.. Thermo-visco-plastic-variational-modelling, 63 3.2.1 Variational modelling for exponential softening law, p.63

M. Influence-of, 70 3.2.2.1 Strain rate sensibility m, p.72

. Odeshi, Adiabatic shear band in the bulk material, 2006.

. Bai, Voids and mico-cracks (Ti-6Al-4V alloy, 1994.

J. In, Error approximation of average stress under cyclic loading (3.40 and 3.41), p.95

B. Areias, P. M. Areias, and T. Belytschko, Two-scale shear band evolution by local partition of unity, International Journal for Numerical Methods in Engineering, vol.53, issue.5, pp.878-910, 2006.
DOI : 10.1002/nme.1589

B. Areias, P. M. Areias, and T. Belytschko, Two-scale method for shear bands: thermal effects and variable bandwidth, International Journal for Numerical Methods in Engineering, vol.44, issue.6, pp.658-696, 2007.
DOI : 10.1002/nme.2028

S. Armero, F. Armero, and J. C. Simo, A new unconditionally stable fractional step method for non-linear coupled thermomechanical problems, International Journal for Numerical Methods in Engineering, vol.26, issue.4, pp.737-766, 1992.
DOI : 10.1002/nme.1620350408

S. Armero, F. Armero, and J. C. Simo, A priori stability estimates and unconditionally stable product formula algorithms for nonlinear coupled thermoplasticity, International Journal of Plasticity, vol.9, issue.6, pp.749-782, 1993.
DOI : 10.1016/0749-6419(93)90036-P

. Bai, Characteristics and microstructure in the evolution of shear localization in Ti-6A1-4V alloy, Mechanics of Materials, vol.17, issue.2-3, pp.155-164, 1994.
DOI : 10.1016/0167-6636(94)90056-6

C. Batra, R. C. Batra, and L. Chen, Shear band spacing in gradient-dependent thermoviscoplastic materials, Computational Mechanics, vol.23, issue.1, pp.8-19, 1999.
DOI : 10.1007/s004660050381

K. Batra, R. C. Batra, and C. H. Kim, Analysis of shear banding in twelve materials, International Journal of Plasticity, vol.8, issue.4, pp.425-452, 1992.
DOI : 10.1016/0749-6419(92)90058-K

K. Batra, R. C. Batra, and K. I. Ko, An adaptive mesh refinement technique for the analysis of shear bands in plane strain compression of a thermoviscoplastic solid, Computational Mechanics, vol.32, issue.6, pp.369-379, 1992.
DOI : 10.1007/BF00363993

W. Batra, R. C. Batra, and Z. Wei, Shear band spacing in thermoviscoplastic materials, International Journal of Impact Engineering, vol.32, issue.6, pp.947-967, 2006.
DOI : 10.1016/j.ijimpeng.2004.08.001

W. Batra, R. C. Batra, and Z. G. Wei, Instability strain and shear band spacing in simple tensile/compressive deformations of thermoviscoplastic materials, International Journal of Impact Engineering, vol.34, issue.3, pp.448-463, 2007.
DOI : 10.1016/j.ijimpeng.2005.11.004

Z. Batra, R. C. Batra, and G. Zhang, Modified Smoothed Particle Hydrodynamics (MSPH) basis functions for meshless methods, and their application to axisymmetric Taylor impact test, Journal of Computational Physics, vol.227, issue.3, pp.1962-1981, 2008.
DOI : 10.1016/j.jcp.2007.10.001

R. C. Batra and G. M. Zhang, Analysis of adiabatic shear bands in elasto-thermo-viscoplastic materials by modified smoothed-particle hydrodynamics (MSPH) method, Journal of Computational Physics, vol.201, issue.1, pp.172-190, 2004.
DOI : 10.1016/j.jcp.2004.05.007

. Belytschko, A finite element with embedded localization zones, Computer Methods in Applied Mechanics and Engineering, vol.70, issue.1, pp.59-89, 1988.
DOI : 10.1016/0045-7825(88)90180-6

. Belytschko, Nonlinear finite elements for continua and structures, 2000.

L. Bodin, Bandes de cisaillement en thermo-viscoplasticité dynamique: applicationsàapplications`applicationsà l'usinage etàet`età la rupture ductile des métaux, 1996.

T. B. Bouchnak, Etude du comportement en sollicitations extrêmes et de l'usinabilite d'un nouvel alliage de titane aeronautique: le Ti555-3, 2010.

C. , B. Chen, L. Batra, and R. C. , Effect of material parameters on shear band spacing in work-hardening gradient dependent thermoviscoplastic materials, International Journal of Plasticity, vol.15, pp.551-574, 1999.

. Chichili, Adiabatic shear localization in ??-titanium: experiments, modeling and microstructural evolution, Journal of the Mechanics and Physics of Solids, vol.52, issue.8, pp.521889-1909, 2004.
DOI : 10.1016/j.jmps.2004.02.013

. Clifton, R. Molinari-]-clifton, and A. Molinari, Localisation de la déformation viscoplastique en cisaillement simple: résultats exacts en théorie non linéaire, C.R.Acad.Sci.Paris, vol.2, pp.1-4, 1983.

O. Dilellio, J. A. Dilellio, and W. E. Olmstead, Temporal evolution of shear band thickness, Journal of the Mechanics and Physics of Solids, vol.45, issue.3, pp.345-359, 1997.
DOI : 10.1016/S0022-5096(96)00098-1

J. A. Dilellio and W. E. Olmstead, Numerical solution of shear localization in Johnson???Cook materials, Mechanics of Materials, vol.35, issue.3-6, pp.571-580, 2003.
DOI : 10.1016/S0167-6636(02)00279-X

M. Dinzart, F. Dinzart, and A. Molinari, Structure of adiabatic shear bands in thermo-viscoplastic materials, European Journal of Mechanics - A/Solids, vol.17, issue.6, pp.923-938, 1998.
DOI : 10.1016/S0997-7538(98)90502-2

. Fancello, A variational formulation of constitutive models and updates in non-linear finite viscoelasticity, International Journal for Numerical Methods in Engineering, vol.39, issue.11, pp.651831-1864, 2006.
DOI : 10.1002/nme.1525

URL : https://hal.archives-ouvertes.fr/hal-01004966

. Gioia, . Ortiz, G. Gioia, and M. Ortiz, The two-dimensional structure of dynamic boundary layers and shear bands in thermoviscoplastic solids, Journal of the Mechanics and Physics of Solids, vol.44, issue.2, 1996.
DOI : 10.1016/0022-5096(95)00071-2

. Glimm, Mechanics of meterials tracking of shear band I. The one-dimensional case, pp.31-41, 1996.

D. E. Grady, Dissipation in adiabatic shear bands, Mechanics of Materials, vol.17, issue.2-3, pp.289-293, 1994.
DOI : 10.1016/0167-6636(94)90066-3

. Guduru, Dynamic shear bands: an investigation using high speed optical and infrared diagnostics, Mechanics of Materials, vol.33, issue.7, pp.33371-402, 2001.
DOI : 10.1016/S0167-6636(01)00051-5

J. He, Equivalent theorem of Hellinger-Reissner and Hu-Washizu variational principles, Journal of Shanghai University (English Edition), vol.20, issue.4, pp.36-41, 1997.
DOI : 10.1007/s11741-997-0041-1

. Hong, Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu???Al alloy processed by dynamic plastic deformation, Acta Materialia, vol.58, issue.8, pp.583103-3116, 2010.
DOI : 10.1016/j.actamat.2010.01.049

K. Hughes, T. J. Hughes, and G. Krishna, A study of strain localization in a multiple scale framework-The one-dimensional problem, Computer methods in applied mechanics and engineering, issue.97, pp.7825193-222, 1998.

. Khan, Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys, International Journal of Plasticity, vol.20, issue.12, pp.2233-2248, 2004.
DOI : 10.1016/j.ijplas.2003.06.005

. Larsson, Embedded localization band in undrained soil based on regularized strong discontinuity???theory and FE-analysis, International Journal of Solids and Structures, vol.33, issue.20-22, pp.3081-3101, 1996.
DOI : 10.1016/0020-7683(95)00272-3

M. Leroy, Y. M. Leroy, and A. Molinari, Stability of steady states in shear zones, Journal of the Mechanics and Physics of Solids, vol.40, issue.1, pp.40181-212, 1992.
DOI : 10.1016/0022-5096(92)90310-X

. Li, Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy, Materials Science and Engineering: A, vol.527, issue.15, pp.5273529-3535, 2010.
DOI : 10.1016/j.msea.2010.02.024

. Li, Dynamic mechanical properties in relation to adiabatic shear band formation in titanium alloy-Ti17, Materials Science and Engineering: A, vol.358, issue.12, pp.128-133, 2003.

. Li, Mesh-free simulations of shear banding in large deformation, International Journal of Solids and Structures, vol.37, issue.48-50, pp.48-507185, 2000.
DOI : 10.1016/S0020-7683(00)00195-5

. Li, Dynamic shear band propagation and micro-structure of adiabatic shear band. computational methods in applied mechanics and engineering, pp.73-92, 2001.

. Li, . Liu, S. Li, and W. K. Liu, Numerical simulations of strain localization in inelastic solids using mesh-free methods, pp.1285-1309, 1999.

. Li, Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition, International Journal of Solids and Structures, vol.39, issue.5, pp.1213-1240, 2002.
DOI : 10.1016/S0020-7683(01)00188-3

D. Liao, S. C. Liao, and J. Duffy, Adiabatic shear bands in a TI-6Al-4V titanium alloy, Journal of the Mechanics and Physics of Solids, vol.46, issue.11, pp.462201-2231, 1998.
DOI : 10.1016/S0022-5096(98)00044-1

. Love, . Batra, B. M. Love, and R. C. Batra, Determination of effective thermomechanical parameters of a mixture of two elastothermoviscoplastic constituents, International Journal of Plasticity, vol.22, issue.6, pp.1026-1061, 2006.
DOI : 10.1016/j.ijplas.2005.07.001

. Magness, High strain rate deformation behaviors of kinetic energy penetrator materials during ballistic impact, Mechanics of Materials, vol.17, issue.2-3, pp.147-154, 1994.
DOI : 10.1016/0167-6636(94)90055-8

D. Marchand, A. Marchand, and J. Duffy, An experimental study of the formation process of adiabatic shear bands in a structural steel, Journal of the Mechanics and Physics of Solids, vol.36, issue.3, pp.251-283, 1988.
DOI : 10.1016/0022-5096(88)90012-9

H. Marsden, J. E. Marsden, and T. J. Hughes, Mathematical Foundations of Elasticity, Journal of Applied Mechanics, vol.51, issue.4, 1983.
DOI : 10.1115/1.3167757

. Martinez, Dynamic deformation and adiabatic shear microstructures associated with ballistic plug formation and fracture in Ti???6Al???4V targets, Materials Science and Engineering: A, vol.454, issue.455, pp.454-455581, 2007.
DOI : 10.1016/j.msea.2006.11.097

. Medyanik, On criteria for dynamic adiabatic shear band propagation, Journal of the Mechanics and Physics of Solids, vol.55, issue.7, pp.551439-1461, 2007.
DOI : 10.1016/j.jmps.2006.12.006

S. Mercier, Etude de la formation et de la propagation d'une bande de cisaillement adiabatique, 1997.

. Meyer, . Manwaring, L. W. Meyer, and S. Manwaring, Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, 1986.

. Meyers, Shear localization in dynamic deformation of materials: microstructural evolution and self-organization, Materials Science and Engineering: A, vol.317, issue.1-2, pp.204-225, 2001.
DOI : 10.1016/S0921-5093(01)01160-1

. Meyers, Microstructural evolution in adiabatic shear localization in stainless steel, Acta Materialia, issue.5, pp.511307-1325, 2003.

. Moës, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.46, issue.1, pp.150131-150, 1999.
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.3.CO;2-A

A. Molinari, Collective behaviour and spacing shear bands, pp.1551-1575, 1997.
DOI : 10.1016/s0022-5096(97)00012-4

C. Molinari, A. Molinari, and R. J. Clifton, Analytical Characterization of Shear Localization in Thermoviscoplastic Materials, Journal of Applied Mechanics, vol.54, issue.4, pp.806-812, 1987.
DOI : 10.1115/1.3173121

. Murr, Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti???6Al???4V targets, Materials Science and Engineering: A, vol.516, issue.1-2, pp.205-216, 2009.
DOI : 10.1016/j.msea.2009.03.051

T. Needleman, A. Needleman, and V. Tvergaard, Analyses of Plastic Flow Localization in Metals, Applied Mechanics Reviews, vol.45, issue.3S, pp.3-18, 1992.
DOI : 10.1115/1.3121390

. Nemat-nasser, Dynamic response of conventional and hot isostatically pressed Ti???6Al???4V alloys: experiments and modeling, Mechanics of Materials, vol.33, issue.8, pp.425-439, 2001.
DOI : 10.1016/S0167-6636(01)00063-1

L. Nasser, S. Nemat-nasser, and Y. Li, Flow stress of f.c.c. polycrystals with application to OFHC Cu, Acta Materialia, vol.46, issue.2, pp.565-577, 1998.
DOI : 10.1016/S1359-6454(97)00230-9

. Nesterenko, Self-organization in the initiation of adiabatic shear bands, Acta Materialia, vol.46, issue.1, pp.327-340, 1998.
DOI : 10.1016/S1359-6454(97)00151-1

. Odeshi, Dynamic shear band propagation and failure in AISI 4340 steel, Journal of Materials Processing Technology, vol.169, issue.2, pp.150-155, 2005.
DOI : 10.1016/j.jmatprotec.2005.03.016

. Odeshi, Effect of heat treatment on adiabatic shear bands in a high-strength low alloy steel, Materials Science and Engineering: A, vol.419, issue.1-2, pp.69-75, 2006.
DOI : 10.1016/j.msea.2005.11.059

J. Oliver, MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS, International Journal for Numerical Methods in Engineering, vol.7, issue.21, pp.3575-3600, 1996.
DOI : 10.1002/(SICI)1097-0207(19961115)39:21<3575::AID-NME65>3.0.CO;2-E

J. Oliver, MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 2: NUMERICAL SIMULATION, International Journal for Numerical Methods in Engineering, vol.19, issue.21, pp.3601-3623, 1996.
DOI : 10.1002/(SICI)1097-0207(19961115)39:21<3601::AID-NME64>3.0.CO;2-4

. Oliver, Strong discontinuities and continuum plasticity models: the strong discontinuity approach, International Journal of Plasticity, vol.15, issue.3, pp.319-351, 1999.
DOI : 10.1016/S0749-6419(98)00073-4

C. Ortiz, M. Ortiz, and G. T. Camacho, Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, pp.2899-2938, 1996.

. Ortiz, A finite element method for localized failure analysis, Computer Methods in Applied Mechanics and Engineering, vol.61, issue.2, pp.189-214, 1987.
DOI : 10.1016/0045-7825(87)90004-1

P. Ortiz, M. Ortiz, and A. Pandolfi, Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, International Journal for Numerical Methods in Engineering, vol.142, issue.9, pp.1267-1282, 1999.
DOI : 10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7

S. Ortiz, M. Ortiz, and L. Stainier, The variational formulation of viscoplastic constitutive updates, Computer Methods in Applied Mechanics and Engineering, vol.171, issue.3-4, pp.3-4419, 1999.
DOI : 10.1016/S0045-7825(98)00219-9

URL : https://hal.archives-ouvertes.fr/hal-01007379

. Peirs, The use of hat-shaped specimens for dynamics, 2008.

. Peirs, The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti???6Al???4V, International Journal of Impact Engineering, vol.37, issue.6, pp.37703-714, 2010.
DOI : 10.1016/j.ijimpeng.2009.08.002

URL : https://hal.archives-ouvertes.fr/hal-00674106

T. Rabczuk, Discontinuous modelling of shear bands using adaptive meshfree methods. computational methods in applied mechanics and engineering, 2007.

. Rabczuk, A simplified mesh-free method for shear bands with cohesive surfaces, International Journal for Numerical Methods in Engineering, vol.50, issue.5, pp.993-1021, 2006.
DOI : 10.1002/nme.1797

. Rabczuk, T. Samaniego-]-rabczuk, and E. Samaniego, Discontinuous modelling of shear bands using adaptive meshfree methods, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.6-8, pp.641-658, 2008.
DOI : 10.1016/j.cma.2007.08.027

. Radovitzky, R. Ortiz-]-radovitzky, and M. Ortiz, Error estimation and adaptive meshing in strongly nonlinear dynamic problems, Computer Methods in Applied Mechanics and Engineering, vol.172, issue.1-4, pp.203-240, 1999.
DOI : 10.1016/S0045-7825(98)00230-8

. Ranc, Temperature field measurement in titanium alloy during high strain rate loading???Adiabatic shear bands phenomenon, Mechanics of Materials, vol.40, issue.4-5, pp.4-5255, 2008.
DOI : 10.1016/j.mechmat.2007.08.002

URL : https://hal.archives-ouvertes.fr/hal-00205125

I. B. Russak, Calculus of variations MA 4311 lecture notes, 2002.

J. C. Simo, Nonlinear stability of the time-discrete variational prolem of evolution in nonlinear heat conduction, plasticity and viscoplasticity. computational methods in applied mechanics and engineering, pp.111-131, 1991.

L. Stainier, Consistent incremental approximation of dissipation pseudo-potentials in the variational formulation of thermo-mechanical constitutive updates, Mechanics Research Communications, vol.38, issue.4, pp.315-319, 2011.
DOI : 10.1016/j.mechrescom.2011.03.011

URL : https://hal.archives-ouvertes.fr/hal-00768511

L. Stainier, Energy-based variational approach for thermomechanical coupling under dynamic conditions, Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering, 2011.

. Stainier, A micromechanical model of hardening, rate sensitivity and thermal softening in BCC single crystals, Journal of the Mechanics and Physics of Solids, vol.50, issue.7, pp.1511-1545, 2002.
DOI : 10.1016/S0022-5096(01)00114-4

URL : https://hal.archives-ouvertes.fr/hal-01004846

. Stainier, A variational framework for nonlinear viscoelastic and viscoplastic models in finite deformation regime, Mecánica Computacional, pp.455-465, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01007825

L. Stainier and M. Ortiz, Study and validation of a variational theory of thermo-mechanical coupling in finite visco-plasticity, International Journal of Solids and Structures, vol.47, issue.5, pp.47705-715, 2010.
DOI : 10.1016/j.ijsolstr.2009.11.012

. Teng, On the transition from adiabatic shear banding to fracture, Mechanics of Materials, vol.39, issue.2, pp.107-125, 2007.
DOI : 10.1016/j.mechmat.2006.03.001

G. Tzavaras, A. E. Tzavaras, and C. M. Gurtin, Effect of thermal softening in shearing of strain-rate dependent materials, Archive for Rational Mechanics and Analysis, vol.94, issue.4, pp.349-374, 1987.
DOI : 10.1007/BF00282051

. Wilson, N. M. Batra-]-wilson, and R. C. Batra, Adiabatic shear bands in plane strain deformations of a WHA, International Journal of Plasticity, vol.14, pp.1-343, 1998.

T. W. Wright, Scaling laws for adiabatic shear bands, International Journal of Solids and Structures, vol.32, issue.17-18, pp.4-9, 1995.
DOI : 10.1016/0020-7683(94)00289-9

T. W. Wright, Physics and Mathematics of Adiabatic Shear Bands, Applied Mechanics Reviews, vol.56, issue.3, 2002.
DOI : 10.1115/1.1566401

T. W. Wright, On the speed of an unconstrained shear band in a perfectly plastic material, International Journal of Solids and Structures, vol.40, issue.4, pp.871-879, 2003.
DOI : 10.1016/S0020-7683(02)00648-0

O. Wright, T. W. Wright, and H. Ockendon, A model for fully formed shear bands, Journal of the Mechanics and Physics of Solids, vol.40, issue.6, 1992.
DOI : 10.1016/0022-5096(92)90013-R

O. Wright, T. W. Wright, and H. Ockendon, A scaling law for the effect of inertia on the formation of adiabatic shear bands, International Journal of Plasticity, vol.12, issue.7, pp.927-934, 1996.
DOI : 10.1016/S0749-6419(96)00034-4

R. Wright, T. W. Wright, and G. Ravichandran, Canonical aspects of adiabatic shear bands, International Journal of Plasticity, vol.13, issue.4, pp.309-325, 1997.
DOI : 10.1016/S0749-6419(97)80002-2

. Xue, EBSD characterization of dynamic shear band regions in pre-shocked and as-received 304 stainless steels, Materials Science and Engineering: A, vol.473, issue.1-2, pp.279-289, 2008.
DOI : 10.1016/j.msea.2007.04.048

. Xue, Self-organization of shear bands in titanium and Ti???6Al???4V alloy, Acta Materialia, vol.50, issue.3, pp.575-596, 2002.
DOI : 10.1016/S1359-6454(01)00356-1

. Xue, Self organization of shear bands in stainless steel, Materials Science and Engineering: A, vol.384, issue.1-2, pp.35-46, 2004.
DOI : 10.1016/j.msea.2004.05.069

. Xue, Evaluation of the collapsing thick-walled cylinder technique for shear-band spacing, International Journal of Impact Engineering, vol.28, issue.3, pp.257-280, 2003.
DOI : 10.1016/S0734-743X(02)00103-3

X. Zhang, On the propagation of a shear band in a steel tube, Journal of Engineering Materials and Technology, vol.116, pp.155-161, 1994.

. Zhou, The formation of multiple adiabatic shear bands, Journal of the Mechanics and Physics of Solids, vol.54, issue.7, pp.541376-1400, 2006.
DOI : 10.1016/j.jmps.2006.01.006

B. Zhu, Z. G. Zhu, and R. C. Batra, Shear band development in a thermally softening viscoplastic body, Computers & Structures, vol.39, issue.5, pp.459-472, 1991.
DOI : 10.1016/0045-7949(91)90054-P