A. [. Alnaemi and . Moses, ] Polycopie cours ''application des aimants permanents, J. Magn. Magn. Mater, pp.794-797, 2006.

K. Altallah, Rotor loss in Permanent-magnet brushless AC machines, IEEE Trans. On Industry Applications, vol.36, issue.6, pp.1612-1618, 2000.

A. Bettayeb, R. Kaczmarek, and J. Vannier, Analytical Estimation of Rotor Loss Due to Stator Slotting of Synchronous PM Machines, pp.26-28, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00520513

S. [. Benabou, S. Georges, and . Clenet, Permanent magnet modelling for dynamic applications, Journal of Magnetism and Magnetic Materials, vol.320, issue.6, pp.830-835, 2008.
DOI : 10.1016/j.jmmm.2007.08.030

G. Bertotti, Physical interpretation of eddy current losses in ferromagnetic materials. I. Theoretical considerations, Journal of Applied Physics, vol.57, issue.6, pp.2210-2217, 1985.
DOI : 10.1063/1.334404

. Lazzari, An improved estimation of iron losses in rotating electrical machines, IEEE Transaction on Magnetics, vol.27, issue.6, pp.5007-5009, 1991.

. [. Bertotti, General properties of power losses in soft ferromagnetic materials, IEEE Transactions on Magnetics, vol.24, issue.1, pp.621-630, 1988.
DOI : 10.1109/20.43994

G. Bertotti, « Hysteresis in magnetism-For physicists, materials scientists, and engineers, 1998.

O. Bottauscio, M. Chiampi, and M. Repetto, Finite element analysis of iron loss behaviour. Effect of frequency and laminated thickness, Proc. Of Third Int. Workshop on EMF, Liege (Belgium), pp.417-422, 1996.

S. [. Bianchi, F. Bolognani, and . Luise, Potentials and Limits of High-Speed PM Motors, IEEE Transactions on Industry Applications, vol.40, issue.6, pp.1570-1578, 2004.
DOI : 10.1109/TIA.2004.836173

S. [. Bianchi, E. Bolognani, and . Fornasiero, A General Approach to Determine the Rotor Losses in Three-Phase Fractional-Slot PM Machines, 2007 IEEE International Electric Machines & Drives Conference, pp.634-641, 2007.
DOI : 10.1109/IEMDC.2007.382741

M. V. Chari, Finite-Element Solution of the Eddy-Current Problem in Magnetic Structures, IEEE Transactions on Power Apparatus and Systems, vol.93, issue.1, 1974.
DOI : 10.1109/TPAS.1974.293916

J. D. Ede, Effect of Axial Segmentation of Permanent Magnets on Rotor Loss in Modular Permanent-Magnet Brushless Machines, IEEE Transactions on Industry Applications, vol.43, issue.5, pp.1207-1213, 2000.
DOI : 10.1109/TIA.2007.904397

R. [. Gieras, M. J. Wang, ]. Kamperhir00, E. Gracia, K. Lange et al., Axial flux permanent magnet, Kluwer Academic Publisher New York, Chap III: materials and fabrication Numerical calculation of iron losses in electrical machines with a modified post-processing formula, Electrical machines and drives

H. Toda, Rotor Eddy-Current Loss in Permanent Magnet Brushless Machines, IEEE Transactions on Magnetics, vol.40, issue.4, pp.2104-2106, 2004.
DOI : 10.1109/TMAG.2004.832481

H. Toda, Rotor eddy-current loss in permanent magnet brushless machinesHigh-Speed Synchronous Reluctance Machine with Minimized Rotor Losses, IEEE Trans. on Magnetics IEEE Trans. on Industry Applications, vol.40, issue.36 2, pp.2104-2106, 2000.

]. R. Gla77 and . Gladron, Matériau magnétique usinable pour aimants permanents, à base de composés intermétalliques entre le Cobalt et les éléments des terres rares, Thèse école fédérale de Lausanne, 1977.

. [. Gautreau, Estimation des pertes fer dans les machines électriques, Modèle Loss surface et application aux machines synchrone à aimants, Thèse INP Grenoble, 2006.

T. Gautreau, Estimation des pertes fer dans les machines électrique. Modèle d'hystérésis loss surface et application aux machines synchrones à aimants

G. Grellet, Pertes dans les machines tournantes Technique de l'ingénieur, traiter d'électricité, 1989.

A. [. Gieras, L. D. Koening, and . Vanek, Calculation of eddy current losses in conductive sleeves of synchronous machines, 2008 18th International Conference on Electrical Machines
DOI : 10.1109/ICELMACH.2008.4800129

W. [. Kaczmarek, J. Huang, and . Vannier, Magnetic Losses Evaluation in PMSM Drive with Non Sinusoidal Supply by Finite Elements Analysis and Superposition Principle, 2007.

A. [. Katsumi and . Atsushi, Loss Investigation of Interior Permanent-Magnet Motors Considering Carrier Harmonics and Magnet Eddy Currents, IEEE Transactions on Industry Application, vol.45, pp.659-665, 2009.

. [. Lateb, Modélisation des machines asynchrones et synchrone à aimants avec prise en compte des harmoniques d'espaces et de temps, Thèse INP Lorraine, 1989.

T. A. Lipo, Introduction to AC machine design Wisconsin power electronics research centerCalculation of induction machine losses, LIV00] Pertes par la denture, p.287

L. Alberti, E. Fornasiero, N. Bianchi, and S. Bolognani, Impact of Rotor Losses in a 12-Slot 10-Pole Axial Flux PM Machine, 2008 IEEE Industry Applications Society Annual Meeting, 2008.
DOI : 10.1109/08IAS.2008.52

. [. Lateb, Modélisation des machines asynchrones et synchrone à aimants avec prise en compte des harmoniques d'espaces et de temps, Thèse INP Lorraine, 2006.

W. Leander, J. Matsch, and . Morgan, Electromagnetic and electromechanical machines

I. Magnétisme, EDP sciences collection Grenoble science, 2000.

. [. Bonnefille-r, . J. Mil94-]-t, and . Miller, Echauffements et pertes rotoriques d'un moteur synchrone autopiloté, pp.585-594, 1986.

C. Mercrow, A. G. Jack, J. M. Mastermannon99-]-f, and . Nong, determination of rotor eddy current losses in permanent magnet machinesElectromagnetic Field analysis of Induction Motors by Finite Element Method Eddy-current losses in the segmented surface-mounted magnets of a PM machine Die induction maschinen, Sixth International Conference on Electrical Machines and Drives. Publ. No. 376 These de polytechnique de Hong KongPIE00] Pierron , Polycopie de cours Supélec [POL99] H. Polinder and M. J. Hoeijmakers, pp.299-304, 1963.

S. [. Shah and . Lee, Rapid analytical optimisation of eddy current shield tickness for associated loss minimization in electrical machines, Proc. Of IEEE International on Electric Machines and Drives Conference, pp.1304-1310, 2005.

J. [. Salon and . Balley, Finite element calculation of harmonic losses in AC machine windings, IEEE Transactions on Magnetics, vol.29, issue.2, pp.1442-1445, 1993.
DOI : 10.1109/20.250674

S. [. Shah and . Lee, Rapid analytical optimisation of eddy current shield tickness for associated loss minimization in electrical machines, Proc. Of IEEE International on Electric Machines and Drives Conference, pp.1304-1310, 2005.

V. S. Jean-claude, Y. N. Williamson, and . Feng, Analyse Numérique des machines électriquesAnalyse et mesure des pertes dans les rotors des machines synchrones Calculation of stator slot harmonics fields, Thèse de doctorat, 1999.

. [. Williamson, Induction Motor Modeling Using Finite Elements, Proc. of Inter. Conf. on Electrical Machines, pp.1-8, 1994.