Influence des transformations martensitiques sur les propriétés mécaniques des alliages de système F e ? Ni ? Cr ? C, Thèse de doctorat, 1972. ,
A first report on diagrams for grain growth in welds, Acta Metallurgica, vol.30, issue.11, pp.1969-1978, 1982. ,
DOI : 10.1016/0001-6160(82)90100-6
Revealing austenitic grains in microalloyed steels by picric acid etching, Pract. Metallogr, vol.31, pp.252-261, 1994. ,
Métallurgie Tome I : métallurgie physique, Collection Scientifique. ENSAM, 1982. ,
Carbon and Alloys Steels in Metals Handbook, 1985. ,
ContributionàContributionà la validation expérimentale de modèles décrivant la Z.A.T. lors d'une opération de soudage, Thèse de doctorat, 1998. ,
Dilatometric measurement of carbon enrichment in austenite during bainite transformation, Journal of Materials Science, vol.8, issue.501, pp.414965-4969, 2006. ,
DOI : 10.1007/s10853-006-0127-3
Sur le comportement thermomécanique des matériaux et des structures métalliques, Thèse de doctorat, 1980. ,
Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading, International Journal of Plasticity, vol.18, issue.12, pp.1707-1727, 2002. ,
DOI : 10.1016/S0749-6419(01)00067-5
URL : https://hal.archives-ouvertes.fr/hal-01006856
Comportement dilatométrique et mécanique de l'austénite métastable d'un acier A533, 1981. ,
Introduction aux traitements thermiques des métaux et alliages, pp.1-1105, 2003. ,
A new view on transformation induced plasticity (TRIP), International Journal of Plasticity, vol.16, issue.7-8, pp.723-748, 2000. ,
DOI : 10.1016/S0749-6419(99)00078-9
Metallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels, Materials Characterization, vol.46, issue.5, pp.389-398, 2001. ,
DOI : 10.1016/S1044-5803(01)00142-5
Etude du comportement mécanique associéassociéà la transformation martensitique d'alliages de type Fe-Ni-C sollicités en fluage ou en traction, 7th International conference on strengh of metal and alloys, pp.12-16569, 1985. ,
Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels, Materials Characterization, vol.40, issue.2, pp.111-118, 1998. ,
DOI : 10.1016/S1044-5803(97)00154-X
The Deformation of Metals Under Small Stresses During Phase Transformations, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.283, issue.1394, p.283, 1965. ,
DOI : 10.1098/rspa.1965.0029
Variation of stacking fault energy with austenite grain size and its effect on the M S temperature of ? ? ? martensitic transformation in Fe-Mn alloy, Materials Science and Engineering, issue.257, pp.353-356, 1998. ,
Influence of the austenite grain size on the mechanical behaviour of steels undergoing phase changes : Analyses through satoh tests, Proceedings of the 2 nd International Conference on Distortion Engineering, pp.17-19355, 2008. ,
A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size, Acta Metallurgica, vol.32, issue.1, pp.137-146, 1984. ,
DOI : 10.1016/0001-6160(84)90211-6
Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases, International Journal of Plasticity, vol.5, issue.6, pp.551-572, 1989. ,
DOI : 10.1016/0749-6419(89)90001-6
Transformation Kinetics, Microplasticity and Ageing of Martensite in F e ? 31 ? Ni, Thèse de doctorat, 1966. ,
Factors affecting prior austenite grain size in low alloy steel, Journal of Materials Science, vol.14, issue.4, pp.1309-1321, 2007. ,
DOI : 10.1007/s10853-006-1191-4
Transformations dans les aciers, pp.11-11, 1998. ,
Mechanical properties of a Cr-Ni-Mo-Al-Ti ma- BIBLIOGRAPHIE raging steel in the process of martensitic transformation, Materials Science and Engineering, issue.308, pp.25-37, 2001. ,
Conséquences mécaniques des transformations structurales dans les alliages ferreux, Thèse de doctorat, 2000. ,
Effect of applied tensile stress on phase transformations in steel, Acta Metallurgica, vol.7, issue.7, pp.504-514, 1959. ,
DOI : 10.1016/0001-6160(59)90031-8
Characterization of TRIP-assisted multiphase steel surface topography by atomic force microscopy, Materials Characterization, vol.47, issue.2, pp.93-104, 2001. ,
DOI : 10.1016/S1044-5803(01)00157-7
Prediction of austenite grain growth during austenitization of low alloy steels, Materials and Design, issue.29, pp.1840-1844, 2008. ,
Effet des sollicitaions thermomécaniques sur les transformations de phases dans l'´ etat solide : Aspects métallurgique et mécanique, Journal de Physique IV, pp.4-3199, 1994. ,
Experimental analysis of transformation plasticity, International Journal of Plasticity, vol.17, issue.1, pp.1-20, 2001. ,
DOI : 10.1016/S0749-6419(99)00090-X
A micromechanical modeling of the Greenwood???Johnson mechanism in transformation induced plasticity, International Journal of Plasticity, vol.19, issue.10, pp.1821-1842, 2003. ,
DOI : 10.1016/S0749-6419(03)00020-2
Grain size effects in multiphase steels assisted by transformation-induced plasticity, International Journal of Solids and Structures, vol.43, issue.24, pp.7322-7336, 2006. ,
DOI : 10.1016/j.ijsolstr.2006.06.017
Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel, Le Journal de Physique IV, vol.06, issue.C1, pp.465-474, 1995. ,
DOI : 10.1051/jp4:1996145
URL : https://hal.archives-ouvertes.fr/jpa-00254177
Uncertainties in dilatometric determination of martensite start temperature, Materials Science and Technology, vol.7, issue.5, pp.556-560, 2007. ,
DOI : 10.1007/BF02645565
Austenite grain size and the martensite-start temperature, Scripta Materialia, vol.60, issue.7, pp.493-495, 2009. ,
DOI : 10.1016/j.scriptamat.2008.11.043
A general etchant for revealing prior-austenite grain boundaries in steels, Materials Characterization, vol.30, issue.4, pp.299-305, 1993. ,
DOI : 10.1016/1044-5803(93)90078-A