Simulation numérique par la méthode SPH de fuites de fluide consécutives à la déchirure d'un réservoir sous impact - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2011

Numerical simulation with the SPH method of fluid leackage resulting from the rupture of a tank under impact

Simulation numérique par la méthode SPH de fuites de fluide consécutives à la déchirure d'un réservoir sous impact

Résumé

The recent development of terrorist threats increases the research effort of the french Atomic Energy Commission (CEA) and the French Electricity company (EDF) for the protection of citizens and facilities. Many scenarios should be considered as, for example, the fall of an airliner on a civil engineering structure. The dispersion of fuel in the structure, the formation of a fireball and associated thermal effects are essential elements of the problem. The use of numerical models is essential because experiences would be difficult to organize, costly and dangerous. The typical problem that we want to model is the impact of a tank filled with fluid, its rupture and the dispersion of its contents. It is a complex problem which involves a thin structure with a highly non-linear behavior up to rupture, a fluid with a free surface that can vary drastically and non permanent fluid-structure interactions. The use of traditional numerical methods to solve this kind of problems is difficult, mainly because they rely on a mesh. This complicates the management of large deformations, the modeling of moving interfaces and the introduction of discontinuities such as cracks. To overcome these problems, the meshfree method SPH (Smoothed Particle Hydrodynamics) was used to model both the fluid and the structure. This work, which is a continuation of previous research, has extended a model of SPH shell to the modeling of ruptures. An algorithm for managing fluid-structure interactions has also been adapted to the particular topology of shells. To reduce the important computational costs associated with this model, a coupling with the finite element method was also developed. It allows the use of SPH in areas of interest where the rupture is expected. Finally, tests performed by the french Aerospace Lab (ONERA) are studied to validate the method. This work helped to provide fast dynamic software Europlexus an original and effective tool for the simulation of the impact of thin structures interacting with fluid. A demonstrative calculation finally shows the relevance of the approach and its use within an industrial framework.
Le récent développement des menaces terroristes renforce l'effort de recherche du CEA et d'EDF pour la protection des citoyens et des installations. De nombreux scénarios doivent être envisagés comme, par exemple, la chute d'un avion de ligne sur une structure de génie civil. La dispersion du carburant dans la structure, son embrasement sous forme de boule de feu et les effets thermiques associés sont des éléments essentiels du problème. L'utilisation de modèles numériques est indispensable car des expériences seraient difficiles à mettre en œuvre, coûteuses et dangereuses. Le problème type que l'on cherche à modéliser est donc l'impact d'un réservoir rempli de fluide, sa déchirure et la dispersion de son contenu. C'est un problème complexe qui fait intervenir une structure mince avec un comportement fortement non-linéaire allant jusqu'à rupture, un fluide dont la surface libre peut varier drastiquement et des interactions fluide-structure non permanentes. L'utilisation des méthodes numériques traditionnelles pour résoudre ce problème semble difficile, essentiellement parce qu'elles reposent sur un maillage. Cela complique la gestion des grandes déformations, la modélisation des interfaces variables et l'introduction de discontinuités telles que les fissures. Afin de s'affranchir de ces problèmes, la méthode sans maillage SPH (\og Smoothed Particle Hydrodynamics \fg) a été utilisée pour modéliser le fluide et la structure. Ce travail, inscrit dans la continuité de recherches précédentes, a permis d'étendre un modèle de coque SPH à la modélisation des ruptures. Un algorithme de gestion des interactions fluide-structure a également été adapté à la topologie particulière des coques. Afin de réduire les coûts de calcul importants liés à ce modèle, un couplage avec la méthode des éléments finis a également été élaboré. Il permet de n'utiliser les SPH que dans les zones d'intérêt où la rupture est attendue. Finalement, des essais réalisés par l'ONERA sont étudiés pour valider la méthode. Ces travaux ont permis de doter le logiciel de dynamique rapide Europlexus d'un outil original et efficace pour la simulation des impacts de structures minces en interaction avec un fluide. Un calcul démonstratif montre enfin la pertinence de l'approche et sa mise en œuvre dans un cadre industriel.
Fichier principal
Vignette du fichier
these.pdf (21 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-00711040 , version 1 (22-06-2012)

Identifiants

  • HAL Id : tel-00711040 , version 1

Citer

Fabien Caleyron. Simulation numérique par la méthode SPH de fuites de fluide consécutives à la déchirure d'un réservoir sous impact. Autre. INSA de Lyon, 2011. Français. ⟨NNT : 2011ISAL0103⟩. ⟨tel-00711040⟩
861 Consultations
1699 Téléchargements

Partager

Gmail Facebook X LinkedIn More