C. Amadio and M. Fragiacomo, Effective width evaluation for steel???concrete composite beams, Journal of Constructional Steel Research, vol.58, issue.3, pp.373-388, 2002.
DOI : 10.1016/S0143-974X(01)00058-X

P. Ansourian, An application of the method of finite elements to the analysis of composite floor systems. Proceeding of the Institution of civil Engineers, pp.699-726, 1975.

J. M. Aribert and K. Abdel-aziz, Calcul des poutres mixtes jusqu'à l'état ultime avec un effet de soulèvement à l'interface acier béton, Construction métallique, p.4, 1985.

J. M. Aribert and D. Bitar, Optimisation du dimensionnement en connexion partielle de poutres de planchers mixtes réalisés avec un bac en tôle mince nervurée. Revue construction métallique, pp.43-76, 1989.

J. M. Aribert, Slip and uplift measurements along the steel and concrete interface of various types of composite beams, Proceedings of the international workshop RILEM " Testing of materials for structures " Chapman and Hall, 1990.

Y. Arizumi and S. Hamada, Elastic-plastic analysis of composite beams with incomplete interaction by finite element method, Computers and Structures, vol.4, pp.5-6453, 1981.

A. Ayoub and F. C. Filippou, Mixed Formulation of Nonlinear Steel-Concrete Composite Beam Element, Journal of Structural Engineering, vol.126, issue.3
DOI : 10.1061/(ASCE)0733-9445(2000)126:3(371)

R. Baertschi, Load-Bearing Behaviour of composite beams in Low Degrees of Partial Shear Connection, Thèse de Doctorat, 2005.

K. Baskar, N. E. Shanmugam, and V. Thevendran, Finite-Element Analysis of Steel???Concrete Composite Plate Girder, Journal of Structural Engineering, vol.128, issue.9, pp.91158-1168, 2000.
DOI : 10.1061/(ASCE)0733-9445(2002)128:9(1158)

Z. P. Bazant and B. H. Oh, Crack band theory for fracture of concrete, Mat. And Structures, vol.16, pp.93-155, 1983.

Z. P. Bazant and B. H. Oh, Microplane Model for Progressive Fracture of Concrete and Rock, Journal of Engineering Mechanics, vol.111, issue.4, pp.559-582, 1985.
DOI : 10.1061/(ASCE)0733-9399(1985)111:4(559)

H. Bode and J. Schanzenbach, Das Tragverhalten von Verbundträgern bei Berücksichtigung die Dübelnachgiebigkeit (Load-carrying capacity of composite girders by considering the elasticity of connectors), Der Stahlbau, vol.583, pp.65-74, 1989.

J. Brozzetti, Design development of steel-concrete composite bridges in France, Journal of Constructional Steel Research, vol.55, issue.1-3, pp.229-243, 2000.
DOI : 10.1016/S0143-974X(99)00087-5

J. Bujnak, A. Bouchair, J. Vican, and C. C. Baniotopoulos, Linear elastic model for the assessment of partial interaction between steel and concrete in composite beam, 2nd International Conference "From Scientific Computing to Computational Engineering, 2006.

J. Bujnak and A. Bouchair, Modèle analytique de poutre mixte acier-béton avec interaction partielle, 1er congrès international de mécanique avancée, pp.2-4, 2006.

J. Bujnak and A. Bouchair, Numerical model for steel concrete composite beam with partial shear connection, 4th Eurosteel Conference, pp.17-24, 2005.

J. Bujnak, A. Bouchair, and K. Furtak, Finite element modelling of steel-concrete composite beams, Proceeding of the 6th European Conference of Young research and science workers in transport and telecommunications, pp.27-29, 2005.

S. Bullo, D. Marco, and R. , A simplified method for assessing the ductile behaviour of stud connectors in composite beams with high strength concrete slab, Journal of Constructional Steel Research, vol.60, issue.9, pp.1387-1408, 2004.
DOI : 10.1016/j.jcsr.2004.01.001

J. Chinn, Pushout Tests on Lightweight Composite Slabs, Engineering Journal, AISC, vol.2, pp.129-134, 1965.

K. F. Chung, Composite beams and floor systems fully integrated with building services, Progress in Structural Engineering and Materials, vol.57, issue.2, pp.169-178, 2002.
DOI : 10.1002/pse.116

B. J. Daniels and M. Crisinel, Composite Slab Behavior and Strength Analysis. Part I: Calculation Procedure, Journal of Structural Engineering, vol.119, issue.1, pp.116-151, 1993.
DOI : 10.1061/(ASCE)0733-9445(1993)119:1(16)

M. S. Demoulin, Modélisation élasto-plastique endommageable d'éléments de poutres en béton armé : application sur Castem, 1994.

C. Donneux, Étude du mécanisme de transfert des flexions à la jonction poutre poteau dans les structures en portiques mixtes soumises à une action sismique, Thèse de doctorat, 2001.

S. El-tawil and G. G. Deirlein, Nonlinear analyses of mixed steel concrete moment frames. Part I.: Beam column element formulation, J. Struct. Eng, vol.127, pp.6647-655, 1999.

C. Faella, E. Martinelli, and E. Nigro, Shear Connection Nonlinearity and Deflections of Steel???Concrete Composite Beams: A Simplified Method, Journal of Structural Engineering, vol.129, issue.1, pp.1-12, 2003.
DOI : 10.1061/(ASCE)0733-9445(2003)129:1(12)

P. Feenstra, D. Borst, and R. , A composite plasticity model for concrete, International Journal of Solids and Structures, vol.33, issue.5, pp.5707-730, 1996.
DOI : 10.1016/0020-7683(95)00060-N

U. A. Girhamar and V. K. Gopu, Composite Beam???Columns with Interlayer Slip???Exact Analysis, Journal of Structural Engineering, vol.119, issue.4
DOI : 10.1061/(ASCE)0733-9445(1993)119:4(1265)

G. G. Goble, Shear Strength of Thin Flange Composite Specimens, Engineering Journal, AISC, vol.5, pp.262-65, 1968.

K. Jalloul, Modélisation élasto-plastique d'une structure béton armé en flexion composée, Thèse UFR CUST n°201, 1990.

B. Jarek, Fissuration de la dalle dans les poutres mixtes acier béton, Thèse de doctorat, 2004.

R. P. Johnson and N. Molestra, PARTIAL SHEAR CONNECTION IN COMPOSITE BEAMS FOR BUILDINGS., Proceedings of the Institution of Civil Engineers, vol.91, issue.4, pp.679-704, 1991.
DOI : 10.1680/iicep.1991.17485

R. P. Johnson, Composite Structures of Steel and Concrete, Beams, Columns, Frames and Applications in Building, 1975.

R. P. Johnson and D. J. Oehlers, Analysis and design for longitudinal shear in composite T-beams, Proceedings of the institution of civil engineers, pp.2989-1021, 1981.

R. P. Johnson, R. D. Greenwood, and K. Van-dalen, Stud shear-connectors in hogging moment regions of composite beams, The Struct, Eng, vol.47, pp.9345-350, 1969.

B. Jurkiewiez and S. Braymand, Experimental study of a pre-cracked steel???concrete composite beam, Journal of Constructional Steel Research, vol.63, issue.1, pp.1135-144, 2007.
DOI : 10.1016/j.jcsr.2006.03.013

URL : https://hal.archives-ouvertes.fr/hal-00593517

A. Laane, Post-Critical Behaviour of Composite Bridges Under Negative Moment and Shear, Thèse N° 2889, 2003.

J. P. Lebet, Comportement des ponts mixtes acier béton avec interaction partielle de la connexion et fissuration du béton, Thèse ICOM n° 661. Lausanne : EPFL, 1987.

J. Machacek and J. Studnicka, Perforated shear connectors, Steel and Composite Structures, vol.2, issue.1, pp.151-66, 2002.
DOI : 10.12989/scs.2002.2.1.051

W. T. Marshall, H. M. Nelson, and H. K. Banerjee, An Experimental Study of the use of High-Strength Friction-Grip Bolts as Shear Connectors in Composite Beams, The Structural Engineer, pp.4-171, 1971.

B. Masscicotte, A. E. Elwi, and J. G. Macgregor, Tension stiffening model for planar reinforced concrete members, J. Struct. Engrg. ASCE, vol.116, pp.93039-3058, 1990.

J. Nie and C. S. Cai, Steel???Concrete Composite Beams Considering Shear Slip Effects, Journal of Structural Engineering, vol.129, issue.4, pp.4495-506, 2003.
DOI : 10.1061/(ASCE)0733-9445(2003)129:4(495)

J. Nie, J. Fan, and C. S. Cai, Stiffness and Deflection of Steel???Concrete Composite Beams under Negative Bending, Journal of Structural Engineering, vol.130, issue.11, pp.111842-1851, 2004.
DOI : 10.1061/(ASCE)0733-9445(2004)130:11(1842)

N. M. Newmark, C. P. Siess, and I. M. Viest, Tests and analysis of composite beams with incomplete interaction, Proceedings of the Society of Experimental Stress Analysis, pp.175-92, 1951.

S. Y. Noh, W. B. Krätzig, and K. Meskouris, Numerical simulation of serviceability, damage evolution and failure of reinforced concrete shells, Computers & Structures, vol.81, issue.8-11, pp.8-11843, 2003.
DOI : 10.1016/S0045-7949(02)00421-2

D. J. Oehlers and C. G. Coughan, The shear stiffness of stud shear connections in composite beams, Journal of Constructional Steel Research, vol.6, issue.4, pp.4273-284, 1986.
DOI : 10.1016/0143-974X(86)90008-8

D. J. Oehlers and R. P. Johnson, The Strength of Stud Shear Connections in Composite Beams, The Structural Engineer, pp.244-292, 1987.

D. J. Oehlers, Splitting Induced by Shear Connectors in Composite Beams, Journal of Structural Engineering, vol.115, issue.2, pp.2341-362, 1989.
DOI : 10.1061/(ASCE)0733-9445(1989)115:2(341)

D. J. Oehlers and M. A. Bradford, Composite steel and concrete structural members, 1995.

D. J. Oehlers and M. A. Bradford, Elementary Behaviour of Composite steel and concrete structural members, 1999.

D. J. Oehlers and G. Sved, Composite Beams with Limited-Slip-Capacity Shear Connectors, Journal of Structural Engineering, vol.121, issue.6
DOI : 10.1061/(ASCE)0733-9445(1995)121:6(932)

E. C. Oguejiofor and M. U. Hosain, Numerical analysis of push-out specimens with perfobond rib connectors, Computers & Structures, vol.62, issue.4, pp.617-641, 1996.
DOI : 10.1016/S0045-7949(96)00270-2

E. C. Oguejiofor and M. U. Hosain, A parametric study of perfobond rib shear connectors, Canadian Journal of Civil Engineering, vol.21, issue.4, pp.614-639, 1994.
DOI : 10.1139/l94-063

J. G. Ollgaard, R. G. Slutter, and J. W. Fisher, Shear strength of stud connectors in lightweight and normal-density concrete, AISC Engineering Journal, vol.8, pp.2-55, 1971.

M. D. Rambo-roddenberry, Behavior and strength of welded stud shear connectors, Thèse Virginia Polytechnic Institute, p.251, 2002.

S. Rankovi? and D. Dreni?, Static strength of the shear connectors in steel-concrete composite beams ? regulations and research analysis, Facta Universitatis, Series: Architecture and Civil Engineering, pp.4251-259, 2002.

G. Ranzi, M. A. Bradford, and B. Uy, A general method of analysis of composite beams with partial interaction, Steel and Composite Structures, pp.3169-184, 2003.

M. R. Salari and E. Spacone, Finite element formulations of one-dimensional elements with bond-slip, Engineering Structures, vol.23, issue.7, pp.7815-826, 2001.
DOI : 10.1016/S0141-0296(00)00094-8

W. M. Sebastian, Ductility requirements in connections of composite flexural structures, International Journal of Mechanical Sciences, vol.45, issue.2, pp.235-251, 2003.
DOI : 10.1016/S0020-7403(03)00054-7

W. M. Sebastian and R. E. Mcconnel, Nonlinear FE Analysis of Steel-Concrete Composite Structures, Journal of Structural Engineering, vol.126, issue.6
DOI : 10.1061/(ASCE)0733-9445(2000)126:6(662)

R. Seracino, T. Lee, . Ch, C. T. Lim, and Y. L. Lim, Partial interaction stresses in continuous composite beams under serviceability loads, Journal of Constructional Steel Research, vol.60, issue.10, pp.101525-1543, 2004.
DOI : 10.1016/j.jcsr.2004.01.002

R. Seracino, D. J. Oehlers, and M. F. Yeo, Partial-interaction flexural stresses in composite steel and concrete bridge beams, Engineering Structures, pp.1186-1193, 2001.

Y. Sieffert, L'entretoisement des ponts mixtes multi poutres ferroviaires, Thèse de doctorat, 2004.

E. Spacone and S. El-tawil, Nonlinear Analysis of Steel-Concrete Composite Structures: State of the Art, Journal of Structural Engineering, vol.130, issue.2, pp.159-168, 2004.
DOI : 10.1061/(ASCE)0733-9445(2004)130:2(159)

R. G. Slutter and G. C. Driscoll, Flexural Strength of Steel-Concrete Composite Beams, J. Struct. Div, vol.91, pp.271-99, 1965.

C. S. Shim, P. G. Lee, and T. Y. Yoon, Static behavior of large stud shear connectors, Engineering Structures, pp.1853-1860, 2004.

B. Szabo, Influence of shear connectors on the elastic behaviour of composite girders, Thèse de doctorat, 2006.

J. W. Tedesco, J. M. Stallings, and D. R. Tow, Finite element method analysis of bridge girderdiaphragm interaction, Computers & Structures, vol.56, pp.2-461, 1995.

M. Thomann, Connexions par adhérence pour les ponts mixtes acier-béton, Thèse ICOM n° 3381, p.211, 2005.

I. Valente and P. J. Cruz, Experimental analysis of Perfobond shear connection between steel and lightweight concrete, Journal of Constructional Steel Research, vol.60, issue.3-5, pp.465-479
DOI : 10.1016/S0143-974X(03)00124-X

Y. C. Wang, Deflection of Steel-Concrete Composite Beams with Partial Shear Interaction, Journal of Structural Engineering, vol.124, issue.10, pp.101159-1165, 1998.
DOI : 10.1061/(ASCE)0733-9445(1998)124:10(1159)

H. Xu, Modélisation numérique et étude de comportement de poutres mixtes continues avec phénomènes de semi-continuité et glissement, Thèse de doctorat, 1995.

S. Zhou, D. C. Rizos, and M. F. Petrou, Effects of superstructure flexibility on strength of reinforced concrete bridge decks, Computers & Structures, vol.82, issue.1, pp.1-13, 2003.
DOI : 10.1016/j.compstruc.2003.08.009

A. Lachal, Fiche d'Essai : Essai push-out monotone, Laboratoire d'essai, INSA Rennes, 2004.

J. M. Aribert, Construction mixte acier béton -Généralités. Caractéristiques des matériaux, Editions TI, Sciences&Techniques [en ligne]. Disponible sur : <http://www.techniquesingenieur .fr/dossier, p.2560, 2006.

J. M. Aribert, Construction mixte acier béton ? Calcul des poutres mixtes, Editions TI, Sciences&Techniques [en ligne]. Disponible sur : <http://www.techniquesingenieur .fr/dossier, p.2561, 2006.