F. Auerbach, 6,5 kV IGBT-Modules, Proceedings IAS'99, pp.1770-1774, 1999.

J. Arnould and P. Merle, Dispositifs de l'électronique de puissance, Hermès, volumes 1 et 2, 1992.

D. R. White, S. D. Keck, and T. G. Nakanishi, New SiC/Al baseplates for high performance power modules, Proceedings PCIM'96, pp.341-346, 1996.

S. Azzopardi, J. M. Thébaud, E. Woirgard, C. Zardini, and P. Sablé, Al/SiC baseplate hybrid power modules: evaluation of the thermomechanical performances, IWIPP Proceedings. IEEE International Workshop on Integrated Power Packaging (Cat. No.98EX203), pp.74-78, 1998.
DOI : 10.1109/IWIPP.1998.722311

URL : https://hal.archives-ouvertes.fr/hal-00185560

A. Bricard and S. Chaudoume, Caloducs, pp.9545-9546

L. Meysenc, Etude des micro-échangeurs intégrés pour" le refroidissement des semiconducteurs de puissance, Thèse de doctorat de l'INPG, 1998.

C. Gramfort, Détermination de la température d'un semi-conducteur: méthode de la chute de tension directe, p.85, 1985.

E. Farjah, Contribution aux caractérisations électrique et thermique des transistors de puissance à grille isolée, Thèse de doctorat de l'INPG, 1994.

J. M. Dorkel, P. Tounsi, and P. Leturcq, Three-dimensional thermal modeling based on the two-port network theory for hybrid or monolithic integrated power circuits, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.19, issue.4, pp.501-507, 1996.
DOI : 10.1109/95.554931

C. Schaeffer, Pour une conception à haute intégration des systèmes de puissance, Habilitation à diriger des recherches de l'INPG, 1999.

D. B. Tuckerman and R. F. Pease, High-performance heat sinkfor VLSI, IEEE Electron Devices Letters, issue.2, pp.126-129, 1981.

R. J. Phillips, Microchannel heat sinks", in Advances in Thermal Modeling of Electronic Components, ASME, vol.2, issue.3, pp.109-184, 1990.

R. K. Knight, D. J. Hall, J. S. Goodling, and R. C. Jaeger, Heat sink optimization with application to microchannels, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.15, issue.5, pp.832-842, 1992.
DOI : 10.1109/33.180049

A. Weisberg and H. H. Bau, Analysis of microchannels for integrated cooling, International Journal of Heat and Mass Transfer, vol.35, issue.10, pp.2465-2474, 1992.
DOI : 10.1016/0017-9310(92)90089-B

D. Copeland, M. Behnia, and W. Nakayama, Manifold microchannel heat sinks: isothermal analysis, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.20, issue.2, pp.96-102, 1997.
DOI : 10.1109/95.588554

B. X. Wang and X. F. Peng, Experimental investigation on liquid forced-convection heat transfer through microchannels, International Journal of Heat and Mass Transfer, vol.37, pp.73-82, 1994.
DOI : 10.1016/0017-9310(94)90011-6

A. Bejan, Convection heat transfer, pp.75-82, 1984.
DOI : 10.1002/9781118671627

J. Taine and J. P. Petit, Transferts thermiques et mécaniques des fluides anisothermes, 1989.

L. Meysenc, L. Saludjian, A. Bricard, S. Rael, and C. Schaeffer, A high heat flux IGBT micro exchanger setup, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.20, issue.3, pp.334-341, 1997.
DOI : 10.1109/95.623028

C. Perret, J. Boussey, C. Schaeffer, and M. Coyaud, Integration of cooling devices in silicon techl1010gy, Proceedings IAS'99, pp.1780-1786, 1999.

F. Wurtz and J. Bigeon, A methodology and a tool for the computer aided design with constraints ofelectrical devices, IEEE Transaction on Magnetics, vol.32, 1996.

C. Gillot, L. Meysenc, C. Schaeffer, and A. Bricard, Integrated single and two-phase micro heat sinks under IGBT chips, IEEE Transactions on Components and Packaging Technologies, vol.22, issue.3, pp.384-389, 1999.
DOI : 10.1109/6144.796540

C. Gillot, C. Schaeffer, and A. Bricard, Integrated micro heat sink for power multichip module, IEEE Transactions on Industry Applications, vol.36, issue.1, pp.217-221, 2000.
DOI : 10.1109/28.821819

C. Gillot, A. Bricard, and C. Schaeffer, Single- and two-phase heat exchangers for power electronic components, International Journal of Thermal Sciences, vol.39, issue.8, pp.826-832, 2000.
DOI : 10.1016/S1290-0729(00)00278-7

R. Hahn, A. Kamp, and A. Ginolas, High power multichip modules employing the planar embedding technique and microchannel water heat sinks, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.20, issue.4, pp.432-441, 1997.
DOI : 10.1109/95.650932

W. Staiger, H. Baumann, and P. Heinemeyer, Optimization of cooling systems for power electronics by means of FEMICFD-simulations, Proceedings EuPac'98, pp.75-78, 1998.

P. Rodriguez and J. M. Fusaro, Integration of heat exchanger with high current hybrid power module, Proceedings Interpack'97, pp.2173-2178, 1997.

J. Schulz-harder, K. Exel, and A. Meyer, Fluid-cooled DBC substrates, PCIM Europe Power Conversion, n02/98, pp.66-71, 1998.

. Vergnes, . Hugon, and . Sorensen, Caractérisation thermique du refroidisseur moducal", Projet d'option de l, 1998.

K. Haque, R. Xing, and . Lin, An innovative technique for packaging power electronic building blocks using metal posts interconnected parallel plate structures, IEEE Transactions on Advanced Packaging, vol.22, issue.2, pp.136-144, 1999.
DOI : 10.1109/6040.763184

R. Fisher, R. Fillion, J. Burgess, and W. Hennessy, High frequency, low cost, power packaging using thin film power overlay technology, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition, APEC'95, pp.12-17, 1995.
DOI : 10.1109/APEC.1995.468955

G. Coquery, R. Lallemand, D. Wagner, and P. Gibard, Reliability of the 400 A IGBT modules for traction converters contribution on the power thermal fatique influence on life expectancy, Proceedings EPE'95, pp.60-65, 1995.

V. A. Sankaran, C. Chen, C. S. Avant, and X. Xu, Power cycling reliability of IGBT power modules, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting, pp.1222-1227, 1997.
DOI : 10.1109/IAS.1997.630841

W. Wu, G. Gao, and L. Dong, Thermal reliability of power insulated gate bipolar transistor (IGBT) modules, Proceedings IEEE Semi. Therm. Measur. and Manag. Symp, pp.136-141, 1996.

T. Schütze, H. Berg, and M. Hierholzer, Further improvements in the reliability of IGBT modules, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242), pp.1022-1025, 1998.
DOI : 10.1109/IAS.1998.730271

G. Lu, S. Haque, and K. Xing, Development of a stacked-plate technique dor 3-D packaging of power electronics modules, Proceedings IWIPP'98, pp.9-14, 1998.

S. Haque, W. A. Stinnitt, D. J. Nelson, and G. Lu, Thermal management of power electronics modules packaged by a stacked-plate technique, Proceedings International Symposium on Microelectronics, pp.850-855, 1998.
DOI : 10.1016/S0026-2714(99)00055-4

Y. Takahashi, T. Koga, H. Kirihata, and Y. Seki, 2.5 kV-100 A flat-packaged IGBT (micro-stack IGBT), IEEE Transactions on Electron Devices, vol.43, issue.12, pp.2276-2282, 1996.
DOI : 10.1109/16.544421

URL : https://hal.archives-ouvertes.fr/in2p3-00309474

F. Wakeman, G. Lockwood, M. Davies, and K. Billett, Pressure contact IGBT, the ideal switchfor high power applications, Proceedings IAS'99, pp.700-707, 1999.

M. Hiyoshi and K. Nishitani, 3.3 kV and 2.5 kV press pack IGBT switching performance and mechanical reliability, Proccedings PCIM -Europe, pp.205-215, 1997.

C. Gillot, C. Schaeffer, R. Perret, C. Massit, and L. Meysenc, Double-sided Cooling for High Power IGBT Modules using Flip Chip Technology, Proceedings IAS'2000, 2000.

L. A. Viduya, E. W. Gerbsch, M. B. Hayes, R. J. Campbell, and T. G. Nakanishi, The effects of solder voids in the device to substrate interface for electric vehicle and other power applications, Power Electronics in Transportation, pp.99-104
DOI : 10.1109/PET.1996.565916

S. Venin, Origine, évolution et méthodes d'élimination de porosités dans des plots de brasure en microconnectique, 1999.

F. Breit, caractérisation des modules de puissance à refroidissement double face à microcanaux, 2000.

C. V. Godbold, V. A. Sankaran, and J. L. Hudgins, Novel designs in power modules, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting, pp.911-915, 1995.
DOI : 10.1109/IAS.1995.530395

C. V. Godbold, V. A. Sankaran, and J. L. Hudgins, Thermal analysis of high-power modules, IEEE Transactions on Power Electronics, vol.12, issue.1, pp.3-11, 1997.
DOI : 10.1109/63.554164

J. He, V. Mehrotra, and M. C. Shaw, Thermal design and measurements of IGBT power modules: transient and steady state, Proceedings IAS'99, pp.1440-1444, 1999.

C. Perret, J. Boussey, C. Schaeffer, and M. Coyaud, Analytic models, optimisation and realisation of cooling devices in silicon technology, Proceedings 5 th THERMINIC Workshop, pp.65-71, 1999.

M. Coyaud, Evaluation de refroidisseurs à microcanaux pour l'électronique de puissance, DEA de Génie Electrique de l'INPG, 1999.