S. P. Badwal, Solid State Ionics, pp.23-32, 1992.

S. P. Badwal, F. T. Ciacchi, S. Rajendran, and J. Drennan, An investigation of conductivity, microstructure and stability of electrolyte compositions in the system 9mol% (Sc2O3???Y2O3)???ZrO2(Al2O3), Solid State Ionics, vol.109, issue.3-4, pp.167-186, 1998.
DOI : 10.1016/S0167-2738(98)00079-4

S. Barison, M. Fabrizio, C. Mortalò, P. Antonucci, V. Modafferi et al., Novel Ru/La0.75Sr0.25Cr0.5Mn0.5O3-?? catalysts for propane reforming in IT-SOFCs, Solid State Ionics, vol.181, issue.5-7, pp.285-291, 2010.
DOI : 10.1016/j.ssi.2010.01.002

N. M. Beekmans and L. Heyne, Correlation between impedance, microstructure and composition of calcia-stabilized zirconia, Electrochimica Acta, vol.21, issue.4, pp.303-310, 1976.
DOI : 10.1016/0013-4686(76)80024-2

M. Boaro, V. Modafferi, A. Pappacena, J. Llorca, V. Baglio et al., Comparison between Ni???Rh/gadolinia doped ceria catalysts in reforming of propane for anode implementations in intermediate solid oxide fuel cells, Journal of Power Sources, vol.195, issue.2, pp.649-661, 2010.
DOI : 10.1016/j.jpowsour.2009.08.006

F. Boulc-'h, L. Dessemond, and E. Djurado, Solid State Ionics, pp.154-155, 2002.

S. Boulfrad, Influence de la nanostructure sur les propriétés électriques et la stabilité de zircones à l'état massif, 2007.

M. M. Bucko, Ionic conductivity of CaO???Y2O3???ZrO2 materials with constant oxygen vacancy concentration, Journal of the European Ceramic Society, vol.24, issue.6, pp.1305-1308, 2004.
DOI : 10.1016/S0955-2219(03)00502-8

C. R. Catlow, Transport in doped fluorite oxides, Solid State Ionics, vol.12, pp.67-73, 1984.
DOI : 10.1016/0167-2738(84)90131-0

P. K. Cheekatamarla, C. M. Finnerty, and J. Cai, Internal reforming of hydrocarbon fuels in tubular solid oxide fuel cells, International Journal of Hydrogen Energy, vol.33, issue.7, pp.1853-1858, 2008.
DOI : 10.1016/j.ijhydene.2008.02.004

K. Chen, Z. Lu, N. Ai, X. Chen, J. Hu et al., Effect of SDC-impregnated LSM cathodes on the performance of anode-supported YSZ films for SOFCs, Journal of Power Sources, vol.167, issue.1, pp.84-89, 2007.
DOI : 10.1016/j.jpowsour.2007.01.088

P. Chinda, S. Chanchaona, P. Brault, and W. Weshsatol, A planar anode-supported Solid Oxide Fuel Cell model with internal reforming of natural gas, The European Physical Journal Applied Physics, vol.54, issue.2, pp.23405-23420, 2011.
DOI : 10.1051/epjap/2011100145

URL : https://hal.archives-ouvertes.fr/hal-00594667

D. Souza, S. Visco, S. J. De-jonghe, and L. C. , Thin-film solid oxide fuel cell with high performance at low-temperature, Solid State Ionics, vol.98, issue.1-2, pp.57-61, 1997.
DOI : 10.1016/S0167-2738(96)00525-5

D. W. Dees, T. D. Claar, T. E. Easler, D. C. Fee, and F. C. Mrazek, Conductivity of Porous Ni???ZrO[sub 2]-Y[sub 2]O[sub 3] Cermets, Journal of The Electrochemical Society, vol.134, issue.9, pp.2141-2146, 1987.
DOI : 10.1149/1.2100839

S. Diethelm and J. Van-herle, Ethanol internal steam reforming in intermediate temperature solid oxide fuel cell, Journal of Power Sources, vol.196, issue.17, pp.7355-7362, 2011.
DOI : 10.1016/j.jpowsour.2010.11.063

E. Djurado, F. Boulc-'h, G. Dezanneau, and P. Bouvier, Quantification of Chemical Pressure in Doped Nanostructured Zirconia Ceramics, The Journal of Physical Chemistry B, vol.107, issue.33, pp.8321-8326, 2003.
DOI : 10.1021/jp0341220

URL : https://hal.archives-ouvertes.fr/hal-00417993

A. J. Feighery and J. T. Irvine, Effect of alumina additions upon electrical properties of 8 mol.% yttria-stabilised zirconia, Solid State Ionics, vol.121, issue.1-4, pp.209-216, 1999.
DOI : 10.1016/S0167-2738(99)00015-6

J. W. Fergus, Electrolytes for solid oxide fuel cells, Journal of Power Sources, vol.162, issue.1, pp.30-40, 2006.
DOI : 10.1016/j.jpowsour.2006.06.062

C. M. Finnerty, N. J. Coe, R. H. Cunningham, and R. M. Ormerod, Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane, Catalysis Today, vol.46, issue.2-3, pp.137-145, 1998.
DOI : 10.1016/S0920-5861(98)00335-6

J. Fleig, H. L. Tuller, and J. Maiera, Electrodes and electrolytes in micro-SOFCs: a discussion of geometrical constraints, Solid State Ionics, vol.174, issue.1-4, pp.261-270, 2004.
DOI : 10.1016/j.ssi.2004.07.035

C. Gaudillère, P. Vernoux, C. Mirodatos, G. Caboche, and D. Farrusseng, Screening of ceria-based catalysts for internal methane reforming in low temperature SOFC, Catalysis Today, vol.157, issue.1-4, pp.263-269, 2010.
DOI : 10.1016/j.cattod.2010.02.062

I. R. Gibson, G. P. Dransfield, and J. T. Irvine, Influence of yttria concentration upon electrical properties and susceptibility to ageing of yttria-stabilised zirconias, Journal of the European Ceramic Society, vol.18, issue.6, pp.661-667, 1998.
DOI : 10.1016/S0955-2219(97)00173-8

K. Girona, Modélisation et validation expérimentale du comportement électrochimique d'une pile à combustible SOFC en reformage interne de biocombustibles, 2009.

K. Gmucova, M. Hartmanova, and F. Kundracik, Charge distribution at interface and in bulk of YSZ thin films deposited on Si substrate, Ceramics International, vol.32, issue.2, pp.105-109, 2006.
DOI : 10.1016/j.ceramint.2005.01.004

J. B. Goodenough, Solid State Ionics, pp.17-25, 1997.

R. J. Gorte, S. Park, J. M. Vohs, and C. Wang, Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-Oxide Fuel Cell, Advanced Materials, vol.12, issue.19, pp.1465-1469, 2000.
DOI : 10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9

R. J. Gorte, H. Kim, and J. M. Vohs, Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbon, Journal of Power Sources, vol.106, issue.1-2, pp.10-15, 2002.
DOI : 10.1016/S0378-7753(01)01021-7

. R. Grovew, On a Gaseous Voltaic Battery, Philosophical Magazine and Journal of Science, vol.XXI, pp.417-420, 1842.

X. Guo, Size dependent grain-boundary conductivity in doped zirconia, Computational Materials Science, vol.20, issue.2, pp.168-176, 2001.
DOI : 10.1016/S0927-0256(00)00174-9

X. Guo and J. Maier, Grain Boundary Blocking Effect in Zirconia: A Schottky Barrier Analysis, Journal of The Electrochemical Society, vol.148, issue.3, p.121, 2001.
DOI : 10.1149/1.1348267

H. A. Hamedani, K. Dahmen, D. Li, H. Peydaye-saheli, H. Garmestani et al., Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis, Materials Science and Engineering: B, vol.153, issue.1-3, pp.1-9, 2008.
DOI : 10.1016/j.mseb.2008.07.006

A. Hammou, Solid Oxide Fuel Cells Advances in Electrochemical Science and Engineering, pp.87-139, 1992.

H. Hayashi, M. Kanoh, C. Quan, H. Inaba, S. Wang et al., Thermal expansion of Gd-doped ceria and reduced ceria, Solid State Ionics, vol.132, issue.3-4, pp.227-233, 2000.
DOI : 10.1016/S0167-2738(00)00646-9

H. He, J. M. Vohs, and R. J. Gorte, Effect of Synthesis Conditions on the Performance of Cu-CeO[sub 2]-YSZ Anodes in SOFCs, Journal of The Electrochemical Society, vol.150, issue.11, pp.1470-1475, 2003.
DOI : 10.1149/1.1614268

K. Huang, M. Feng, J. B. Goodenough, and M. Schmerling, Characterization of Sr-Doped LaMnO[sub 3] and LaCoO[sub 3] as Cathode Materials for a Doped LaGaO[sub 3] Ceramic Fuel Cell, Journal of The Electrochemical Society, vol.143, issue.11, pp.3630-3636, 1996.
DOI : 10.1149/1.1837262

P. N. Huang and A. Petric, Superior Oxygen Ion Conductivity of Lanthanum Gallate Doped with Strontium and Magnesium, Journal of The Electrochemical Society, vol.143, issue.5, pp.1644-1648, 1996.
DOI : 10.1149/1.1836692

T. Huang, C. Wu, and C. Wang, Fuel processing in direct propane solid oxide fuel cell and carbon dioxide reforming of propane over Ni???YSZ, Fuel Processing Technology, vol.92, issue.8, pp.1611-1616, 2011.
DOI : 10.1016/j.fuproc.2011.04.007

H. Inaba and H. Tagawa, Solid State Ionics, pp.1-16, 1996.

N. X. Jiang, E. D. Wachsman, and S. H. Jung, A higher conductivity Bi2O3-based electrolyte, Solid State Ionics, vol.150, issue.3-4, pp.347-353, 2002.
DOI : 10.1016/S0167-2738(02)00291-6

C. Jin, C. H. Yang, F. Zhao, A. Coffin, and F. Chen, Direct-methane solid oxide fuel cells with Cu1.3Mn1.7O4 spinel internal reforming layer, Electrochemistry Communications, vol.12, issue.10, pp.1450-1452, 2010.
DOI : 10.1016/j.elecom.2010.08.006

C. Jin, C. H. Yang, H. Zheng, and F. Chen, Intermediate temperature solid oxide fuel cells with Cu1.3Mn1.7O4 internal reforming layer, Journal of Power Sources, vol.201, pp.66-71, 2012.
DOI : 10.1016/j.jpowsour.2011.10.107

J. H. Joo and G. M. Choi, Electrical conductivity of YSZ film grown by pulsed laser deposition, Solid State Ionics, vol.177, issue.11-12, pp.1053-1057, 2006.
DOI : 10.1016/j.ssi.2006.04.008

A. V. Joshi, J. J. Steppan, D. M. Taylor, and S. Elangovan, Solid Electrolyte Materials, Devices, and Applications, Journal of Electroceramics, vol.149, issue.9, pp.619-625, 2004.
DOI : 10.1007/s10832-004-5168-x

K. S. Kang, C. H. Kim, W. C. Cho, K. K. Bae, S. W. Woo et al., Reduction characteristics of CuFe2O4 and Fe3O4 by methane; CuFe2O4 as an oxidant for two-step thermochemical methane reforming, International Journal of Hydrogen Energy, vol.33, issue.17, pp.4560-4568, 2008.
DOI : 10.1016/j.ijhydene.2008.05.054

T. Kenjo and M. Nishiya, LaMnO3 air cathodes containing ZrO2 electrolyte for high temperature solid oxide fuel cells, Solid State Ionics, vol.57, issue.3-4, pp.295-302, 1992.
DOI : 10.1016/0167-2738(92)90161-H

V. V. Kharton, F. M. Marques, and A. Atkinson, Transport properties of solid oxide electrolyte ceramics: a brief review, Solid State Ionics, vol.174, issue.1-4, pp.135-149, 2004.
DOI : 10.1016/j.ssi.2004.06.015

J. A. Kilner and R. J. Brook, A study of oxygen ion conductivity in doped non-stoichiometric oxides, Solid State Ionics, vol.6, issue.3, pp.237-252, 1982.
DOI : 10.1016/0167-2738(82)90045-5

J. Kim, A. V. Virkar, K. Fung, K. Mehta, and S. C. Singhal, Polarization Effects in Intermediate Temperature, Anode-Supported Solid Oxide Fuel Cells, Journal of The Electrochemical Society, vol.146, issue.1, pp.69-78, 1999.
DOI : 10.1149/1.1391566

H. Kim, S. Park, J. M. Vohs, and R. J. Gorte, Direct Oxidation of Liquid Fuels in a Solid Oxide Fuel Cell, Journal of The Electrochemical Society, vol.148, issue.7, pp.693-695, 2001.
DOI : 10.1149/1.1374216

J. M. Klein, Y. Bultel, S. Georges, and M. Pons, Modeling of a SOFC fuelled by methane: From direct internal reforming to gradual internal reforming, Chemical Engineering Science, vol.62, issue.6, pp.1636-1649, 2007.
DOI : 10.1016/j.ces.2006.11.034

URL : https://hal.archives-ouvertes.fr/hal-00196340

. Thorstensen, European Solid Oxide Fuel Cell Forum, p.479, 1996.

I. Kosacki, C. M. Rouleau, P. F. Becher, J. Bentley, and D. H. Lowndes, Nanoscale effects on the ionic conductivity in highly textured YSZ thin films, Solid State Ionics, vol.176, issue.13-14, pp.1319-1326, 2005.
DOI : 10.1016/j.ssi.2005.02.021

G. C. Kostogloudis and C. Ftikos, Properties of A-site-deficient La0.6Sr0.4Co0.2Fe0.8O3?????-based perovskite oxides, Solid State Ionics, vol.126, issue.1-2, pp.143-151, 1999.
DOI : 10.1016/S0167-2738(99)00230-1

G. C. Kostogloudis, G. Tsiniarakis, and C. Ftikos, Chemical reactivity of perovskite oxide SOFC cathodes and yttria stabilized zirconia, Solid State Ionics, vol.135, issue.1-4, pp.529-535, 2000.
DOI : 10.1016/S0167-2738(00)00433-1

J. Lachaize, Etude des stratégies et des structures de commande pour le pilotage des systèmes énergétiques à piles à combustibles (PAC) destinés à la traction, 2004.

A. Lanzini and P. Leone, Experimental investigation of direct internal reforming of biogas in solid oxide fuel cells, International Journal of Hydrogen Energy, vol.35, issue.6, pp.2463-2476, 2010.
DOI : 10.1016/j.ijhydene.2009.12.146

C. J. Laycock, J. Z. Staniforth, and R. M. Ormerod, Biogas as a fuel for solid oxide fuel cells and synthesis gas production: effects of ceria-doping and hydrogen sulfide on the performance of nickel-based anode materials, Dalton Transactions, vol.122, issue.20, pp.5494-5504, 2011.
DOI : 10.1039/c0dt01373k

Y. Lin, Z. Zhan, J. Liu, and S. A. Barnett, Direct operation of solid oxide fuel cells with methane fuel, Solid State Ionics, vol.176, issue.23-24, pp.1827-1835, 2005.
DOI : 10.1016/j.ssi.2005.05.008

Y. Lin, Z. Zhan, and S. A. Barnett, Improving the stability of direct-methane solid oxide fuel cells using anode barrier layers, Journal of Power Sources, vol.158, issue.2, pp.1313-1316, 2006.
DOI : 10.1016/j.jpowsour.2005.09.060

J. Liu and S. A. Barnett, Operation of anode-supported solid oxide fuel cells on methane and natural gas, Solid State Ionics, vol.158, issue.1-2, pp.11-16, 2003.
DOI : 10.1016/S0167-2738(02)00769-5

L. Faro, M. , L. Rosa, D. Frontera, P. Antonucci et al., Propane-fed Solid Oxide Fuel Cell Based on a Composite Ni-La-CGO Anode Catalyst, Catalysis Letters, vol.177, issue.16, pp.57-64, 2010.
DOI : 10.1007/s10562-010-0295-2

L. Faro, M. Stassi, A. Antonucci, A. Modafferi, V. Frontera et al., Direct utilization of methanol in solid oxide fuel cells: An electrochemical and catalytic study, International Journal of Hydrogen Energy, vol.36, issue.16, pp.9977-9986, 2011.
DOI : 10.1016/j.ijhydene.2011.05.053

A. Mai, V. A. Haanappel, S. Uhlenbruck, F. Tietz, and D. Stöver, Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells, Solid State Ionics, vol.176, issue.15-16, pp.1341-1350, 2005.
DOI : 10.1016/j.ssi.2005.03.009

C. Mallon and K. Kendall, Sensitivity of nickel cermet anodes to reduction conditions, Journal of Power Sources, vol.145, issue.2, pp.154-160, 2005.
DOI : 10.1016/j.jpowsour.2005.02.043

M. Mogensen, N. M. Sammes, and G. A. Tompsett, Physical, chemical and electrochemical properties of pure and doped ceria, Solid State Ionics, vol.129, issue.1-4, pp.63-94, 2000.
DOI : 10.1016/S0167-2738(99)00318-5

P. Mondal, A. Klein, W. Jaergermann, and H. Hahn, Enhanced specific grain boundary conductivity in nanocrystalline Y2O3-stabilized zirconia, Solid State Ionics, vol.118, issue.3-4, pp.331-339, 1999.
DOI : 10.1016/S0167-2738(98)00452-4

M. Mori, G. M. Tompsett, N. M. Sammes, E. Suda, and Y. Takeda, Compatibility of GdxTi2O7 pyrochlores (1.72???x???2.0) as electrolytes in high-temperature solid oxide fuel cells, Solid State Ionics, vol.158, issue.1-2, pp.79-90, 2003.
DOI : 10.1016/S0167-2738(02)00761-0

H. Mori, C. Wen, J. Otomo, K. Eguchi, and H. Takahashi, Investigation of the interaction between NiO and yttria-stabilized zirconia (YSZ) in the NiO/YSZ composite by temperature-programmed reduction technique, Applied Catalysis A: General, vol.245, issue.1, pp.79-85, 2003.
DOI : 10.1016/S0926-860X(02)00634-8

E. P. Murray, T. Tsai, and S. A. Barnett, Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study, Solid State Ionics, vol.110, issue.3-4, pp.235-243, 1998.
DOI : 10.1016/S0167-2738(98)00142-8

S. Park, R. Craciun, J. M. Vohs, and R. J. Gorte, Direct Oxidation of Hydrocarbons in a Solid Oxide Fuel Cell: I. Methane Oxidation, Journal of The Electrochemical Society, vol.146, issue.10, pp.3603-3605, 1999.
DOI : 10.1149/1.1392521

A. Petric, P. Huang, and F. Tietz, Evaluation of La???Sr???Co???Fe???O perovskites for solid oxide fuel cells and gas separation membranes, Solid State Ionics, vol.135, issue.1-4, pp.719-725, 2000.
DOI : 10.1016/S0167-2738(00)00394-5

J. M. Ralph, C. Rossignol, and R. Kumar, Cathode Materials for Reduced-Temperature SOFCs, Journal of The Electrochemical Society, vol.150, issue.11, pp.1518-1522, 2003.
DOI : 10.1149/1.1617300

URL : https://hal.archives-ouvertes.fr/hal-00418034

A. Rivera, J. Santamaria, and C. Leon, Electrical conductivity relaxation in thin-film yttria-stabilized zirconia, Applied Physics Letters, vol.78, issue.5, pp.610-612, 2001.
DOI : 10.1063/1.1343852

N. M. Sammes, G. A. Tompsett, H. Nafe, and F. Aldinger, Bismuth based oxide electrolytes??? structure and ionic conductivity, Journal of the European Ceramic Society, vol.19, issue.10, pp.1801-1826, 1999.
DOI : 10.1016/S0955-2219(99)00009-6

A. Sauvet and J. Fouletier, Catalytic properties of new anode materials for solid oxide fuel cells operated under methane at intermediary temperature, Journal of Power Sources, vol.101, issue.2, pp.259-266, 2001.
DOI : 10.1016/S0378-7753(01)00763-7

Y. Shiratori, T. Ijichi, T. Oshima, and K. Sasaki, Internal reforming SOFC running on biogas, International Journal of Hydrogen Energy, vol.35, issue.15, pp.7905-7912, 2010.
DOI : 10.1016/j.ijhydene.2010.05.064

E. Siebert, A. Hammouche, and M. Kleitz, Impedance spectroscopy analysis of La1 ??? xSritxMnO3-yttria-stabilized zirconia electrode kinetics, Electrochimica Acta, vol.40, issue.11, pp.1741-1753, 1995.
DOI : 10.1016/0013-4686(94)00361-4

S. C. Singhal, Science and Technology of Solid-Oxide Fuel Cells, MRS Bulletin, vol.80, issue.03, pp.16-21, 2000.
DOI : 10.1557/mrs2000.13

D. Skarmoutsos, A. Tsoga, A. Naoumidis, and P. Nikolopoulos, 5 mol% TiO2-doped Ni???YSZ anode cermets for solid oxide fuel cells, Solid State Ionics, vol.135, issue.1-4, pp.439-444, 2000.
DOI : 10.1016/S0167-2738(00)00392-1

C. Su, R. Ran, W. Wang, and Z. Shao, Coke formation and performance of an intermediate-temperature solid oxide fuel cell operating on dimethyl ether fuel, Journal of Power Sources, vol.196, issue.4, pp.1967-1974, 2011.
DOI : 10.1016/j.jpowsour.2010.10.011

H. Sumi, K. Ukai, Y. Mizutani, H. Mori, C. J. Wen et al., Performance of nickel?scandia-stabilized zirconia cermet anodes for SOFCs in 3% HO?CH, Solid State Ionics, vol.174, issue.1-4, pp.151-156, 2004.
DOI : 10.1016/j.ssi.2004.06.016

P. Vernoux, J. Guindet, and M. Kleitz, Gradual Internal Methane Reforming in Intermediate-Temperature Solid-Oxide Fuel Cells, Journal of The Electrochemical Society, vol.145, issue.10, pp.3487-3492, 1998.
DOI : 10.1149/1.1838832

H. B. Wang, C. R. Xia, G. Y. Meng, and D. K. Peng, Deposition and characterization of YSZ thin films by aerosol-assisted CVD, Materials Letters, vol.44, issue.1, pp.23-28, 2000.
DOI : 10.1016/S0167-577X(99)00291-8

W. Wang, C. Su, Y. Wu, R. Ran, and Z. Shao, A comprehensive evaluation of a Ni???Al2O3 catalyst as a functional layer of solid-oxide fuel cell anode, Journal of Power Sources, vol.195, issue.2, pp.402-411, 2010.
DOI : 10.1016/j.jpowsour.2009.07.053

E. Wanzenberg, F. Tietz, D. Kek, P. Panjan, and D. Stöver, Influence of electrode contacts on conductivity measurements of thin YSZ electrolyte films and the impact on solid oxide fuel cells, Solid State Ionics, vol.164, issue.3-4, pp.121-129, 2003.
DOI : 10.1016/j.ssi.2003.08.053

H. Yahiro, Y. Eguchi, K. Eguchi, and H. Arai, Oxygen ion conductivity of the ceria-samarium oxide system with fluorite structure, Journal of Applied Electrochemistry, vol.5, issue.4, pp.527-531, 1988.
DOI : 10.1007/BF01022246

H. Yahiro, K. Eguchi, and H. Arai, Electrical properties and reducibilities of ceria-rare earth oxide systems and their application to solid oxide fuel cell, Solid State Ionics, vol.36, issue.1-2, pp.71-75, 1989.
DOI : 10.1016/0167-2738(89)90061-1

I. Yasuda, Y. Matsuzaki, T. Yamakawa, and T. Koyama, Electrical conductivity and mechanical properties of alumina-dispersed doped lanthanum gallates, Solid State Ionics, vol.135, issue.1-4, pp.381-388, 2000.
DOI : 10.1016/S0167-2738(00)00473-2

H. Yokokawa, N. Sakai, T. Kawada, and M. Dokiya, Chemical Thermodynamic Considerations in Sintering of LaCrO[sub 3]-Based Perovskites, Journal of The Electrochemical Society, vol.138, issue.4, pp.1018-1027, 1991.
DOI : 10.1149/1.2085708

Z. Zhan and S. A. Barnett, An Octane-Fueled Solid Oxide Fuel Cell, Science, vol.308, issue.5723, pp.844-847, 2005.
DOI : 10.1126/science.1109213

Z. Zhan, Y. Lin, M. Pillai, I. Kim, and S. A. Barnett, High-rate electrochemical partial oxidation of methane in solid oxide fuel cells, Journal of Power Sources, vol.161, issue.1, pp.460-465, 2006.
DOI : 10.1016/j.jpowsour.2006.04.139

Z. Zhan and S. A. Barnett, Operation of ceria-electrolyte solid oxide fuel cells on iso-octane???air fuel mixtures, Journal of Power Sources, vol.157, issue.1, pp.422-429, 2006.
DOI : 10.1016/j.jpowsour.2005.08.008

X. D. Zhou, B. Scarfino, and H. U. Anderson, Electrical conductivity and stability of Gd-doped ceria/Y-doped zirconia ceramics and thin films, Solid State Ionics, vol.175, issue.1-4, pp.19-22, 2004.
DOI : 10.1016/j.ssi.2004.09.040

M. Arab-pour-yazdi, P. Briois, S. Georges, and A. Billard, Electrical and structural investigations of perovskite structure reactively sputter deposited coatings, Solid State Ionics, vol.180, issue.23-25, pp.1246-1251, 2009.
DOI : 10.1016/j.ssi.2009.07.008

M. Arab-pour-yazdi, P. Briois, S. Georges, A. L. Shaula, A. Cavaleiro et al., Comparison of Structural and Electrical Properties of Barium Zirconate Pellets and Thin Films, Journal of The Electrochemical Society, vol.157, issue.11, pp.1582-1587, 2010.
DOI : 10.1149/1.3482032

N. Bailly, S. Georges, and E. Djurado, Solid State Ionics, pp.222-223, 2012.

N. Bailly, E. Djurado, and S. Georges, Electrical Characterization of Thin Films by an Original Micro-Electrode Calibration Method, Electrochemical and Solid-State Letters, vol.15, issue.4, pp.16-18, 2012.
DOI : 10.1149/2.029204esl

W. Balachandran, P. Miao, and P. Xiao, Electrospray of fine droplets of ceramic suspensions for thin-film preparation, Journal of Electrostatics, vol.50, issue.4, pp.249-263, 2001.
DOI : 10.1016/S0304-3886(00)00039-5

C. Bernay, A. Ringuedé, P. Colomban, D. Lincot, and M. Cassir, Yttria-doped zirconia thin films deposited by atomic layer deposition ALD: a structural, morphological and electrical characterisation, Journal of Physics and Chemistry of Solids, vol.64, issue.9-10, pp.1761-1770, 2003.
DOI : 10.1016/S0022-3697(03)00105-7

S. Boulfrad, Influence de la nanostructure sur les propriétés électriques et la stabilité de zircones à l'état massif, p.27, 2007.

C. Brahim, A. Ringuedé, E. Gourba, M. Cassir, A. Billard et al., Electrical properties of thin bilayered YSZ/GDC SOFC electrolyte elaborated by sputtering, Journal of Power Sources, vol.156, issue.1, pp.45-49, 2006.
DOI : 10.1016/j.jpowsour.2005.08.017

URL : https://hal.archives-ouvertes.fr/hal-00126134

M. Cassir, F. Goubin, C. Bernay, P. Vernoux, and D. Lincot, Synthesis of ZrO2 thin films by atomic layer deposition: growth kinetics, structural and electrical properties, Applied Surface Science, vol.193, issue.1-4, pp.120-128, 2002.
DOI : 10.1016/S0169-4332(02)00247-7

G. Chiodelli, L. Malavasi, V. Massarotti, P. Mustarelli, and E. Quartarone, Synthesis and characterization of Ce0.8Gd0.2O2???y polycrystalline and thin film materials, Solid State Ionics, vol.176, issue.17-18, pp.1505-1512, 2005.
DOI : 10.1016/j.ssi.2005.03.017

D. Souza, S. Visco, J. S. De-jonghe, and L. C. , Thin-film solid oxide fuel cell with high performance at low-temperature, Solid State Ionics, vol.98, issue.1-2, pp.57-61, 1997.
DOI : 10.1016/S0167-2738(96)00525-5

J. Fleig, H. L. Tuller, and J. Maiera, Electrodes and electrolytes in micro-SOFCs: a discussion of geometrical constraints, Solid State Ionics, vol.174, issue.1-4, pp.261-270, 2004.
DOI : 10.1016/j.ssi.2004.07.035

A. M. Gañan-calvo, J. Davila, and A. Barrero, Current and droplet size in the electrospraying of liquids. Scaling laws, Journal of Aerosol Science, vol.28, issue.2, pp.249-275, 1997.
DOI : 10.1016/S0021-8502(96)00433-8

G. Garcia, J. Caro, J. Santiso, J. A. Pardo, A. Figueras et al., Pulsed Injection MOCVD of YSZ Thin Films onto Dense and Porous Substrates, Chemical Vapor Deposition, vol.9, issue.5, pp.279-284, 2003.
DOI : 10.1002/cvde.200306253

B. Hobein, F. Tietz, D. Stover, and E. W. Kreutz, Pulsed laser deposition of yttria stabilized zirconia for solid oxide fuel cell applications, Journal of Power Sources, vol.105, issue.2, pp.239-242, 2002.
DOI : 10.1016/S0378-7753(01)00945-4

A. B. Hütter, P. Reinhard, J. L. Rupp, and L. J. Gauckler, The impact of etching during microfabrication on the microstructure and the electrical conductivity of gadolinia-doped ceria thin films, Journal of Power Sources, vol.196, issue.15, pp.6070-6078, 2011.
DOI : 10.1016/j.jpowsour.2011.03.082

A. O. Isenberg, Solid State Ionics, pp.431-437, 1981.

A. Jaworek and A. T. Sobczyk, Electrospraying route to nanotechnology: An overview, Journal of Electrostatics, vol.66, issue.3-4, pp.197-219, 2008.
DOI : 10.1016/j.elstat.2007.10.001

J. H. Joo and G. M. Choi, Electrical conductivity of YSZ film grown by pulsed laser deposition, Solid State Ionics, vol.177, issue.11-12, pp.1053-1057, 2006.
DOI : 10.1016/j.ssi.2006.04.008

J. H. Joo and G. M. Choi, Electrical conductivity of thin film ceria grown by pulsed laser deposition, Journal of the European Ceramic Society, vol.27, issue.13-15, pp.4273-4277, 2007.
DOI : 10.1016/j.jeurceramsoc.2007.02.135

D. Kek, P. Panjan, E. Wanzenberg, and J. Jamnik, Electrical and microstructural investigations of cermet anode/YSZ thin film systems, Journal of the European Ceramic Society, vol.21, issue.10-11, pp.1861-1865, 2001.
DOI : 10.1016/S0955-2219(01)00131-5

K. Kerman, B. Lai, and S. Ramanathan, Thin film nanocrystalline Ba0.5Sr0.5Co0.8Fe0.2O3: Synthesis, conductivity, and micro-solid oxide fuel cells, Journal of Power Sources, vol.196, issue.15, pp.6214-6218, 2011.
DOI : 10.1016/j.jpowsour.2011.03.049

S. D. Kim, S. H. Hyun, J. Moon, J. Kim, and R. H. Song, Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells, Journal of Power Sources, vol.139, issue.1-2, pp.67-72, 2005.
DOI : 10.1016/j.jpowsour.2004.07.013

S. M. Kim, J. Son, K. Lee, H. Kim, H. Kim et al., Substrate effect on the electrical properties of sputtered YSZ thin films for co-planar SOFC applications, Journal of Electroceramics, vol.136, issue.10, pp.153-160, 2010.
DOI : 10.1007/s10832-008-9550-y

J. Klein, M. Hénault, C. Roux, Y. Bultel, and S. Georges, Direct methane solid oxide fuel cell working by gradual internal steam reforming: Analysis of operation, Journal of Power Sources, vol.193, issue.1, pp.331-337, 2009.
DOI : 10.1016/j.jpowsour.2008.11.122

URL : https://hal.archives-ouvertes.fr/hal-00417169

M. Kleitz, L. Dessemond, and T. Kloidt, The Solid Oxide Fuel Cell Society of Japan, Proceedings of the Third Symposium on Solid Oxide Fuel Cells in Japan, pp.35-44, 1994.

I. Kosacki, C. M. Rouleau, P. F. Becher, J. Bentley, and D. H. Lowndes, Nanoscale effects on the ionic conductivity in highly textured YSZ thin films, Solid State Ionics, vol.176, issue.13-14, pp.1319-1326, 2005.
DOI : 10.1016/j.ssi.2005.02.021

O. G. La, J. Hertz, H. Tuller, and Y. Shao-horn, Microstructural Features of RF-sputtered SOFC Anode and Electrolyte Materials, Journal of Electroceramics, vol.131, issue.1-3, pp.691-695, 2004.
DOI : 10.1007/s10832-004-5177-9

A. Lintanf, A. Mantoux, E. Blanquet, and E. Djurado, Thin Films Using Electrostatic Spray Deposition for Microelectronic Applications, The Journal of Physical Chemistry C, vol.111, issue.15, pp.5708-5714, 2007.
DOI : 10.1021/jp0676585

URL : https://hal.archives-ouvertes.fr/hal-00196396

C. Mansilla, J. P. Holgado, J. P. Espinos, A. R. Gonzalez-elipe, and F. Yubero, Microstructure and transport properties of ceria and samaria doped ceria thin films prepared by EBE???IBAD, Surface and Coatings Technology, vol.202, issue.4-7, pp.1256-1261, 2007.
DOI : 10.1016/j.surfcoat.2007.07.082

D. Marinha, C. Rossignol, and E. Djurado, Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3????? films for SOFCs, Journal of Solid State Chemistry, vol.182, issue.7, pp.1742-1748, 2009.
DOI : 10.1016/j.jssc.2009.04.018

URL : https://hal.archives-ouvertes.fr/hal-00417170

Y. Matsuzaki, M. Hishinuma, and I. Yasuda, Growth of yttria stabilized zirconia thin films by metallo-organic, ultrasonic spray pyrolysis, Thin Solid Films, vol.340, issue.1-2, pp.72-76, 1999.
DOI : 10.1016/S0040-6090(98)01344-3

G. L. Messing, S. C. Zhang, and G. V. Jayanthi, Ceramic Powder Synthesis by Spray Pyrolysis, Journal of the American Ceramic Society, vol.24, issue.17, pp.2707-2726, 1993.
DOI : 10.1111/j.1151-2916.1993.tb04007.x

R. Neagu, D. Perednis, A. Princivalle, and E. Djurado, Initial Stages in Zirconia Coatings Using ESD, Chemistry of Materials, vol.17, issue.4, pp.902-910, 2005.
DOI : 10.1021/cm048341p

URL : https://hal.archives-ouvertes.fr/hal-00383675

R. Neagu, D. Perednis, A. Princivalle, and E. Djurado, Zirconia coatings deposited by electrostatic spray deposition A chemical approach, Solid State Ionics, vol.177, issue.17-18, pp.1451-1460, 2006.
DOI : 10.1016/j.ssi.2006.07.027

URL : https://hal.archives-ouvertes.fr/hal-00333647

R. Neagu, D. Perednis, A. Princivalle, and E. Djurado, Influence of the process parameters on the ESD synthesis of thin film YSZ electrolytes, Solid State Ionics, vol.177, issue.19-25, pp.1981-1984, 2006.
DOI : 10.1016/j.ssi.2006.05.052

URL : https://hal.archives-ouvertes.fr/hal-00333650

J. Newman, Resistance for Flow of Current to a Disk, Journal of The Electrochemical Society, vol.113, issue.5, pp.501-502, 1966.
DOI : 10.1149/1.2424003

T. Nguyen and E. Djurado, Solid State Ionics, pp.191-197, 2001.

R. K. Nimat, R. S. Joshi, and S. H. Pawar, Temperature dependent conductivity and dielectric properties of Bi2V0.9Cu0.1O5.35 solid electrolyte thin films, Materials Science and Engineering: B, vol.137, issue.1-3, pp.93-98, 2007.
DOI : 10.1016/j.mseb.2006.10.011

I. Park, J. Ahn, J. Im, J. Choi, and D. Shin, Influence of rheological characteristics of YSZ suspension on the morphology of YSZ films deposited by electrostatic spray deposition, Ceramics International, vol.38, pp.481-484, 2011.
DOI : 10.1016/j.ceramint.2011.05.058

D. Perednis, O. Wilhelm, S. E. Pratsinis, and L. J. Gauckler, Morphology and deposition of thin yttria-stabilized zirconia films using spray pyrolysis, Thin Solid Films, vol.474, issue.1-2, pp.84-95, 2005.
DOI : 10.1016/j.tsf.2004.08.014

C. Peters, A. Weber, B. Butz, D. Gerthsen, and E. Ivers-tiffée, Grain-Size Effects in YSZ Thin-Film Electrolytes, Journal of the American Ceramic Society, vol.92, issue.9, pp.2017-2024, 2009.
DOI : 10.1111/j.1551-2916.2009.03157.x

A. Princivalle, Nouvelle électrode à gradients pour piles à combustible à oxyde électrolyte solide, 2006.

K. Rodrigo, J. Knudsen, N. Pryds, J. Schou, and S. Linderoth, Characterization of yttria-stabilized zirconia thin films grown by pulsed laser deposition (PLD) on various substrates, Applied Surface Science, vol.254, issue.4, pp.1338-1342, 2007.
DOI : 10.1016/j.apsusc.2007.07.194

M. V. Schlupp, B. Scherrer, H. Ma, J. G. Grolig, J. Martynczuk et al., Influence of microstructure on the cross-plane oxygen ion conductivity of yttria stabilized zirconia thin films, physica status solidi (a), vol.414, issue.6861, pp.1414-1422, 2012.
DOI : 10.1002/pssa.201228248

F. Tietz, F. J. Dias, D. Simwonis, and D. Stöver, Evaluation of commercial nickel oxide powders for components in solid oxide fuel cells, Journal of the European Ceramic Society, vol.20, issue.8, pp.1023-1034, 2000.
DOI : 10.1016/S0955-2219(99)00271-X

L. S. Wang and S. A. Barnett, Deposition, Structure, and Properties of Cermet Thin Films Composed of Ag and Y-Stabilized Zirconia, Journal of The Electrochemical Society, vol.139, issue.4, pp.1134-1140, 1992.
DOI : 10.1149/1.2069353

H. B. Wang, C. R. Xia, G. Y. Meng, and D. K. Peng, Deposition and characterization of YSZ thin films by aerosol-assisted CVD, Materials Letters, vol.44, issue.1, pp.23-28, 2000.
DOI : 10.1016/S0167-577X(99)00291-8

Z. Wang and K. Kim, Fabrication of YSZ thin films from suspension by electrostatic spray deposition, Materials Letters, vol.62, issue.3, pp.425-428, 2008.
DOI : 10.1016/j.matlet.2007.05.058

E. Wanzenberg, F. Tietz, D. Kek, P. Panjan, and D. Stöver, Influence of electrode contacts on conductivity measurements of thin YSZ electrolyte films and the impact on solid oxide fuel cells, Solid State Ionics, vol.164, issue.3-4, pp.121-129, 2003.
DOI : 10.1016/j.ssi.2003.08.053

O. Wilhelm, S. E. Pratsinis, D. Perednis, and L. J. Gauckler, Electrospray and pressurized spray deposition of yttria-stabilized zirconia films, Thin Solid Films, vol.479, issue.1-2, pp.121-129, 2005.
DOI : 10.1016/j.tsf.2004.11.206

J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, and L. J. Gauckler, Fabrication of thin electrolytes for second-generation solid oxide fuel cells, Solid State Ionics, vol.131, issue.1-2, pp.79-96, 2000.
DOI : 10.1016/S0167-2738(00)00624-X

Y. Yoo, Fabrication and characterization of thin film electrolytes deposited by RF magnetron sputtering for low temperature solid oxide fuel cells, Journal of Power Sources, vol.160, issue.1, pp.202-206, 2006.
DOI : 10.1016/j.jpowsour.2005.12.050

H. Y. Jung, K. S. Hong, H. Kim, J. K. Park, J. W. Son et al., Characterization of Thin-Film YSZ Deposited via EB-PVD Technique in Anode-supported SOFCs, Journal of The Electrochemical Society, vol.153, issue.6, pp.961-966, 2006.
DOI : 10.1149/1.2186209

E. P. Murray, T. Tsai, and S. A. Barnett, Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study, Solid State Ionics, vol.110, issue.3-4, pp.235-243, 1998.
DOI : 10.1016/S0167-2738(98)00142-8

E. P. Murray and S. A. Barnett, (La,Sr)MnO3???(Ce,Gd)O2???x composite cathodes for solid oxide fuel cells, Solid State Ionics, vol.143, issue.3-4, pp.265-273, 2001.
DOI : 10.1016/S0167-2738(01)00871-2

D. Perednis and L. J. Gauckler, Solid oxide fuel cells with electrolytes prepared via spray pyrolysis, Solid State Ionics, vol.166, issue.3-4, pp.229-239, 2004.
DOI : 10.1016/j.ssi.2003.11.011

T. Talebi, M. Haji, and B. Raissi, Effect of sintering temperature on the microstructure, roughness and electrochemical impedance of electrophoretically deposited YSZ electrolyte for SOFCs, International Journal of Hydrogen Energy, vol.35, issue.17, pp.9420-9426, 2010.
DOI : 10.1016/j.ijhydene.2010.05.079

J. Akikusa, K. Adachi, K. Hoshino, T. Ishihara, and Y. Takita, Development of a Low Temperature Operation Solid Oxide Fuel Cell, Journal of The Electrochemical Society, vol.148, issue.11, pp.1275-1278, 2001.
DOI : 10.1149/1.1409972

P. Baurens, Journée d'étude Mines Paris, 2009.

N. T. Hart, N. P. Brandon, M. J. Day, and N. Lapena-rey, Functionally graded composite cathodes for solid oxide fuel cells, Journal of Power Sources, vol.106, issue.1-2, pp.42-50, 2002.
DOI : 10.1016/S0378-7753(01)01035-7

M. J. Jørgensen, S. Primdahl, C. Bagger, and M. Mogensen, Effect of sintering temperature on microstructure and performance of LSM???YSZ composite cathodes, Solid State Ionics, vol.139, issue.1-2, pp.1-11, 2001.
DOI : 10.1016/S0167-2738(00)00818-3

J. M. Klein, Y. Bultel, S. Georges, and M. Pons, Modeling of a SOFC fuelled by methane: From direct internal reforming to gradual internal reforming, Chemical Engineering Science, vol.62, issue.6, pp.1636-1649, 2007.
DOI : 10.1016/j.ces.2006.11.034

URL : https://hal.archives-ouvertes.fr/hal-00196340

J. Klein, M. Hénault, Y. Bultel, P. Gélin, and S. Georges, A Solid Oxide Fuel Cell Operating in Gradual Internal Reforming Conditions under Pure Dry Methane, Electrochemical and Solid-State Letters, vol.11, issue.8, pp.144-147, 2008.
DOI : 10.1149/1.2936228

URL : https://hal.archives-ouvertes.fr/hal-00365552

J. Klein, M. Hénault, C. Roux, Y. Bultel, and S. Georges, Direct methane solid oxide fuel cell working by gradual internal steam reforming: Analysis of operation, Journal of Power Sources, vol.193, issue.1, pp.331-337, 2009.
DOI : 10.1016/j.jpowsour.2008.11.122

URL : https://hal.archives-ouvertes.fr/hal-00417169

J. Klein, S. Georges, and Y. Bultel, SOFC fuelled by methane without coking: optimization of electrochemical performance, Journal of Applied Electrochemistry, vol.176, issue.4, pp.943-954, 2010.
DOI : 10.1007/s10800-010-0099-5

E. P. Murray, T. Tsai, and S. A. Barnett, Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study, Solid State Ionics, vol.110, issue.3-4, pp.235-243, 1998.
DOI : 10.1016/S0167-2738(98)00142-8

E. P. Murray and S. A. Barnett, (La,Sr)MnO3???(Ce,Gd)O2???x composite cathodes for solid oxide fuel cells, Solid State Ionics, vol.143, issue.3-4, pp.265-273, 2001.
DOI : 10.1016/S0167-2738(01)00871-2

F. Tietz, D. Sebold, A. Brisse, and J. Schefold, Degradation phenomena in a solid oxide electrolysis cell after 9000??h of operation, Journal of Power Sources, vol.223, pp.129-135, 2013.
DOI : 10.1016/j.jpowsour.2012.09.061

T. Tsai and S. A. Barnett, Effect of LSM-YSZ cathode on thin-electrolyte solid oxide fuel cell performance, Solid State Ionics, vol.93, issue.3-4, pp.207-217, 1997.
DOI : 10.1016/S0167-2738(96)00524-3

J. Van-herle, A. J. Mcevoy, R. Thampi, and K. , A study on the La1 ??? xSrxMnO3 oxygen cathode, Electrochimica Acta, vol.41, issue.9, pp.1447-1454, 1996.
DOI : 10.1016/0013-4686(95)00393-2

P. Vernoux, J. Guindet, and M. Kleitz, Gradual Internal Methane Reforming in Intermediate-Temperature Solid-Oxide Fuel Cells, Journal of The Electrochemical Society, vol.145, issue.10, p.3487, 1998.
DOI : 10.1149/1.1838832

Z. Zhan and S. A. Barnett, Conclusion générale, Science, pp.308-844, 2005.