Comportement mécanique et rupture des aciers au C-Mn en présence de vieillissement dynamique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2011

Mechanical behavior and fracture of the C-Mn steels in the presence of dynamic strain aging

Comportement mécanique et rupture des aciers au C-Mn en présence de vieillissement dynamique

Résumé

The dynamic strain aging is manifested especially by the Portevin-Le Chatelier (PLC) phenomenon. It appears in steels around 200°C at quasi static solicitation conditions. In C-Mn steels, it leads to a drop of ductility and of toughness which should be taken into account in the design of safety structures. The thesis aims to model the mechanical behavior of the C-Mn steels taking into account the dynamic strain aging and to predict the ductile fracture of these steels in the presence of the phenomenon. The mechanical behavior of the material studied, a C-Mn steel, was characterized using tensile tests. The KEMC model, which was implemented in the Finite Element program Zébulon, was identified using these tests: the Portevin-Le Chatelier (PLC) effect was correctly simulated on the tensile specimens, the notched specimens and the CT specimens. We showed the importance of boundary conditions in the occurrence of the PLC effect. As far as the ductile fracture is concerned, the application of the Rice and Tracey’s criterion (identified at 20°C) on the notched specimens AE4 showed that the consideration of the dynamic strain aging in the behavior was insufficient to give a good prediction of the fracture. Micromechanical studies of the growth of voids showed that PLC localizations can facilitate the growth and the coalescence of voids. The nominal strain hardening, which depends on the strain hardening and the hardening due to the dynamic strain aging, does not modify the critic growth ratio of voids but the growth rate of voids. We identified a damage model using micromechanical simulations. The parameters of this damage model depend on temperature. The new model gave a better prediction than the Rice and Tracey model on the notched specimens AE4 and it also allowed predicting the drop of toughness on the CT specimens. To improve the prediction of fracture, le damage law must depend on strain rate.
Le vieillissement dynamique se manifeste en particulier par le phénomène de Portevin-Le Chatelier (PLC). Il se produit dans les aciers aux environs de 200°C pour des sollicitations quasi-statiques. Dans les aciers au C-Mn, il conduit à une chute de ductilité et de ténacité qui doit être prise en compte dans le dimensionnement des structures de sûreté. L’objectif de la thèse consiste à modéliser le comportement mécanique des aciers au C-Mn en tenant compte du vieillissement dynamique et à prédire leur rupture ductile en présence de ce phénomène. Le comportement mécanique du matériau étudié, un acier au C-Mn, a été caractérisé par des essais de traction simple. Le modèle KEMC implémenté dans le code de calculs par éléments finis Zébulon, a été identifié sur ces essais : l’effet de Portevin Le-Chatelier (PLC) a été correctement simulé sur les éprouvettes lisses, entaillées et CT. Nous avons montré l’importance des conditions aux limites dans la manifestation du PLC. Pour la rupture ductile, l’application du critère de Rice et Tracey (identifié à 20°C) sur les éprouvettes entaillées AE4 montre que la prise en compte du vieillissement dynamique dans le comportement ne suffit pas pour avoir une bonne prédiction de la rupture. Des études micromécaniques de croissance de cavité indiquent que les localisations de PLC peuvent favoriser la croissance et la coalescence de cavité. L’écrouissage apparent, qui dépend du durcissement par la déformation mais aussi du durcissement provenant du vieillissement dynamique, modifie la vitesse de croissance de cavité, mais pas le taux critique de croissance de cavité. On identifie une loi d’endommagement dont les paramètres dépendent de la température à partir des calculs micromécaniques. Le nouveau modèle donne une meilleure prédiction que le modèle de Rice et Tracey sur les éprouvettes entaillées AE4 et a permis de prédire un creux de ténacité sur les éprouvettes CT. Pour améliorer les prédictions, la loi d’endommagement doit dépendre de la vitesse de déformation.
Fichier principal
Vignette du fichier
MA_moire_thA_se_wang.pdf (28.95 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00704515 , version 1 (05-06-2012)

Identifiants

  • HAL Id : tel-00704515 , version 1

Citer

Huaidong Wang. Comportement mécanique et rupture des aciers au C-Mn en présence de vieillissement dynamique. Autre. Ecole Centrale Paris, 2011. Français. ⟨NNT : 2011ECAP0022⟩. ⟨tel-00704515⟩
468 Consultations
5901 Téléchargements

Partager

Gmail Facebook X LinkedIn More