. Bibliographiques, Directive 93/42/CEE du Conseil relative aux dispositifs médicaux, Journal officiel des Communautés européennes, issue.1, 1993.

D. F. Williams, Definitions in Biomaterials, Proceedings of a Consensus Conference of the European Society for Biomaterials, 1987.

B. D. Ratner, B. D. Ratner, A. S. Hoffman, F. J. Schoen, and J. E. Lemons, Biomaterials Science: An Interdisciplinary Endeavor, Biomaterials Science: An introduction to Materials in Medicine, p.1, 1996.
DOI : 10.1016/B978-0-08-050014-0.50005-5

S. Ge, Q. Wang, D. Zhang, H. Zhu, D. Xiong et al., Friction and wear behavior of nitrogen ion implanted UHMWPE against ZrO 2 ceramic, Wear, vol.2556, pp.7-12, 2003.

D. E. Macdonald, N. Deo, B. Rapuano, M. Stranick, and A. L. Boskey, Thermal and chemical modification of titanium-aluminumvanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment, Biomaterials, vol.257, p.3135, 2004.

H. Spijker, H. Busscher, and W. V. Oeveren, Influence of abciximab on the adhesion of platelets on a shielded plasma gradient prepared on polyethylene, Thrombosis Research, vol.108, issue.1, p.57, 2002.
DOI : 10.1016/S0049-3848(02)00357-2

F. Z. Cui and Z. S. Luo, Biomaterials modification by ion implantation-3): p. 278 The influence of proteins on calcium phosphate deposition over titanium implants studied by dynamic contact angle analysis and XPS, Surface and Coatings Technology Colloids and Surfaces B: Biointerfaces, vol.112, issue.102, p.95, 1997.

F. Rupp, L. Scheideler, D. Rehbein, D. Axmann, and J. Geis-gerstorfer, Roughness induced dynamic changes of wettability of acid etched titanium implant modifications, Biomaterials, vol.25, issue.7-8, pp.7-8, 2004.
DOI : 10.1016/j.biomaterials.2003.08.015

N. A. Sevastjanova, L. A. Mansurova, L. E. Dombrovska, and L. I. Slutskii, Biochemical characterization of connective tissue reaction to synthetic polymer implants, Biomaterials, vol.8, issue.4, p.242, 1987.
DOI : 10.1016/0142-9612(87)90110-4

C. Guignot, Irradiation de polyuréthannes par électrons accélérés : évolution moléculaire et supramoléculaire, incidence sur les extractibles et implication biomédicales, Thèse de Doctorat, 2002.

G. Haesen, L. Goff, B. , and G. Ph, Trennung und Bestimmung von Spuren-Verunreinigungen plastik-verpackter Molkereiprodukte, Microchimica Acta, vol.14, issue.1-2, p.25, 1981.
DOI : 10.1007/BF01198700

F. Depledt, G. Bureau, and J. L. Multon, Risques organoleptiques pour l'aliment liés aux migrations, In L'emballage des denrées alimentaires de grande consommation, 1989.

R. Lefaux, Les matières plastiques dans l'industrie alimentaire, Publications techniques associées -Groupe de la Compagnie Française, 1972.

N. Yagoubi, Etude analytique des polymères et de leurs principaux additifs incidence de la stérilisation par les rayonnements ionisants, Thèse de Doctorat, 1991.

R. Farhi, C. Morel, and J. Chéron, Matières plastiques & adjuvants hygiène et sécurité, Institut National de Recherche et de Sécurité (INRS) ED 638, 2006.

F. Wang, Polydimethylsiloxane modification of segmented thermoplastic polyurethanes and polyureas. Thesis of Doctor of Philosophy in Chemistry, The Faculty of the Virginia Polytechnic Institute, 1998.

T. Chandy and S. Cp, Biocompatibity and toxicological screening of materials, Blood Compatible Materials and devices, Sharma CP & Szycher M, p.131, 1991.

K. C. Frisch, Recent advances in the chemistry of polyurethanes. Rubber Chemistry and Technology, p.1442, 1972.

S. K. Brauman, G. D. Mayorga, and J. Heller, Light stability and discoloration of segmented polyether urethanes, Annals of Biomedical Engineering, vol.23, issue.1, p.45, 1981.
DOI : 10.1007/BF02584557

O. G. Takakanov, L. V. Nevskji, and V. K. Beljakov, Photodestruction and photooxidative destruction of polyurethanes, Journal of Polymer Science Part C: Polymer Symposia, vol.6, issue.1, p.193, 1968.
DOI : 10.1002/polc.5070230124

C. Guignot, Apport des techniques analytiques dans l'étude des polyuréthannes à usage pharmaceutique et biomédical, Thèse d'exercice, 1998.

K. Weissermel and H. Arpe, Industrielle Organische Chemie, p.400, 1978.

D. H. Chadwick, E. E. Hardy, . Isocyanates, I. K. Organic, E. A. Parolla et al., Othmer Encyclopedia of Chemical Technology, p.45, 1967.

D. C. Allport, D. S. Gilbert, and S. M. Outterside, MDI and TDI: Safety, Health and the Environment, Online, 2003.
DOI : 10.1002/0470865687

D. J. Martin, G. F. Meijs, P. A. Gunatillake, S. J. Mccarthy, and G. M. Renwick, The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. II. SAXS-DSC annealing study, Journal of Applied Polymer Science, vol.64, issue.4, p.803, 1997.
DOI : 10.1002/(SICI)1097-4628(19970425)64:4<803::AID-APP20>3.0.CO;2-T

D. J. Martin, G. F. Meijs, P. A. Gunatillake, S. P. Yozghatlian, and G. M. Renwick, The influence of composition ratio on the morphology of biomedical polyurethanes, Journal of Applied Polymer Science, vol.34, issue.28, p.937, 1999.
DOI : 10.1002/(SICI)1097-4628(19990207)71:6<937::AID-APP9>3.0.CO;2-0

R. W. Seymour and S. L. Cooper, Thermal Analysis of Polyurethane Block Polymers, Macromolecules, vol.6, issue.1, p.48, 1973.
DOI : 10.1021/ma60031a008

V. W. Srichatrapimuk and S. L. Cooper, Infrared thermal analysis of polyurethane block polymers, Journal of Macromolecular Science, Part B, vol.12, issue.1, p.267, 1978.
DOI : 10.1080/00222347808212599

H. S. Lee, Y. K. Wang, and S. L. Hsu, Spectroscopic analysis of phase separation behavior of model polyurethanes, Macromolecules, vol.20, issue.9, p.2089, 1987.
DOI : 10.1021/ma00175a008

H. Ulrich and H. W. Bonk, Emerging Biomedical Applications of Polyurethane Elastomers, Polyurethane in biomedical engineering. H.Planck G.Egbers, I.Syré, p.165, 1984.
DOI : 10.1177/0021955X8301900203

N. Sheikh, The effect of radiosterilization on cytotoxicity of polyurethane film. Nuclear instruments and methods in physics research B, p.215, 2003.

M. Aggoune, M. Chaluumeau, H. Duval, J. Lamory, and D. Landriu, La désinfection des surfaces des locaux, Pratiques Guide De Bonnes Centre de Coordination de la Lutte contre les Infections Nosocomiales de l'Interrégion (CCLIN) Paris Nord, 2000.

M. Zumofen and C. Logghe, Recommandations en matière de stérilisation Vol, 2006.

M. Aggoune, C. Bardez, M. Coureul, D. Farret, A. Legros et al., Hygiène et prise en charge des dispositifs médicaux en consultation d'ophtalmologie, Centre de Coordination de la Lutte contre les Infections Nosocomiales de l'Interrégion (CCLIN) Paris Nord, 2000.

M. F. Blech and F. Benoît, La stérilisation des dispositifs médicaux, In Tirésias, 2001.

S. Adige, Etude comparative des effets de la radiosterilisation et de la sterilisation par decharge plasma, 2001.

N. Lopez, Effets structuraux du traitement par les gaz plasma sur les matériaux polymères, 2004.

E. Postaire, Les matières plastiques à usage pharmaceutique : propriétés générales et biotechniques 2 ème ed, Editions Médicales Internationales, p.546, 1991.

M. Chaigneau, Stérilisation à l'oxyde éthylène conditionnement, C. R. Coll. sur stérilisation et conditionnement (Ass. Cond. et Santé), p.7, 1986.

R. Holyoakg, S. Wang, Y. Liu, and T. D. Bunch, Toxic effects of ethylene oxide residues on bovine embryos in vitro Toxicology, p.33, 1996.

C. E. Holy, C. Cheng, J. E. Davies, and M. S. Shoichet, Optimizing the sterilization of PLGA scaffolds for use in tissue engineering, Biomaterials, vol.22, issue.1, p.25, 2001.
DOI : 10.1016/S0142-9612(00)00136-8

C. Moyon and M. Moyon, Produits et matériaux à stériliser, La stérilisation en milieu hospitalier. Avane, 1989.

K. J. Hemmerich, Polymer Materials Selection for Radiation-Sterilized Products. Medical Device & Diagnostic Industry Magazine, 2000.

P. Icre, Stérilisation par les rayonnements ionisants et choix des matériaux (ASS. Cond. et Santé), C. R. sur Stérilisation et conditionnement, p.32, 1986.
DOI : 10.1051/rgn/19821020

D. A. Charlesby, Atomic Radiation and Polymersr, p.335, 1960.

M. Sage, Initiation à la prévention des risques professionnels, La radioprotection, p.45, 2003.

W. P. Menashi, Treatment of surfaces, US Patent, vol.3, pp.383-163, 1968.

L. E. Ashman and W. P. Menashi, Treatment of surfaces with low pressure plasmas, 1972.

). R. Boucher-(-gut, Seeded gas plasma sterilization method, 1980.

R. M. Bithell, Package and sterilizing process for same, 1982.

M. Moisan, J. Barbeau, S. Moreau, J. Pelletier, M. Tabrizian et al., Low-temperature sterilization using gas plasmas: a review of the experiments and an analysis of the inactivation mechanisms, International Journal of Pharmaceutics, vol.226, issue.1-2, p.1, 2001.
DOI : 10.1016/S0378-5173(01)00752-9

M. Goldman and A. Goldman, Nature des espèces réactives formées par les décharges électriques dans les gaz à haute pression, Journal of High Temperature Chemical Processes, vol.2, p.215, 1993.

M. N. Khalid, Synthèse, caractérisation, stérilisation et étude des propriétés de réseaux à base de chitosane Application à la libération contrôlée pour l'administration orale et comme enrobage pour des prothèses endovasculaires Thèse de Doctorat, 2002.

P. T. Jacobs and S. M. Lin, Hydrogen peroxide plasma sterilization system, US Patent, vol.4, pp.643-876, 1987.

). R. Boucher-(-gut, State of the art in gas plasma sterilization, Med. Device Diagnost. Indust, vol.7, p.51, 1985.

J. Feichtinger, A. Scultz, M. Walker, and U. Schumacher, Sterilisation with low pressure microwaves plasmas. Surface and coating technology, p.564, 2003.
DOI : 10.1016/s0257-8972(03)00404-3

B. D. Ratner, A. Chilkoti, and G. P. Lopez, Plasma Deposition, Treatment, and Etching of Polymers, 1990.

C. L. Nelson and T. J. Berger, Inactivation of microorganisms by oxygen gas plasma, Current Microbiology, vol.18, issue.4, p.275, 1989.
DOI : 10.1007/BF01570305

S. J. Fraser, R. B. Gillette, and R. L. Olsen, Sterilizing process and apparatus utilizing gas plasma, US Patent, vol.3, pp.948-601, 1976.

J. C. Darbord and C. Chopard, Bonnes pratiques de stérilisation-Désinfection

L. A. Feldman and H. K. Hui, Compatibility of medical devices and materials with low-temperature hydrogen peroxide gas plasma, Medical Device & Diagnostic Industry Magazine, 1997.

J. Johnson, Sterrad ® 100, 1 ère nouvelle en stérilisation, Johnson & Johnson Medical, 1993.

M. C. Krebs, P. Bécasse, D. Verjat, and J. C. Darbord, Gas???plasma sterilization: relative efficacy of the hydrogen peroxide phase compared with that of the plasma phase, International Journal of Pharmaceutics, vol.160, issue.1, p.75, 1998.
DOI : 10.1016/S0378-5173(97)00296-2

I. Jobet-hermelin, C. Guilmin, N. Royer, Z. Djenadi, A. Daguenel-nguyen et al., Stérilisation par plasma de peroxyde d'hydrogène (Sterrad ® ), Journal de pharmacie clinique, vol.15, p.55, 1996.

A. F. Widmer, P. Francioli, and F. Cavin, Stérilisation au plasma: mise à jour, in swiss-noso, 2000.

S. Crow and J. H. Smith, Gas Plasma Sterilization: Application of Space-Age Technology, Infection Control and Hospital Epidemiology, vol.16, issue.8, p.483, 1995.
DOI : 10.2307/30141085

P. Buisson, Décontamination, désinfection et stérilisation du matériel arthroscopique. Sofarthro, ANNALES: http://www.sofarthro.com, ANNALES, 1998.

S. Lerouge, M. Tabrizian, M. R. Wertheimer, R. Marchand, and L. Yahia, Safety of plasma-based sterilization: surface modifications of polymeric medical devices induced by Sterrad and Plazlyte processes, Biomed Mater Eng, vol.12, issue.1, p.3, 2002.

. Abtox, Plazlyte ® gas plasma sterilization system, p.3, 1996.

C. A. Smith, J. M. Khoury, S. M. Shields, G. J. Roper, R. E. Duffy et al., Unexpected corneal endothelial cell decompensation after intraocular surgery with instruments sterilized by plasma gas, Ophthalmology, vol.107, issue.8, p.1561, 2000.
DOI : 10.1016/S0161-6420(00)00174-3

J. Morre, La radiostérilisation et ses applications au matériel médical à usage unique. Recueil Medicinal Veterinaire, p.231, 1975.

J. Pelletier, La stérilisation par le procédé plasma, Agressologie, vol.33, p.105, 1993.

M. R. Wertheimer, A. C. Fozza, A. Ander, and . Holl, Industrial processing of polymers by low-pressure plasmas: the role of VUV radiation. Nuclear Instruments and Methods in, Physics Research B, vol.151, p.65, 1999.

T. K. Subramanyam, R. Schwefel, and P. Awakowicz, Plasma Sterilization and Correlation to Plasma Diagnostics. VIDE?Science Technique Applications, p.169, 2002.

M. Moisan, D. Baril, J. Barbeau, B. Saoudi, and N. Philip, La stérilisation par plasma pourrait détruire les prions. Forum, p.17, 2001.

S. Moreau, M. Moisan, M. Tabrizian, J. Barbeau, J. Pelletier et al., spores: Influence of the operating conditions, Journal of Applied Physics, vol.88, issue.2, p.1166, 2000.
DOI : 10.1063/1.373792

N. Médard, J. C. Soutif, and F. Poncin-epaillard, Characterization of CO 2 plasma treated polyethylene surface bearing carboxylic groups. Surface and coating technology, p.197, 2002.

G. Poletti, F. Orsini, A. Raffaele-addamo, C. Riccardi, and E. Selli, Cold plasma treatment of PET fabrics: AFM surface morphology characterisation Applied surface science, pp.3-4, 2003.

F. Dreux, S. Marais, F. Poncin-epaillard, M. Metayer, M. Labbe et al., Water and toluene barrier properties of a polyamide 12 modified by a surface treatment using cold plasma, Materials Research Innovations, vol.7, issue.3, p.183, 2003.
DOI : 10.1007/s10019-003-0247-1

N. Mozes, The ways we study interfacial phenomena of living cells, In Adhésion des micro-organismes aux surfaces: biofilm, nettoyage, désinfection. Bellon-Fontaine M, p.4, 1994.

K. Vacheethasanee, R. E. Marchant, Y. H. An, and R. J. Friedman, Non specific Staphylococcus epidermidis Adhesion: Contributions of Biomaterial Hydrophobicity and Charge, In Handbook of Bacterial Adhesion: Principles, Methods, and Applications, p.73, 2000.

M. Bellon-fontaine and A. Vernhet, Adhésion de particules et de microorganismes aux surfaces solides, In Nettoyage, désinfection et hygiène dans les bioindustries, Leveau J.-Y. and Bouix M, p.25, 1999.

W. G. Characklis, Process Analysis in microbial systems: biofilms as a case study, In Bazin M. Mathematics in microbiology, p.171, 1983.

W. G. Characklis, M. Turakhia, and N. Zelver, Transport and interfacial transfer phenomena, p.265, 1990.

K. C. Marshall, Adsorption and adhesion processes in microbial growth at interfaces. Advances in colloid and interface science, p.59, 1986.
DOI : 10.1016/0001-8686(86)80002-1

A. M. James, The electrical properties and topochemistry of bacterial cells, Advances in Colloid and Interface Science, vol.15, issue.3-4, pp.3-4, 1982.
DOI : 10.1016/0001-8686(82)80001-8

A. M. James, N. Mozes, P. S. Handley, H. J. Busscher, and P. G. Rouxhet, Charge properties of microbial cell surfaces, In Microbial Cell Surface Analysis: Structural and Physicochemical Methods (Hardcover), p.221, 1991.

C. J. Van-oss, Acid base interfaciai interactions in aquacous media. Colloids and surfaces A: Physicochem. and engineering aspects 1993, p.1

D. R. Absolom, F. V. Lamberti, Z. Policovaz, W. Zing, C. J. Van-oss et al., Surface thermodynamics of bacterial adhesion, Applied and environmental microbiology, vol.46, p.90, 1983.

R. P. Schneider, Conditioning Film-Induced Modification of Substratum Physicochemistry???Analysis by Contact Angles, Journal of Colloid and Interface Science, vol.182, issue.1, p.204, 1996.
DOI : 10.1006/jcis.1996.0452

J. Tsibouklis, M. Stone, A. A. Thorpe, P. Graham, V. Peters et al., Preventing bacterial adhesion onto surfaces: the low-surface-energy approach, Biomaterials, vol.20, issue.13, p.1229, 1999.
DOI : 10.1016/S0142-9612(99)00023-X

G. M. Bruinsma, M. Rustema-abbing, J. Vries, H. J. Busscher, M. L. Van-der-linden et al., Multiple surface properties of worn RGP lenses and adhesion of Pseudomonas aeruginosa, Biomaterials, vol.24, issue.9, p.1663, 2003.
DOI : 10.1016/S0142-9612(02)00542-2

H. Yuehuei, A. Richard, and J. Friedman, Concise review of mechanisms of bacterial adhesion to biomaterial surfaces, Journal of Biomedical Materials Research, vol.43, issue.3, p.338, 1998.

A. H. Hogt, J. Dankert, and J. Feijen, Adhesion of Staphylococcus epidermidis and Staphylococcus saprophyticus to a Hydrophobic Biomaterial, Microbiology, vol.131, issue.9, p.2485, 1985.
DOI : 10.1099/00221287-131-9-2485

J. Dankert, A. H. Hogt, and J. Feijen, Bacterial adhesion, colonization and infection, CRC Crit Rev Biocomp. Journal of Biomedical polymers, vol.2, p.219, 1986.

M. Fletcher, Bacterial adhesion: molecular and ecological diversity Adhesion to biornaterials, pp.89-116, 1996.

B. Gottenbos, H. C. Van-der-mei, H. J. Busscher, D. W. Grijpma, and J. Feijen, Initial adhesion and surface growth of Pseudomonas aeruginosa on negatively and positively charged poly(methacrylates), Journal of Materials Science: Materials in Medicine, vol.10, issue.12, p.853, 1999.
DOI : 10.1023/A:1008989416939

Y. Ong, A. Razatos, G. Georgiou, and M. M. Sharma, Adhesion Forces between E. coli Bacteria and Biomaterial Surfaces Langmuir, p.2719, 1999.

P. Garry, T. Andersen, J. L. Vendeuvre, and M. N. Bellon-fontaine, Influence de la rugosité de surfaces en polyuréthane sur l'adhésion de Bacillus subtilis et Bacillus cereus, In Adhésion des micro-organismes aux surfaces : biofilm, nettoyage, désinfection. Bellon-Fontaine M.-N. and Fourniant J, p.21, 1994.

Y. Liu, Adhesion kinetics of nitrifying bacteria on various thermoplastic supports, Colloids and Surfaces B: Biointerfaces, vol.5, issue.5, p.213, 1995.
DOI : 10.1016/0927-7765(95)01215-X

M. Bouix, J. Leveau, and J. Mescle, Importance des phénomènes microbiens dans les procédés alimentaires et biologiques, In Nettoyage, désinfection et hygiène dans les bio-industries, Leveau J.-Y. and Bouix M, p.87, 1999.

L. Brisset, V. Vernet-garnier, J. Carquin, A. Burde, J. B. Flament et al., Analyse in vivo et in vitro de l'aptitude à la colonisation microbienne des sondes urinaires, Pathologie et Biologie, vol.44, issue.5, p.397, 1996.

K. Merritt, H. A. Yuehuei, H. A. Yuehuei, M. D. Richard, and J. Friedman, Factors Influencing Bacterial Adhesion, In Handbook of Bacterial Adhesion-Principles, Methods, and Applications, 2000.

G. Speranza, G. Gottardi, C. Pederzolli, L. Lunelli, R. Canteri et al., Role of chemical interactions in bacterial adhesion to polymer surfaces, Biomaterials, vol.25, issue.11, p.2029, 2004.
DOI : 10.1016/j.biomaterials.2003.08.061

S. Dumitriu and C. Dumitriu-medvichi, Polymer Structure Properties, Polymeric Biomaterials. Dumitriu S, p.66, 1994.

A. Ludwicka, B. Jansen, T. Wadstrom, and G. Pulverer, Attachment of staphylococci to various synthetic polymers, p.479, 1984.

K. Rasmussen and K. Ostgaard, Adhesion of the marine bacterium Pseudomonas sp. NCIMB 2021 to different hydrogel surfaces, Water Research, vol.37, issue.3, p.519, 2003.
DOI : 10.1016/S0043-1354(02)00306-8

R. N. Sodhi, V. P. Sahi, and M. W. Mittelman, Application of electron spectroscopy and surface modification techniques in the development of antimicrobial coatings for medical devices, Journal of Electron Spectroscopy and Related Phenomena, vol.121, pp.1-3, 2001.

N. R. James and A. Jayakrishnan, Surface thiocyanation of plasticized poly(vinyl chloride) and its effect on bacterial adhesion, Biomaterials, vol.24, issue.13, p.2205, 2003.
DOI : 10.1016/S0142-9612(03)00022-X

A. R. Yousefi, H. Ayhan, U. Kisa, and E. Piskin, Adhesion of different bacterial strains to low-temperature plasma treated biomedical PVC catheter surfaces, Journal of Biomaterials Science, Polymer Edition, vol.67, issue.9, p.915, 1998.
DOI : 10.1163/156856298X00244

B. Gottenbos, H. C. Van-der-mei, F. Klatter, D. W. Grijpma, J. Feijen et al., Positively charged biomaterials exert antimicrobial effects on gram-negative bacilli in rats, Biomaterials, vol.24, issue.16, p.2707, 2003.
DOI : 10.1016/S0142-9612(03)00083-8

J. H. Park, Y. W. Cho, I. C. Kwon, S. Y. Jeong, and Y. H. Bae, Assessment of PEO/PTMO multiblock copolymer/segmented polyurethane blends as coating materials for urinary catheters: in vitro bacterial adhesion and encrustation behavior, Biomaterials, vol.23, issue.19, p.3991, 2002.
DOI : 10.1016/S0142-9612(02)00144-8

R. G. Flemming, C. C. Capelli, S. L. Cooper, and R. A. Proctor, Bacterial colonization of functionalized polyurethanes, Biomaterials, vol.21, issue.3, p.273, 2000.
DOI : 10.1016/S0142-9612(99)00176-3

F. Espersen, M. Wurr, L. Corneliussen, A. L. Hog, V. T. Rosdahl et al., Attachment of staphylococci to different plastic tubes in vitro, Journal of Medical Microbiology, vol.40, issue.1, p.37, 1994.
DOI : 10.1099/00222615-40-1-37

E. Walckenaer, Evaluation de l'impact d'un procédé de stérilisation par plasma sur les polymères par analyses chimiques et microbiologiques, Thèse d'exercice, 2000.

J. Fauchère and J. Avril, Bactériologie générale et médicale, Ellipses, vol.365, 2002.

M. Pibiri, Assainissement microbiologique de l'air et des systèmes de ventilation au moyen d'huiles essentielles, Thèse de Doctorat, Institut des infrastructures, des ressources et de l'environnement, 2005.

J. Larbre, M. Ganciu, A. M. Pointu, M. Touzeau, J. Orphal et al., An atmospheric afterglow as source of flowing nitrogen atoms, International Workshop on Cold Atmospheric Pressure Plasmas: Sources and Applications (CAPPSA), pp.14-16, 2004.

A. Pointu, A. Ricard, B. Dodet, E. Odic, J. Larbre et al., flowing post-discharges at atmospheric pressure for sterilization, Journal of Physics D: Applied Physics, vol.38, issue.12, 1905.
DOI : 10.1088/0022-3727/38/12/009

H. Nyqvist, Saturated salt solutions for maintaining specified relative humidities, International Journal of Pharmaceutics & Product Manufacturer, vol.4, issue.2, p.47, 1983.

G. W. Ehrenstein, Praxis der Thermischen Analyse von Kunststoffen, p.29, 1998.

J. Rivoal and C. Frétigny, Microscopie à force atomique (AFM). R 1 394, 2005.

B. J. Tyler, B. D. Ratner, D. G. Castner, and D. Briggs, Variations between Biomer??? lots. I. Significant differences in the surface chemistry of two lots of a commercial poly(ether urethane), Journal of Biomedical Materials Research, vol.2, issue.3, p.273, 1992.
DOI : 10.1002/jbm.820260302

S. M. Mccarthy, G. F. Meijs, N. Mitchell, P. A. Gunatillake, G. Heath et al., In-vivo degradation of polyurethanes: transmission-FTIR microscopic characterization of polyurethanes sectioned by cryomicrotomy, Biomaterials, vol.18, issue.21, p.1387, 1997.
DOI : 10.1016/S0142-9612(97)00083-5

R. W. Seymour, G. M. Estes, and S. L. Cooper, Infrared Studies of Segmented Polyurethan Elastomers. I. Hydrogen Bonding, Macromolecules, vol.3, issue.5, p.579, 1970.
DOI : 10.1021/ma60017a021

Y. M. Boyarchuk, L. Y. Rapport, V. N. Nikitin, and N. P. Apukhtine, A study of hydrogen bonding in urethane elastomers by infrared spectroscopy, Polymer Science U.S.S.R., vol.7, issue.5, p.859, 1965.
DOI : 10.1016/0032-3950(65)90004-3

A. Dong, T. Wan, S. Feng, and D. Sun, IR spectra studies of core-shell type waterborne polyacrylate-polyurethane microemulsions, Journal of Polymer Science Part B: Polymer Physics, vol.3, issue.18, p.2642, 1999.
DOI : 10.1002/(SICI)1099-0488(19990915)37:18<2642::AID-POLB8>3.0.CO;2-D

C. S. Sung and N. S. Schneider, Infrared Studies of Hydrogen Bonding in Toluene Diisocyanate Based Polyurethanes, Macromolecules, vol.8, issue.1, p.68, 1975.
DOI : 10.1021/ma60043a015

C. M. Brunette, S. L. Hsu, and W. J. Macknight, Hydrogen-bonding properties of hard-segment model compounds in polyurethane block copolymers, Macromolecules, vol.15, issue.1, p.71, 1982.
DOI : 10.1021/ma00229a014

H. S. Lee, Y. K. Wang, W. J. Macknight, and S. L. Hsu, Spectroscopic analysis of phase-separation kinetics in model polyurethanes, Macromolecules, vol.21, issue.1, p.270, 1988.
DOI : 10.1021/ma00179a055

G. M. Barrow, Conjugation and the Intensity of the Infrared Carbonyl Band, The Journal of Chemical Physics, vol.21, issue.11, 1953.
DOI : 10.1063/1.1698732

M. M. Coleman, K. H. Lee, D. J. Skrovanek, and P. C. Painter, Hydrogen bonding in polymers. 4. Infrared temperature studies of a simple polyurethane, Macromolecules, vol.19, issue.8, p.2149, 1986.
DOI : 10.1021/ma00162a008

K. M. Herrera, G. Matuschek, and A. Kettrup, Thermal degradation of thermoplastic polyurethane elastomers (TPU) based on MDI. Polymer Degradation and stability, p.323, 2002.

R. W. Seymour and S. L. Cooper, DSC studies of polyurethane block polymers, Journal of Polymer Science Part B: Polymer Letters, vol.9, issue.9, p.689, 1971.
DOI : 10.1002/pol.1971.110090911

T. R. Hesketh, J. W. Bogart, and C. S. Van, Differential scanning calorimetry analysis of morphological changes in segmented elastomers, Polymer Engineering and Science, vol.19, issue.3, p.190, 1980.
DOI : 10.1002/pen.760200304

J. A. Miller, S. B. Lin, K. K. Hwang, K. S. Wu, P. E. Gibson et al., Properties of polyether-polyurethane block copolymers: effects of hard segment length distribution, Macromolecules, vol.18, issue.1, p.32, 1985.
DOI : 10.1021/ma00143a005

J. T. Koberstein and A. F. Galambos, Multiple melting in segmented polyurethane block copolymers, Macromolecules, vol.25, issue.21, p.5618, 1992.
DOI : 10.1021/ma00047a010

A. Frick and A. Rochman, Characterization of TPU-elastomers by thermal analysis (DSC) Polymer Testing, p.413, 2004.

S. L. Samuels and G. L. Wilkes, The rheo-optical and mechanical behavior of a systematic series of hard-soft segmented urethanes, Journal of Polymer Science: Polymer Symposia, vol.12, issue.7, p.149, 1973.
DOI : 10.1002/polc.5070430115

L. M. Leung and J. T. Koberstein, DSC annealing study of microphase separation and multiple endothermic behavior in polyether-based polyurethane block copolymers, Macromolecules, vol.19, issue.3, p.706, 1986.
DOI : 10.1021/ma00157a038

J. T. Koberstein and T. P. Rusell, Simultaneous SAXS-DSC study of multiple endothermic behavior in polyether-based polyurethane block copolymers, Macromolecules, vol.19, issue.3, p.714, 1986.
DOI : 10.1021/ma00157a039

A. Saiani, W. A. Daunch, H. Verbeke, J. W. Leenslag, and J. S. Higgins, Origin of Multiple Melting Endotherms in a High Hard Block Content Polyurethane. 1, Thermodynamic Investigation. Macromolecules, p.9059, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00250169

T. K. Chen, J. Y. Chui, and T. S. Shieh, Glass Transition Behaviors of a Polyurethane Hard Segment based on 4,4???-Diisocyanatodiphenylmethane and 1,4-Butanediol and the Calculation of Microdomain Composition, Macromolecules, vol.30, issue.17, p.5068, 1997.
DOI : 10.1021/ma9618639

T. K. Chen, T. S. Shieh, and J. Y. Chui, Studies on the First DSC Endotherm of Polyurethane Hard Segment Based on 4,4???-Diphenylmethane Diisocyanate and 1,4-Butanediol, Macromolecules, vol.31, issue.4, p.1312, 1998.
DOI : 10.1021/ma970913m

J. T. Koberstein, A. F. Galambos, and L. M. Leung, Compression-molded polyurethane block copolymers. 1. Microdomain morphology and thermomechanical properties, Macromolecules, vol.25, issue.23, p.6195, 1992.
DOI : 10.1021/ma00049a017

URL : http://www.dtic.mil/get-tr-doc/pdf?AD=ADA220160

J. Ledru, J. M. Saiter, J. Grenet, B. Youssef, F. Burel et al., Thermal characterization of polyurethane acrylate resins, Journal of Thermal Analysis and Calorimetry, vol.58, issue.1, p.13, 1999.
DOI : 10.1023/A:1010175132568

G. Ström, M. Fredriksson, and P. Stenius, Contact angles, work of adhesion, and interfacial tensions at a dissolving Hydrocarbon surface, Journal of Colloid and Interface Science, vol.119, issue.2, p.352, 1987.
DOI : 10.1016/0021-9797(87)90280-3

S. Giasson, Chapitre 1 : Surfaces et interfaces : Notions fondamentales CHM 3404, Surfaces, interfaces et colloïdes, p.15, 2004.

R. N. Wenzel, RESISTANCE OF SOLID SURFACES TO WETTING BY WATER, Industrial & Engineering Chemistry, vol.28, issue.8, p.988, 1936.
DOI : 10.1021/ie50320a024

C. A. Baxter and S. , Wetting of porous surfaces. Transaction of the Faraday Society, p.546, 1944.

B. Sreedhar, D. K. Chattopadhyay, and V. Swapna, Thermal and surface characterization of polyurethane???urea clay nanocomposite coatings, Journal of Applied Polymer Science, vol.93, issue.3, p.2393, 2006.
DOI : 10.1002/app.23140

B. D. Ratner, D. Briggs, M. J. Hearn, S. C. Yoon, and P. G. Edelman, ESCA and static SIMS studies of polyurethane surfaces, In Surface characterization of biomaterials, 1988.

T. P. Gandek, T. A. Hatton, and R. C. Reid, Batch extraction with reaction: phenolic antioxidant migration from polyolefins to water. 2. Experimental results and discussion, Industrial & Engineering Chemistry Research, vol.28, issue.7, p.1036, 1989.
DOI : 10.1021/ie00091a024

A. D. Schwope, D. E. Till, D. J. Ehntholt, K. R. Sidman, R. H. Whelan et al., Migration of BHT and Irganox 1010 from low-density polyethylene (LDPE) to foods and food-simulating liquids, Food and Chemical Toxicology, vol.25, issue.4, p.317, 1987.
DOI : 10.1016/0278-6915(87)90129-3

A. D. Schwope, D. E. Till, D. J. Ehntholt, K. R. Sidman, R. H. Whelan et al., Migration of Irganox 1010 from ethylene-vinyl acétate films to foods and food-simulating liquids Food and Chemical Toxicology, p.327, 1987.

D. J. Wilson, N. P. Rhodes, and R. L. Williams, Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system, Biomaterials, vol.24, issue.28, p.5069, 2003.
DOI : 10.1016/S0142-9612(03)00423-X

J. Chai, F. Lu, B. Li, and D. Y. Kwok, Wettability Interpretation of Oxygen Plasma Modified Poly(methyl methacrylate), Langmuir, vol.20, issue.25, p.10919, 2004.
DOI : 10.1021/la048947s

P. Esena, C. Riccardi, S. Zanini, M. Tontini, G. Poletti et al., Surface modification of PET film by a DBD devce at atmospheric pressure. surface and coating technology, p.664, 2005.

L. Carrino, G. Moroni, and W. Polini, Cold plasma treatment of PP surface: a study on wettability and adhesion. journal of materials processing technology, p.373, 2002.

S. A. Mitchell, M. R. Davidson, and R. H. Bradley, Improved cellular adhesion to acetone plasma modified polystyrene surface. journal of Colloid and interface science, p.122, 2005.
DOI : 10.1016/j.jcis.2004.08.049

S. Lerouge, C. Guignot, M. Tabrizian, D. Ferrier, N. Yagoubi et al., Plasma-based sterilization: Effect on surface and bulk properties and hydrolytic stability of reprocessed polyurethane electrophysiology catheters, Journal of Biomedical Materials Research, vol.71, issue.4, p.774, 2000.
DOI : 10.1002/1097-4636(20001215)52:4<774::AID-JBM23>3.0.CO;2-O

C. Baquey, F. Palumbo, M. C. Porte-durrieu, G. Legeay, A. Tressaud et al., Plasma treatment of expanded PTFE offers a way to a biofunctionalization of its surface. Nuclear Instruments and Methods in Physics Research, p.255, 1999.

P. K. Chu, J. Y. Chen, L. P. Wang, and N. Huang, Plasma-surface modification of biomaterials, Materials Science and Engineering: R: Reports, vol.36, issue.5-6, p.143, 2002.
DOI : 10.1016/S0927-796X(02)00004-9

K. Gorna and S. Gogolewski, Molecular stability, mechanical properties, surface characteristics and sterility of biodegradable polyurethanes treated with low-temperature plasma, Polymer Degradation and Stability, vol.79, issue.3, p.475, 2003.
DOI : 10.1016/S0141-3910(02)00363-4

A. J. Wagner, D. H. Fairbrother, and F. Reniers, A Comparison of PE Surfaces Modified by Plasma Generated Neutral Nitrogen Species and Nitrogen Ions. Plasmas and Polymers, p.119, 2003.

B. D. Ratner and R. W. Paynter, Polyurethane surfaces: the importance of molecular weight distribution, bulk chemistry and casting conditions, Polyurethanes in biomedical engineering. Planck H., Egbers G. and Syré I, p.41, 1984.

D. Briggs, Analysis and chemical imaging of polymer surfaces by SIMS, In polymer surfaces and interfaces. Feast W, p.33, 1987.

L. J. Gerenser, XPS studies of in situ plasma-modified polymer surfaces, Journal of Adhesion Science and Technology, vol.7, issue.10, p.1019, 1993.
DOI : 10.1163/156856193X00556

L. J. Gerenser, X-Ray photoemission study of plasma modified polyethylene surfaces, Journal of Adhesion Science and Technology, vol.11, issue.1, p.303, 1987.
DOI : 10.1163/156856187X00319

R. Foerch, J. Izawa, and G. Spears, A comparative study of the effects of remote nitrogen plasma, remote oxygen plasma, and corona discharge treatments on the surface properties of polyethylene, Journal of Adhesion Science and Technology, vol.14, issue.7, p.549, 1991.
DOI : 10.1163/156856191X00747

R. Wilson and B. C. , Evaluation of the Plazlyte Sterilization System at the Richmond Hospital, J Healthc Mater Manage, vol.12, issue.4, p.37, 1994.

L. J. Gerenser, J. M. Grace, G. Apai, and P. M. Thompson, Surface chemistry of nitrogen plasma-treated poly(ethylene-2,6-naphthalate): XPS, HREELS and static SIMS analysis, Surface and Interface Analysis, vol.109, issue.1, p.12, 2000.
DOI : 10.1002/(SICI)1096-9918(200001)29:1<12::AID-SIA687>3.0.CO;2-7

D. Briggs, D. G. Rance, C. R. Kendall, and A. R. Blythe, Surface modification of poly(ethylene terephthalate) by electrical discharge treatment, Polymer, vol.21, issue.8, p.895, 1980.
DOI : 10.1016/0032-3861(80)90244-X

H. Yasuda, E. J. Charlson, E. M. Charlson, T. Yasuda, M. Miyama et al., Dynamics of surface property change in response to changes in environmental conditions, Langmuir, vol.7, issue.10, p.2394, 1991.
DOI : 10.1021/la00058a070

T. Yasuda, T. Okuno, and H. Yasuda, Contact Angle of Water on Polymer Surfaces, Langmuir, vol.10, issue.7, p.2435, 1994.
DOI : 10.1021/la00019a068

T. Yasuda, M. Miyama, and H. Yasuda, Dynamics of the surface configuration change of polymers in response to changes in environmental conditions. 2. Comparison of changes in air and in liquid water, Langmuir, vol.8, issue.5, p.1425, 1992.
DOI : 10.1021/la00041a030

D. Walter, Structure of water near solid interfaces, Industrial and Engineering Chemistry, vol.61, issue.11, p.10, 1969.

S. R. Fisher and F. Yates, Distribution of t, In Statistical tables for biological, agricultural and medical research. Sixth, Atomic Energy Commission of Syria Damascus ? P.O. Box 6091, 1963.