.
DOI : 10.1109/TVT.2011.2132811

W. Hua, M. Cheng, and G. Zhang, A Novel Hybrid Excitation Flux-Switching Motor for Hybrid Vehicles, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4728-4731, 2009.
DOI : 10.1109/TMAG.2009.2022497

L. Li, Etude et Mise au Point d'une Nouvelle Famille d'Alterno-démarreurs pour Véhicules Hybrides et Electriques, Thèse de doctorat, 2011.

H. Bali, Y. Amara, G. Barakat, R. Ibtiouen, and M. Gabsi, Analytical Modeling of Open Circuit Magnetic Field in Wound Field and Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3802-3815, 2010.
DOI : 10.1109/TMAG.2010.2053039

T. Finken and K. Hameyer, Study of Hybrid Excited Synchronous Alternators for Automotive Applications Using Coupled FE and Circuit Simulations, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1598-1601, 2008.
DOI : 10.1109/TMAG.2007.916114

S. Brevet-d-'invention-déposé-par-la-société and . Ag, Machine électrique excité par des aimants permanents, Numéro FR1439764, p.12, 1966.

X. Luo and T. A. Lipo, A synchronous/permanent magnet hybrid AC machine, IEEE Transactions on Energy Conversion, vol.15, issue.2, pp.203-210, 2000.

J. A. Tapia, F. Leonardi, and T. A. Lipo, Consequent-pole permanent-magnet machine with extended field-weakening capability, IEEE Transactions on Industry Applications, vol.39, issue.6, pp.1704-1709, 2003.
DOI : 10.1109/TIA.2003.818993

M. Aydin, T. A. Lipo, and S. Huang, Field controlled axial flux permanent magnet electrical machine, U.S. Patent, pp.46124-46125, 2007.

T. Mizuno, Hybrid excitation type permanent magnet synchronous motor, 1997.

N. Naoe and T. Fukami, Trial production of a hybrid excitation type synchronous machine, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485), 2001.
DOI : 10.1109/IEMDC.2001.939362

C. Liu, K. T. Chau, J. Z. Jiang, and L. Jian, Design of a new outer-rotor permanent magnet hybrid machine for wind power generation, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1494-1497, 2008.

C. Liu, K. T. Chau, and J. Z. Jiang, A Permanent-Magnet Hybrid Brushless Integrated Starter–Generator for Hybrid Electric Vehicles, IEEE Transactions on Industrial Electronics, vol.57, issue.12, pp.4055-4064, 2010.
DOI : 10.1109/TIE.2010.2044128

Z. Zhang, Y. Tao, and Y. Yan, A new hybrid excitation doubly salient brushless DC generator with dual terminal output, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-5, 2010.
DOI : 10.1109/ICELMACH.2010.5608201

Q. Zhang, S. Huang, and G. Xie, Design and Experimental Verification of Hybrid Excitation Machine With Isolated Magnetic Paths, IEEE Transactions on Energy Conversion, vol.25, issue.4, pp.993-1000, 2010.
DOI : 10.1109/TEC.2010.2050322

F. Xinghe and Z. Jibin, Numerical Analysis on the Magnetic Field of Hybrid<newline/> Exciting Synchronous Generator, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4590-4593, 2009.
DOI : 10.1109/TMAG.2009.2023625

C. Yang, H. Lin, J. Guo, and Z. Q. Zhu, Design and Analysis of a Novel Hybrid Excitation Synchronous Machine With Asymmetrically Stagger Permanent Magnet, IEEE Transactions on Magnetics, vol.44, issue.11, pp.4353-4356, 2008.
DOI : 10.1109/TMAG.2008.2001325

Z. Zhang, Y. Yan, S. Yang, and Z. Bo, Principle of Operation and Feature Investigation of a New Topology of Hybrid Excitation Synchronous Machine, IEEE Transactions on Magnetics, vol.44, issue.9, pp.2174-2180, 2008.
DOI : 10.1109/TMAG.2008.2000513

A. D. Akemakou, Double-excitation rotating electrical machine for adjustable defluxing, U.S. Patent, 2006.

S. Scridon, I. Boldea, L. Tutelea, F. Blaajberg, and A. E. Ritchie, BEGA???A Biaxial Excitation Generator for Automobiles: Comprehensive Characterization and Test Results, IEEE Transactions on Industry Applications, vol.41, issue.4, pp.935-945, 2005.
DOI : 10.1109/TIA.2005.851023

I. Boldea, V. Coroban-schramel, G. D. Andreescu, F. Blaajberg, and S. Scridon, BEGA Starter/Alternator&#x2014;Vector Control Implementation and Performance for Wide Speed Range at Unity Power Factor Operation, IEEE Transactions on Industry Applications, vol.46, issue.1, pp.150-158, 2010.
DOI : 10.1109/TIA.2009.2036534

V. Coroban-schramel, I. Boldea, G. D. Andreescu, and F. Blaabjerg, Active-Flux-Based Motion-Sensorless Vector Control of Biaxial Excitation Generator/Motor for Automobiles, IEEE Transactions on Industry Applications, vol.47, issue.2, pp.812-819, 2011.
DOI : 10.1109/TIA.2010.2103350

C. D. Syverson, Hybrid alternator, 1995.

T. Kosaka and N. Matsui, Hybrid excitation machines with powdered iron core for electrical traction drive applications, Proc. Int. Conference on Electrical Machines (ICEM2008), pp.2974-2979, 2008.

T. Kosaka, M. Sridharbabu, M. Yamamoto, and N. Matsui, Design Studies on Hybrid Excitation Motor for Main Spindle Drive in Machine Tools, IEEE Transactions on Industrial Electronics, vol.57, issue.11, pp.3807-3813, 2010.
DOI : 10.1109/TIE.2010.2040560

T. Lecomte, Conception et prédiction du fonctionnement des machines synchrones par CAO.: Dossier D 3 595v2 des techniques de l'ingénieurs, Février, 2008.

M. Lajoie-mazenc, J. Hector, and R. Carlson, Procédé d'analyse des champs électrostatique et électromagnétique dans les structures planes et de révolution : Programme difimedi, COMPUMAG, Conference on the Computation of Magnetic Field, 1978.

N. Boules, Two-Dimensional Field Analysis of Cylindrical Machines with Permanent Magnet Excitation, IEEE Transactions on Industry Applications, vol.20, issue.5, pp.1267-1277, 1984.
DOI : 10.1109/TIA.1984.4504593

N. Boules, Prediction of No-Load Flux Density Distribution in Permanent Magnet Machines, IEEE Transactions on Industry Applications, vol.21, issue.3, pp.633-643, 1985.
DOI : 10.1109/TIA.1985.349720

N. Boules, Design optimization of permanent magnet DC motors, IEEE Transactions on Industry Applications, vol.26, issue.4, pp.786-792, 1990.
DOI : 10.1109/28.56006

H. G. Ittstein, Analytical calculation of the cogging torques of a two-pole permanent-magnet-excited dc motor, Archiv f??r Elektrotechnik, vol.10, issue.4, pp.283-292, 1992.
DOI : 10.1007/BF01579756

Z. Q. Zhu, D. Howe, E. Bolte, and B. Ackermann, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field, IEEE Transactions on Magnetics, vol.29, issue.1, pp.124-135, 1993.
DOI : 10.1109/20.195557

J. Azzouzi, G. Barakat, and B. Dakyo, Quasi-3D analytical modeling of the magnetic field of an axial flux permanent magnet synchronous machine, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., pp.746-752, 2005.
DOI : 10.1109/IEMDC.2003.1210717

B. Ackermann and R. Sottek, Analytische Modellierung der Einrastmomente in permanentmagneterregten Motoren, Electrical Engineering, vol.115, issue.2, pp.117-125, 1995.
DOI : 10.1007/BF01245643

D. L. Trumper, W. J. Kim, and M. E. Williams, Design and analysis framework for linear permanent-magnet machines, IEEE Transactions on Industry Applications, vol.32, issue.2, pp.371-379, 1996.
DOI : 10.1109/28.491486

J. Wang, G. Jewell, and D. Howe, A general framework for the analysis and design of tubular linear permanent magnet machines, IEEE Transactions on Magnetics, vol.35, issue.3, pp.1986-2000, 1999.
DOI : 10.1109/20.764898

T. Lubin, S. Mezani, and A. Rezzoug, Exact Analytical Method for Magnetic Field Computation in the Air Gap of Cylindrical Electrical Machines Considering Slotting Effects, IEEE Transactions on Magnetics, vol.46, issue.4, pp.1092-1099, 2010.
DOI : 10.1109/TMAG.2009.2036257

URL : https://hal.archives-ouvertes.fr/hal-00557548

Z. Q. Zhu, L. J. Wu, and Z. P. Xia, An Accurate Subdomain Model for Magnetic Field Computation in Slotted Surface-Mounted Permanent-Magnet Machines, IEEE Transactions on Magnetics, vol.46, issue.4, pp.1100-1115, 2010.
DOI : 10.1109/TMAG.2009.2038153

Y. Amara and G. Barakat, Analytical Modeling of Magnetic Field in Surface Mounted Permanent-Magnet Tubular Linear Machines, IEEE Transactions on Magnetics, vol.46, issue.11, pp.3870-3884, 2010.
DOI : 10.1109/TMAG.2010.2053850

B. L. Gysen, K. J. Meessen, J. J. Paulides, and E. A. Lomonova, General Formulation of the Electromagnetic Field Distribution in Machines and Devices Using Fourier Analysis, IEEE Transactions on Magnetics, vol.46, issue.1, pp.39-52, 2010.
DOI : 10.1109/TMAG.2009.2027598

O. Delabarrière, Modèle analytique électromagnétique bi et tri dimensionnels en vue de l'optimisation des actionneurs disques. Etude théorique et expérimentale des pertes magnétiques dans les matériaux granulaires, 2010.

J. Wang, D. Howe, and G. Jewell, Fringing in tubular permanent-magnet machines: part I. magnetic field distribution, flux linkage, and thrust force, IEEE Transactions on Magnetics, vol.39, issue.6, pp.3507-3516, 2003.
DOI : 10.1109/TMAG.2003.819463

A. A. Abdel-razek, J. L. Coulomb, M. Feliachi, and J. C. Sabonadière, The calculation of electromagnetic torque in saturated electric machines within combined numerical and analytical solutions of the field equations, IEEE Transactions on Magnetics, vol.17, issue.6, pp.3250-3252, 1981.
DOI : 10.1109/TMAG.1981.1061743

Z. J. Liu, C. Bi, H. C. Tan, and T. S. Low, A combined numerical and analytical approach for magnetic field analysis of permanent magnet machines, IEEE Transactions on Magnetics, vol.31, issue.3, pp.1372-1375, 1995.
DOI : 10.1109/20.376282

Y. Zhang, K. T. Chau, J. Z. Jiang, D. Zhang, and C. Liu, A Finite Element - Analytical Method for Electromagnetic Field Analysis of Electric Machines with Free Rotation, INTERMAG 2006, IEEE International Magnetics Conference, pp.3392-3394, 2006.
DOI : 10.1109/INTMAG.2006.376219

H. Gholizad, M. Mirsalim, and M. Mirzayee, Dynamic analysis of highly saturated switched reluctance motors using coupled magnetic equivalent circuit and the analytical solution, 6th International Conference on Computational Electromagnetics, 2006.

M. Mirzaei, M. Mirsalim, W. Cheng, and H. Gholizad, Analysis of solid rotor induction machines using coupled analytical method and reluctance networks, International Journal of Applied Electromagnetics and Mechanics, vol.25, pp.193-197, 2007.

H. Ghoizad, M. Mirsalim, M. Mirzayee, and W. Cheng, Coupled magnetic equivalent circuits and the analytical solution in the air-gap of squirrel cage induction machines, International Journal of Applied Electromagnetics and Mechanics, vol.25, pp.749-754, 2007.

A. Bellara, H. Bali, R. Belfkira, Y. Amara, and G. Barakat, Analytical Prediction of Open-Circuit Eddy-Current Loss in Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2261-2268, 2011.
DOI : 10.1109/TMAG.2011.2138710

V. Ostovic, Dynamics of Saturated Electric Machines, 1989.
DOI : 10.1007/978-1-4613-8933-0

M. Hecquet, Contribution à la modélisation des systèmes électrotechniques par la méthode des schémas équivalents magnétiques. Application à l'alternateur automobile

L. Albert, Modélisation et optimisation des alternateurs à griffes, Thèse de Doctorat de l'Institut National Polytechnique de Grenoble (INPG), 2004.

M. Rakotovoa, Un modèle opérationnel complet pour l'alternateur à griffes dans le domaine automobile, Thèse de doctorat de l'École Normale Supérieure de Cachan (ENS Cachan), 1996.

Z. Q. Zhu, Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model, IEEE Transactions on Magnetics, vol.41, issue.11, pp.4277-4287, 2005.
DOI : 10.1109/TMAG.2005.854441

D. A. Philips, Coupling finite elements and magnetic networks in magnetostatics, International Journal for Numerical Methods in Engineering, vol.11, issue.10, 1991.
DOI : 10.1002/nme.1620351005

P. Dular, J. Gyselinck, T. Henneronf, and . Piriou, Dual finite element formulations for lumped reluctances coupling, IEEE Transactions on Magnetics, vol.41, issue.5, pp.1396-1943, 2005.
DOI : 10.1109/TMAG.2005.844348

D. H. Im and J. P. Hong, Magnetic field analysis of permanent magnet motor using 3 dimensional equivalent magnetic circuit network method, KIEE, vol.43, issue.9, pp.1432-1439, 1994.

J. Hur, S. B. Yoon, D. Y. Hwang, and D. S. Hyun, Analysis of PMLSM using three dimensional equivalent magnetic circuit network method, IEEE Trans. Magn, vol.33, issue.5, pp.4143-4145, 1997.

C. B. Rasmussen and E. Ritchie, A magnetic equivalent circuit approach for predicting PM motor performance, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting, pp.10-17, 1997.
DOI : 10.1109/IAS.1997.643001

A. Demenko, L. Nowak, and W. Szelag, Reluctance network formed by means of edge element method, IEEE Transactions on Magnetics, vol.34, issue.5, pp.2485-2488, 1998.
DOI : 10.1109/20.717572

J. Hur, I. S. Jung, and D. S. Hyun, Lateral characteristic analysis of PMLSM considering overhang effect by 3 dimensional equivalent magnetic circuit network method, IEEE Trans. Magn, vol.34, issue.5, pp.3528-3531, 1998.

J. Hur, I. S. Jung, and D. S. Hyun, 3-D analysis of permanent magnet synchronous motor with magnet arrangement using equivalent magnetic circuit network method, IEEE Trans. Magn, vol.35, issue.5, pp.3736-3738, 1999.

J. Hur, H. A. Toliyat, and J. Hong, Dynamic analysis of linear induction motor using 3-D equivalent magnetic circuit network method, Elect. Power Comp. Syst, vol.29, issue.6, pp.531-541, 2001.

Y. H. Kim, C. S. Jin, S. Kim, Y. D. Chun, and J. Lee, Analysis of hybrid stepping motor using 3D equivalent magnetic circuit network method based on trapezoidal element, Journal of Applied Physics, vol.91, issue.10, pp.8311-8313, 2002.
DOI : 10.1063/1.1456046

Y. D. Chun, Comparison between three-dimensional (3D) equivalent magnetic circuit network method and 3D finite element method for magnetic-field computation, Journal of Applied Physics, vol.97, issue.10, pp.0-105, 2005.
DOI : 10.1063/1.1853195

M. Amrhein and P. T. Krein, Force Calculation in 3-D Magnetic Equivalent Circuit Networks With a Maxwell Stress Tensor, IEEE Transactions on Energy Conversion, vol.24, issue.3, pp.587-593, 2009.
DOI : 10.1109/TEC.2009.2016142

M. Amrhein and P. T. Krein, Induction Machine Modeling Approach Based on 3-D Magnetic Equivalent Circuit Framework, IEEE Transactions on Energy Conversion, vol.25, issue.2, pp.339-347, 2010.
DOI : 10.1109/TEC.2010.2046998

M. L. Bash, J. M. Williams, and S. D. Pekarek, Incorporating Motion in Mesh-Based Magnetic Equivalent Circuits, IEEE Transactions on Energy Conversion, vol.25, issue.2, pp.329-338, 2010.
DOI : 10.1109/TEC.2009.2035513

T. K. Hoang, D. H. Kang, and J. Y. Lee, Comparisons Between Various Designs of Transverse Flux Linear Motor in Terms of Thrust Force and Normal Force, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3795-3801, 2010.
DOI : 10.1109/TMAG.2010.2050894

P. Thai and . Do, Simulation dynamique des actionneurs et capteurs électromagnétiques par réseaux de réluctances : modèles, méthodes et outils, Thèse de Doctorat de l'Institut National Polytechnique de Grenoble (INPG), 2010.

M. Hecquet, Contribution à l'instrumentation de la démarche de conception des machines électriques, Université des sciences et technologies de Lille, 2006.

P. L. Alger, Induction machines: Their behavior and uses, 1970.

Z. Q. Zhu, Switched flux permanent magnet machines &#x2014; Innovation continues, 2011 International Conference on Electrical Machines and Systems, 2011.
DOI : 10.1109/ICEMS.2011.6073317

E. Hoang, M. Lecrivain, S. Hlioui, and M. Gabsi, Hybrid excitation permanent magnet synchronous machines optimally designed for hybrid and full electric vehicles, Int Conf on Power Electronics (ICPE2011) ?ECCE-Asia, pp.1-2, 2011.

Z. Zhang, Y. Tao, and Y. Yan, Investigation of a New Topology of Hybrid Excitation Doubly Salient Brushless DC Generator, IEEE Transactions on Industrial Electronics, vol.59, issue.6
DOI : 10.1109/TIE.2011.2159957

B. Nedjar, S. Hlioui, L. Vido, Y. Amara, and M. Gabsi, Permanent magnet synchronous machine design for hybrid traction applications: Impact of magnetic laminations materials, 2010 IEEE International Symposium on Industrial Electronics, 2010.
DOI : 10.1109/ISIE.2010.5637839

C. J. Carpenter, Magnetic equivalent circuits, Proc. of the Institution of Electrical Engineers, p.1503, 1968.
DOI : 10.1049/piee.1968.0265

E. C. Cherry, The duality between the inter-linked electric and magnetic circuits, Proc. Phys. Soc, pp.101-111, 1949.

E. R. Lwithwaite, Magnetic equivalent circuits for electrical machines, Proc. of the Institution of Electrical Engineers, pp.1805-1808, 1967.
DOI : 10.1049/piee.1967.0344

P. Hammond, C. J. Carpenter, A. Nimalasuriya, J. A. King, P. G. Kendall et al., Discussion on Magnetic equivalent circuits for electrical machines, Proc. of the Institution of Electrical Engineers, pp.1653-1654, 1968.

C. David and . Hamill, Lumped equivalent circuits of magnetic components: the gyrator ? capacitor approach, IEEE Transaction on Power Electronics, vol.8, issue.2, pp.97-103, 1993.

M. Jufer, Circuits Magnétiques, pp.1-18, 1996.

B. Nedjar, S. Hlioui, L. Vido, Y. Amara, and M. Gabsi, Magnetic Equivalent Circuit applied to a unipolar PMSM, The XIX International Conference on Electrical Machines, ICEM 2010, 2010.
DOI : 10.1109/ICELMACH.2010.5607954

. Acta-polytechnica and . Scandinavica, Electrical Engineering Series Dec, 2002.

P. Dmitry, Contribution à la modélisation et à la conception optimale des turbo-alternateurs de faible puissance, Ecole centrale de Lille Thèse de doctorat, 2007.

E. Ilhan, J. Paulides, L. Encica, and E. Lomonova, Tooth contour method implementation for the flux-switching PM machines, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-6, 2010.
DOI : 10.1109/ICELMACH.2010.5608024

A. Balakrishnan, W. T. Joines, and T. G. Wilson, Aire-gap reluctance and inductance calculations for magnetic circuits uding a Schwartz-Christoffel transformation, IEEE Transaction, vol.12, issue.4, pp.654-663, 1997.

E. A. Lomonova, A. J. Vandenput, and D. C. Krop, Application of Schwarz- Christoffel Mapping to Permanent-Magnet Linear Motor Analysis, IEEE Transaction on Magnetics, vol.44, issue.3, pp.352-359, 2008.

V. Ostovic, Dynamics of Saturated Electric Machines, 1989.
DOI : 10.1007/978-1-4613-8933-0

H. W. Derbas, J. M. Williams, A. C. Koenig, and S. D. Pekarek, A Comparison of Nodal- and Mesh-Based Magnetic Equivalent Circuit Models, IEEE Transactions on Energy Conversion, vol.24, issue.2, pp.388-396, 2009.
DOI : 10.1109/TEC.2008.2002037

B. Olivier, Contribution à l'étude des formulations de calcul de la force magnétique en magnétostatique, approche numérique et validation expérimentale, L2EP, 2003.

D. M. Ionel, T. J. Miller, S. J. Dellinger, M. I. Mcgilp, and . Popescu, Improved finite element computations of torque in brushless permanent magnet motors, Proc.-Electr. Power Appl, pp.271-276, 2005.

J. L. Coulomb and G. Meunier, Finite element implementation of virtual work principle for magnetic or electric force and torque computation, IEEE Transactions on Magnetics, vol.20, issue.5, p.1894, 1984.
DOI : 10.1109/TMAG.1984.1063232

D. A. Staton, W. L. Soong, and T. J. Miller, Unified theory of torque production in switched reluctance and synchronous reluctance motors, IEEE Transactions on Industry Applications, vol.31, issue.2, pp.329-337, 1995.
DOI : 10.1109/28.370281

D. Staton, R. Deodhar, W. Soong, and T. Miller, Torque prediction using the flux-MMF diagram in AC, DC, and reluctance motors, IEEE Transactions on Industry Applications, vol.32, issue.1, pp.180-188, 1996.
DOI : 10.1109/28.485830

C. Cossar, M. Popescu, and T. J. Miller, A General Magnetic-Energy-Based Torque Estimator: Validation via a Permanent-Magnet Motor Drive, IEEE Transactions on Industry Applications, vol.44, issue.4, 2008.
DOI : 10.1109/TIA.2008.926231

M. Popescu, Prediction of the electromagnetic torque in synchronous machines through Maxwell stress harmonic filter (HFT) method, Electrical Engineering, vol.27, issue.2, pp.117-125, 2006.
DOI : 10.1007/s00202-005-0323-1

M. Amrhein, Induction machine performance improvements ? Designoriented approaches, Univ. Illinois at Urbana-Champaign, 2007.

A. R. Tariq, E. G. Nino-baron, and . Strangas, Iron and Magnet Losses and Torque Calculation of Interior Permanent Magnet Synchronous Machines Using Magnetic Equivalent Circuit, IEEE Transactions on Magnetics, vol.46, issue.12, pp.4073-4080, 2010.
DOI : 10.1109/TMAG.2010.2074207

M. Amrhein and P. T. Krein, Magnetic Equivalent Circuit Simulations of Electrical Machines for Design Purposes, 2007 IEEE Electric Ship Technologies Symposium, pp.254-260, 2007.
DOI : 10.1109/ESTS.2007.372095

B. Nedjar, S. Hlioui, L. Vido, Y. Amara, and M. Gabsi, Hybrid Excitation Synchronous Machine modeling using magnetic equivalent circuits, 2011 International Conference on Electrical Machines and Systems, 2011.
DOI : 10.1109/ICEMS.2011.6073918

J. M. Kokernak and D. Torrey, Magnetic circuit model for the mutually coupled switched-reluctance machine, IEEE Transactions on Magnetics, vol.36, issue.2, pp.500-507, 2000.
DOI : 10.1109/20.825824

M. Nakamura, T. Kosaka-nobuyuki, and . Matsui, Instantaneous Torque Analysis of Hybrid Stepping Motor, IEEE Transaction on Industry Application, vol.32, issue.5, 1996.

T. J. Miller, Embedded Finite-Element Solver for Computation of Brushless Permanent-Magnet Motors, IEEE Transactions on Industry Applications, vol.44, issue.4, pp.1124-1133, 2008.
DOI : 10.1109/TIA.2008.926199

B. Nedjar, S. Hlioui, L. Vido, Y. Amara, and M. Gabsi, Magnetic equivalent circuit coupled to finite element analysis for flux focusing PM machine modeling, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation
DOI : 10.1109/CEFC.2010.5481309

M. Popescu, D. M. Ionel, T. J. Miller, S. J. Dellinger, and M. I. Mcgilp, Improved finite element computations of torque in brushless permanent magnet motors, Proc.-Electr. Power Appl, pp.271-276, 2005.

T. Kosaka, N. Matsui, and Y. Kano, Simple Nonlinear Magnetic Analysis for Permanent-Magnet Motors, IEEE Transaction on Industry Application, vol.41, issue.5, pp.1205-1214, 2005.

Y. Kano, T. Kosaka, and N. Matsui, Simple Nonlinear Magnetic Analysis for Permanent-Magnet Motors, IEEE Transactions on Industry Applications, vol.41, issue.5, pp.1205-1214, 2005.
DOI : 10.1109/TIA.2005.853376

S. Hlioui, L. Vido, Y. Amara, M. Gabsi, and A. Miraoui, Magnetic equivalent circuit model of a hybrid excitation synchronous machine, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.27, issue.5, pp.1000-1015, 2005.
DOI : 10.1108/03321640810890735

B. Nedjar, A New Parallel Double Excitation Synchronous Machine, IEEE Transactions on Magnetics, 2011.
DOI : 10.1109/TMAG.2011.2134864

Z. Q. Zhu and D. Howe, Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles, Proceedings of the IEEE, pp.746-765, 2007.
DOI : 10.1109/JPROC.2006.892482

L. Vido, Y. Amara, M. Gabsi, M. Lecrivain, and F. Chabot, Compared performances of homopolar and bipolar hybrid excitation synchronous machines, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005., pp.1555-1560, 2005.
DOI : 10.1109/IAS.2005.1518652

L. Vido, M. Gabsi, M. Lécrivain, Y. Amara, and F. Chabot, Homopolar and bipolar hybrid excitation synchronous machines, IEEE International Conference on Electric Machines and Drives, 2005., pp.1212-1218, 2005.
DOI : 10.1109/IEMDC.2005.195876

J. Kennedy and R. Eberhart, Particle swarm optimization, Proceedings of ICNN'95, International Conference on Neural Networks, pp.1942-1948, 1995.
DOI : 10.1109/ICNN.1995.488968

T. Peram, K. Veeramachaneni, and C. K. Mohan, Fitness-distance-ratio based particle swarm optimization, Proceedings of the 2003 IEEE Swarm Intelligence Symposium. SIS'03 (Cat. No.03EX706), pp.174-181, 2003.
DOI : 10.1109/SIS.2003.1202264

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.546.4253