C. G. Adam and M. Nosonovsk, Contact modeling ??? forces, Tribology International, vol.33, issue.5-6, pp.431-442, 2000.
DOI : 10.1016/S0301-679X(00)00063-3

O. Adnan, T. Emsettin, D. A. Murat, and S. Sadri, Stress analysis of shrink-fitted joints for various fit forms via finite element method Assemblage frettés sur portée cylindrique : fonction, réalisation, calcul, AFN, 80] NF E22-622 Assemblage frettés dimension, tolérances et états de surface, pp.281-289, 1980.

D. M. Bailley and R. S. Sayles, Effect of Roughness and Sliding Friction on Contact Stresses, Journal of Tribology, vol.113, issue.4, pp.729-738, 1991.
DOI : 10.1115/1.2920686

K. J. Bathe and P. A. Bouzinov, On the constraint function method for contact problems, Computers & Structures, vol.64, issue.5-6, pp.5-6, 1997.
DOI : 10.1016/S0045-7949(97)00036-9

. Bel, S. Belghith, S. Meslini, H. Belhadjsalah, and J. L. Ligier, Modeling of contact between rough surface using homogenization technique, C. R. Mécanique, pp.338-386, 2010.

F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, American Journal of Physics, vol.19, issue.7, 1958.
DOI : 10.1119/1.1933017

J. Booker, C. Truman, S. Wittig, and Z. Mohammed, A Comparison of Shrink-fit Holding Torque Using Probabilistic, Micro-mechanical and Experimental Approaches, Proceedings of the Institution of Mechanical Engineers, pp.175-187, 2004.

J. Booker and C. Truman, measuring the coefficient of friction for use in shrink fit calculation. Experimental Techniques, no

J. Boulanger, tolérances et écart dimensionnel, géométrique et d'état de surfaces, traité de génie mécanique, pp.7-010, 1991.

H. Boutoutaou, M. Bouazziz, and J. F. Fontaine, Modeling of interference fits taking form defects of the surfaces in contact into account, Materials & Design, vol.32, issue.7, pp.3692-3701, 2011.
DOI : 10.1016/j.matdes.2011.03.059

URL : https://hal.archives-ouvertes.fr/hal-00784824

W. R. Chang, I. Etsion, and D. B. Bogy, An Elastic-Plastic Model for the Contact of Rough Surfaces, Journal of Tribology, vol.109, issue.2, pp.87-111, 1975.
DOI : 10.1115/1.3261348

. Chi and T. H. Childs, The persistence of roughness between surfaces in static contact, Proc. R. Soc. Lond, pp.353-388, 1977.

Y. P. Chiu and M. J. Hartnett, A Numerical Solution for the Contact Problem Involving Bodies With Cylindrical Surface Considering Cylinder Effect, Journal of Tribology, vol.109, issue.3, pp.479-486, 1987.
DOI : 10.1115/1.3261478

D. Croccolo, M. Deagostinis, and N. Vincenzi, Static and dynamic strength evaluation of interference fit and adhesively bonded cylindrical joints, International Journal of Adhesion and Adhesives, vol.30, issue.5, pp.359-366, 2010.
DOI : 10.1016/j.ijadhadh.2010.03.003

J. Y. Dantan, A. Ballu, and L. Mathieu, Geometrical product specifications ??? model for product life cycle, Computer-Aided Design, vol.40, issue.4, pp.493-501, 2002.
DOI : 10.1016/j.cad.2008.01.004

D. Lorenzi, L. Temizer, I. Wriggers, P. Zavarise, and G. , A large deformation frictional contact formulation using NURBS-based isogeometric analysis, Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/nme, p.3159, 2011.

F. Devries, F. Dumontet, G. Duvaut, F. Léné, O. Eyercioglu et al., Homogenization and damage for composite structures, International Journal for Numerical Methods in Engineering, vol.11, issue.2, pp.285-298, 1989.
DOI : 10.1002/nme.1620270206

F. Feyel, A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua, ComputerMethods in AppliedMechanics and Engineering, pp.3233-324453, 1997.
DOI : 10.1016/S0045-7825(03)00348-7

J. F. Fontaine, G. M. Yang, J. C. Coquille, and M. Lambertin, Tight Fit Desing Taking Into Account Form and Surface Defects, pp.183-191, 2002.
DOI : 10.1007/978-94-015-9966-5_22

URL : https://hal.archives-ouvertes.fr/hal-00803920

J. F. Fontaine and I. E. Siala, Form defect influence on the shrinkage fit characteristics, European Journal of Mechanics - A/Solids, vol.17, issue.1, pp.107-119, 1998.
DOI : 10.1016/S0997-7538(98)80066-1

J. F. Fontaine and I. E. Siala, Optimization of the cylindrical interface shape of a shrinkage fit, J of Mat. Proc. Tech, vol.74, pp.1-3, 1998.

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proc. R. Soc. London, pp.300-319, 1966.
DOI : 10.1098/rspa.1966.0242

J. A. Greenwood and J. H. Tripp, The contact of two nominally flat rough surface., Contact of nominally flat surface, Proc. Inst. Mech. Eng, vol.185, pp.300-319, 1970.

. Hos, F. Hosseinzadeh, A. H. Mahmoudi, C. E. Truman, and D. J. Smith, Application of Deep Hole Drilling to the Measurement and Analysis of Residual Stresses in Steel Shrink-Fitted Assemblies

H. Ike and A. Makinouchi, Effect of lateral tension and compression on plane strain flattening processes of surface asperities lying over a plastically deformable bulk, Wear, vol.140, issue.1, pp.17-38, 1990.
DOI : 10.1016/0043-1648(90)90119-U

N. Norme and . Iso, 4287 Spécification Géométrique des Produits (GPS) Etat de surface : Terme et définition des paramètres d'état de surface, pp.12-1998

A. R. Johnson and C. J. Quigley, Frictionless geometrically non-linear contact using quadratic programming, International Journal for Numerical Methods in Engineering, vol.38, issue.1, pp.127-144, 1989.
DOI : 10.1002/nme.1620280110

F. Lanoue, A. Vadean, and B. Sanschagrin, Finite element analysis and contact, modeling considerations of interference fits for fretting fatigue strength calculations. Simulation. Modeling Practice and Theory, pp.1587-1602, 2009.

. Lew, R. Lewis, M. Marshall, and R. S. Dwyer-joyce, Measurement of interface pressure in interference fits, Proceedings of the Institution of Mechanical Engineers, pp.127-139, 2005.

S. J. Lewis, S. Hossain, J. D. ·booker, C. E. Truman, U. Stuhr et al., Measurement of Torsionally Induced Shear Stresses in Shrink-Fit Assemblies, Metrology and Properties of Engineering Surfaces, pp.637-651, 2001.
DOI : 10.1007/s11340-008-9175-8

. Mcco and J. I. Mccool, Comparison of models for the contact of rough surfaces, Wear, vol.107, issue.1, pp.37-60, 1986.
DOI : 10.1016/0043-1648(86)90045-1

P. R. Nayak, Random process model of rough surfaces in plastic contact, Wear, vol.26, issue.3, pp.305-333, 1973.
DOI : 10.1016/0043-1648(73)90185-3

J. T. Oden and E. B. Pires, Algorithms and numerical results for finite element approximations of contact problems with non-classical friction laws, Computers & Structures, vol.19, issue.1-2, pp.137-147, 1984.
DOI : 10.1016/0045-7949(84)90212-8

J. C. Passieux, Approximation radiale et méthode LATIN multi-échelle en temps et espace, thèse de doctorat de l'ENS de Cachan, p.0, 2008.

F. Robbe-valloire, R. Progri, B. Paffoni, and R. Gras, Modelisation de la topographie microgeometrique Application a l'ecrasement de surfaces, Materiaux et techniques, pp.3-4, 2000.

F. Robbe-valloire, B. Paffoni, and R. Progri, Load transmission by elastic, elastoplastic or fully plastic deformation of rough interface asperities, Mech. Mater, vol.84, pp.617-633, 2001.

E. V. Ryzhov, Determination of contact area of part joined by an interference fit Issue 3, 8-10 [SAN, 74] Sanchez-Palencia E. Comportement local et macroscopique d'un type de milieux physiques hétérogènes, 96] Siala I.E. Modélisation mécanique des assemblages obtenus par procédé de frettage avec la prise en compte du défaut de forme, pp.331-351, 1974.

J. C. Simo, P. Wriggers, and R. L. Taylor, A perturbed Lagrangian formulation for the finite element solution of contact problems, Computer Methods in Applied Mechanics and Engineering, vol.50, issue.2, pp.163-180, 1985.
DOI : 10.1016/0045-7825(85)90088-X

L. Sniezek, J. Zimmerman, and A. Zimmerman, The carrying capacity of conical interference-fit joints with laser reinforcement zones, Journal of Materials Processing Technology, vol.210, issue.6-7, pp.914-925, 2010.
DOI : 10.1016/j.jmatprotec.2010.02.004

M. P. Sutcliffe, Surface asperity deformation in metal forming processes, International Journal of Mechanical Sciences, vol.30, issue.11, pp.847-868, 1988.
DOI : 10.1016/0020-7403(88)90010-0

I. Temizer and P. Wriggers, An adaptive method for homogenization in orthotropic nonlinear elasticity, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.35-36, pp.3409-3423, 1956.
DOI : 10.1016/j.cma.2007.03.017

C. E. Truman and J. D. Booker, Analysis of a shrink-fit failure on a gear hub/shaft assembly, Engineering Failure Analysis, vol.14, issue.4, pp.557-572, 2007.
DOI : 10.1016/j.engfailanal.2006.03.008

J. B. Wiliamson and R. T. Hunt, Asperity persistence and the real area of contact, Proc. R. Soc. Lond., A. 327, pp.147-157, 1972.

G. M. Yang, J. C. Coquille, J. F. Fontaine, and M. Lambertin, Influence of roughness on characteristics of tight interference fit of a shaft and a hub, International Journal of Solids and Structures, vol.38, issue.42-43, pp.42-43, 2001.
DOI : 10.1016/S0020-7683(01)00035-X

URL : https://hal.archives-ouvertes.fr/hal-00786790

G. M. Yang, J. C. Coquille, J. F. Fontaine, and M. Lambertin, Contact pressure between two rough surfaces of a cylindrical fit, Journal of Materials Processing Technology, vol.123, issue.3, pp.490-497, 2002.
DOI : 10.1016/S0924-0136(02)00139-5

URL : https://hal.archives-ouvertes.fr/hal-00786788

G. M. Yang, J. C. Coquille, J. F. Fontaine, and M. Lambertin, Modélisation des procédés d'assemblage par frettage en prenant en compte les défauts micro-géométriques de l'interface , 4 ème colloque en Calcul des Structures, pp.18-21, 1999.

G. Zavarise, P. Wriggers, and A. Schrefler, A method for solving contact problems, International Journal for Numerical Methods in Engineering, vol.19, issue.3, pp.473-498, 1998.
DOI : 10.1002/(SICI)1097-0207(19980615)42:3<473::AID-NME367>3.0.CO;2-A

Y. Zhang, B. Mcclain, and X. D. Fang, Design of interference fits via finite element method, International Journal of Mechanical Sciences, vol.42, issue.9, pp.1835-1850, 2000.
DOI : 10.1016/S0020-7403(99)00072-7

H. W. Zhang, A. H. Liao, and C. H. Wu, Numerical simulation of contact problems in vane machinery by a parametric quadratic programming method, Archive of Applied Mechanics, vol.214, issue.A, pp.421-437, 2007.
DOI : 10.1007/s00419-006-0099-4