Modélisation explicite de l’écaillage sous incendie du béton : approche thermo-hydro-mécanique avec des conditions aux limites évolutives - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Explicit modeling of fire induced spalling of concrete : a thermo-hydro-mechanical approach with evolving boundary conditions

Modélisation explicite de l’écaillage sous incendie du béton : approche thermo-hydro-mécanique avec des conditions aux limites évolutives

Résumé

In the recent years, there were major tunnels fires which caused fatalities and severe traffic restrictions. In such extreme conditions (temperatures exceeding 1200 °C for considerable time spans), pore pressure build-up, restrained thermal dilatation, cement paste to aggregate incompatibility, dehydration... are some main degradation mechanisms of concrete that may cause its thermal spalling. Progressive concrete spalling occurring during a fire presents as the breakdown of surface layers which flake into small pebble-like pieces. Then, the resistant section of the structure reduces which may lead to its premature failure.In this thesis, a THM finite element model is enriched with a detachment-buckling type criterion for progressive spalling. The thermo-hygral part of the THM model is based on the three fluid approach for partially saturated porous media. The mechanical part is derived within the framework of thermo-poro-mechanics coupled to damage and softening plasticity.The adopted modeling of spalling leads to a problem with evolving boundary and boundary conditions. A suitable numerical solution strategy without remeshing is then developed in order to transfer properly the THM boundary conditions simultaneously with spalling occurrence.The efficiency of the model THM-Spalling is illustrated by some numerical examples and by parametric studies. These studies identify the influence, on spalling, of size variation of spalling flakes, the average spalling velocity and uncertainties on different material parameters. Confrontation with experimental tests shows satisfactory capacity of the THM-Spalling model in reproducing qualitatively the occurrence of spalling
Dans les dernières années, les incendies majeurs dans les tunnels ont causé des dommages importants. Dans ces conditions extrêmes (la température dépasse rapidement 1200 °C), l'augmentation de pression dans les pores, la dilatation thermique empêchée, l'incompatibilité de dilatation thermique entre la pâte du ciment et des granulats, la déshydratation ... sont des principaux mécanismes de dégradation qui peuvent être à l'origine de l'écaillage. L'écaillage progressif pendant l'incendie se manifeste par le détachement de la surface du béton par petits morceaux réduisant ainsi la section résistante et pouvant conduire à une rupture prématurée de la structure. Dans cette thèse, un modèle éléments finis THM est enrichi par un modèle d'écaillage progressif en proposant un critère d'écaillage de type détachement-flambement. La partie thermo-hydrique du modèle THM est basée sur l'approche à trois fluides en milieux partiellement saturés. Le comportement mécanique est développé dans le cadre d'une approche thermo-poro-mécanique couplée à l'endommagement et à la plasticité adoucissante. Cette modélisation de l'écaillage conduit à un problème avec frontière et conditions aux limites évolutives. Une stratégie de résolution numérique sans remaillage a été développée pour transférer les conditions aux limites THM simultanément avec l'occurrence de l'écaillage. L'implémentation du modèle dans le code aux éléments finis CESAR-LCPC a permis de procéder à différentes études paramétriques et à des confrontations avec des essais pour évaluer les capacités opérationnelles du modèle à décrire l'occurrence de l'écaillage et identifier les paramètres majeurs qui la contrôlent
Fichier principal
Vignette du fichier
TH2012PEST1155_complete.pdf (3.64 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00787946 , version 1 (13-02-2013)

Identifiants

  • HAL Id : tel-00787946 , version 1

Citer

Minh Tuyen Phan. Modélisation explicite de l’écaillage sous incendie du béton : approche thermo-hydro-mécanique avec des conditions aux limites évolutives. Autre. Université Paris-Est, 2012. Français. ⟨NNT : 2012PEST1155⟩. ⟨tel-00787946⟩
548 Consultations
1816 Téléchargements

Partager

Gmail Facebook X LinkedIn More