Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2011

The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites

Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique

Résumé

The "Resin Transfer Molding" (RTM) process is very largely used for the industrial production of composites materials with thermoset matrix. Indeed, it’s used by many fields such as the automotive and aeronautics. In this work we adapted this process to the manufacture of composite materials with thermoplastic matrix in order to answer the ecological and economic criteria imposed on industries. For that several steps were necessary. The first was the selection of a robust chemistry, adapted to the requirements of the process (low initial viscosity of the reactive system, polymerization time, etc). The selected chemistry, was the ring opening polymerization of ε - caprolactam to obtain polyamide-6 (PA-6). Rhéo-kinetics studies, as well as the physicochemical characterizations of a Pa-6 obtained at the laboratory were carried out. Following this step, tests in conditions of process were carried out with the use of dedicated pilot equipment. These tests were the source of modifications and optimizations of certain parameters of the process. The third step, consisted with the production of composite parts with a reinforcement of the type: unidirectional glass fabric. This production was followed mechanical and physico-chemical tests in order to evaluate the properties of these parts. Various sizing of the glass fabric were studied with, for objective, to determine which to offer the best properties. During this study we observed the low impact of the sizing on the chemistry of PA-6. To finish, we set up a reactive sizing which will allow a better interaction fibre/matrix.
Le procédé « Resin Transfer Molding » (RTM) est très largement utilisé pour la production industrielle de matériaux composites à matrice thermodurcissable. En effet, de nombreux domaines tels que l’automobile et l’aéronautique l’emploi couramment. Dans ce travail nous avons adapté ce procédé à la mise en œuvre de matériaux composites à matrice thermoplastique afin de répondre aux critères écologiques et économiques imposés aux industries. Pour cela plusieurs étapes ont été nécessaires. La première fut la sélection d’une chimie robuste, adaptée aux exigences du procédé (faible viscosité initiale du système réactif, temps de polymérisation court, etc). La chimie choisie fut la polymérisation anionique par ouverture de cycle de l’ε-caprolactame dans le but d’obtenir du polyamide-6 (PA-6). Une étude rhéo-cinétique ainsi que les caractérisations physico-chimiques d’un PA-6 obtenu au laboratoire furent réalisé. A la suite de cette étape, des essais en conditions de procédé ont été effectué avec l’utilisation d’un équipement pilote dédié. Ces essais furent la source de modifications et d’optimisations de certains paramètres du procédé. La troisième étape, a consisté à la production de pièces composites avec un renfort de type : tissu unidirectionnel de verre. Cette production fut suivie de tests mécaniques et physico-chimiques afin d’évaluer les propriétés de ces pièces. Différents ensimages de tissu ont été étudiés avec, pour objectif, la détermination de celui offrant les meilleures propriétés. Durant cette étude nous avons observé que la nature de l’ensimage impactait peu la chimie. Pour finir, nous avons mis en place un ensimage réactif qui permettra une meilleure interaction fibre/matrice.
Fichier principal
Vignette du fichier
these.pdf (11.23 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00715806 , version 1 (09-07-2012)

Identifiants

  • HAL Id : tel-00715806 , version 1

Citer

Ghislain van den Broek d'Obrenan. Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique. Autre. INSA de Lyon, 2011. Français. ⟨NNT : 2011ISAL0112⟩. ⟨tel-00715806⟩
2055 Consultations
5149 Téléchargements

Partager

Gmail Facebook X LinkedIn More