Traitement de surface par texturation laser : une alternative "propre" de préparation de surface pour la projection thermique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2011

Laser process for surface texturing treatment en alternative "clean" surface preparation for thermal spraying process

Traitement de surface par texturation laser : une alternative "propre" de préparation de surface pour la projection thermique

Résumé

The surface preparation before thermal spraying is a very important step for coating adhesion.Conventionally, degreasing and sandblasting are the two processes used for this surfacepretreatment, but the significant environmental impact of these conventional methods, theircosts and the possible modification of the properties of ductile materials lead to thedevelopment of new methods.The laser texturing process appears as an attractive and "clean" alternative to the conventionaltechnique. The method allows the surface preparation by ablation of material to create microcavities with a conical shape at the surface of the substrate. This texturing process willincrease the surface of contact between the substrate surface and the coating and lead to abetter mechanical anchoring of the coating. This process also allows the pretreatment of thesurface in a very short time without generating any waste.The approach followed in this study aims at characterizing the effects of each operatingparameter of the laser through a optimization protocol by experimental design strategy. Theapproach consists in assessing the level of modifications of surface substrate morphology aswell as the thermal effect induced by laser irradiation before evaluating the performance oftexturing by carrying out tenacity and interface adhesion tests. This approach aims atdetermining the operating conditions that provide the best adhesion of the coating and allowto reach adherence levels higher than those proposed by the conventional methods.Finally, analysis of the environmental impacts of the laser texturing pretraitment process isused to define its effect on the environment, health and ecosystem in comparison with theconventional methods.
La préparation de surface avant projection thermique est une étape très importante pourl’adhérence des revêtements. Conventionnellement, le dégraissage et le sablage sont les deuxprocédés utilisés pour ce type de préparation, mais l'impact environnemental important de cesprocédés conventionnels, ainsi que les couts désormais associés, et la modification despropriétés des matériaux ductiles ont mené au développement de nouvelles méthodes.Le procédé de texturation par laser est alors apparu comme une alternative intéressante et"propre" à la technique conventionnelle. Ce procédé permet la préparation de la surface parablation de la matière jusqu’à création de microcavités de forme conique à la surface dusubstrat. Cette texturation permet alors d’augmenter la surface de contact entre le matériau etle revêtement et de mieux ancrer mécaniquement le dépôt. Ce procédé permet également letraitement de la surface dans un temps très court, et surtout il n’engendre aucun déchet dansl’environnement.L’approche suivie dans cette étude, a permis de caractériser les effets de chaque paramètreopératoire du laser à travers un protocole d’optimisation par plan d’expériences. La démarcheconsiste, tout d’abord à apprécier le niveau de modifications morphologiques de la surface dusubstrat, ainsi que l’effet thermique induit par l’irradiation laser avant d'évaluer lesperformances des texturations réalisées en termes adhérence et de ténacité d'interface. Cetteapproche a pour objectif de définir les conditions opératoires qui proposent la meilleureadhérence du revêtement et a permis d'atteindre des niveaux supérieurs à ceux proposés parle procédé conventionnel.Enfin, l’analyse de l’impact environnemental du procédé de traitement de surface partexturation laser permet de définir le niveau de respect de l’environnement, de la santé ainsique l’écosystème du procédé en comparaison au procédé conventionnel.
Fichier principal
Vignette du fichier
ThA_se_-_LAMRAOUI_-_Amina_UTBM.pdf (12.27 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00703229 , version 1 (01-06-2012)

Identifiants

  • HAL Id : tel-00703229 , version 1

Citer

Amina Lamraoui. Traitement de surface par texturation laser : une alternative "propre" de préparation de surface pour la projection thermique. Autre. Université de Technologie de Belfort-Montbeliard, 2011. Français. ⟨NNT : 2011BELF0170⟩. ⟨tel-00703229⟩
1468 Consultations
5639 Téléchargements

Partager

Gmail Facebook X LinkedIn More