T. Abbasi and S. A. Abbasi, Dust explosions???Cases, causes, consequences, and control, Journal of Hazardous Materials, vol.140, issue.1-2, pp.7-44, 2007.
DOI : 10.1016/j.jhazmat.2006.11.007

A. I. Abdel-hadi, O. I. Zhupanska, and N. D. Cristecu, Mechanical properties of microcrystalline cellulose, Mechanics of Materials, vol.34, issue.7, pp.373-399, 2002.
DOI : 10.1016/S0167-6636(02)00157-6

D. R. Ballal, Ignition and Flame Quenching of Quiescent Dust Clouds of Solid Fuels, Proceedings of the Royal Society, pp.479-500, 1980.
DOI : 10.1098/rspa.1980.0012

W. Bartknecht, Explosion ? Course, prevention and protection, 1980.

A. L. Berlad and V. Tangirala, Particle Segregation Effects on the Combustion Safety of Dust-Containing Systems, Progress in Astronautics and Aeronautics, pp.59-72, 1989.

N. A. Bhimte and P. T. Tayade, Evaluation of microcrystalline cellulose prepared from sisal fibers as a tablet excipient: A technical note, AAPS PharmSciTech, vol.8, issue.1, 2007.
DOI : 10.1208/pt0801008

J. P. Boris, A. M. Landsberg, E. S. Oran, and J. H. Gardner, LCPFCT ? Flux-Corrected Transport algorithm for solving generalized continuity equations, Naval Research Laboratory Report, pp.6410-93, 1993.

A. A. Borisov, B. E. Gel-'fand, E. I. Timofeev, S. A. Tsyganov, and S. V. Khomic, Ignition of Dust Suspensions Behind Shock Waves, Progress in Astronautics and Aeronautics, pp.332-339, 1983.

A. R. Boyle and F. J. Llewellyn, The electrostatic ignitibility of dust clouds and powders, Journal of the Society of Chemical Industry, vol.66, issue.1, pp.173-181, 1950.
DOI : 10.1002/jctb.5000690604

O. Bozier, Contribution à l'Etude des Caractéristiques de Combustion Isochore d'une Suspension de Particules Solides Réactives. Génération de la Suspension, 2004.

A. Briand, Contribution à l'étude de la structure des détonations dans les milieux biphasiques, Thèse de Docteur de l'ENSMA, Laboratoire de Combustion et Détonique, 2009.

S. Callé, L. Klaba, D. Thomas, L. Perrin, and O. Dufaud, Influence of the size distribution and concentration on wood dust explosion: Experiments and reaction modelling, Powder Technology, vol.157, issue.1-3, pp.144-148, 2005.
DOI : 10.1016/j.powtec.2005.05.021

G. Calvert, M. Ghadiri, and R. Tweedie, Aerodynamic dispersion of cohesive powders: A review of understanding and technology, Advanced Powder Technology, vol.20, issue.1, pp.4-16, 2009.
DOI : 10.1016/j.apt.2008.09.001

J. A. Campos, L. Lemos, J. Borges, and A. R. , Flame Characteristics of Pine and Corn Dust Suspensions, Progress in Astronautics and Aeronautics, pp.26-42, 1987.

P. Cardillo, Some historical accidental explosions, Journal of Loss Prevention in the Process Industries, vol.14, issue.1, pp.69-76, 2001.
DOI : 10.1016/S0950-4230(00)00011-5

K. L. Cashdollar, Coal dust explosibility, Journal of Loss Prevention in the Process Industries, vol.9, issue.1, pp.65-76, 1996.
DOI : 10.1016/0950-4230(95)00050-X

K. L. Cashdollar, Overview of dust explosibility characteristics, Journal of Loss Prevention in the Process Industries, vol.13, issue.3-5, pp.183-199, 2000.
DOI : 10.1016/S0950-4230(99)00039-X

K. S. Choi, M. Yamaguma, T. Kodama, J. H. Joung, and M. Takeuchi, Characteristics of the vibrating-mesh minimum ignition energy testing apparatus for dust clouds, Journal of Loss Prevention in the Process Industries, pp.443-447, 2001.
DOI : 10.1016/S0950-4230(01)00032-8

G. M. Colver, S. W. Kim, and Y. , An electrostatic suspension method for testing spark breakdown, ignition, and quenching of powders, Journal of Electrostatics, vol.37, issue.3, pp.151-172, 1996.
DOI : 10.1016/0304-3886(96)00008-3

G. Continillo, S. Crescitelli, E. Fumo, F. Napolitano, and G. Russo, Coal dust explosions in a spherical bomb, Journal of Loss Prevention in the Process Industries, pp.223-229, 1991.
DOI : 10.1016/0950-4230(91)85004-D

C. Couhert, Pyrolyse flash à haute température de la biomasse ligno-cellulosique et de ses composés ? production de gaz de synthèse, 2007.

H. Cui and J. R. Grace, Pneumatic conveying of biomass particles: a review, China Particuology, vol.4, issue.3-4, pp.3-4, 2006.
DOI : 10.1016/S1672-2515(07)60259-0

A. E. Dahoe, R. S. Cant, and B. Scarlett, On the decay of turbulence in the 20-liter explosion sphere, Flow, Turbulence and Combustion, pp.159-184, 2001.

D. Benedetto, A. Russo, and P. , Thermo-kinetic modeling of dust explosions, Journal of Loss Prevention in the Process Industries, pp.303-309, 2007.

D. Blasi and C. , Modeling chemical and physical processes of wood and biomass pyrolysis, Progress in Energy and Combustion Science, pp.47-90, 2008.

R. K. Eckhoff, Prevention and mitigation of dust explosions in the process industries: A survey of recent research and development, Journal of Loss Prevention in the Process Industries, pp.3-20, 1996.
DOI : 10.1016/0950-4230(95)00044-5

R. K. Eckhoff, Understanding dust explosions. The role of powder science and technology, Journal of Loss Prevention in the Process Industries, pp.105-116, 2009.

R. K. Eckhoff, K. Fuhre, and G. H. Pedersen, Dust explosion experiments in a vented 236 m3 silo cell, Journal of Occupational Accidents, vol.9, issue.3, pp.161-175, 1987.
DOI : 10.1016/0376-6349(87)90010-1

M. El-sakhawy and M. L. Hassan, Physical and mechanical properties of microcrystalline cellulose prepared from agricultural residues, Carbohydrate Polymers, vol.67, issue.1, pp.1-10, 2007.
DOI : 10.1016/j.carbpol.2006.04.009

T. E. Gill, T. M. Zobeck, and J. E. Stout, Technologies for laboratory generation of dust from geological materials, Journal of Hazardous Materials, vol.132, issue.1, pp.1-13, 2006.
DOI : 10.1016/j.jhazmat.2005.11.083

G. Gmurczyk and R. Klemens, Effect of Nonuniform Coal Particle Distribution on Combustion Aerodynamics, Progress in Astronautics and Aeronautics, pp.102-111, 1987.

J. E. Going, K. Chatrathi, and K. L. Cashdollar, Flammability limit measurements for dusts in 20-L and 1-m3 vessels, Journal of Loss Prevention in the Process Industries, pp.209-219, 2000.
DOI : 10.1016/S0950-4230(99)00043-1

S. Goroshin, M. Bidabadi, and J. H. Lee, Quenching distance of laminar flame in aluminum dust clouds, Combustion and Flame, vol.105, issue.1-2, pp.147-160, 1996.
DOI : 10.1016/0010-2180(95)00183-2

T. Grotkjaer, K. Dam-johansen, A. D. Jensen, and P. Glarnorg, An experimental study of biomass ignition???, Fuel, vol.82, issue.7, pp.825-833, 2003.
DOI : 10.1016/S0016-2361(02)00369-1

F. Guedira, A. Bennouna, P. Magne, and D. Masson, Etude comparative de la pyrolyse de déchets agro-alimentaires (tourteaux d'olives et bagasse) et de bois : effet de la pression sur les rendements, 1991.

I. Hartmann, J. Nagy, and H. R. Brown, Inflammability and explosibility of metal powder, US Bureau of Mines, RI, vol.3772, 1943.

A. K. Hayashi, M. Matsuda, and T. Fujiwara, Numerical Study on Gas-Solid Two-Phase Nozzle and Jet Flow, Progress in Astronautics and Aeronautics, pp.124-135, 1989.

P. Hedenus, M. S. Mattsson, G. A. Niklasson, O. Camber, and R. Ek, Characterisation of instantaneous water absorption properties of pharmaceutical excipients, International Journal of Pharmaceutics, vol.202, issue.1-2, pp.141-149, 2000.
DOI : 10.1016/S0378-5173(00)00436-1

M. Hertzberg, R. S. Conti, and K. L. Cashdollar, Spark ignition energies for dust-air mixtures: Temperature and concentration dependences, th International Symposium on Combustion, 1984.
DOI : 10.1016/S0082-0784(85)80664-0

J. B. Heywood, Internal combustion engine fundamentals, 1988.

T. Iijima and T. Takeno, Effects of temperature and pressure on burning velocity, Combustion and Flame, vol.65, issue.1, pp.35-43, 1986.
DOI : 10.1016/0010-2180(86)90070-2

J. Jarosinski, J. H. Lee, R. Knystautas, and J. D. Crowley, Quenching of dust-air flames, International Symposium on Combustion, pp.1-1917, 1988.
DOI : 10.1016/S0082-0784(88)80428-4

J. Jarosinski, Y. Pu, E. M. Bulewicz, C. W. Kauffman, and V. G. Johnson, Some fundamental characteristics of cornstarch dust-air flames, Progress in Astronautics and Aeronautics, pp.119-135, 1991.

O. Kalejaiye, P. R. Amyotte, M. J. Pegg, and K. L. Cashdollar, Effectiveness of dust dispersion in the 20-L Siwek chamber, Journal of Loss Prevention in the Process Industries, pp.46-59, 2010.
DOI : 10.1016/j.jlp.2009.05.008

C. W. Kauffman, M. Sichel, and P. Wolanski, Research on dust explosions at the University of Michigan, Powder Technology, vol.71, issue.2, pp.119-134, 1992.
DOI : 10.1016/0032-5910(92)80002-E

B. A. Khasainov, Final Report " Modeling particle combustion in detonations and explosions, Laboratoire de Combustion et de Détonique, 2005.

B. A. Khasainov and B. Veyssiere, Initiation of detonation regimes in hybrid two-phase mixtures, Shock Waves, vol.20, issue.1, pp.9-15, 1996.
DOI : 10.1007/BF02511399

B. Khasainov, A. Kuhl, and S. Victorov, Equilibrium-chemistry model for multiphase reactive premixed and nonpremixed flows, th International Colloquium on the Dynamics of Explosions and Reactive Systems, 2005.

O. Korhonen, S. Pohja, S. Peltonen, E. Suihko, M. Vidgren et al., Effects of physical properties for starch acetate powders on tableting, AAPS PharmSciTech, vol.3, issue.4, 2002.
DOI : 10.1208/pt030434

J. H. Lee, The detonation phenomenon, 2008.
DOI : 10.1017/CBO9780511754708

J. H. Lee, F. Zhang, and R. Knystautas, Propagation mechanisms of combustion waves in dust-air mixtures, Powder Technology, vol.71, issue.2, pp.153-162, 1992.
DOI : 10.1016/0032-5910(92)80004-G

R. S. Lee, D. F. Aldis, D. W. Garrett, and F. S. Lai, Improved diagnostics for determination of minimum explosive concentration, ignition energy and ignition temperature of dusts, Powder Technology, vol.31, issue.1, pp.51-62, 1982.
DOI : 10.1016/0032-5910(82)80004-1

L. Lemos and R. Bouriannes, Starch Dust Combustion Characteristics in a Closed Spherical Vessel, Progress in Astronautics and Aeronautics, pp.93-106, 1989.

T. Mani, P. Murugan, J. Abedi, and N. Mahinpey, Pyrolysis of wheat straw in a thermogravimetric analyzer: Effect of particle size and heating rate on devolatilization and estimation of global kinetics, Chemical Engineering Research and Design, vol.88, issue.8, pp.952-958, 2010.
DOI : 10.1016/j.cherd.2010.02.008

D. B. Mercer, P. R. Amyotte, D. J. Dupuis, M. J. Pegg, A. Dahoe et al., The influence of injector design on the decay of pre-ignition turbulence in a spherical explosion chamber, Journal of Loss Prevention in the Process Industries, pp.269-282, 2001.
DOI : 10.1016/S0950-4230(00)00051-6

I. Milosavjevic and E. M. Suuberg, Cellulose decomposition kinetics ? Global kinetics for fuels processing and fire modeling applications, Preprint of the American Chemical ociety Division of Energy and Fuels, p.3, 1994.

I. Milosavjevic and E. M. Suuberg, Cellulose Thermal Decomposition Kinetics: Global Mass Loss Kinetics, Industrial & Engineering Chemistry Research, vol.34, issue.4, pp.1081-1091, 1995.
DOI : 10.1021/ie00043a009

K. J. Mintz, Problems in experimental measurements of dust explosions, Journal of Hazardous Materials, vol.42, issue.2, pp.177-186, 1995.
DOI : 10.1016/0304-3894(95)00011-I

C. Morozzo, Account of a violent explosion which happened in a flour warehouse at Turin, Le Répertoire des Arts et Manufactures, pp.416-432, 1795.

M. A. Nettleton, Influence of Turbulence on Flammability Limits of Dust Clouds, Progress in Astronautics and Aeronautics, pp.87-101, 1987.

M. Nifuku, T. Matsuda, and H. Enomoto, Recent development of standardization of testing methods for dust explosion in Japan, Journal of Loss Prevention in the Process Industries, pp.243-251, 2000.
DOI : 10.1016/S0950-4230(99)00049-2

R. I. Nigmatulin, Methods of mechanics of a continuous medium for the description of multiphase mixtures, Journal of Applied Mathematics and Mechanics, vol.34, issue.6, pp.1033-1049, 1970.
DOI : 10.1016/0021-8928(70)90167-X

A. Norberg, D. Xu, and D. Zhang, Powder Ignition Energy Measured Utilizing a New fluidized Bed Ignition Chamber, 1988.

Y. Okuyama, Y. Ohtomo, K. Maruta, H. Kobayashi, and T. Niioka, An experimental study on particle-cloud flames in a microgravity field, 26th Symposium (International) on Combustion, pp.1369-1375, 1996.
DOI : 10.1016/S0082-0784(96)80356-0

E. S. Oran and J. P. Boris, Numerical Simulation of Reactive Flow, 1987.
DOI : 10.1017/CBO9780511574474

K. N. Palmer and R. N. Butlin, Dust explosibility tests and their application, Powder Technology, vol.6, issue.3, pp.149-157, 1972.
DOI : 10.1016/0032-5910(72)80071-8

S. J. Parker, Electric Spark Ignition of Gases and Dusts, 1985.

O. Péraldi, Caractéristiques des détonations dans les mélanges gazeux contenant de l'amidon en suspension, 1985.

O. Péraldi and B. Veyssiere, Experimental study of detonations in starch particle suspensions with O 2, Progress in Astronautics and Aeronautics, pp.490-504, 1986.

H. M. Perks and J. F. Liebman, Paradigms and Paradoxes : Estimation of the Enthalpies of Formation of Some Common, Solid-Phase Compounds of Considerable Theoretical Importance, Structural Chemistry, vol.11, issue.5, pp.325-329, 2000.
DOI : 10.1023/A:1009242427659

B. Piriou, G. Vaitilingom, B. Veyssiere, B. Cuq, and X. Rouau, Potential direct use of solid biomass in internal combustion engines, Progress in Energy and Combustion Science, 2012.
DOI : 10.1016/j.pecs.2012.08.001

URL : https://hal.archives-ouvertes.fr/hal-01268208

J. Piskorz, D. Radlein, and D. S. Scott, On the mechanism of the rapid pyrolysis of cellulose, Journal of Analytical and Applied Pyrolysis, vol.9, issue.2, pp.121-137, 1986.
DOI : 10.1016/0165-2370(86)85003-3

C. Proust and B. Veyssière, New Experimental Apparatus for Studying the Propagation of Dust-Air Flames, Progress in Astronautics and Aeronautics, pp.43-61, 1987.

C. Proust, Flame propagation and combustion in some dust-air mixtures, Journal of Loss Prevention in the Process Industries, pp.89-100, 2006.
DOI : 10.1016/j.jlp.2005.06.026

URL : https://hal.archives-ouvertes.fr/ineris-00962989

Y. Pu, J. Podfilipski, and J. Jarosinski, Constant volume combustion of aluminium and cornstarch dust in microgravity, Combustion Science and Technology, vol.35, pp.255-267, 1998.

Y. Pu, Fundamental Characteristics of Laminar Flame in Cornstarch Dust-Air Mixture, Progress in Astronautics and Aeronautics, pp.3-25, 1987.

Y. Pu, F. Jia, S. F. Wang, and T. Skjold, Determination of the maximum effective burning velocity of dust???air mixtures in constant volume combustion, Journal of Loss Prevention in the Process Industries, vol.20, issue.4-6, pp.462-469, 2007.
DOI : 10.1016/j.jlp.2007.04.036

Y. Pu, Y. Li, C. W. Kauffman, and L. P. Bernal, Determination of Turbulence Parameters in Closed Explosion Vessels, Progress in Astronautics and Aeronautics, pp.107-123, 1989.

Y. Rhim, D. Zhang, M. Rooney, D. C. Nagle, D. H. Fairbrother et al., Changes in the thermophysical properties of microcrystalline cellulose as function of carbonization temperature, Carbon, vol.48, issue.1, pp.31-40, 2009.
DOI : 10.1016/j.carbon.2009.07.048

Y. I. Rubtsov, A. I. Kazakov, L. P. Andrienko, and G. B. Manelis, Kinetics of heat release during decomposition of cellulose, Combustion, Explosion, and Shock Waves, pp.6-710, 1993.

A. D. Rychkov, Modeling the process of methane-air plume extinguishing by a solidpropellant pulse aerosol generator, Combustion, Explosion, and Shock Waves, pp.3-258, 2009.

X. Shuangning, L. Zhihe, L. Baoming, Y. Weiming, and B. Xueyuan, Devolatilization characteristics of biomass at flash heating rate, Fuel, vol.85, issue.5-6, pp.664-670, 2006.
DOI : 10.1016/j.fuel.2005.08.044

R. Siwek, Determination of technical safety indices and factors influencing hazard evaluation of dusts, Journal of Loss Prevention in the Process Industries, pp.1-21, 1996.
DOI : 10.1016/0950-4230(95)00057-7

T. Skjold, B. J. Arntzen, O. R. Hansen, O. J. Taraldset, I. E. Strovik et al., Simulating Dust Explosions with the First Version of DESC, Process Safety and Environmental Protection, vol.83, issue.2, pp.151-160, 2005.
DOI : 10.1205/psep.04237

J. L. Soh, L. Yang, C. V. Liew, F. D. Cui, and P. W. Heng, Importance of small pores in microcrystalline cellulose for controlling water distribution during extrusionspheronization, AAPS PharmSciTech, vol.9, p.3, 2008.

J. Sun, R. Dobashi, and T. Hirano, Structure of flames propagating through metal particle clouds and behavior of particles, th International Symposium on Combustion, pp.2405-2411, 1998.
DOI : 10.1016/S0082-0784(98)80092-1

P. B. Vainshtein and R. I. Nigmatulin, Combustion of gas mixtures with particles, traduction du Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, pp.19-33, 1971.

J. E. Venart, Flixborough: A final footnote, Journal of Loss Prevention in the Process Industries, pp.621-643, 2007.
DOI : 10.1016/j.jlp.2007.05.009

B. Veyssiere, Structure of the detonations in gaseous mixtures containing aluminium particles in suspension, Progress of Astronautics and Aeronautics, pp.522-544, 1986.

B. Veyssiere, P. Arfi, and B. A. Khasainov, Detonation of starch suspensions in gaseous O 2, Combustion and Flame, vol.2, issue.117, pp.3-477, 1999.

S. B. Victorov and S. A. Gubin, The use of the system of thermodynamic calculations TDS for modelling of chemical and physical processes, Russian Conference " New Materials and Technologies NMT-98, Book Company, 1998.

S. B. Victorov, S. A. Gubin, I. V. Maklashova, and I. I. Revyakin, Thermodynamic TDS code: Application to detonation properties of condensed explosives, Proceedings of the 32 nd International Annual Conference of ICT, Energetic Materials, Ignition, Combustion and Detonation, pp.69-70, 2001.

E. P. Volkov and N. Y. Kudryavtsev, Modeling of nitrogen oxide formation in a turbulent diffuse flame, traduction de Inzhenerno-Fizicheskii Zhurnal, pp.6-885, 1989.

P. Wolanski, Deflagration and Detonation Combustion of Dust Mixtures, Progress in Astronautics and Aeronautics, pp.3-31, 1989.

P. Wolanski, D. Lee, M. Sichel, C. W. Kauffman, and J. A. Nicholls, The Structure of Dust Detonations, Progress in Astronautics and Aeronautics, pp.241-263, 1983.

R. Zeitoun, Procédés de fractionnement de la matière végétale ? Application à la production des polysaccharides du son et de la paille de blé, 2011.