Une méthode de pseudo-concentration pour la simulation 3D volumique du remplissage de moules d'injection. Revue Européenne des Eléments Finis, pp.695-724, 1999. ,
The implications of fiber compaction and saturation on fully coupled VARTM simulation, Composites Part A: Applied Science and Manufacturing, vol.35, issue.2, pp.159-169, 2004. ,
DOI : 10.1016/j.compositesa.2003.02.001
A numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces, International Journal for numerical methods in fluids, vol.19, pp.575-603, 1994. ,
Bubble free resin for infusion process, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, pp.739-746, 2005. ,
DOI : 10.1016/j.compositesa.2004.10.030
Autoclave resin infusion process : analysis and prediction of resin content, S.A.M.P.E. Quarterly, vol.21, issue.2, pp.3-10, 1990. ,
Recent Developments and Open Problems in Composites Materials Manufacturing, Progress in Industrial Mathematics, pp.475-487, 2002. ,
DOI : 10.1007/978-3-662-04784-2_64
Resin flow monitoring in resin film infusion process, Journal of Materials Processing Technology, vol.143, issue.144, pp.143-144687, 2003. ,
DOI : 10.1016/S0924-0136(03)00338-8
A stable finite element for the stokes equations, Estratto da Calcolo, pp.337-344, 1984. ,
DOI : 10.1007/BF02576171
Introduction to composite materials design, 1998. ,
Multigrid for higher order discontinuous galerkin finite elements applied to groundwater flow, 2000. ,
Dhatt : Modélisation des structures parélementsparélements finis, Hermes, 1990. ,
Dynamics of Fluids in Porous Media, Soil Science, vol.120, issue.2, 1990. ,
DOI : 10.1097/00010694-197508000-00022
Adaptive mesh generation for mould filling problems in resin transfer moulding, Composites Part A: Applied Science and Manufacturing, vol.34, issue.9, pp.813-834, 2003. ,
DOI : 10.1016/S1359-835X(03)00199-4
Influence of fibre distribution on the transverse flow permeability in fibre bundles, Composites Science and Technology, vol.63, issue.14, pp.2069-2079, 2003. ,
DOI : 10.1016/S0266-3538(03)00112-X
Modelling of permeability of textile reinforcements: lattice Boltzmann method, Composites Science and Technology, vol.64, issue.7-8, pp.1069-1080, 2004. ,
DOI : 10.1016/j.compscitech.2003.09.015
Nonlinear finite elements for continua and structures, 2000. ,
Structured extended finite element methods for solids defined by implicit surfaces, International Journal for Numerical Methods in Engineering, vol.78, issue.1-2, pp.609-635, 2003. ,
DOI : 10.1002/nme.686
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.2.5786
Simulation numérique des transferts thermiques. Hermès -LavoisieréditionLavoisierédition, 2004. ,
Contribution of numerical simulation to the analysis of heat treatment and surface hardening processes, Heat Treat 98, 18th ASM Heat Treating Society Conference and Exposition, pp.681-690, 1998. ,
Matériaux composites : Comportement mécanique et analyse des structures, Tec & Doc Lavoisier, 2005. ,
The viscoelastic compression behavior of liquid composite molding preforms, Composites Part A: Applied Science and Manufacturing, vol.34, issue.5, pp.431-444, 2003. ,
DOI : 10.1016/S1359-835X(03)00088-5
Simulation tridimensionnelle du remplissage de corps minces par injection ,
URL : https://hal.archives-ouvertes.fr/tel-00275305
Computational tools for the optimal design of the injection moulding process, Journal of Materials Processing Technology, vol.122, issue.1, pp.112-126, 2002. ,
DOI : 10.1016/S0924-0136(01)01248-1
Unidirectional infiltration in deformable porous media: mathematical modeling and self-similar solution, Quarterly of Applied Mathematics, vol.58, issue.1, pp.85-101, 2000. ,
DOI : 10.1090/qam/1738559
The interactions between flows occurring inside and outside fabric tows during rtm, Composites Science and Technology, vol.57, issue.5, pp.587-596, 1997. ,
DOI : 10.1016/S0266-3538(97)00019-5
General Theory of Three???Dimensional Consolidation, Journal of Applied Physics, vol.12, issue.2, pp.155-164, 1941. ,
DOI : 10.1063/1.1712886
URL : https://hal.archives-ouvertes.fr/hal-01368635
Transport phenomena, 2002. ,
Microstructure et perméabilité d'un composite unidirectionneì a fibres longues. Relation entre porosité et constante de Kozeny, pp.413-419, 2005. ,
DOI : 10.3166/rcma.15.371-383
Curing simulation by autoclave resin infusion, Composites Science and Technology, vol.59, issue.16, pp.2297-2313, 1999. ,
DOI : 10.1016/S0266-3538(99)00084-6
Simulations of flow through open cell metal foams using an idealized periodic cell structure, International Journal of Heat and Fluid Flow, vol.24, issue.6, pp.825-834, 2003. ,
DOI : 10.1016/j.ijheatfluidflow.2003.08.002
Cam-Clay plasticity. Part V: A mathematical framework for three-phase deformation and strain localization analyses of partially saturated porous media, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.48-51, pp.5301-5338, 2004. ,
DOI : 10.1016/j.cma.2003.12.067
Study of permeability by periodic and self-consistent homogenisation, European Journal of Mechanics - A/Solids, vol.19, issue.4, pp.603-632, 2000. ,
DOI : 10.1016/S0997-7538(00)00174-1
URL : https://hal.archives-ouvertes.fr/hal-00943756
A standard characterization of saturated ans unsaturated flow behaviors in porous media, 12th International Conference on Composite Materials ICCM12, 1999. ,
Analysis of dynamic flows through porous media. Part II: Deformation of a double-scale fibrous reinforcement, Polymer Composites, vol.327, issue.11, pp.409-421, 2004. ,
DOI : 10.1002/pc.10039
A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particules. Applied science research, pp.27-34, 1947. ,
Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.32, issue.1-3, pp.199-259, 1982. ,
DOI : 10.1016/0045-7825(82)90071-8
Vacuum injection moulding for large structural applications, Composites Part A: Applied Science and Manufacturing, vol.34, issue.6, pp.551-558, 2003. ,
DOI : 10.1016/S1359-835X(03)00060-5
The Convergence of a Class of Double-rank Minimization Algorithms 1. General Considerations, IMA Journal of Applied Mathematics, vol.6, issue.1, pp.76-90, 1970. ,
DOI : 10.1093/imamat/6.1.76
Mesure de la perm??abilit?? spatiale d'un renfort tridimensionnel pour mat??riaux composites ?? matrice polym??re, The European Physical Journal Applied Physics, vol.1, issue.2, pp.269-278, 1998. ,
DOI : 10.1051/epjap:1998145
Compression flow permeability measurement: a continuous technique, Composites Part A: Applied Science and Manufacturing, vol.34, issue.5, pp.445-457, 2003. ,
DOI : 10.1016/S1359-835X(03)00090-3
Etude d'un modèle mécanique et thermophysico-chimique pour la mise en oeuvre de matéraiux composites par infusion, Revue des Composites et des Matériaux Avancés, pp.413-419, 2005. ,
Conception d'une structure travaillante en matériaux composites etétudeetétude de ses liaisons, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 1998. ,
Modélisation du contact : nouvelles approches numériques, Thèse de doctorat, 2002. ,
Papathanasiou : On the variability of the Kozeny constant for saturated flow across unidirectional disordered fiber arrays, Selected Contributions from the 7th International Conference on Flow Processes in Composite Materials, pp.37836-846, 2006. ,
Three-dimensional finite element simulation of curing of polymer composites. Finite Elements in Analysis and Design, pp.895-912, 2004. ,
Mécanique des milieux continus : cours et exercices corrigés. Dunod, 2001. ,
Advani : Analysis of the vacuum infusion moulding process : I. Analytical formulation, Composites Part A : Applied Science and Manufacturing, issue.12, pp.361645-1656, 2005. ,
Les fontaines publiques de la ville de Dijon, p.1856 ,
Simulation of LCM processes involving induced or forced deformations, Composites Part A: Applied Science and Manufacturing, vol.37, issue.6, 2005. ,
DOI : 10.1016/j.compositesa.2005.04.005
Solution to filling time prediction issues for constant pressure driven injection in RTM, Composites Part A: Applied Science and Manufacturing, vol.36, issue.3, pp.339-344, 2005. ,
DOI : 10.1016/j.compositesa.2004.07.001
Experimental analysis and simulation of flow through multi-layer fiber reinforcements in liquid composite molding, Polymer Composites, vol.4, issue.3, pp.246-256, 1998. ,
DOI : 10.1002/pc.10097
Modaressi : Simulation of non isothermal low pressure infiltration processing, 12th International Conference on Composite Materials ICCM12, 1999. ,
Characterization of transient through-thickness permeabilities of Non Crimp New Concept (NC2) multiaxial fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, pp.877-892, 2005. ,
DOI : 10.1016/j.compositesa.2005.01.002
URL : https://hal.archives-ouvertes.fr/emse-00447464
Influence of the stitching density on the transverse permeability of non-crimped new concept (NC2) multiaxial reinforcements: measurements and predictions, Composites Science and Technology, vol.62, issue.15, pp.1979-1991, 2002. ,
DOI : 10.1016/S0266-3538(02)00127-6
URL : https://hal.archives-ouvertes.fr/emse-00563475
Finite element investigation of the interlaminar shear strength of non-crimp fabric based composites, Composites Science and Technology, vol.59, issue.16, pp.2351-2362, 1999. ,
Caractérisation de la perméabilité transverse de nouveaux renforts multiaxiaux cousus pour composites structuraux, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2004. ,
A new scheme for the optimum design of stiffened composite panels with geometric imperfections, 40th Structures, Structural Dynamics, and Materials Conference and Exhibit, 1998. ,
DOI : 10.2514/6.1999-1257
Infiltration of a polymerizing resin in a deformable preform for fiber reinforced composites, Applied and Industrial Mathematics, pp.259-271, 2000. ,
Infiltration Processes in Composite Materials Manufacturing: Modeling and Qualitative Results, Birkhauser, ´ editeur : Complex Flows in Industrial Processes, pp.281-306, 2000. ,
DOI : 10.1007/978-1-4612-1348-2_9
Non-isothermal injection molding with resin cure and preform deformability, Composites Part A: Applied Science and Manufacturing, vol.31, issue.12, pp.311355-1372, 2000. ,
DOI : 10.1016/S1359-835X(00)00040-3
Concurrent methods for permeability measurement in resin transfer molding, Polymer Composites, vol.5, issue.1, pp.149-158, 1996. ,
DOI : 10.1002/pc.10600
Modélisation numérique du soudage par friction malaxage (Friction Stir Welding) Thèse de doctorat, 2005. ,
A new approach to variable metric algorithms, The Computer Journal, vol.13, issue.3, pp.317-322, 1970. ,
DOI : 10.1093/comjnl/13.3.317
URL : http://comjnl.oxfordjournals.org/cgi/content/short/13/3/317
A numerical formulation to solve the ALE Navier-Stokes equations applied to the withdrawal of magma chambers, Thèse de doctorat, 2000. ,
Numerical solution of transport equations with applications to non-newtonian fluids, Trends in Applications of Mathematics to Mechanics Pitman Monographs and Surveys in Pure and Applied Mathematics 77, pp.311-322, 1995. ,
Maillages : Applications auxélémentsauxéléments finis, Hermes Sciences Publicat, 1999. ,
A fixed mesh numerical method for modelling the flow in liquid composites moulding processes using a volume of fluid technique, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.7-8, pp.877-893, 2003. ,
DOI : 10.1016/S0045-7825(02)00604-7
URL : https://hal.archives-ouvertes.fr/hal-00020741
Schrefler : Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation, Computer Methods in Applied Mechanics and Engineering, vol.192, pp.13-141731, 2003. ,
Modelling, simulation and experimental assessment of hygrothermoelastic behaviour of composite laminated plates, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint Etienne, 2004. ,
A family of variable-metric methods derived by variational means, Mathematics of Computation, vol.24, issue.109, pp.23-26, 1970. ,
DOI : 10.1090/S0025-5718-1970-0258249-6
Thermodynamic approach to effective stress in partially saturated porous media, European Journal of Mechanics - A/Solids, vol.20, issue.4, pp.521-538, 2001. ,
DOI : 10.1016/S0997-7538(01)01158-5
Incompressible Flow and the Finite Element Method : Advection-Diffusion, 2000. ,
Optimization of Composite Structures by Estimation of Distribution Algorithms, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint Etienne, 2004. ,
Consolidation Experiments for Laminate Composites, Journal of Composite Materials, vol.160, issue.6, pp.650-669, 1987. ,
DOI : 10.1177/002199838702100705
Modeling the edge effect in liquid composites molding, Composites Part A : Applied Science and Manufacturing, vol.29, issue.A, pp.603-609, 1998. ,
Resin film infusion of stitched stiffened composite panels, Composites Part A: Applied Science and Manufacturing, vol.34, issue.3, pp.227-236, 2003. ,
DOI : 10.1016/S1359-835X(03)00002-2
General conservation equations for multi-phase systems: 1. Averaging procedure, Flow through Porous Media, pp.1-16, 1983. ,
DOI : 10.1016/0309-1708(79)90025-3
General conservation equations for multi-phase systems: 2. Mass, momenta, energy, and entropy equations, G.F. Pinder, ´ editeur : Flow through Porous Media, pp.17-29, 1983. ,
DOI : 10.1016/0309-1708(79)90035-6
General conservation equations for multi-phase systems: 3. Constitutive theory for porous media flow, G.F. Pinder, ´ editeur : Flow through Porous Media, pp.30-45, 1983. ,
DOI : 10.1016/0309-1708(80)90016-0
Modélisation thermomécanique de la coulée continue d'acier en deux dimensions, Thèse de doctorat, 2003. ,
Etude du comportement en cyclage hygrothermique d'un matériau compositécomposité epais, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2004. ,
Contact Mechanics, 2004. ,
Mass conservation in numerical simulation of resin flow, Composites Part A: Applied Science and Manufacturing, vol.31, issue.10, pp.311061-1068, 2000. ,
DOI : 10.1016/S1359-835X(00)00067-1
Simulation of resin film infusion process using finite element / nodal control volume approach, Advanced composites Letters, vol.8, issue.3, pp.101-104, 1999. ,
Simulation of the manufacturing of an ambulance roof by vacuum assisted resin infusion (VARI). Composites 2002 Convention and Trade Show, Composites Fabricators Association, 2002. ,
On the Roughness-Induced Effective Boundary Conditions for an Incompressible Viscous Flow, Journal of Differential Equations, vol.170, issue.1, pp.96-122, 2001. ,
DOI : 10.1006/jdeq.2000.3814
Analysis of resin transfer moulding process with controlled multiple gates resin injection, Composites Part A: Applied Science and Manufacturing, vol.31, issue.5, pp.31407-422, 2000. ,
DOI : 10.1016/S1359-835X(99)00086-X
A flow-front refinement technique for the numerical simulation of the resin-transfer molding process, Composites Science and Technology, vol.59, issue.11, pp.1663-1674, 1999. ,
DOI : 10.1016/S0266-3538(99)00029-9
Analysis of vacuum bag resin transfer molding process, Composites Part A: Applied Science and Manufacturing, vol.32, issue.11, pp.1553-1560, 2001. ,
DOI : 10.1016/S1359-835X(01)00012-4
Principles of heat Tranfer in Porous Media, 1995. ,
Viscoelastic response of dry and wet fibrous materials during infusion processes, and Manufacturing Selected Contributions from the 7th International Conference on Flow Processes in Composite Materials, pp.37868-873, 2006. ,
DOI : 10.1016/j.compositesa.2005.02.008
A unified approach to manufacturing simulation for composites, Proceedings of the First Korea-U.S. Workshop on Composite Materials, 1998. ,
Akkerman : Fully 2.5d flow modeling of resin infusion under flexible tooling using unstructured meshes and wet and dry compaction properties, Composites Part A : Applied Science and Manufacturing, 2006. ,
Thermoplastic film infusion process for long-fiber reinforced composites using thermally expandable elastomer tools, Composites Part A: Applied Science and Manufacturing, vol.34, issue.7, pp.673-680, 2003. ,
DOI : 10.1016/S1359-835X(03)00122-2
Coupling Fluid Flow with Porous Media Flow, SIAM Journal on Numerical Analysis, vol.40, issue.6, pp.2195-2218, 2003. ,
DOI : 10.1137/S0036142901392766
Analysis and minimization of void formation during resin transfer molding process, Composites Science and Technology, vol.66, issue.16, 2006. ,
DOI : 10.1016/j.compscitech.2005.07.008
A finite element analysis of multiphase immiscible flow in deforming porous media for subsurface systems, Communications in Numerical Methods in Engineering, vol.5, issue.3, pp.135-149, 1998. ,
DOI : 10.1002/(SICI)1099-0887(199802)14:2<135::AID-CNM134>3.0.CO;2-J
Lee : Modeling of void formation during Resin Transfer Moulding, 12th International Conference on Composite Materials ICCM12, 1999. ,
An analysis of the three-dimensional resin-transfer mold filling process, Composites Science and Technology, vol.60, issue.7, pp.961-975, 2000. ,
DOI : 10.1016/S0266-3538(99)00160-8
Huh : A finite element simulation of resin transfer molding based on partial nodal saturation and implicit time integration, Composites Part A : Applied Science and Manufacturing, vol.29, pp.5-6541, 1998. ,
A process simulation model for the manufacture of a blade-stiffened panel by the resin film infusion process, Composites Science and Technology, vol.56, issue.3, pp.273-289, 1996. ,
DOI : 10.1016/0266-3538(96)80008-X
A Three-Dimensional Model of the Resin Film Infusion Process, Journal of Composite Materials, vol.51, issue.2, pp.1255-1273, 2002. ,
DOI : 10.1177/0021998302036010168
A closed form solution to describe infusion of resin under vacuum in deformable fibrous porous media, Modelling and Simulation in Materials Science and Engineering, vol.12, issue.3, pp.191-204, 2004. ,
DOI : 10.1088/0965-0393/12/3/S09
A stabilized mixed finite element method for Darcy flow, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.39-40, pp.39-404341, 2002. ,
DOI : 10.1016/S0045-7825(02)00371-7
Infiltration processing of fibre reinforced composites: governing phenomena, Composites Part A: Applied Science and Manufacturing, vol.32, issue.8, pp.981-996, 2001. ,
DOI : 10.1016/S1359-835X(01)00015-X
Compression des renforts dans les procédés LCM 1, Analyse mécanique et microstructurale. Revue des Composites et des Matériaux Avancés, pp.243-263, 2002. ,
Rigal : Présentation des matériaux composites, 1991. ,
Microscale permeability predictions of porous fibrous media, International Journal of Heat and Mass Transfer, vol.44, issue.16, pp.3135-3145, 2001. ,
DOI : 10.1016/S0017-9310(00)00335-5
Conception d'un montage de mesure de perméabilité de renforts de matériaux composites, 2005. ,
Spatial Tessellations : Concepts and Applications of Voronoi Diagrams, 2000. ,
A numerical simulation of the resin film infusion process, Composite Structures, vol.60, issue.4, pp.431-437, 2003. ,
DOI : 10.1016/S0263-8223(03)00021-7
MINI-Element et factorisationsincompì etes pour la parallélisation d'un solveur de Stokes 2D, 2000. ,
Optimal Selection of the Bubble Function in the Stabilization of the P1-P1 Element for the Stokes Problem, SIAM Journal on Numerical Analysis, vol.32, issue.4, pp.1201-1224, 1995. ,
DOI : 10.1137/0732056
On Darcy's law for growing porous media, International Journal of Non-Linear Mechanics, vol.37, issue.3, pp.485-491, 2002. ,
DOI : 10.1016/S0020-7462(01)00022-1
Infiltration of initially dry, deformable porous media, International Journal of Multiphase Flow, vol.22, issue.6, pp.1205-1222, 1996. ,
DOI : 10.1016/0301-9322(96)00035-3
A resin film infusion process for manufacture of advanced composite structures, Composite Structures, vol.47, issue.1-4, pp.471-476, 1999. ,
DOI : 10.1016/S0263-8223(00)00025-8
Développement d'un modèlé eléments finis pour la simulation d'´ ecoulementsà ecoulementsà surface libre : application au soudage, Thèse de doctorat, 2003. ,
Deville : Traité des matériaux -Tome 10 -Modélisation numérique en science et génie des matériaux, 1998. ,
Gartling : The Finite Element Method in Heat Transfer and Fluid Dynamics, 2001. ,
Locally Conservative Coupling of Stokes and Darcy Flows, SIAM Journal on Numerical Analysis, vol.42, issue.5, pp.1959-1977, 2005. ,
DOI : 10.1137/S0036142903427640
Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites, Composites Science and Technology, vol.66, issue.3-4, 2005. ,
DOI : 10.1016/j.compscitech.2005.06.013
Dynamic fundamental solutions for compressible and incompressible modeled poroelastic continua, International Journal of Solids and Structures, vol.41, issue.15, pp.4047-4073, 2004. ,
DOI : 10.1016/j.ijsolstr.2004.02.059
Computer modelling in environmental geomechanics, Computers & Structures, vol.79, issue.22-25, pp.22-252209, 2001. ,
DOI : 10.1016/S0045-7949(01)00076-1
A fully coupled dynamic model for two-phase fluid flow in deformable porous media, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.24-25, pp.24-253223, 2001. ,
DOI : 10.1016/S0045-7825(00)00390-X
Mathematical model of stress formation during vacuum resin infusion process, Composites Part B: Engineering, vol.30, issue.5, pp.513-521, 1999. ,
DOI : 10.1016/S1359-8368(99)00012-8
Conditioning of quasi-Newton methods for function minimization, Mathematics of Computation, vol.24, issue.111, pp.647-656, 1970. ,
DOI : 10.1090/S0025-5718-1970-0274029-X
Simulation of the three-dimensional non-isothermal mold filling process in resin transfer molding, Composites Science and Technology, vol.63, issue.13, pp.1931-1948, 2003. ,
DOI : 10.1016/S0266-3538(03)00161-1
Partition of unity-based discontinuous elements for interface phenomena: computational issues, Communications in Numerical Methods in Engineering, vol.2, issue.1-2, pp.465-478, 2003. ,
DOI : 10.1002/cnm.688
New Remeshing Applications in Resin Transfer Molding, Journal of Reinforced Plastics and Composites, vol.24, issue.15, pp.1629-1653, 2005. ,
DOI : 10.1177/0731684405050404
Modeling void formation dynamics in fibrous porous media with the lattice Boltzmann method, Composites Part A: Applied Science and Manufacturing, vol.29, issue.7, pp.749-755, 1998. ,
DOI : 10.1016/S1359-835X(98)00031-1
Effect of processing conditions and material properties on the debond fracture toughness of foam-core sandwich composites: process model development, Composites Part A: Applied Science and Manufacturing, vol.34, issue.11, pp.1085-1095, 2003. ,
DOI : 10.1016/S1359-835X(03)00200-8
Le langage C++. Pearson Education, 2003. ,
Terada : Homogenization method to predict three-dimensional permeabilities considering micro-macro and solid-fluid interactions, 2000. ,
A numerical solution of the Navier-Stokes equations using the finite element technique, Computers & Fluids, vol.1, issue.1, pp.73-100, 1973. ,
DOI : 10.1016/0045-7930(73)90027-3
Soil Mechanics in Engineering Practice, 1967. ,
Theory of Elasticity 3rd edition, 1969. ,
Functional Requirements of a Simulation Software for Liquid Molding Processes, Science and Engineering of Composite Materials, vol.6, issue.4, pp.209-218, 1997. ,
DOI : 10.1515/SECM.1997.6.4.209
Advanced numerical simulation of liquid composite molding for process analysis and optimization, Composites Part A : Applied Science and Manufacturing Selected Contributions from the 7th International Conference on Flow Processes in Composite Materials, pp.37890-902, 2006. ,
DOI : 10.1016/j.compositesa.2005.06.003
CapteursàCapteursà fibres optiques pour le contôle de l'´ elaboration et la caractérisation mécanique des matéraiux composites, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2004. ,
Dynamic capillary effects in liquid composite moulding with non-crimp fabrics, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.92-102, 2006. ,
DOI : 10.1016/j.compositesa.2005.04.011
Stabilized finite element methods for coupled geomechanics and multiphase flow, Thèse de doctorat, 2003. ,
Formulation and study of thermal???mechanical coupling for saturated porous media, Computers & Structures, vol.81, issue.8-11, pp.8-111019, 2003. ,
DOI : 10.1016/S0045-7949(02)00476-5
Resin Infusion under Flexible Tooling (RIFT): a review, Composites Part A: Applied Science and Manufacturing, vol.27, issue.7, pp.517-524, 1996. ,
DOI : 10.1016/1359-835X(96)00008-5
Viscosité. Les techniques de l'ingénieur, R2350, 1994. ,
Muggeridge : Flow of water through channels filled with elastically-deformable polymer gels, European Conference on the Mathematics of Oil Recovery, p.8, 2000. ,
Gradient-dependent plasticity model and dynamic strain localisation analysis of saturated and partially saturated porous media: one dimensional model, European Journal of Mechanics - A/Solids, vol.19, issue.3, pp.503-524, 2000. ,
DOI : 10.1016/S0997-7538(00)00177-7
Forhad : A general method for simulation of fluid flows with moving and compliant boundaries on unstructured grids, Computer Methods in Applied Mechanics and Engineering, vol.192, pp.39-404439, 2003. ,
The Finite Element Method, Vols 1-3, 2000. ,