. Fig, 12 ? Dessin de la machine de transfert obtenue

A. Agnetis, A. Ciancimino, M. Lucertini, and M. Pizzichella, Balancing flexible lines for car components assembly, International Journal of Production Research, vol.3, issue.4, pp.333-350, 1995.
DOI : 10.1080/00207549508930152

K. A?gpaka?gpak and H. Gökçen, Assembly line balancing: Two resource constrained cases, International Journal of Production Economics, vol.96, issue.1, pp.129-140, 2005.
DOI : 10.1016/j.ijpe.2004.03.008

P. K. Agrawal, The related activity concept in assembly line balancing, International Journal of Production Research, vol.9, issue.3, pp.403-421, 1985.
DOI : 10.1080/00207548508904717

M. Amen, An exact method for cost-oriented assembly line balancing, International Journal of Production Economics, vol.64, issue.1-3, pp.187-195, 2000.
DOI : 10.1016/S0925-5273(99)00057-2

M. Amen, Heuristic methods for cost-oriented assembly line balancing: A survey, International Journal of Production Economics, vol.68, issue.1, pp.1-14, 2000.
DOI : 10.1016/S0925-5273(99)00095-X

M. Amen, Heuristic methods for cost-oriented assembly line balancing: A comparison on solution quality and computing time, International Journal of Production Economics, vol.69, issue.3, pp.255-264, 2001.
DOI : 10.1016/S0925-5273(99)00096-1

M. Amen, Cost-oriented assembly line balancing: Model formulations, solution difficulty, upper and lower bounds, European Journal of Operational Research, vol.168, issue.3, pp.747-770, 2006.
DOI : 10.1016/j.ejor.2004.07.026

P. E. Amiolemhen, A. O. Et, and . Ibhadode, Application of genetic algorithms???determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.1403-1412, 2004.
DOI : 10.1016/j.ijmachtools.2004.02.001

E. J. Anderson, M. C. Et, and . Ferris, Genetic Algorithms for Combinatorial Optimization: The Assemble Line Balancing Problem, ORSA Journal on Computing, vol.6, issue.2, pp.161-173, 1994.
DOI : 10.1287/ijoc.6.2.161

C. Andres, C. Miralles, and R. Pastor, Balancing and scheduling tasks in assembly lines with sequence-dependent setup times, European Journal of Operational Research, vol.187, issue.3, 2006.
DOI : 10.1016/j.ejor.2006.07.044

N. Anwer, Méthodologie d'analyse de raisonnement pour la génération automatique des gammes d'usinage en fraisage. ContributionàContribution`Contributionà la caractérisation des entités par analyse des contraintes d'usinabilité, Thèse de doctorat. Ecole Normale Supérieure de Cachan, 2000.

A. L. Arcus, A COMPUTER METHOD OF SEQUENCING OPERATIONS FOR ASSEMBLY LINES, International Journal of Production Research, vol.6, issue.4, pp.259-277, 1966.
DOI : 10.1287/mnsc.2.3.261

R. G. Askin, M. Et, and . Zhou, A parallel station heuristic for the mixed-model production line balancing problem, International Journal of Production Research, vol.35, issue.11, pp.3095-3105, 1997.
DOI : 10.1080/002075497194309

B. Bard and J. F. , Assembly line balancing with parallel workstations and dead time, International Journal of Production Research, vol.8, issue.6, pp.1005-1018, 1989.
DOI : 10.1287/mnsc.30.1.85

J. J. Bartholdi, Balancing two-sided assembly lines: a case study, International Journal of Production Research, vol.31, issue.10, pp.2447-2461, 1993.
DOI : 10.1016/0167-6377(82)90046-3

J. Bautista, J. Et, and . Pereira, Ant Algorithms for Assembly Line Balancing, Lecture Notes in Computer Science, vol.2463, pp.65-75, 2002.
DOI : 10.1007/3-540-45724-0_6

J. Bautista, J. Et, and . Pereira, Ant algorithms for a time and space constrained assembly line balancing problem, European Journal of Operational Research, vol.177, issue.3, pp.2016-2032, 2007.
DOI : 10.1016/j.ejor.2005.12.017

J. Bautista, R. Suarez, M. Mateo, and R. Companys, Local search heuristics for the assembly line balancing problem with incompatibilities between tasks, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), pp.2404-2409, 2000.
DOI : 10.1109/ROBOT.2000.846387

I. Baybars, A Survey of Exact Algorithms for the Simple Assembly Line Balancing Problem, Management Science, vol.32, issue.8, pp.909-932, 1986.
DOI : 10.1287/mnsc.32.8.909

A. Baykasoglu and L. Ozbakir, Stochastic U-line balancing using genetic algorithms, The International Journal of Advanced Manufacturing Technology, vol.4, issue.4, 2006.
DOI : 10.1007/s00170-005-0322-4

C. Becker, A. Et, and . Scholl, A survey on problems and methods in generalized assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.694-715, 2006.
DOI : 10.1016/j.ejor.2004.07.023

S. Belmokhtar, Lignes d'usinage avecéquipementsavecéquipements standard: modélisation, configuration et optimisation, Thèse de doctorat. ´ Ecole Nationale, 2006.

S. Belmokhtar, A. Bratcu, and A. Dolgui, Modular machining line design and reconfiguration: some optimization methods. Manufacturing the Future: Concepts- Technologies-Visions, pp.125-152, 2006.
DOI : 10.5772/5047

URL : https://hal.archives-ouvertes.fr/emse-00675849

S. Belmokhtar, A. Dolgui, N. Guschinsky, and G. Levin, Integer programming models for logical layout design of modular machining lines, Computers & Industrial Engineering, vol.51, issue.3, pp.502-518, 2006.
DOI : 10.1016/j.cie.2006.08.010

URL : https://hal.archives-ouvertes.fr/hal-00387641

S. Belmokhtar, A. Dolgui, I. Ignatenko, and X. Delorme, Optimizing modular machining line design problem with mixed activation mode of machining units. Decision Making in Manufacturing and Services, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00387657

A. Bernard, IC2 Productique -Information -Commande -Communication, 2003.

E. J. Bezdek, D. C. Thompson, K. L. Wood, and R. H. Crawford, Volumetric feature recognition for direct engineering, Direct Engineering: Toward Intelligent Manufacturing, pp.15-69, 1999.

T. K. Bhattacharjee, S. Et, and . Sahu, Complexity of single model assembly line balancing problems. Engineering Costs and Production Economics 18, pp.203-214, 1990.

F. Boctor, A Multiple-rule Heuristic for Assembly Line Balancing, Journal of the Operational Research Society, vol.46, issue.1, pp.62-69, 1995.
DOI : 10.1057/jors.1995.7

B. Boucher and T. O. , Choice of assembly line design under task learning, International Journal of Production Research, vol.29, issue.4, pp.513-524, 1987.
DOI : 10.1080/00207547508943015

N. Boysen, M. Et, and . Fliedner, A versatile algorithm for assembly line balancing, European Journal of Operational Research, vol.184, issue.1, 2006.
DOI : 10.1016/j.ejor.2006.11.006

N. Boysen, M. Fliedner, and A. Scholl, A classification of assembly line balancing problems, European Journal of Operational Research, vol.183, issue.2, 2006.
DOI : 10.1016/j.ejor.2006.10.010

J. P. Brans, B. Et, and . Marechal, The PROMCALC & GAIA decision support system for multicriteria decision aid, Decision Support Systems, vol.12, issue.4-5, pp.297-310, 1994.
DOI : 10.1016/0167-9236(94)90048-5

D. Brissaud, Système de conception automatique de gammes d'usinage pour les industriesmanufacturì eres, Thèse de doctorat, 1992.

J. Brown, Digital Manufacturing. The PLM Approach to better Manufacturing Processes, 2004.

J. Bukchin, A comparative study of performance measures for throughput of a mixed model assembly line in a JIT environment, International Journal of Production Research, vol.36, issue.10, pp.2669-2685, 1998.
DOI : 10.1080/002075498192427

J. Bukchin, E. M. Dar-el, and J. Rubinovitz, Mixed model assembly line design in a make-to-order environment, Computers & Industrial Engineering, vol.41, issue.4, pp.405-421, 2002.
DOI : 10.1016/S0360-8352(01)00065-1

J. Bukchin, J. Et, and . Rubinovitz, A weighted approach for assembly line design with station paralleling and equipment selection, IIE Transactions, vol.8, issue.1, pp.513-524, 2002.
DOI : 10.1080/00207548908942531

J. Bukchin, M. Et, and . Tzur, Design of flexible assembly line to minimize equipment cost, IIE Transactions, vol.32, issue.7, pp.585-598, 2000.
DOI : 10.1287/mnsc.34.2.240

Y. Bukchin, I. Et, and . Rabinowitch, A branch-and-bound based solution approach for the mixed-model assembly line-balancing problem for minimizing stations and task duplication costs, European Journal of Operational Research, vol.174, issue.1, pp.492-508, 2006.
DOI : 10.1016/j.ejor.2005.01.055

G. M. Buxey, Assembly Line Balancing with Multiple Stations, Management Science, vol.20, issue.6, pp.1010-1021, 1974.
DOI : 10.1287/mnsc.20.6.1010

G. M. Buxey, N. D. Slack, and R. Wild, Production Flow Line System Design???A Review, A I I E Transactions, vol.18, issue.1, pp.37-48, 1973.
DOI : 10.1080/05695557308974880

L. Capacho, R. Et, and . Pastor, ASALBP: the alternative subgraphs assembly line balancing problem, International Journal of Production Research, vol.32, issue.13, 2005.
DOI : 10.1016/0167-6377(82)90046-3

URL : https://hal.archives-ouvertes.fr/hal-00512975

L. Capacho, R. Et, and . Pastor, The ASALB Problem with Processing Alternatives Involving Different Tasks: Definition, Formalization and Resolution, International Conference on Computational Science and its Applications Lecture Notes in Computer Science, vol.3982, pp.554-563, 2006.
DOI : 10.1007/11751595_59

L. Capacho, O. Guschinskaya, A. Dolgui, and R. Pastor, An evaluation study of approximate methods for a line balancing problem with assembly alternatives, Proceedings of the 8th International Conference on the Modern Information Technology in the Industrial Enterprises, pp.199-204, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00387721

L. Capacho, O. Guschinskaya, A. Dolgui, and R. Pastor, Heuristic Methods to Solve the Alternative Subgraphs Assembly Line Balancing Problem, 2006 IEEE International Conference on Automation Science and Engineering, pp.513-518, 2006.
DOI : 10.1109/COASE.2006.326932

URL : https://hal.archives-ouvertes.fr/hal-00387720

L. Capacho, R. Pastor, A. Dolgui, and O. Guschinskaya, An evaluation of constructive heuristic methods to solve the alternative subgraphs assembly line balancing problem, Journal of Heuristics, 2007.

R. L. Carraway, A Dynamic Programming Approach to Stochastic Assembly Line Balancing, Management Science, vol.35, issue.4, pp.459-471, 1989.
DOI : 10.1287/mnsc.35.4.459

A. K. Chakravarty, Line Balancing With Task Learning Effects, IIE Transactions, vol.3, issue.2, pp.186-193, 1988.
DOI : 10.1111/j.1540-5915.1979.tb00026.x

K. C. Chan, P. C. Hui, K. W. Yeung, and F. S. Ng, Handling the assembly line balancing problem in the clothing industry using a genetic algorithm, International Journal of Clothing Science and Technology, vol.10, issue.1, pp.21-37, 1998.
DOI : 10.1108/09556229810205240

R. Chen, K. Lu, and S. Yu, A hybrid genetic algorithm approach on multi-objective of assembly planning problem, Engineering Applications of Artificial Intelligence, vol.15, issue.5, pp.447-457, 2002.
DOI : 10.1016/S0952-1976(02)00073-8

W. C. Chiang, The application of a tabu search metaheuristic to the assembly line balancing problem, Annals of Operations Research, vol.77, pp.209-227, 1998.
DOI : 10.1023/A:1018925411397

W. M. Chow and . Ed, Assembly line design: methodology and applications, 1990.

Y. Cohen, M. E. Et, and . Dar, Optimizing the number of stations in assembly lines under learning for limited production, Production Planning & Control, vol.9, issue.3, pp.230-240, 1998.
DOI : 10.1080/095372898234208

C. Sandvik, Main catalogue, 2006.

C. Sandvik, Main catalogue, 2007.

A. Corominas and R. , Balancing assembly line with skilled and unskilled workers. OMEGA The International Journal of Management Science, Pastor et J. Plans, 2007.
DOI : 10.1016/j.omega.2006.03.003

URL : http://hdl.handle.net/2117/6075

F. Cus, The inclusion of the geometrical shape of the cutter into the optimisation of the milling process, International Journal of Advanced Manufacturing Technology, vol.16, pp.392-403, 2000.

M. Cutkosky, J. M. Tenenbaum, and D. Muller, Features in process based design, Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, pp.557-562, 1988.

A. Dagnino, Integrated Architecture for Assembly Planning in an Electronics Manufacturing Environment, Integrated Manufacturing Systems, vol.5, issue.4/5, pp.77-86, 1994.
DOI : 10.1108/09576069410815774

A. I. Dashchenko, Manufacturing Technologies for Machines of the Future 21st Century, 2003.

B. Dashchenko and A. I. Ed, Technologies for motor-car construction, 2005.

A. I. Dashchenko and . Ed, Reconfigurable Manufacturing Systems and Transformable Factories, 2006.
DOI : 10.1007/3-540-29397-3

K. M. Decker, The Monte Carlo method in science and engineering: Theory and application, Computer Methods in Applied Mechanics and Engineering, vol.89, issue.1-3, pp.463-483, 1991.
DOI : 10.1016/0045-7825(91)90054-A

R. F. Deckro, Balancing Cycle Time and Workstations, IIE Transactions, vol.3, issue.2, pp.106-111, 1989.
DOI : 10.1287/opre.27.6.1128

X. Delorme, Modélisation et résolution deprobì emes liésliés`liésà l'exploitation d'infrastructures ferroviaires, Thèse de doctorat, 2003.

D. Deneux and . Ed, Méthodes et modèles pour la conception concourante. HabilitationàHabilitation`Habilitationà Diriger des Recherches, 2002.

T. Dereli, I. H. Filiz, and A. Baykasoglu, Optimizing cutting parameters in process planning of prismatic parts by using genetic algorithms, International Journal of Production Research, vol.39, issue.15, pp.3303-3328, 2001.
DOI : 10.1007/BF01748633

W. Derigent, Méthodologie de passage d'un modèle CAO vers un modèle FAO pour despì eces aéronautiques : Prototype logiciel dans le cadre du projet USIQUICK, Thèse de doctorat, 2005.

C. Derras, Formalisation de l'imprécision informationnelle et des incertitudes décisionnelles des connaissances expertes pour la génération de processus de fabrication, Thèse de doctorat, 1998.

S. G. Dimitriadis, Assembly line balancing and group working: A heuristic procedure for workers??? groups operating on the same product and workstation, Computers & Operations Research, vol.33, issue.9, pp.2757-2774, 2006.
DOI : 10.1016/j.cor.2005.02.027

A. Dolgui, B. Finel, O. Guschinskaya, N. Guschinsky, G. Levin et al., Balancing large-scale machining lines with multi-spindle heads using decomposition, International Journal of Production Research, vol.114, issue.18-19, pp.18-19, 2006.
DOI : 10.1080/002075499191003

URL : https://hal.archives-ouvertes.fr/hal-00512895

A. Dolgui, B. Finel, N. Guschinsky, G. Levin, and F. Vernadat, A heuristic approach for transfer lines balancing, Journal of Intelligent Manufacturing, vol.114, issue.3, pp.159-171, 2005.
DOI : 10.1007/s10845-004-5886-6

URL : https://hal.archives-ouvertes.fr/hal-00387630

A. Dolgui, B. Finel, N. Guschinsky, G. Levin, and F. Vernadat, MIP approach to balancing transfer lines with blocks of parallel operations, IIE Transactions, vol.36, issue.10, pp.869-882, 2006.
DOI : 10.1287/mnsc.32.4.430

URL : https://hal.archives-ouvertes.fr/hal-00387642

A. Dolgui and J. M. Proth, Les systèmes de production modernes, 2006.

A. Dolgui, O. Guschinskaya, N. Guschinsky, and G. Levin, Conception de syst??mes de fabrication : prototype d'un logiciel d'aide ?? la d??cision, Journal of Decision Systems, vol.129, issue.4, pp.489-516, 2005.
DOI : 10.1287/mnsc.32.4.430

A. Dolgui, O. Guschinskaya, N. Guschinsky, and G. Levin, Machine Tools Engineering " : Integrated decision support system for the logical layout design of unit head machines, Proceedings of the International Conference on Global Manufacturing and Innovation, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00387724

A. Dolgui, O. Guschinskaya, N. Guschinsky, and G. Levin, Optimization in design of unit head machines with a mobil table Information Control Problems, Manufacturing 2006 : A Proceedings volume from the 12th IFAC International Symposium, pp.413-418, 2006.

A. Dolgui, O. Guschinskaya, N. Guschinsky, and G. Levin, Decision making and support tools for design of machining systems. Encyclopedia of Decision Making and, 2007.
URL : https://hal.archives-ouvertes.fr/emse-00673095

A. Dolgui, N. Guschinsky, and G. Levin, On Problem of Optimal Design of Tranfer Lines with Parallel and Sequential Operation, Proceedings of the 7th IEEE International Conference on Emerging Technologies and Factor Automation (J.M. Fuertes, 1999.

A. Dolgui, N. Guschinsky, and G. Levin, A special case of transfer lines balancing by graph approach, European Journal of Operational Research, vol.168, issue.3, pp.732-746, 2006.
DOI : 10.1016/j.ejor.2004.07.025

URL : https://hal.archives-ouvertes.fr/hal-00387645

A. Dolgui, N. Guschinsky, and G. Levin, Exact and heuristic algorithms for balancing transfer lines when a set of available spindle heads is given. International Transactions in Operational Research, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00387673

A. Dolgui and I. Ihnatsenka, Branch and bound algorithm for a transfer line design problem: Stations with sequentially activated multi-spindle heads, European Journal of Operational Research, vol.197, issue.3, 2007.
DOI : 10.1016/j.ejor.2008.03.028

URL : https://hal.archives-ouvertes.fr/emse-00676013

A. Dolgui, N. Guschinsky, G. Levin, and J. M. Proth, Optimisation of multi-position machines and transfer lines, European Journal of Operational Research, vol.185, issue.3, pp.1375-1389, 2008.
DOI : 10.1016/j.ejor.2006.03.069

URL : https://hal.archives-ouvertes.fr/hal-00387679

J. Driscoll, D. Et, and . Thilakawardana, The definition of assembly line balancing difficulty and evaluation of balance solution quality, Robotics and Computer-Integrated Manufacturing, vol.17, issue.1-2, pp.81-86, 2001.
DOI : 10.1016/S0736-5845(00)00040-5

F. Easton, B. Faaland, T. D. Klastorin, and T. Schmitt, Improved network based algorithms for the assembly line balancing problem, International Journal of Production Research, vol.13, issue.11, 1901.
DOI : 10.1287/mnsc.30.1.85

E. Erel and H. Gökcen, Shortest-route formulation of mixed-model assembly line balancing problem, European Journal of Operational Research, vol.116, issue.1, pp.194-204, 1999.
DOI : 10.1016/S0377-2217(98)00115-5

E. Erel, S. C. Et, and . Sarin, A survey of the assembly line balancing procedures, Production Planning & Control, vol.9, issue.5, pp.414-434, 1998.
DOI : 10.1080/095372898233902

T. A. Feo and M. G. Resende, A probabilistic heuristic for a computationally difficult set covering problem, Operations Research Letters, vol.8, issue.2, pp.67-71, 1989.
DOI : 10.1016/0167-6377(89)90002-3

P. Festa, M. G. Et, and . Resende, GRASP, pp.325-367, 2001.
DOI : 10.1007/978-3-319-07153-4_23-1

B. Finel, Structuration de lignes d'usinage : méthodes exactes et heuristiques, Thèse de doctorat, 2004.

B. Finel, A. Dolgui, and F. Vernadat, A random search and backtracking procedure for transfer line balancing, International Journal of Computer Integrated Manufacturing, vol.32, issue.4, 2006.
DOI : 10.1016/S1367-5788(02)00027-5

URL : https://hal.archives-ouvertes.fr/hal-00387677

B. Fleszar, K. Et, and K. S. Hindi, An enumerative heuristic and reduction methods for the assembly line balancing problem, European Journal of Operational Research, vol.145, issue.3, pp.606-620, 2003.
DOI : 10.1016/S0377-2217(02)00204-7

R. Gadidov, W. Et, and . Wilhelm, A cutting plane approach for the single-product assembly system design problem, International Journal of Production Research, vol.38, issue.8, pp.1731-1754, 2000.
DOI : 10.1080/002075400188564

B. Garro, Conception d'´ eléments physiques de systèmes de production, Thèse de doctorat, 1992.

R. Geelink, Flexible Definition of Form Features, Thèse de doctorat, 1996.
DOI : 10.1007/978-0-387-34981-7_46

W. V. Gehrlein and J. H. Patterson, Balancing Single Model Assembly Lines: Comments on A Paper by E. M. Dar-El (Mansoor), A I I E Transactions, vol.2, issue.3, pp.109-112, 1978.
DOI : 10.1080/05695557808975191

S. Ghosh, R. Et, and . Gagnon, A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems, International Journal of Production Research, vol.18, issue.8, pp.637-670, 1989.
DOI : 10.1080/00207548908942574

H. Gökçen, K. Et, and . A?gpaka?gpak, A goal programming approach to simple U-line balancing problem, European Journal of Operational Research, vol.171, issue.2, pp.577-585, 2006.
DOI : 10.1016/j.ejor.2004.09.021

S. C. Graves, B. W. Et, and . Lamar, An Integer Programming Procedure for Assembly System Design Problems, Operations Research, vol.31, issue.3, pp.522-545, 1983.
DOI : 10.1287/opre.31.3.522

S. C. Graves, C. S. Et, and . Redfield, Equipment selection and task assignment for multiproduct assembly system design, International Journal of Flexible Manufacturing Systems, vol.16, issue.No. 6, pp.31-50, 1988.
DOI : 10.1007/BF00713158

M. Grieves, Product Lifecycle Management: Driving the Next Generation of Lean Thinking, 2005.

G. Groupe, La gamme automatique en usinage. Editions Hermès, 1990.

O. Guschinskaya, A. Dolgui, N. Guschinsky, and G. Levin, A combined heuristic approach for optimization of a class of machining lines, IEEE International Conference on Automation Science and Engineering, 2005., pp.154-159, 2005.
DOI : 10.1109/COASE.2005.1506761

URL : https://hal.archives-ouvertes.fr/hal-00387694

O. Guschinskaya, A. Dolgui, N. Guschinsky, and G. Levin, A heuristic multi-start decomposition approach for optimal design of serial machining lines, European Journal of Operational Research, vol.189, issue.3, pp.902-913, 2008.
DOI : 10.1016/j.ejor.2006.03.072

URL : https://hal.archives-ouvertes.fr/hal-00387681

O. Guschinskaya, A. Dolgui, N. Guschinsky, and G. Levin, New reduction methods for the transfer line balancing problem. Preprints of IMS' 2007: IFAC Workshop On Intelligent Manufacturing Systems, pp.75-80, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00387744

O. Guschinskaya, A. Dolgui, N. Guschinsky, and G. Levin, A scheduling problem for multi-spindle head machines with a mobile table. Computers and Operations Research, 2007.

O. Guschinskaya, A. Et, and . Dolgui, A comparative evaluation of exact and heuristic methods for transfer lines balancing problem. Information Control Problems, Manufacturing 2006 : A Proceedings volume from the 12th IFAC International Symposium, pp.395-400, 2006.

B. Guschinskaya, O. Et, and A. Dolgui, Balancing transfer lines with multi-spindles machines using GRASP. Preprints of the 4th IFAC conference on Management and Control in Manufacturing and Logistics, pp.225-226, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00387741

O. Guschinskaya, A. Et, and . Dolgui, A comprehensive comparative analysis of exact and heuristic methods for transfer line balancing problems, International Journal of Production Economics, 2007.

O. Guschinskaya, A. Et, and . Dolgui, Heuristic methods for a transfer line balancing problem, Proceedings of the 19th International Conference on Production Research (J.A, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00387745

O. Guschinskaya, A. Et, . Dolgui-coro-v-/, and . Roadef, Une méthode exacte pour l'´ equilibrage de lignes d'usinage avec machinesparalì eles et changements d'outils. Livre des résumés, pp.225-226, 2007.
DOI : 10.3166/jesa.44.1079-1117

A. L. Gutjahr, G. L. Et, and . Nemhauser, An Algorithm for the Line Balancing Problem, Management Science, vol.11, issue.2, pp.308-315, 1964.
DOI : 10.1287/mnsc.11.2.308

S. T. Hackman, M. J. Magazine, and T. S. Wee, Fast, Effective Algorithms for Simple Assembly Line Balancing Problems, Operations Research, vol.37, issue.6, pp.916-924, 1989.
DOI : 10.1287/opre.37.6.916

I. Hamza, Z. Bouaziz, and M. Haddar, Optimisation du choix des outils de coupe pour l'usinage des poches quadrilatères en 2D1/2, Proceedings of the 4th International Conference on Integrated Design and Production, p.17, 2005.

J. P. Hart, A. W. Et, and . Shogan, Semi-greedy heuristics: An empirical study, Operations Research Letters, vol.6, issue.3, pp.107-114, 1987.
DOI : 10.1016/0167-6377(87)90021-6

D. W. He, A. Et, and . Kusiak, Designing an assembly line for modular products, Computers & Industrial Engineering, vol.34, issue.1, pp.37-52, 1998.
DOI : 10.1016/S0360-8352(97)00149-6

M. Held, R. M. Karp, and R. Shareshian, Assembly-Line Balancing???Dynamic Programming with Precedence Constraints, Operations Research, vol.11, issue.3, pp.442-459, 1963.
DOI : 10.1287/opre.11.3.442

W. B. Helgeson, D. P. Et, and . Birnie, Assembly line balancing using ranked positional weight technique, Journal of Industrial Engineering, vol.12, pp.394-398, 1961.

T. R. Hoffman, Assembly Line Balancing with a Precedence Matrix, Management Science, vol.9, issue.4, pp.551-562, 1963.
DOI : 10.1287/mnsc.9.4.551

T. R. Hoffman, Eureka: A Hybrid System for Assembly Line Balancing, Management Science, vol.38, issue.1, pp.39-47, 1992.
DOI : 10.1287/mnsc.38.1.39

T. R. Hoffman, Response to Note on Microcomputer Performance of ???FABLE??? on Hoffmann's Data Sets, Management Science, vol.39, issue.10, pp.1192-1193, 1993.
DOI : 10.1287/mnsc.39.10.1192

N. Hop and . Van, A heuristic solution for fuzzy mixed-model line balancing problem, European Journal of Operational Research, vol.168, issue.3, pp.789-810, 2006.
DOI : 10.1016/j.ejor.2004.07.029

E. J. Ignall, A review of assembly line balancing, The Journal of Industrial Engineering, vol.16, pp.244-254, 1965.

B. Inman, R. R. Et, and M. Leon, Scheduling duplicate serial stations in transfer lines, International Journal of Production Research, vol.32, issue.11, pp.2631-2644, 1994.
DOI : 10.1080/00207548908942531

J. R. Jackson, A Computing Procedure for a Line Balancing Problem, Management Science, vol.2, issue.3, pp.261-271, 1956.
DOI : 10.1287/mnsc.2.3.261

P. Jacobe, Génération ascendante de gamme d'usinage : proposition d'une méthode appliquée aux travaux de très grande série utilisant des machinesàmachines`machinesà transfert circulaire, 1992.

J. R. Johnson, Optimally Balancing Large Assembly Lines with ???Fable???, Management Science, vol.34, issue.2, pp.240-253, 1988.
DOI : 10.1287/mnsc.34.2.240

R. V. Johnson, A Branch and Bound Algorithm for Assembly Line Balancing Problems with Formulation Irregularities, Management Science, vol.29, issue.11, pp.1309-1324, 1983.
DOI : 10.1287/mnsc.29.11.1309

R. V. Johnson, Balancing assembly lines for teams and work groups, International Journal of Production Research, vol.8, issue.6, pp.1205-1214, 1991.
DOI : 10.1287/mnsc.32.4.430

E. P. Kao, A Preference Order Dynamic Program for Stochastic Assembly Line Balancing, Management Science, vol.22, issue.10, pp.1097-1104, 1976.
DOI : 10.1287/mnsc.22.10.1097

E. P. Kao, Computational experience with a stochastic assembly line balancing algorithm, Computers & Operations Research, vol.6, issue.2, pp.79-86, 1979.
DOI : 10.1016/0305-0548(79)90019-4

H. Kim, S. Et, and . Park, A strong cutting plane algorithm for the robotic assembly line balancing problem, International Journal of Production Research, vol.12, issue.8, pp.2311-2323, 1995.
DOI : 10.1287/mnsc.32.4.430

Y. J. Kim, Y. K. Kim, and Y. Cho, A heuristic-based genetic algorithm for workload smoothing in assembly lines, Computers & Operations Research, vol.25, issue.2, pp.99-111, 1998.
DOI : 10.1016/S0305-0548(97)00046-4

Y. K. Kim, Y. Kim, and Y. J. Kim, Two-sided assembly line balancing: A genetic algorithm approach, Production Planning & Control, vol.11, issue.1, pp.44-53, 2000.
DOI : 10.1080/095372800232478

Y. K. Kim, Y. J. Kim, and Y. Kim, Genetic algorithm for assembly line balancing problem with various objectives, Computers and Industrial Eginnering, vol.30, issue.3, pp.397-409, 1996.

A. Kimms, Minimal investment budgets for flow line configuration, IIE Transactions, vol.36, issue.4, pp.287-298, 2000.
DOI : 10.1287/mnsc.30.6.713

Y. Koren, U. Heisel, F. Jovane, T. Moriwaki, G. Pritchow et al., Reconfigurable Manufacturing Systems, CIRP Annals - Manufacturing Technology, vol.48, issue.2, pp.527-598, 1999.
DOI : 10.1016/S0007-8506(07)63232-6

S. D. Lapierre, A. B. Ruiz, and P. Soriano, Balancing assembly lines with tabu search, European Journal of Operational Research, vol.168, issue.3, pp.826-837, 2006.
DOI : 10.1016/j.ejor.2004.07.031

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.92.2623

S. D. Lapierre, A. B. Et, and . Ruiz, Balancing assembly lines: an industrial case study, Journal of the Operational Research Society, vol.145, issue.6, pp.589-597, 2004.
DOI : 10.1016/S0377-2217(02)00204-7

H. F. Lee, R. V. Et, and . Johnson, A line-balancing strategy for designing flexible assembly systems, International Journal of Flexible Manufacturing Systems, vol.19, issue.No. 4, pp.91-120, 1991.
DOI : 10.1007/BF00167513

T. O. Lee, Y. Kim, and Y. K. Kim, Two-sided assembly line balancing to maximize work relatedness and slackness, Computers & Industrial Engineering, vol.40, issue.3, pp.273-292, 2001.
DOI : 10.1016/S0360-8352(01)00029-8

A. Lefebvre, J. Renaud, L. Sabourin, and G. Gogu, Modélisation des contraintes de réalisation pour la conception de gammes d'usinage en grande série, pp.433-443, 2001.

Y. Leu, L. A. Matheson, and L. P. Rees, Assembly Line Balancing Using Genetic Algorithms with Heuristic-Generated Initial Populations and Multiple Evaluation Criteria, Decision Sciences, vol.32, issue.4, pp.581-606, 1994.
DOI : 10.1016/0360-8352(79)90004-4

G. Levitin, J. Rubinovitz, and B. Shnits, A genetic algorithm for robotic assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.811-825, 2006.
DOI : 10.1016/j.ejor.2004.07.030

M. Licon, Highly flexible 3-axis machining cell in stand alone configuration, 2007.

G. Little, D. Clark, J. Corney, and J. Tuttle, Delta-volume decomposition for multi-sided components, Computer-Aided Design, vol.30, issue.9, pp.695-706, 1998.
DOI : 10.1016/S0010-4485(98)00023-2

M. Lombard, Contribution de la modélisation informationnelle aux processus de conception et réalisation de produits manufacturiers : vers une ontologie métier. Habilitationàbilitation`bilitationà Diriger des Recherches, 2006.

L. Lossent, ContributionàContribution`Contributionà la conduite d'´ etude de faisabilité de systèmes de fabrication, 1997.

J. L. Macaskill, Production-Line Balances for Mixed-Model Lines, Management Science, vol.19, issue.4-part-1, pp.423-434, 1972.
DOI : 10.1287/mnsc.19.4.423

P. Martin, A. D. 'acunto, J. Arzur, and L. Abt, Intégration produit-process, 2001.

S. Masood, Line balancing and simulation of an automated production transfer line, Assembly Automation, vol.26, issue.1, pp.69-74, 2006.
DOI : 10.1108/01445150610645684

A. A. Mastor, An Experimental Investigation and Comparative Evaluation of Production Line Balancing Techniques, Management Science, vol.16, issue.11, pp.728-746, 1970.
DOI : 10.1287/mnsc.16.11.728

S. Matanachai, C. A. Et, and . Yano, Balancing mixed-model assembly lines to reduce work overload, IIE Transactions, vol.2, issue.1, pp.29-42, 2001.
DOI : 10.1287/mnsc.37.5.572

P. R. Mcmullen, G. V. Et, and . Frazier, A heuristic for solving mixed-model line balancing problems with stochastic task durations and parallel stations, International Journal of Production Economics, vol.51, issue.3, pp.177-190, 1997.
DOI : 10.1016/S0925-5273(97)00048-0

P. R. Mcmullen, G. V. Et, and . Frazier, Using simulated annealing to solve a multiobjective assembly line balancing problem with parallel workstations, International Journal of Production Research, vol.36, issue.10, pp.2717-2741, 1998.
DOI : 10.1080/002075498192454

P. R. Mcmullen, P. Et, and . Tarasewich, Using Ant Techniques to Solve the Assembly Line Balancing Problem, IIE Transactions, vol.35, issue.7, pp.605-617, 2003.
DOI : 10.1080/07408170304354

M. G. Mehrabi, A. G. Ulsoy, and Y. Koren, Reconfigurable manufacturing systems: Key to futur manufacturing, Journal of Intelligent Manufacturing, vol.11, issue.4, pp.403-419, 2000.
DOI : 10.1023/A:1008930403506

M. G. Mehrabi, A. G. Ulsoy, Y. Koren, and P. Heytler, Trends and perspectives in flexible and reconfigurable manufacturing systems, Journal of Intelligent Manufacturing, vol.13, issue.2, pp.135-146, 2002.
DOI : 10.1023/A:1014536330551

C. Merengo, F. Nava, and A. Pozetti, Balancing and sequencing manual mixed-model assembly lines, International Journal of Production Research, vol.37, issue.12, pp.2835-2860, 1999.
DOI : 10.1080/002075499190545

M. G. Miao, N. Sridharan, and J. J. Shah, CAD-CAM integration using machining features, International Journal of Computer Integrated Manufacturing, vol.26, issue.4, pp.296-318, 2002.
DOI : 10.1016/S0010-4485(97)00090-0

J. Miltenburg, Balancing U-lines in a multiple U-line facility, European Journal of Operational Research, vol.109, issue.1, pp.1-23, 1998.
DOI : 10.1016/S0377-2217(97)00169-0

M. Minoux, Programmation mathématique : Théorie et algorithmes. Collection technique et scientifique des télécommunications DUNOD, 1983.

C. Miralles, J. P. García-sabater, C. Andrés, and M. Cardos, Advantages of assembly lines in Sheltered Work Centres for Disabled. A case study, International Journal of Production Economics, vol.110, issue.1-2, 2007.
DOI : 10.1016/j.ijpe.2007.02.023

V. M??nzum??nzu, J. M. Et, and . Henrioud, Stochastic algorithm for tasks assignment in single or mixed model assembly lines, Journal Européen des Systèmes Automatisés, vol.32, pp.7-8, 1998.

C. L. Moodie and H. H. Young, A heuristic method of assembly line balancing for assumptions of constant or variable work element times, Journal of Industrial Engineering, vol.16, issue.1, pp.23-29, 1965.

G. Nicosia, D. Pacciarelli, and A. Pacifici, Optimally balancing assembly lines with different workstations, Discrete Applied Mathematics, vol.118, issue.1-2, pp.99-113, 2002.
DOI : 10.1016/S0166-218X(01)00259-1

URL : http://doi.org/10.1016/s0166-218x(01)00259-1

B. W. Niebel, Mechanized process selection for planning new designs, 1965.

M. M. Nkasu and K. H. Leung, A stochastic approach to assembly line balancing, International Journal of Production Research, vol.3, issue.142, pp.975-991, 1995.
DOI : 10.1080/00207549508930189

H. Paris, ContributionàContribution`Contributionà la conception automatique des gammes d'usinage : le probì eme du posage et du bridage depì eces, Thèse de Doctorat. Université Joseph Four- nier, 1995.

K. Park, S. Park, and W. Kim, A heuristic for an assembly line balancing problem with incompatibility, range, and partial precedence constraints, Computers & Industrial Engineering, vol.32, issue.2, pp.321-332, 1996.
DOI : 10.1016/S0360-8352(96)00301-4

R. Pastor, C. Andres, A. Duran, and M. Perez, Tabu search algorithms for an industrial multi-product and multi-objective assembly line balancing problem, with reduction of the task dispersion, Journal of the Operational Research Society, vol.53, issue.12, pp.1317-1323, 2002.
DOI : 10.1057/palgrave.jors.2601457

R. Pastor, A. Et, and . Corominas, Assembly line balancing with incompatibilities and bounded workstation loads, Ricerca Operativa, vol.30, pp.23-45, 2000.

V. Pateloup, E. Duc, and P. Ray, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.1343-1353, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

J. H. Patterson, J. J. Et, and . Albracht, Technical Note???Assembly-Line Balancing: Zero-One Programming with Fibonacci Search, Operations Research, vol.23, issue.1, pp.166-174, 1975.
DOI : 10.1287/opre.23.1.166

A. Pinnoi and W. E. Wilhelm, A Branch and Cut Approach for Workload Smoothing on Assembly Lines, INFORMS Journal on Computing, vol.9, issue.4, pp.335-280, 1997.
DOI : 10.1287/ijoc.9.4.335

A. Pinnoi and W. E. Wilhelm, Assembly System Design: A Branch and Cut Approach, Management Science, vol.44, issue.1, pp.103-118, 1998.
DOI : 10.1287/mnsc.44.1.103

P. A. Pinto, D. G. Dannenbring, and B. M. Khumawala, Branch and bound and heuristic procedures for assembly line balancing with paralleling of stations, International Journal of Production Research, vol.6, issue.5, pp.565-576, 1981.
DOI : 10.1080/00207548108956687

L. S. Pitsoulis, M. G. Et, and . Resende, Greedy randomized adaptive search procedures, Handbook of Applied Optimization, pp.168-183, 2002.

S. G. Ponnambalam, P. Aravindan, and G. M. Naidu, A comparative evaluation of assembly line balancing Heuristics, The International Journal of Advanced Manufacturing Technology, vol.30, issue.1, pp.577-586, 1999.
DOI : 10.1007/s001700050105

S. G. Ponnambalam, P. Aravindan, and G. M. Naidu, A Multi-Objective Genetic Algorithm for Solving Assembly Line Balancing Problem, The International Journal of Advanced Manufacturing Technology, vol.16, issue.5, pp.341-352, 2000.
DOI : 10.1007/s001700050166

F. Pruvot, Conception et calcul des machines-outils -volume 1, 1993.

R. Rachamadugu, B. Et, and . Talbot, Improving the equality of workload assignments in assembly lines, International Journal of Production Research, vol.10, issue.3, pp.619-633, 1991.
DOI : 10.1287/mnsc.32.4.430

A. Raouf and C. Tsui, A new method for assembly line balancing having stochastic work elements, Computers & Industrial Engineering, vol.6, issue.2, pp.131-148, 1982.
DOI : 10.1016/0360-8352(82)90017-1

B. Rekiek, Assembly Line Design: Multiple objective grouping genetic algorithm and the balancing of mixed-model hybrid assembly line, Thèse de doctorat, 2001.

B. Rekiek, A. Et, and . Delchambre, Assembly Line Design: The Balancing of Mixed-Model Hybrid Assembly Lines with Genetic Algorithms, 2006.

B. Rekiek, A. Dolgui, A. Delchambre, and A. Bratcu, State of art of optimization methods for assembly line design, Annual Reviews in Control, vol.26, issue.2, pp.163-174, 2002.
DOI : 10.1016/S1367-5788(02)00027-5

B. Rekiek, P. De-lit, and A. Delchambre, Hybrid assembly line design and user's preferences, International Journal of Production Research, vol.1, issue.5, pp.1095-1111, 2002.
DOI : 10.1162/evco.1994.2.3.221

B. Rekiek, P. De-lit, F. Pellichero, T. L-'eglise, P. Fouda et al., A multiple objective grouping genetic algorithm for assembly line design, Journal of Intelligent Manufacturing, vol.12, issue.5/6, pp.467-485, 2001.
DOI : 10.1023/A:1012200403940

J. Renaud, V. Boly, and V. Rault-jacquot, Knowledge Capitalization and Time Reduction within Concurrent Engineering Concepts: Some Applications, Concurrent Engineering, vol.9, issue.4, pp.295-307, 2001.
DOI : 10.1177/1063293X0100900406

M. G. Resende, C. C. Et, and . Ribeiro, Greedy randomized adaptive search procedures. Handbook of Metaheuristics, pp.219-249, 2003.
DOI : 10.1007/0-306-48332-7_188

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.106.2098

M. G. Resende, L. S. Pitsoulis, and P. M. Pardalos, Fortran subroutines for computing approximate solutions of weighted MAX-SAT problems using GRASP, Discrete Applied Mathematics, vol.100, issue.1-2, pp.95-113, 2000.
DOI : 10.1016/S0166-218X(99)00171-7

J. Rubinovitz, G. Et, and . Levitin, Genetic algorithm for assembly line balancing, International Journal of Production Economics, vol.41, issue.1-3, pp.343-354, 1995.
DOI : 10.1016/0925-5273(95)00059-3

B. Ruby, J. Et, and R. Maranzana, Gpa-664, fabrication assistée par ordinateur , support des cours, 2007.

I. Sabuncuoglu, E. Erel, and M. Tanyer, Assembly line balancing using genetic algorithms, Journal of Intelligent Manufacturing, vol.11, issue.3, pp.295-310, 2000.
DOI : 10.1023/A:1008923410076

O. W. Salomons, Computer Support in the Design of Mechanical Products. Constraint specfication and satisfaction in feature-based design for manufacturing, Thèse de doctorat, 1995.

M. E. Salveson, The assembly line balancing problem, Journal of Industrial Engineering, vol.6, issue.3, pp.18-25, 1955.

S. C. Sarin, E. Erel, and E. M. Dar, A methodology for solving single-model, stochastic assembly line balancing problem, Omega, vol.27, issue.5, pp.525-535, 1999.
DOI : 10.1016/S0305-0483(99)00016-X

B. R. Sarker, J. G. Et, and . Shanthikumar, A generalized approach for serial or parallel line balancing, International Journal of Production Research, vol.6, issue.3, pp.109-133, 1983.
DOI : 10.1080/00207548308942341

S. E. Sarma, P. K. Et, and . Wright, Algorithms for the minimization of setups and tool changes in ???simply fixturable??? components in milling, Journal of Manufacturing Systems, vol.15, issue.2, pp.95-112, 1996.
DOI : 10.1016/0278-6125(96)82335-1

T. Sawik, Monolithic vs. hierarchical balancing and scheduling of a flexible assembly line, European Journal of Operational Research, vol.143, issue.1, pp.115-124, 2002.
DOI : 10.1016/S0377-2217(01)00328-9

A. Scholl, Balancing and sequencing of assembly lines, 1999.

A. Scholl and C. Becker, State-of-the-art exact and heuristic solution procedures for simple assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.666-693, 2006.
DOI : 10.1016/j.ejor.2004.07.022

A. Scholl and R. Klein, SALOME: A Bidirectional Branch-and-Bound Procedure for Assembly Line Balancing, INFORMS Journal on Computing, vol.9, issue.4, pp.319-334, 1997.
DOI : 10.1287/ijoc.9.4.319

A. Scholl and R. Klein, Balancing assembly lines effectively ??? A computational comparison, European Journal of Operational Research, vol.114, issue.1, pp.50-58, 1999.
DOI : 10.1016/S0377-2217(98)00173-8

A. Scholl and R. Klein, ULINO: Optimally balancing U-shaped JIT assembly lines, International Journal of Production Research, vol.37, issue.4, pp.721-736, 1999.
DOI : 10.1080/002075499191481

A. Scholl and S. Vo?, Simple assembly line balancing?Heuristic approaches, Journal of Heuristics, vol.32, issue.3, pp.217-244, 1996.
DOI : 10.1007/BF00127358

A. Scholl, N. Boysen, and M. Fliedner, The sequence-dependent assembly line balancing problem, OR Spectrum, vol.9, issue.3, 2007.
DOI : 10.1007/s00291-006-0070-3

S. Crownloc, More precision holes at a lower cost, 2004.

J. J. Shah, D. C. Anderson, and Y. S. Kim, A Discourse on Geometric Feature Recognition From CAD Models, Journal of Computing and Information Science in Engineering, vol.1, issue.1, pp.41-51, 2001.
DOI : 10.1115/1.1345522

J. J. Shah, M. Et-mantyla, and . Eds, Parametric and feature-based CAD, 1995.

A. Shtub, The effect of incompletion cost on line balancing with multiple manning of work stations, International Journal of Production Research, vol.22, pp.235-245, 1984.

M. Sniedovich, Analysis of a Preference Order Assembly Line Problem, Management Science, vol.27, issue.9, pp.1067-1080, 1981.
DOI : 10.1287/mnsc.27.9.1067

S. Y. Son, Design Principles and Methodolgies for Reconfigurable Machining Systems, 2000.

Y. N. Sotskov, A. Dolgui, and F. Werner, Mixed graph coloring for unit-time job-shop scheduling, International Journal of Mathematical Algorithms, vol.2, pp.289-323, 2001.

G. P. Sphicas, F. N. Et, and . Silverman, Deterministic Equivalents for Stochastic Assembly Line Balancing, A I I E Transactions, vol.10, issue.5, pp.280-282, 1976.
DOI : 10.1080/05695557608975078

J. Stark and . Ed, Product Lifecycle Management: 21st century Paradigm for Product Realisation, Series: Decision Engineering, 2005.

G. Suresh, S. Et, and . Sahu, Stochastic assembly line balancing using simulated annealing, International Journal of Production Research, vol.2, issue.8, pp.1801-1810, 1994.
DOI : 10.1287/opre.40.1.113

J. Szadkowski, Critical path concept for multi-tool cutting processes optimization . Manufacturing, Modeling, Management and Control IFAC Symposium, pp.393-398, 1997.

F. B. Talbot, J. H. Paterson, and W. V. Gehrlein, A Comparative Evaluation of Heuristic Line Balancing Techniques, Management Science, vol.32, issue.4, pp.430-454, 1986.
DOI : 10.1287/mnsc.32.4.430

F. M. Tonge, Summary of a Heuristic Line Balancing Procedure, Management Science, vol.7, issue.1, pp.21-39, 1960.
DOI : 10.1287/mnsc.7.1.21

A. Toumine, Eléments de cours : usinage v1, 2007.

A. Trabelsi, S. Meeran, and M. Carrard, Recognizing cavity volumes using a cell evaluated and directed adjacency graph (CEDAG) Revue Internationale de CFAO et d'informatique graphique, pp.10-607, 1995.

Y. Tseng, S. Et, and . Joshi, Recognizing multiple interpretations in 2??D machining of pockets, International Journal of Production Research, vol.12, issue.5, pp.1063-1086, 1994.
DOI : 10.1016/0010-4485(90)90093-R

Y. Tsujimura, M. Gen, and E. Kubota, Solving fuzzy assembly-line balancing problem with genetic algorithms, Computers & Industrial Engineering, vol.29, issue.1-4, pp.543-547, 1995.
DOI : 10.1016/0360-8352(95)00131-J

M. Tzur, A. Et, and . Altman, Minimization of tool switches for a flexible manufacturing machine with slot assignment of different tool sizes, IIE Transactions, vol.30, issue.2, pp.95-110, 2004.
DOI : 10.1007/BF01751122

T. L. Urban, W. C. Et, and . Chiang, An optimal piecewise-linear program for the U-line balancing problem with stochastic task times, European Journal of Operational Research, vol.168, issue.3, pp.771-782, 2006.
DOI : 10.1016/j.ejor.2004.07.027

K. Vijayakumar, G. Prabhaharan, P. Asokan, and R. Saravanan, Optimization of multi-pass turning operations using ant colony system, International Journal of Machine Tools and Manufacture, vol.43, issue.15, pp.1633-1639, 2003.
DOI : 10.1016/S0890-6955(03)00081-6

P. M. Vilarinho, A. S. Et, and . Simaria, A two-stage heuristic method for balancing mixed-model assembly lines with parallel workstations, International Journal of Production Research, vol.6, issue.6, pp.1405-1420, 2002.
DOI : 10.1080/00207549408957042

F. Villeneuve, Génération automatique des processus de fabrication. Fabrication Assistée par Ordinateur, pp.295-350, 2003.

J. Wang, T. Kuriyagawa, X. P. Wei, and D. M. Guo, Optimization of cutting conditions for single pass turning operations using a deterministic approach, International Journal of Machine Tools and Manufacture, vol.42, issue.9, pp.1023-1033, 2002.
DOI : 10.1016/S0890-6955(02)00037-8

T. S. Wee, M. J. Et, and . Magazine, Assembly line balancing as generalized bin packing, Operations Research Letters, vol.1, issue.2, pp.56-58, 1986.
DOI : 10.1016/0167-6377(82)90046-3

S. Wei, C. Lo, and C. Chang, Using throughput profit for selecting manufacturing process plan, Computers & Industrial Engineering, vol.32, issue.4, pp.939-948, 1997.
DOI : 10.1016/S0360-8352(97)00022-3

W. E. Wilhelm, A column-generation approach for the assembly system design problem with tool changes, International Journal of Flexible Manufacturing Systems, vol.11, issue.2, pp.177-205, 1999.
DOI : 10.1023/A:1008067422364

H. P. Williams and . Ed, Model building in mathematical programming, 1993.

J. M. Wilson, Formulation of a problem involving assembly lines with multiple manning of work stations, International Journal of Production Research, vol.24, issue.1, pp.59-63, 1986.
DOI : 10.1080/00207548408942450

N. K. Womer, Learning Curves, Production Rate, and Program Costs, Management Science, vol.25, issue.4, pp.312-319, 1979.
DOI : 10.1287/mnsc.25.4.312

. Octobre, ftp ://trf.education.gouv.fr/pub, 2006.

X. Xu, S. Et, and . Hinduja, Recognition of rough machining features in 2D components, Computer-Aided Design, vol.30, issue.7, pp.503-516, 1998.
DOI : 10.1016/S0010-4485(97)00090-0

L. E. Yelle, THE LEARNING CURVE: HISTORICAL REVIEW AND COMPREHENSIVE SURVEY, Decision Sciences, vol.17, issue.8, pp.302-328, 1979.
DOI : 10.1016/0019-8501(76)90037-7

G. W. Zhang, S. C. Zhang, and Y. S. Xu, Research on flexible transfer line schematic design using hierarchical process planning, Journal of Materials Processing Technology, vol.129, issue.1-3, pp.629-633, 2002.
DOI : 10.1016/S0924-0136(02)00670-2