Space Harmonics in Saturated Induction Motors -Effect of Geometric and Winding Parameters, International Conference on Electrical Machines, pp.13-15, 1990. ,
Induction Machines Gordon and Breach Science Publishers, 150 Fifth Avenue, 1970. ,
Saturation Factors for Leakage Reactance of Induction Motors with Skewed Rotors, IEEE Transactions on Power Apparatus and Systems, vol.82, issue.68, pp.82-716, 1963. ,
DOI : 10.1109/TPAS.1963.291389
Optimization of Three-Phase Induction Motor Dsign -PART I: Formulation of the Optimization Technique, IEEE Transactions on Energy Conversion, issue.2 3, pp.407-414, 1987. ,
Optimization of Three-Phase Motor Design -PART II: The Efficiency and Cost of an Optimal Design, IEEE Transactions on Energy Conversion, issue.2 3, pp.415-421, 1987. ,
Design optimization of permanent magnet DC motors, IEEE Transactions on Industry Applications, vol.26, issue.4, pp.786-792, 1990. ,
DOI : 10.1109/28.56006
Automatic Generation of Softwares for the Design of Static Converters, 6th European Conference on Power, Electronics and Applications (EPE'95), pp.19-21, 1995. ,
Etude de différentes représentations du contacteur électromagnétique dans un but de conception innovante, Institut National Polytechnique de Grenoble, 1994. ,
Comparison of alternative skew-effect parameters of cage induction motors, Proceedings IEE, vol.118, issue.7, pp.879-883, 1971. ,
Polyphase Induction Motors-Analysis, Design, and Application, MARCEL DEKKER, 675 pages, 1989. ,
Digital-computer program for design synthesis of large squirrel-cage induction motors, Proceedings of the Institution of Electrical Engineers, vol.114, issue.2, pp.261-267, 1967. ,
DOI : 10.1049/piee.1967.0052
Saturated leakage reactances of cage induction motors, Proceedings of the Institution of Electrical Engineers, vol.116, issue.8, pp.1395-1404, 1969. ,
DOI : 10.1049/piee.1969.0253
The watchdog technique for forcing convergence in algorithms for constrained optimization, Mathematical Programming Study, vol.16, pp.1-7, 1982. ,
DOI : 10.1007/BFb0120945
Origins of load losses in induction motors with cast aluminium rotors, Proceedings of the Institution of Electrical Engineers, vol.112, issue.12, pp.2317-2332, 1965. ,
DOI : 10.1049/piee.1965.0386
Programmer Windows avec TURBO C++, Editions Eyrolles, pp.2-212, 1994. ,
Contribution de la modélisation floue à la conception en génie électrique, Thèse de docteur, 1994. ,
E un système d'aide à la conception d'appareillage électriques, 1991. ,
Sizing Equations and Magnetic Circuit Design for Single-Sided Linear Induction Motors, International Conference on Electrical Machines, pp.13-15498, 1990. ,
Finite Element Optimization of the Magnetic Field in a Quadrupole", ELECTRICAL AND POWER SYSTEMS modelling and simulation, pp.205-207, 1989. ,
Optimum Machine Design by Digital Computer, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, vol.78, issue.3, pp.478-487, 1959. ,
DOI : 10.1109/AIEEPAS.1959.4500359
Exploration, Optimisation et Apprentissage Automatique, 1994. ,
Modeling And Design Optimization of Permanent Magnet Motors, Electric Machines and Power systems, pp.71-92, 1992. ,
Skew Leakage in Induction Machines, pp.43-46, 1994. ,
Multicriterial optimisation of squirrel-cage induction motor design, IEE Proceedings B Electric Power Applications, vol.136, issue.6, pp.299-307, 1989. ,
DOI : 10.1049/ip-b.1989.0039
Le dimensionnement des actionneurs ??lectriques : un probl??me de programmation non lin??aire, Journal de Physique III, vol.3, issue.2, pp.285-301, 1993. ,
DOI : 10.1051/jp3:1993132
Contribution à la conception des actionneurs électriques par formulation en termes d'optimisation, 1993. ,
Optimisation de formes de machines électriques à l'aide d'un logiciel éléments finis et de la méthode des pénalités intérieures étendues, 1993. ,
Version 15, 1993. ,
The Automated Design of Electromagnetic Devices -Fact or Fiction?, International Compumag Society Newsletter, vol.2, issue.12, pp.6-9, 1995. ,
Knowledge Based system I, Workshop on Applications of Intelligent Systems Techniques to Optimal Design of Electromagnetics Devices, pp.900-1700, 1995. ,
Dimensionnement optimal d'un moteur sans balais à aimants Néodyme- Fer-Bore, Thèse de docteur, Université de Franche-Comté en sciences pour l'ingénieur, 1992. ,
The Use of a Spreadsheet Program to Design Motors on a Personnal Computer, IEEE Transaction on Industry Applications, vol.23, issue.3, pp.520-525, 1987. ,
Lumped parameter thermal model for electrical machines of TEFC design, IEE Proceedings B Electric Power Applications, vol.138, issue.5, pp.205-218, 1991. ,
DOI : 10.1049/ip-b.1991.0025
Optimisation program for large-induction-motor design, Proceedings of the Institution of Electrical Engineers, vol.122, issue.6, pp.643-646, 1975. ,
DOI : 10.1049/piee.1975.0174
Point de contact: E_mail@osl fr.ibm.com, FAX: 49-28-08-60, pp.40-41 ,
Comparaison des schémas équivalents au moteur asynchrone polyphasé, pp.1-6, 1967. ,
Extensions to subroutine VFO2AD, System Modeling and Optimization, pp.529-538, 1982. ,
DOI : 10.1007/BFb0006176
On the quadratic programming algorithm of Goldfarb and Idnani, Mathematical Programming Study, vol.25, pp.46-61, 1985. ,
DOI : 10.1007/BFb0121074
Analytically modelling of a small slotless electronicallycommutated neodymium-magnet motor, pp.45-51, 1994. ,
Optimization of polyphase induction motor design -a nonlinear programming approach, IEEE Transactions on Power Apparatus and Systems, issue.2, pp.570-578, 1971. ,
A Comparative Study of Minimization Techniques for Optimization of Induction Motor Design, IEEE Transactions on Power Apparatus and Systems, vol.92, issue.5, pp.1448-1454, 1973. ,
DOI : 10.1109/TPAS.1973.293688
Utilisation d'un algorithme génétique en vue du dimensionnement d'une machine électrique, Institut National Polytechnique de Grenoble, 1995. ,
Logiciel de simulation Analogique SPICE 5, Editions DUNOD, vol.30, 1994. ,
EFFECT OF SKEWING ON THE COGGING TORQUE IN INDUCTION MACHINES, Electric Machines & Power Systems, vol.6, issue.8, pp.545-555, 1994. ,
DOI : 10.1080/07313569408955586
Optimisation en Electromagnétisme par application conjointe des Méthodes de Programmation Non linéaire et de la Méthode des Eléments Finis, 1988. ,
An Algebraic Constraint System for Computer-Aided Design in Magnetics, thesis, 1988. ,
Practical considerations in the optimisation of induction motor design, IEE Proceedings B Electric Power Applications, vol.139, issue.4, 1992. ,
DOI : 10.1049/ip-b.1992.0043
The Alternating Current Induction Motor, Transactions of the American Institute of Electrical Engineers, vol.XIV, issue.1, pp.185-217 ,
DOI : 10.1109/T-AIEE.1897.5570186
Effective resistance and reactance of a solid cylindrical conductor placed in a semi-closed slot, Proceedings of the IEE Part C: Monographs, vol.109, issue.16, pp.611-615, 1962. ,
DOI : 10.1049/pi-c.1962.0079
Effective resistance and reactance of a rectangular conductor placed in a semi-closed slot, Proceedings of the Institution of Electrical Engineers, vol.110, issue.9, pp.1656-1662, 1963. ,
DOI : 10.1049/piee.1963.0235
Systèmes experts pour la conception de moteurs asynchrones, Institut National Polytechnique de Grenoble, 1988. ,
Modélisation du processus de conception des machines électriques, Thèse de docteur, 1991. ,
Utilizing genetic algorithms for the optimal design of electromagnetic devices, IEEE Transactions on Magnetics, vol.30, issue.6, pp.4296-4298, 1994. ,
DOI : 10.1109/20.334066
Induction Machinery Design being Revolutionized by the Digital Computer, AIEE Transactions, Power Apparatus and systems, vol.75, pp.1509-1517, 1956. ,
Synthesis of Induction Motor Designs on a Digital Computer"; AIEE Transactions, Power Apparatus and systems, pp.12-18, 1960. ,
Nonlinear Optimization Techniques for the Design of Static Converters, Proceedings of IMACS'TC1'93, Ecole Polytechnique de Montréal, pp.543-547, 1993. ,
A System for doing Mathematics by Computers, second Edition ,
A Methodology and a Tool for the Computer Aided Design with Constraints of Electrical DevicesA Few Results for Using Genetic Algorithms in the Design of Electrical Machines, the Seventh Biennal Conference on Electromagnetic Field ComputationCEFC'96), 1995. ,