R. Ernst, Nerve Endings With Structural Characteristics of Mechanoreceptors in the Human Scleral Spur, Investigative Ophthalmology & Visual Science, vol.35, issue.3, 1994.

J. Engel, J. Chen, C. Liu, B. R. Flachsbart, J. C. Selby et al., Development of Polyimide-based Flexible Tactile Sensing Skin, MRS Proceedings, vol.1, 2003.
DOI : 10.1016/0924-4247(93)00775-Y

J. Galvez, P. Gonzalez-de-santos, and F. Pfeiffer, Intrinsic tactile sensing for the optimization of force distribution in a pipe crawling robot, IEEE/ASME Transactions on Mechatronics, vol.6, issue.1, 2001.
DOI : 10.1109/3516.914388

J. G. Da-silva, A. D. Carvalho, and . Silva, A strain gauge tactile sensor for finger-mounted applications, IEEE Transactions on Instrumentation and Measurement, vol.51, issue.1, 2002.
DOI : 10.1109/19.989890

A. Fiorillo, A piezoresistive tactile sensor, IEEE Transactions on Instrumentation and Measurement, vol.46, issue.1, 1997.
DOI : 10.1109/19.552150

K. Noda, Y. Hashimoto, Y. Tanaka, and I. Shimoyama, MEMS on robot applications, TRANSDUCERS 2009, 2009 International Solid-State Sensors, Actuators and Microsystems Conference, pp.2176-2181, 2009.
DOI : 10.1109/SENSOR.2009.5285608

B. J. Kane, M. R. Cutkosky, and G. T. Kovacs, A piezoresistive three-axial tactile sensor element made by surface micromachining, 2000.

J. H. Shan, T. Mei, L. Sun, D. Y. Kong, Z. Y. Zhang et al., The design and fabrication of a flexible three-dimensional force sensor skin, Proc. IEEE/RSJ Int

D. J. Beebe, A silicon-based tactile sensor for finger-mounted applications, IEEE Transactions on Biomedical Engineering, vol.45, issue.2, 1998.
DOI : 10.1109/10.661263

T. Mei, W. J. Lib, Y. Gea, Y. Chena, L. Nia et al., An integrated MEMS three-dimensional tactile sensor with large force range, Sensors and Actuators A: PhysicalVolume 80, 2000.
DOI : 10.1016/S0924-4247(99)00261-7

M. Leineweber, G. Pelz, M. Schmidt, H. Kappert-;-g, and . Zimmer, New tactile sensor chip with silicone rubber cover " Sensors and Actuators A: Physical

D. De-rossi, F. Carpi, and E. P. Scilingo, Polymer based interfaces as bioinspired`smart bioinspired`smart skins, Advances in Colloid and Interface Science, vol.116, 2005.

S. Ravinder, . Dahiya, . Metta, G. Valle, and . Sandini, Tactile Sensing from Humans to Humanoids, IEEE Transactions on Robotics, vol.26, issue.1, pp.1-20, 2010.

L. Beccai, S. Roccella, L. Ascari, P. Valdastri, A. Sieber et al., Development and Experimental Analysis of a Soft Compliant Tactile Microsensor for Anthropomorphic Artificial Hand, IEEE/ASME Transactions on Mechatronics, vol.13, issue.2, 2008.
DOI : 10.1109/TMECH.2008.918483

P. Dario and D. De-rossi, Tactile sensors and the gripping challenge: Increasing the performance of sensors over a wide range of force is a first step toward robotry that can hold and manipulate objects as humans do, IEEE Spectrum, vol.22, issue.8, pp.46-52, 1985.
DOI : 10.1109/MSPEC.1985.6370785

M. Ohka, Y. Mitsuya, Y. Matsunaga, and S. Takeuchi, Sensing characteristics of an optical three-axis tactile sensor under combined loading, Robotica, vol.22, issue.2, pp.213-221, 2004.
DOI : 10.1017/S0263574703005538

N. Venketesh and R. M. Crowder, A dynamic tactile sensor on photoelastic effect, Sensors and Actuators A, vol.128, pp.217-224, 1997.

W. Splillman and D. Mcmahan, Multimode Fibre Optic. Sensor Based on Photoelastic Effect, 1985.

G. De-maria, A. Minardo, C. Natale, S. Pirozzi, and L. Zeni, Optoelectronic Tactile Sensor Based on Micromachined Scattering Wells, 1st Mediterranean Photonics Conference, 2008.

M. Rothmaier, M. Luong, and F. Clemens, Textile Pressure Sensor Made of Flexible Plastic Optical Fibers, Sensors, vol.8, issue.7, pp.4318-4329, 2008.
DOI : 10.3390/s8074318

L. Renqiang, W. Shuguo-;-l, . Pinkuan-;-w, and . Xiaohui, Curvature optical fiber whiskers for mobile robot guidance, High technology letters, pp.79-83, 2001.

T. Kembu, I. Masachika, and W. Keigo, Principal Curvature Measurement by an Acoustic Tactile Sensor, Transactions of the Japan Society of Mechanical Engineers

N. Futai, K. Matsumoto, and I. Shimoyama, A flexible micromachined planar spiral inductor for use as an artificial tactile mechanoreceptor, Sensors and Actuators A: Physical, vol.111, issue.2-3, pp.2-3, 2004.
DOI : 10.1016/j.sna.2003.08.017

Z. Chi and K. Shida, A new multifunctional tactile sensor for three-dimensional force measurement, Sensors and Actuators A: Physical, vol.111, issue.2-3, pp.2-3, 2004.
DOI : 10.1016/j.sna.2003.10.004

. Sakurai, Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixes, PNAS, vol.102, pp.12321-12325, 2005.

A. N. Muir, C. Sokolov, Z. Reese, and . Bao, Highly sensitive flexible pressure sensors with microstructured rubber as the dielectric layer, Nature Materials, vol.9, pp.859-864, 2010.

. Javey, Nanowire active-matrix circuitry for low-voltage macroscale artificial skin, Nature Materials, vol.9, issue.10, pp.821-826, 2010.

H. Lee, J. Chung, S. Chang, and E. Yoon, Normal and Shear Force Measurement Using a Flexible Polymer Tactile Sensor With Embedded Multiple Capacitors, Journal of MEMS, vol.17, pp.934-942, 2008.

J. G. Da-rocha and S. Lanceros-mendez, Capacitive Sensor for Three-Axis Force Measurements and Its Readout Electronics, IEEE Transactions on Instrumentation and Measurement, vol.58, issue.8, pp.2830-2836, 2009.
DOI : 10.1109/TIM.2009.2016366

Z. Chu, P. Sarro, and S. Middelhoek, Silicon three-axial tactile sensor, Sensors and actuators A, Physical, vol.54, pp.1-3, 1996.

T. Hoshi, A. Okada, Y. Makino, and H. Shinoda, A Wole Body Artificial Skin Based on Cell- Bridge Networking System, Proc. 3rd International Conference on Networked Sensing Systems, pp.55-60, 2006.

H. Lee, E. Chang, and . Yoon, A Flexible Polymer Tactile Sensor: Fabrication and Modular Expandability for Large Area Deployment, Journal of Microelectromechanical Systems, vol.15, issue.6, 2006.
DOI : 10.1109/JMEMS.2006.886021

H. Lee, E. Chang, and . Yoon, Dual-Mode Capacitive Proximity Sensor for Robot Application: Implementation of Tactile and Proximity Sensing Capability on a Single Polymer Platform Using Shared Electrodes, IEEE Sensors Journal, vol.9, issue.12, 2009.
DOI : 10.1109/JSEN.2009.2030660

M. Woytasik, Etude des procédés de fabrication de microdispositifs électromagnétiques sur supports souples pour l'imagerie médicale (IRM) et le contrôle non destructif des matériaux, 2005.

S. Bistac, F. Vallat, and J. Schultz, Adhesion in Polymer/Steel Sandwiches, European Adhesion Conference, EURADH'92, 1992.
DOI : 10.1007/BF00980770

S. L. Cram-;-g, . G. Spinks-;-g, . R. Wallace-;-h, and . Brown, Electropolymerised acrylic coatings for polymer-metal adhesion enhancement, Journal of Adhesion Science and Technology, vol.15, issue.10, pp.10-1403, 2003.
DOI : 10.1163/156856103769172814

Y. Hui, Mechanical and swelling properties of PDMS interpenetratin polymer networks, Polymer, vol.47, issue.17, pp.6226-6235, 2006.

A. Mata, C. Boehm, . Fleischman, S. Gf-muschler, and . Roy, Analysis of connective tissue progenitor cell behavior on various formulations of polydimethylsiloxane smooth and channel micro-textures, Biomedical Microdevices, vol.4, issue.4, pp.267-275, 2002.
DOI : 10.1023/A:1020950022074

S. Rosset, ;. M. Niklaus, . Dubois, and . Shea, Mechanical characterization of a dielectric elastomer microactuator with ion-implanted electrodes, Sensors and Actuators A: Physical, vol.144, issue.1, pp.185-193, 2008.
DOI : 10.1016/j.sna.2007.12.030

M. Rutnakornpituk, Surface and mechanical properties of microporous membranes of poly(ethylene glycol)???polydimethylsiloxane copolymer/chitosan, Polymer, vol.47, issue.23, pp.7909-7917, 2006.
DOI : 10.1016/j.polymer.2006.09.028

F. Schneider, . Fellner, U. Wilde, and . Wallrabe, Mechanical properties of silicones for MEMS, Journal of Micromechanics and Microengineering, vol.18, issue.6, p.65008, 2008.
DOI : 10.1088/0960-1317/18/6/065008

D. Fuard, T. Tzvetkova-chevolleau, S. Decossas, P. Tracqui, and P. Schiavone, Optimization of poly-di-methyl-siloxane (PDMS) substrates for studying cellular adhesion and motility, Proceedings of the Micro-and Nano-Engineering, 2007.
DOI : 10.1016/j.mee.2008.02.004

URL : https://hal.archives-ouvertes.fr/hal-00291575

A. Mata, A. J. Fleischman, and . Roy, Characterization of Polydimethylsiloxane (PDMS) Properties for Biomedical Micro/Nanosystems, Biomedical Microdevices, vol.56, issue.535, pp.281-293, 2005.
DOI : 10.1007/s10544-005-6070-2

P. Rezai, P. R. Selvaganapathy, and G. R. , Plasma enhanced bonding of polydimethylsiloxane (PDMS) with parylene, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, 2011.
DOI : 10.1109/TRANSDUCERS.2011.5969502

P. Peng, R. Rajamani, and X. Yu, Flexible micro-tactile sensor for normal and shear elasticity measurements, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, 2011.
DOI : 10.1109/TRANSDUCERS.2011.5969370

V. A. Ogarev, T. N. Ivanova, V. V. Arslanov, and A. A. Trapeznikov, Spreading of Drops of Polydimethylsiloxane on Solid Horizontal SurfacesS " Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, issue.7, pp.1467-1473, 1973.

M. A. Eddings, M. Johnson, and B. Gale, Determining the optimal PDMS???PDMS bonding technique for microfluidic devices, Journal of Micromechanics and Microengineering, vol.18, issue.6, 2008.
DOI : 10.1088/0960-1317/18/6/067001

M. Kang and L. Guo, Metal transfer assisted nanolithography on rigid and flexible substrates, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.26, issue.6, pp.2421-2426, 2008.
DOI : 10.1116/1.2993172

K. Lim, W. J. Chang, Y. M. Koo, and R. Bashir, Reliable fabrication method of transferable micron scale metal pattern for poly(dimethylsiloxane) metallization, Lab on a Chip, vol.15, issue.4, pp.578-80, 2006.
DOI : 10.1039/b514755g

M. Toprak, D. Kim, M. Mikhailova, and M. Muhammed, Patterning 2D Metallic Surfaces by Soft Lithography, Proc. 705 Y7.22, pp.1-6, 2002.
DOI : 10.1016/S0304-8853(99)00745-3

S. Lacour, Z. Jones, S. Suo, and . Wagner, Design and Performance of Thin Metal Film Interconnects for Skin-Like Electronic Circuits, IEEE Electron Device Letters, vol.25, issue.4, pp.179-81, 2004.
DOI : 10.1109/LED.2004.825190

J. Jones, S. Lacour, S. Wagner, and Z. Suo, A method for making elastic metal interconnects, Mater. Res. Soc. Symp. Proc, pp.769-775, 2003.

S. Befahy, . Yunus, J. Burguet, . Heine, M. Dague et al., Metallization Process for Polydimethylsiloxane (PDMS) Rubber, MRS Proceedings, vol.2, pp.1009-1015, 2007.
DOI : 10.1016/S0032-3861(00)00039-2

S. Lacour, . Chan, T. Wagner, Z. Li, and . Suo, Mechanisms of reversible stretchability of thin metal films on elastomeric substrates, Applied Physics Letters, vol.88, issue.20, 2006.
DOI : 10.1063/1.2201874

N. Jasbir and H. Schmid, A sacrificial SU-8 mask for direct metallization on PDMS

J. M. Engel, . Chen, . Ryu, C. Pandya, . Tucker et al., Multi-layer embedment of conductive and non-conductive PDMS for all-elastomer MEMS, Technical Digest of the 12th Solid State Sensors, Actuator, and Microsystems Workshop, pp.4-8, 2006.

F. Niklaus, E. Enoksson, G. Kälvesten, ]. Stemme, . Loo et al., Low-temperature full wafer adhesive bonding, Novel pattern transfer technique on flexible polymer structure for advance microfluidic system, pp.100-107, 2001.
DOI : 10.1088/0960-1317/11/2/303

J. Chen, L. Huang, C. Chu, and C. Peizen, Si Microcap transfer by solder bonding and theatre breaking, J. Micromech. Microeng, vol.12124, pp.960-1317310, 2002.

Y. Lee, J. W. Cheng, . Kim, S. Yanga, H. Honga et al., Cr pattern transfer on PMMA by adhesion control with fluorosilane " . NEMS Au pattern transfer by adhesion control with ozone, Applied Surface Science, vol.254, issue.17, pp.5607-5611, 2008.

A. L. Thangawng, M. A. Swartz, M. R. Glucksberg, and R. S. Ruoff, Bond-detach Transfer of PDMS patterns Lithographic techniques DOI: 10.1002/smll Transfer of Cr patterns with releasing layer and pulse laser heating, J. Micromech. Microeng, vol.17, pp.1252-1256, 2007.

H. Kawata, K. Ryugou, S. Ohta, M. Yasuda, Y. J. Hirai-jap et al., MEMS packaging process by film transfer using an antiadhesive layer Microsystem Technologies DOI: 10 Pattern transfer with PDMS printing stamp Temperaturecontrolled transfer and self-wiring for multi-color light-emitting diode array Transfer printing of dies Selective distribution of devices from one donor wafer Fabrication of LIGA mold insert using Ni-PTFE composite micro-electroforming Flexible micro-tactile sensor for normal and shear elasticity measurements, Step Transfer Process without lithography, pp.48-1277, 1007.

B. J. Jeon, L. K. Sangwha-;-j, and . Lee, Adhesion characteristics of copper thin film deposited on PET substrate by electron cyclotron resonance???metal organic chemical vapor deposition, Surface and Coatings Technology, vol.202, issue.9, pp.257-8972, 2008.
DOI : 10.1016/j.surfcoat.2007.08.015

E. Neubauer, S. Chotikaprakhan, D. Dietzel, B. K. Bein, J. Pelzl et al., Loss of adhesion strength of PVD Cu films on carbon substrates after heat treatment and correlated effects on the thermal interface properties, Applied Surface Science, vol.252, issue.15, pp.5432-5436, 2005.
DOI : 10.1016/j.apsusc.2005.12.086

;. A. Dietzel, . K. Mansanares-;-b, and . Bein, The influence of mechanical adhesion of copper coatings on carbon surfaces on the interfacial thermal contact resistance, Thin solid films, pp.40-6090, 2003.

Y. Chih-hao, L. Shih-chin, W. Jun-ming, and L. Tien-chai, The properties of copper films deposited on polyimide by nitrogen and oxygen plasma pre-treatment, Applied surface science, pp.169-4332, 2005.

Y. Denis, W. Yu, and F. Spaepena, The yield strength of thin copper films on Kapton, Journal of applied physics, vol.95, issue.6, 2003.

F. Yang, Thickness effect on the indentation of an elastic layer, Materials Science and Engineering: A, vol.358, issue.1-2, pp.226-232, 2003.
DOI : 10.1016/S0921-5093(03)00289-2

M. Liu, J. Sun, C. Bock, Q. Chen, and . Yang, Thickness-dependent mechanical properties of polydimethylsiloxane membranes, Journal of Micromechanics and Microengineering, vol.19, issue.3, p.35028, 2009.
DOI : 10.1088/0960-1317/19/3/035028

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, 1992.
DOI : 10.1557/JMR.1992.0613

V. Figure, Photos de gouttes de liquide sur deux solides plans. L'angle ? est appelé angle de contact

C. J. Van-oss, Interfacial forces in aqueous media, 1994.

D. K. Owens and R. C. Wendt, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, vol.13, issue.8, pp.1741-1747, 1969.
DOI : 10.1002/app.1969.070130815

A. Neumann, R. Good, and C. Hope, An equation-of-state approach to determine surface tensions of low-energy solids from contact angles, Journal of Colloid and Interface Science, vol.49, issue.2, pp.291-304, 1974.
DOI : 10.1016/0021-9797(74)90365-8