X. Jin, L. Li, and Y. Zhang, A study on fresnel absorption and reflections in the keyhole in deep penetration laser welding, Journal of Physics D: Applied Physics, vol.35, issue.18
DOI : 10.1088/0022-3727/35/18/312

L. Xiangzhong-jin and . Li, An experimental study on the keyhole shapes in laser deep penetration welding, Optics and Lasers in Engineering, vol.41, pp.779-790, 2004.

J. Jouvard, K. Girard, and O. Perret, Keyhole formation and power deposition in Nd:YAG laser spot welding, Journal of Physics D: Applied Physics, vol.34, issue.18, pp.2894-2901, 2001.
DOI : 10.1088/0022-3727/34/18/324

[. Cho and S. Na, Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole, Journal of Physics D: Applied Physics, vol.39, issue.24, pp.5372-5378, 2006.
DOI : 10.1088/0022-3727/39/24/039

A. Kaplan, A model of deep penetration laser welding based on calculation of the keyhole profile, Journal of Physics D: Applied Physics, vol.27, issue.9, pp.1805-1814, 1994.
DOI : 10.1088/0022-3727/27/9/002

]. A. Kaplan, M. Mizutani1, S. Katayama, and A. Matsunawa, Unbounded keyhole collapse and bubble formation during pulsed laser interaction with liquid zinc, Journal of Physics D: Applied Physics, vol.35, issue.11, pp.35-1218, 2002.
DOI : 10.1088/0022-3727/35/11/319

H. Ki, P. Mohanty, and J. Majumder, Modelling of high-density laser-material interaction using fast level set method, Journal of Physics D: Applied Physics, vol.34, issue.3, pp.364-72, 2001.
DOI : 10.1088/0022-3727/34/3/320

H. Ki, P. Mohanty, and J. Majumder, Multiple reflection and its influence on keyhole evolution, Journal of Laser Applications, vol.14, issue.1, pp.39-45, 2002.
DOI : 10.2351/1.1449885

H. Ki, P. Mohanty, and J. Majumder, Modeling of laser keyhole welding: Part I. mathematical modeling, numerical methodology, role of recoil pressure, multiple reflections, and free surface evolution, Metallurgical and Materials Transactions A, vol.22, issue.1, pp.1817-1847, 2002.
DOI : 10.1007/s11661-002-0190-6

H. Ki, P. Mohanty, and J. Majumder, Modeling of laser keyhole welding: Part II. simulation of keyhole evolution, velocity, temperature profile, and experimental verification, Metallurgical and Materials Transactions A, vol.32, issue.8, pp.1831-1873, 2002.
DOI : 10.1007/s11661-002-0191-5

P. G. Klemens, Heat balance and flow conditions for electron beam and laser welding, Journal of Applied Physics, vol.47, issue.5, pp.2165-2174, 1976.
DOI : 10.1063/1.322866

J. Kroos, U. Kratzke, and G. Simon, Towards a self-consistent model of the keyhole in penetration laser beam welding, Journal of Physics D: Applied Physics, vol.26, issue.3, pp.474-480, 1993.
DOI : 10.1088/0022-3727/26/3/021

]. S. Matteï, P. Masclet, and P. Hervé, Study of complex refractive indices of gold and copper using emissivity measurements, Infrared Physics, vol.29, issue.6, pp.991-994, 1984.
DOI : 10.1016/0020-0891(89)90028-6

. Matsunawa, J. Seto, M. Kim, S. Mizutani, and . Katayama, Observation of Keyhole and Molten Pool Behaviour in High Power Laser, 2001.

]. J. Mazumber and &. W. Steen, Heat transfer model for cw laser material processing, Journal of Applied Physics, vol.51, issue.2, p.941, 1980.
DOI : 10.1063/1.327672

]. N. Pierron, S. Matteï, P. Sallamand-]-g, and . Paradis, Transferts thermiques lors d'assemblages par laser de feuilles minces :approche numérique et expérimental, Monographies techniques du DFTN : Soudage par laser, CEA Valduc, 2005.

G. Pascal, D. Nore, K. Girard, O. Perret, and N. Ph, Analysis of induced effects in matter during pulsed Nd:YAG laser welding by flash radiography Quantitative Non-Destructive Evaluation, AIP Conf. Proc. 509, pp.1349-56, 1999.

O. Perret, M. Bizouard, N. Ph, G. Pascal, D. Nore et al., Characterization of the keyhole formed during pulsed Nd???YAG laser interaction with a Ti???6Al???4V metallic target, Journal of Applied Physics, vol.90, issue.1, pp.27-30, 2001.
DOI : 10.1063/1.1368178

]. D. Rosenthal, the theory of moving Source of heat and its application to metal treatments, Trans.ASME, vol.48, pp.849-866, 1946.

V. Semak and A. Matsunawa, The role of recoil pressure in energy balance during laser materials processing, Journal of Physics D: Applied Physics, vol.30, issue.18, pp.2541-2552, 1997.
DOI : 10.1088/0022-3727/30/18/008

. Schneider, . Fabbro, and . Berthe, Perçage profond par laser : analyse des processus physiques', thèse de l, 2006.

]. I. Tomashchuk, P. Sallamand, and J. M. Jouvard, Assemblage hétérogène cuivre-inox et TA6V-inox par faisceaux de haute énergie : compréhension et modélisation des phénomènes physico-chimiques, thèse, 2010.

]. C. Touvrey-xhaard, M. Medale, and R. Fabbro, Etude thermohydraulique de soudage impulsionnel de l'alliage TA6V, Thèse, 2006.

[. W. Chang-]-w, S. J. Chang, and . Na, A study on heat source equations for the prediction of weld shape and thermal deformation in laser microwelding, Metallurgical and Materials Transactions B, vol.18, issue.5, 2002.
DOI : 10.1007/s11663-002-0029-y

]. Y. Zhang, A novel ???sandwich??? method for observation of the keyhole in deep penetration laser welding, Optics and Lasers in Engineering, vol.46, issue.2, pp.133-139, 2008.
DOI : 10.1016/j.optlaseng.2007.08.010