F. Références-[-ack84-]-ackermann and L. P. Kubin, The dependence of dislocation microstructure on plastic strain amplitude in cyclically strained copper single crystals, Acta Metallurgica, vol.32, issue.5, pp.715-725, 1984.
DOI : 10.1016/0001-6160(84)90145-7

K. N. Akhurst and T. C. Lindley, THE EFFECT OF MODE III LOADING ON FATIGUE CRACK GROWTH IN A ROTATING SHAFT, Fatigue & Fracture of Engineering Materials and Structures, vol.13, issue.4, pp.345-348, 1983.
DOI : 10.1016/0036-9748(79)90063-2

M. Amestoy, H. ?. Bui, and K. Dang?van, Déviation infinitésimale d'une fissure dans une direction arbitraire, Compte rendu de l'académie des sciences de Paris, 1979.

M. Amestoy and J. B. Leblond, Crack paths in plane situations???II. Detailed form of the expansion of the stress intensity factors, International Journal of Solids and Structures, vol.29, issue.4, pp.465-501, 1992.
DOI : 10.1016/0020-7683(92)90210-K

R. Badaliance, Application of strain energy density factor to fatigue crack growth analysis, Engineering Fracture Mechanics, vol.13, issue.3, pp.657-666, 1980.
DOI : 10.1016/0013-7944(80)90094-6

G. I. Barrenblatt, The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Advances in Applied Mechanics, vol.29, pp.7-55, 1962.
DOI : 10.1016/S0065-2156(08)70121-2

T. Belytschko and T. Black, Elastic crack growth in finite elements with minimal remeshing, International Journal for Numerical Methods in Engineering, vol.55, issue.5, pp.601-620, 1999.
DOI : 10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S

A. Benallal and P. Legallo, An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminium alloy under multiaxial loadings, Nuclear Engineering and Design, vol.114, issue.3, pp.345-353, 1989.
DOI : 10.1016/0029-5493(89)90112-X

A. Benallal, J. Lemaitre, D. Marquis, and M. Rousset, Non proportional Loadings in Plasticity and Viscoplasticity : Experimentation and Modelling, International Conference on Non?linear Mechanics, 1985.

A. Benallal and D. Marquis, Constitutive Equations for Nonproportional Cyclic Elasto-Viscoplasticity, Journal of Engineering Materials and Technology, vol.109, issue.4, pp.326-336, 1987.
DOI : 10.1115/1.3225985

S. B. Biner, Fatigue crack growth studies under mixed-mode loading, International Journal of Fatigue, vol.23, pp.259-263, 2001.
DOI : 10.1016/S0142-1123(01)00146-3

L. Bocher and P. Delobelle, Mechanical and microstructural investigations of an austenitic stainless steel under non?proportional loadings in tension?torsion?internal and external pressureA Review of Fatigue Crack? Growth in Steels under Mixed Mode?I and Mode?Ii Loading, International Journal of Plasticity Fatigue & Fracture of Engineering Materials & Structures, vol.17, issue.1510, pp.1491-1530, 1992.

B. L. Boyce and R. O. Ritchie, Effect of load ratio and maximum stress intensity on the fatigue threshold in TI?6Al?4V Engineering Frature mechanics, pp.129-147, 2001.

M. W. Brown, Analysis and design methods in multiaxial fatigue Advances In Fatigue Science and Technology, pp.387-402, 1989.

M. W. Brown and S. L. Wong, Fatigue crack growth rates under sequential mixed?mode I and II loading cycles, Fatigue & Fracture of Engineering Materials & Structures, vol.23, issue.8, pp.667-674, 2000.

B. Budiansky and J. W. Hutchinson, Analysis of Closure in Fatigue Crack Growth, Journal of Applied Mechanics, vol.45, issue.2, pp.267-276, 1978.
DOI : 10.1115/1.3424286

H. Burtel and C. G. , Modeling of Cyclic Plasticity in Finite Element codes, Proc. of Constitutive Laws for Engineering Matenals, 1987.

G. Cailletaud, V. Doquet, and . Pineau, Cyclic Multiaxial Behaviour of an Austenitic Stainless Steel: Microstructural Observations and Micromechanical Modelling, Retroactive Coverage) " Fatigue Under Biaxial and Multiaxial Loading, pp.131-149, 1991.
URL : https://hal.archives-ouvertes.fr/hal-00116756

G. Cailletaud, V. Doquet, and A. Pineau, Cyclic Multiaxial Behaviour of an Austenitic Stainless Steel: Microstructural Observations and Micromechanical Modelling. (Retroactive Coverage). Fatigue Under Biaxial and Multiaxial Loading, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00116756

S. Calloch and D. Marquis, Additional Hardening due to Tension? Torsion non?proportionnal loadings : Influence of the loading path shape, ASTM STP, vol.1280, pp.113-130, 1997.

J. L. Chaboche, On some modifications of kinematic hardening to improve the description of ratchetting effects, International Journal of Plasticity, vol.7, issue.7, pp.661-678, 1991.
DOI : 10.1016/0749-6419(91)90050-9

A. C. Chambers and T. H. Hyde, Mixed mode fatigue crack growth at 550??c under plane stress conditions in Jethete M152, Engineering Fracture Mechanics, vol.39, issue.3, pp.603-619, 1991.
DOI : 10.1016/0013-7944(91)90072-9

L. Chevalier and S. Calloch, Digital image correlation used to analyze the multiaxial behavior of rubber-like materials, European Journal of Mechanics - A/Solids, vol.20, issue.2, pp.169-187, 2001.
DOI : 10.1016/S0997-7538(00)01135-9

URL : https://hal.archives-ouvertes.fr/hal-00014019

B. H. Choi and J. M. Lee, Experimental observation and modeling of the retardation of fatigue crack propagation under the combination of mixed?mode single overload and constant amplitude loads, International Journal of Fatigue, issue.11?12, pp.31-1848, 2009.

L. F. Coffin, Fatigue Life Predictions at Elevated?Temperature, International Journal of Fracture, vol.11, issue.4, pp.681-681, 1975.

B. Cotterell and J. R. Rice, Slightly curved or kinked cracks, International Journal of Fracture, vol.2, issue.2, pp.155-169, 1980.
DOI : 10.1007/BF00012619

P. Dahlin and M. Olsson, Mode I fatigue crack growth reduction mechanisms after a single Mode II load cycle, Engineering Fracture Mechanics, vol.73, issue.13, pp.1833-1848, 2006.
DOI : 10.1016/j.engfracmech.2006.02.015

P. Dahlin and M. Olsson, Fatigue crack growth ??? Mode I cycles with periodic Mode II loading, International Journal of Fatigue, vol.30, issue.5, pp.931-941, 2008.
DOI : 10.1016/j.ijfatigue.2007.06.004

D. L. Davidson and J. Lankford, The Effects of Water?Vapor on Fatigue Crack Tip Plasticity in Low?Carbon Steel, Journal of Metals, vol.32, issue.8, pp.75-75, 1980.

D. L. Davidson and J. Lankford, The effect of water vapor on fatigue crack tip stress and strain range distribution and the energy required for crack propagation in low-carbon steel, International Journal of Fracture, vol.10, issue.3, pp.257-275, 1981.
DOI : 10.1007/BF00034501

D. Koning and A. U. , A Simple Crack Closure Model for Prediction of Fatigue Crack Growth Rates Under Variable-Amplitude Loading, ASTM STP, vol.743, pp.63-85, 1981.
DOI : 10.1520/STP28791S

P. Y. Decreuse and S. Pommier, History effect in fatigue crack growth under mixed-mode loading conditions, International Journal of Fatigue, vol.31, issue.11-12, pp.31-1733, 2009.
DOI : 10.1016/j.ijfatigue.2009.03.014

URL : https://hal.archives-ouvertes.fr/hal-00417887

P. Y. Decreuse, Fissuration en mode mixte I+ II non proportionnel: approche expérimentale et modélisation de la plasticité, ENS Cachan, 2010.

P. Y. Decreuse, P. S. Poncelet, M. Raka, B. Desmorat, and R. , A novel approach to model mixed mode plasticity at crack tip and crack growth. Experimental validations using velocity fields from digital image correlationNon?saturating nonlinear kinematic hardening laws, International Journal of Fatigue Comptes Rendus Mecanique, vol.338, issue.3, pp.146-151, 2010.

S. H. Doong and D. F. Socie, Dislocation Substructures and Nonproportional Hardening, Journal of Engineering Materials and Technology, vol.112, issue.4, pp.456-464, 1990.
DOI : 10.1115/1.2903357

V. Doquet and A. Pineau, Extra hardening due to cyclic non-proportional loading of an austenitic stainless steel, Scripta Metallurgica et Materialia, vol.24, issue.3, pp.433-438, 1990.
DOI : 10.1016/0956-716X(90)90178-J

V. Doquet, Twinning and multiaxial cyclic plasticity of a low stackingfault? energy f.c.c. alloy, Acta Metallurgica et Materialia, issue.8, pp.41-2451, 1993.

V. Doquet, Twinning and multiaxial cyclic plasticity of a low stacking-fault-energy f.c.c. alloy, Acta Metallurgica et Materialia, vol.41, issue.8, pp.2451-2459, 1994.
DOI : 10.1016/0956-7151(93)90325-M

V. Doquet, Mode II fatigue crack growth in a maraging steel. Frequency and environment effects, Revue de M??tallurgie, vol.99, issue.5, p.441, 2002.
DOI : 10.1051/metal:2002163

URL : https://hal.archives-ouvertes.fr/hal-00117728

V. Doquet and S. Pommier, Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.289, issue.11, pp.1051-1060, 2004.
DOI : 10.1046/j.1460-2695.2003.00622.x

URL : https://hal.archives-ouvertes.fr/hal-00111416

V. Doquet and G. Bertolino, Local approach to fatigue cracks bifurcation, International Journal of Fatigue, vol.30, issue.5, pp.942-950, 2008.
DOI : 10.1016/j.ijfatigue.2007.06.001

V. Doquet and M. Abbadi, Influence of the loading path on fatigue crack growth under mixed-mode loading, International Journal of Fracture, vol.22, issue.N??7, pp.219-232, 2009.
DOI : 10.1007/s10704-009-9396-6

URL : https://hal.archives-ouvertes.fr/hal-00424431

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

D. J. Duquette and D. J. Gaul, The Effect of Fretting and Environment on Fatigue Crack Initiation and Early Propagation in a Quenched and Tempered 4130 Steel, Metallurgical Transactions a? Physical Metallurgy and Materials Science, vol.11, issue.9, pp.1555-1561, 1980.

W. Elber, T. Elguedj, A. Gravouil, and A. Combescure, The Significance of Fatigue Crack Closure A mixed augmented Lagrangianextended finite element method for modelling elastic?plastic fatigue crack growth with unilateral contact, ASTM STP Int. J. Numer. Methods Engrg, vol.486, pp.230-242, 1971.

F. S. Erdogan and G. C. , On the Crack Extension in Plates Under Plane Loading and Transverse Shear, Journal of Basic Engineering, vol.85, issue.4, pp.519-525, 1963.
DOI : 10.1115/1.3656897

. Fat88a, A. Fatemi, and P. Kurath, Multiaxial Fatigue Life Predictions under the Influence of Mean?Stresses, Journal of Engineering Materials and Technology?Transactions of the Asme, vol.110, issue.4, pp.380-388, 1988.

. Fat88b, A. Fatemi, and D. F. Socie, A Critical Plane Approach to Multiaxial Fatigue Damage Including out?of?Phase Loading, Fatigue & Fracture of Engineering Materials & Structures, vol.11, issue.3, pp.149-165, 1988.

A. Fatemi and N. Shamsaei, Multiaxial fatigue: An overview and some approximation models for life estimation, International Journal of Fatigue, vol.33, issue.8, pp.948-958, 2011.
DOI : 10.1016/j.ijfatigue.2011.01.003

E. Ferrie and J. Y. Buffiere, Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method, Acta Materialia, vol.54, issue.4, pp.1111-1122, 2006.
DOI : 10.1016/j.actamat.2005.10.053

URL : https://hal.archives-ouvertes.fr/hal-00436215

N. A. Fleck, Finite element analysis of plasticity-induced crack closure under plane strain conditions, Engineering Fracture Mechanics, vol.25, issue.4, pp.441-449, 1986.
DOI : 10.1016/0013-7944(86)90258-4

N. A. Fleck, Influence of Stress State on Crack Grawth Retardation, American Society for Testing and Materials, vol.1, pp.157-183, 1988.

R. G. Forman and V. E. Kearney, Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures, Journal of Basic Engineering, vol.89, issue.3, p.459, 1967.
DOI : 10.1115/1.3609637

F. Galland, A. Gravouil, E. Malvesin, and M. Rochette, A global model reduction approach for 3D fatigue crack growth with confined plasticity, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.5-8, pp.699-716, 2011.
DOI : 10.1016/j.cma.2010.08.018

URL : https://hal.archives-ouvertes.fr/hal-00938580

H. Gao, M. W. Brown, and K. J. Miller, Mixed mode fatigue thresholds, Fatigue & Fracture of Engineering Materials & Structures, vol.5, issue.1, pp.1-17, 1982.

H. Gao and S. Upul, Effect of non?proportionnal overloading in fatigue life, Fat. Fract. Eng. Mat. Struct, vol.19, pp.1197-1206, 1996.

N. Gao and M. W. Brown, An effective method to investigate short crack growth behaviour by reverse bending testing, International Journal of Fatigue, vol.29, issue.3, pp.565-574, 2007.
DOI : 10.1016/j.ijfatigue.2006.04.005

E. E. Gdoutos, A. Gravouil, N. Moës, and T. Belytschko, Problems of Mixed Mode Crack Propagation., Martinus Nijhoff, The NederlandsNon?planar 3D crack growth by the extended finite element and level sets?Part II: Level set update, International Journal for Numerical Methods in Engineering, vol.53, issue.11, pp.2569-2586, 1984.

P. ?. Guidault, A. Allix, L. Champaney, and C. Cornuault, A multiscale extended finite element method for crack propagation, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.5, pp.381-399, 2008.
DOI : 10.1016/j.cma.2007.07.023

Y. H. Guo and T. S. Srivatsan, Influence of mixed-mode loading on fatigue-crack propagation, Engineering Fracture Mechanics, vol.47, issue.6, p.843, 1994.
DOI : 10.1016/0013-7944(94)90063-9

T. K. Hellen and W. S. Blackburn, The calculation of stress intensity factors for combined tensile and shear loading, International Journal of Fracture, vol.85, issue.4, pp.605-617, 1975.
DOI : 10.1007/BF00116368

F. Hourlier, H. Ondt, M. Truchon, and A. Pineau, Fatigue Crack Path Behavior Under Polymodal Fatigue
DOI : 10.1520/STP36226S

T. H. Hyde and A. C. Chambers, A compact mixed-mode (cmm) fracture specimen, The Journal of Strain Analysis for Engineering Design, vol.23, issue.2, pp.61-66, 1988.
DOI : 10.1243/03093247V232061

G. R. Irwin, Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957.

G. R. Irwin, Plastic zone near a crack and fracture toughness, Proc. Of the 7th Sagamore Ordnance Materials Conference, 1960.

G. Z. Kang and Q. Gao, Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations, International Journal of Non-Linear Mechanics, vol.39, issue.5, pp.843-857, 2004.
DOI : 10.1016/S0020-7462(03)00060-X

S. Kida and T. Itoh, DISLOCATION STRUCTURE AND NON-PROPORTIONAL HARDENING OF TYPE 304 STAINLESS STEEL, Fatigue & Fracture of Engineering Materials & Structures, vol.109, issue.3, pp.1375-1386, 1997.
DOI : 10.1111/j.1460-2695.1997.tb01496.x

H. Kitagawa and S. Takahashi, applicability of fracture mechanics to very small cracks on the cracks in the early stage, pp.627-631, 1976.

C. P. Laird and J. E. , Influence of Metallurgical Structure on Mechanisms of Fatigue Crack Propagation, Materials Research and Standards, vol.7, issue.8, p.336, 1967.

H. S. Lam78a-]-lamba and O. M. Sidebottom, Cyclic Plasticity for Nonproportional Paths: Part 1???Cyclic Hardening, Erasure of Memory, and Subsequent Strain Hardening Experiments, Journal of Engineering Materials and Technology, vol.100, issue.1, pp.96-103, 1978.
DOI : 10.1115/1.3443456

H. S. Lam78b-]-lamba and O. M. Sidebottom, Cyclic Plasticity for Nonproportional Paths: Part 2???Comparison With Predictions of Three Incremental Plasticity Models, Journal of Engineering Materials and Technology, vol.100, issue.1, pp.104-111, 1978.
DOI : 10.1115/1.3443440

V. Laz01a-]-lazarus and J. B. Leblond, Crack front rotation and segmentation in mixed mode I+III or I+II+III. Part II: Comparison with experiments, Journal of the Mechanics and Physics of Solids, vol.49, issue.7, pp.1421-1443, 2001.
DOI : 10.1016/S0022-5096(01)00008-4

V. Laz01b-]-lazarus and J. B. Leblond, Crack front rotation and segmentation in mixed mode I+III or I+II+III. Part I: Calculation of stress intensity factors, Journal of the Mechanics and Physics of Solids, vol.49, issue.7, pp.1399-1420, 2001.
DOI : 10.1016/S0022-5096(01)00007-2

J. B. Leblond, Crack paths in plane situations???I. General form of the expansion of the stress intensity factors, International Journal of Solids and Structures, vol.25, issue.11, pp.1311-1325, 1989.
DOI : 10.1016/0020-7683(89)90094-2

J. B. Leblond, Crack paths in three-dimensional elastic solids. i: two-term expansion of the stress intensity factors???application to crack path stability in hydraulic fracturing, International Journal of Solids and Structures, vol.36, issue.1, pp.79-103, 1999.
DOI : 10.1016/S0020-7683(97)00276-X

J. ?. Leblond and A. Karma, Theoretical analysis of crack front instability in mode I+III, Journal of the Mechanics and Physics of Solids, vol.59, issue.9, pp.1872-1887, 2011.
DOI : 10.1016/j.jmps.2011.05.011

S. B. Lee and J. Y. Lim, Application of local stress?strain approaches in the prediction of fatigue crack initiation life for cyclically non?stabilized and non?Masing steel, International Journal of Fatigue, vol.27, issue.10?12, pp.1653-1660, 2005.

C. S. Li, VECTOR CTD CRITERION APPLIED TO MIXED MODE FATIGUE CRACK GROWTH, Fatigue & Fracture of Engineering Materials and Structures, vol.1, issue.1, pp.59-65, 1989.
DOI : 10.1016/0013-7944(86)90091-3

N. Limodin and J. Rethore, Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation, Acta Materialia, vol.58, issue.8, pp.2957-2967, 2010.
DOI : 10.1016/j.actamat.2010.01.024

URL : https://hal.archives-ouvertes.fr/hal-00453971

P. Lukas and M. Klesnil, Cyclic stress-strain response and fatigue life of metals in low amplitude region, Materials Science and Engineering, vol.11, issue.6, pp.345-356, 1973.
DOI : 10.1016/0025-5416(73)90125-0

A. M. Mageed and R. K. Pandey, Fatigue Crack Closure in Kinked Cracks and Path of Crack?Propagation, International Journal of Fracture, vol.44, issue.3, pp.39-42, 1990.

A. M. Mageed and R. K. Pandey, Mixed mode crack growth under static and cyclic loading in A1-alloy sheets, Engineering Fracture Mechanics, vol.40, issue.2, p.371, 1991.
DOI : 10.1016/0013-7944(91)90271-2

A. M. Mageed and R. K. Pandey, Studies on Cyclic Crack Path and the Mixed?Mode Crack Closure Behavior in Al?AlloyAn Experimental Investigation of Mixed?Mode Fracture, International Journal of Fatigue International Journal of Fracture, vol.14, issue.414, pp.235-252, 1989.

F. Mathieu, F. Hild, and S. Roux, Identification of a crack propagation law by digital image correlation, International Journal of Fatigue, vol.36, issue.1, 2011.
DOI : 10.1016/j.ijfatigue.2011.08.004

URL : https://hal.archives-ouvertes.fr/hal-00694317

R. C. Mcclung, CRACK CLOSURE AND PLASTIC ZONE SIZES IN FATIGUE, Fatigue & Fracture of Engineering Materials and Structures, vol.982, issue.4, pp.455-468, 1991.
DOI : 10.1016/0022-5096(73)90024-0

R. C. Mc-clung, Finite elements perspectives on the mechanics of fatigue crack closure, 6th International Fatigue Congress ? 6?10 May, 1996.

. Mcd95, D. L. Mcdowell, and T. J. Lim, Path dependence of shape memory alloys during cyclic loading, Journal of Intelligent Material Systems and Structures, vol.6, issue.6, pp.817-830, 1995.

A. J. Mcevily and R. J. Donahue, Crack Opening Displacement and Rate of Fatigue Crack Growth, International Journal of Fracture Mechanics, vol.8, issue.2, pp.209-219, 1972.

K. J. Miller, THE SHORT CRACK PROBLEM, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.4, pp.223-232, 1982.
DOI : 10.1016/0025-5416(78)90203-3

K. J. Miller, The behaviour of short fatigue cracks, 1986.

M. Mineur and P. Villechaise, Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel, Materials Science and Engineering: A, vol.286, issue.2, pp.257-268, 2000.
DOI : 10.1016/S0921-5093(00)00804-2

N. Moes and J. Dolbow, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.46, issue.1, pp.131-150, 1999.
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.3.CO;2-A

URL : https://hal.archives-ouvertes.fr/hal-01004829

N. Moës, A. Gravouil, and T. Belytschko, Non-planar 3D crack growth by the extended finite element and level sets-Part I: Mechanical model, International Journal for Numerical Methods in Engineering, vol.33, issue.2, pp.2549-2568, 2002.
DOI : 10.1002/nme.429

K. P. Mroz and Z. Mroz, On crack path evolution rules, Engineering Fracture Mechanics, vol.77, issue.11, pp.1781-1807, 2010.
DOI : 10.1016/j.engfracmech.2010.03.038

H. Mughrabi, Microscopic Mechanisms of Metal Fatigue, Strength of metals and alloys Proceedings of the Fifth International Conference, pp.1615-1638, 1980.
DOI : 10.1016/B978-1-4832-8412-5.50248-4

. Murakami, Y. Murakami, and K. Takahashi, Threshold and growth mechanism of fatigue cracks under mode II and III loadings, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.11, issue.6, pp.523-531, 1987.
DOI : 10.1046/j.1460-2695.1998.00128.x

N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity, AN SSSR, 1949.
DOI : 10.1007/978-94-017-3034-1

H. Nay87a-]-nayeb?hashemi, S. S. Hwang, and P. G. Poles, Crack closure phenomena in modes I and II interactions, Prec. 3rd Int. Conf. on Fatigue and Fatigue Thresholds, 1987.

H. Nay87b-]-nayebhashemi and M. E. Taslim, Effects of the transient Mode II on the steady state crack growth in Mode I, Engineering Fracture Mechanics, vol.26, issue.6, pp.789-807, 1987.
DOI : 10.1016/0013-7944(87)90029-4

H. Nay87c-]-nayebhashemi and F. A. Mcclintock, Micro?Mechanical Modeling of Mode?Iii Fatigue Crack?Growth in Rotor SteelsOn the Contrast between Mode?I and Mode?Iii Fatigue Crack?Propagation under Variable? Amplitude Loading Conditions, International Journal of Fracture Materials Science and Engineering, vol.23, issue.591, pp.163-185, 1983.

I. S. Nedbal and J. Kunz, Relation Between Striation Spacing and Fatigue Crack Growth Rate in A1?Alloy Sheets, Advances in Fracture Research, vol.5, pp.3483-3491, 1989.

P. Neumann, Coarse slip model of fatigue, Acta Metallurgica, vol.17, issue.9, p.1219, 1969.
DOI : 10.1016/0001-6160(69)90099-6

P. Neumann, The geometry of slip processes at a propagating fatigue crack???II, Acta Metallurgica, vol.22, issue.9, pp.1167-1178, 1974.
DOI : 10.1016/0001-6160(74)90072-8

J. C. Newman, A Finite-Element Analysis of Fatigue Crack Closure, 1976.
DOI : 10.1520/STP33952S

J. C. Newman and W. Elber, Mechanics of fatigue crack closure, ASTM STP 982, 1988.
DOI : 10.1520/STP982-EB

K. Ogura and K. Ohji, Fem Analysis of Crack Closure and Delay Effect in Fatigue Crack Growth under Variable Amplitude Loading, Engineering Fracture Mechanics, vol.9, issue.2, pp.471-480, 1977.

N. Ohn93a-]-ohno and J. D. Wang, Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior, International Journal of Plasticity, vol.9, issue.3, pp.375-390, 1993.
DOI : 10.1016/0749-6419(93)90042-O

N. Ohn93b-]-ohno and J. D. Wang, Kinematic hardening rules with critical state of dynamic recovery, part II: Application to experiments of ratchetting behavior, International Journal of Plasticity, vol.9, issue.3, pp.391-403, 1993.
DOI : 10.1016/0749-6419(93)90043-P

N. Ohno and J. D. Wang, Kinematic Hardening Rules for Simulation of Ratchetting Behavior, European Journal of Mechanics a? Solids, vol.13, issue.4, pp.519-531, 1994.

E. Orowan, Fracture and strength of solids, Reports on Progress in Physics, vol.12, issue.1, p.183, 1948.
DOI : 10.1088/0034-4885/12/1/309

P. C. Paris, PhD dissertation in applied mechanics, 1962.

P. C. Paris, The fracture mechanics approach to fatigue Fatigue : an interdisciplinary approach, 1964.

P. C. Paris, M. P. Gomez, and W. P. Anderson, A rational analytic theory of fatigue, The trend in engineering, vol.13, pp.528-534, 1961.

J. ?. Passieux, A. Gravouil, J. Réthoré, and M. ?. Baietto, Direct estimation of generalized stress intensity factors using a three-scale concurrent multigrid X-FEM, International Journal for Numerical Methods in Engineering, vol.63, issue.5, pp.1648-1666, 2011.
DOI : 10.1002/nme.3037

URL : https://hal.archives-ouvertes.fr/hal-00708392

A. B. Patel and R. K. Pandey, FATIGUE CRACK GROWTH UNDER MIXED MODE LOADING, Fatigue & Fracture of Engineering Materials and Structures, vol.28, issue.1, pp.65-77, 1981.
DOI : 10.1007/BF00035493

R. M. Pelloux, Mechanisms of Formation of Ductile Fatigue Striations, Asm Transactions Quarterly, vol.62, issue.1, p.281, 1969.

J. N. Périé, H. Leclerc, S. Roux, and F. Hild, Identification de lois d'endommagement anisotrope à partir de la corrélation d'images numériques, 2009.

A. G. Pineau and R. M. , Influence of strain-induced martensitic transformations on fatigue crack growth rates in stainless steels, Metallurgical Transactions, vol.2, issue.5, pp.1103-1112, 1974.
DOI : 10.1007/BF02644322

R. Pip91a-]-pippan, Dislocation emission and fatigue crack growth threshold, Acta Metallurgica et Materialia, vol.39, issue.3, pp.255-262, 1991.
DOI : 10.1016/0956-7151(91)90304-J

R. Pip91b-]-pippan, Threshold and effective threshold of fatigue crack propagation in ARMCO iron I: The influence of grain size and cold working, Materials Science and Engineering: A, vol.138, issue.1, pp.1-13, 1991.
DOI : 10.1016/0921-5093(91)90671-9

R. Pip91c-]-pippan, Threshold and effective threshold of fatigue crack propagation in ARMCO iron II: The influence of environment, Materials Science and Engineering: A, vol.138, issue.1, pp.15-22, 1991.
DOI : 10.1016/0921-5093(91)90672-A

R. Pippan and K. Haberz, The plastic deformation of fracture surface contacts in fatigue, Engineering Fracture Mechanics, vol.53, issue.3, pp.441-448, 1996.
DOI : 10.1016/0013-7944(95)00114-X

R. Pippan and F. O. Riemelmoser, An argument for a cycle?by? cycle propagation of fatigue cracks at small stress intensity ranges, Acta Materialia, vol.46, issue.5, pp.1793-1799, 1998.

R. Pippan and J. Pokluda, Can pure mode III fatigue loading contribute to crack propagation in metallic materials, Fatigue & Fracture of Engineering Materials & Structures, vol.28, issue.1?2, pp.179-185, 2005.

R. Pippan and H. Weinhandl, Discrete dislocation modelling of near threshold fatigue crack propagation, International Journal of Fatigue, vol.32, issue.9, pp.1503-1510, 2010.
DOI : 10.1016/j.ijfatigue.2009.10.001

R. Pippan and C. Zelger, On the mechanism of fatigue crack propagation in ductile metallic materials, Fatigue & Fracture of Engineering Materials & Structures, vol.49, issue.1, pp.1-16, 2011.
DOI : 10.1111/j.1460-2695.2010.01484.x

R. Pip11b-]-pippan and W. Grosinger, Fatigue crack closure: From LCF to small scale yielding, International Journal of Fatigue, vol.46, 2011.
DOI : 10.1016/j.ijfatigue.2012.02.016

R. Plank and G. Kuhn, Fatigue crack propagation under non-proportional mixed mode loading, Engineering Fracture Mechanics, vol.62, issue.2-3, pp.203-229, 1999.
DOI : 10.1016/S0013-7944(98)00097-6

S. Pommier, The effects of the constitutive behaviour of alloys on their resistance to fatigue crack growth under variable amplitude loading, Advances in Mechanical Behaviour, Plasticity and Damage, Vols 1 and 2, pp.991-996, 2000.

S. Pommier, A study of the relationship between variable level fatigue crack growth and the cyclic constitutive behaviour of steel, International Journal of Fatigue, vol.23, pp.111-118, 2001.
DOI : 10.1016/S0142-1123(01)00165-7

S. Pom02a-]-pommier, Plane strain crack closure and cyclic hardening, Engineering Fracture Mechanics, vol.69, issue.1, pp.25-44, 2002.
DOI : 10.1016/S0013-7944(01)00061-3

S. Pom02b-]-pommier and M. D. Freitas, Effect on fatigue crack growth of interactions between overloads, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.16, issue.7, pp.709-722, 2002.
DOI : 10.1016/0013-7944(89)90027-1

S. Pommier, M. Pommier, S. , and R. Hamam, Time derivative equations for mode I fatigue crack growth in metalsIncremental model for fatigue crack growth based on a displacement partitioning hypothesis of mode I elasticplastic displacement fields, International Journal of Fatigue Fatigue & Fracture of Engineering Materials & Structures, vol.27, issue.307, pp.1297-1306, 2005.

S. Pom07b-]-pommier and R. Hamam, Variable amplitude fatigue crack growth, experimental results and modeling, International Journal of Fatigue, vol.29, issue.9?11, pp.1634-1646, 2007.

S. Pommier and P. Lopez?crespo, A multi-scale approach to condense the cyclic elastic-plastic behaviour of the crack tip region into an extended constitutive model, Fatigue & Fracture of Engineering Materials & Structures, vol.12, issue.5, pp.899-915, 2009.
DOI : 10.1111/j.1460-2695.2009.01392.x

S. Pommier and M. Risbet, Time derivative equations for mode I fatigue crack growth in metals, International Journal of Fatigue, vol.27, issue.10-12, pp.1297-1306, 2005.
DOI : 10.1016/j.ijfatigue.2005.06.034

URL : https://hal.archives-ouvertes.fr/hal-00114052

L. P. Pook and J. K. Sharples, The mode III fatigue crack growth threshold for mild steel, International Journal of Fracture, vol.14, issue.6, pp.223-226, 1979.
DOI : 10.1007/BF00019933

L. P. Pook, The fatigue crack direction and threshold behaviour of mild steel under mixed mode I and III loading, International Journal of Fatigue, vol.7, issue.1, pp.21-30, 1985.
DOI : 10.1016/0142-1123(85)90004-0

J. Qian and A. Fatemi, Mixed mode fatigue crack growth: A literature survey, Engineering Fracture Mechanics, vol.55, issue.6, pp.969-990, 1996.
DOI : 10.1016/S0013-7944(96)00071-9

C. F. Qian, H. F. Raka, B. Canto, R. B. Poncelet, M. Barbier et al., Experimental study of I plus III mixed mode fatigue crack transformation propagation, Fatigue & Fracture of Engineering Materials & Structures, vol.34, issue.1, pp.53-59, 2010.

J. Rannou, A. Gravouil, and M. ?. Baietto?dubourg, A local multigrid X-FEM strategy for 3-D crack propagation, International Journal for Numerical Methods in Engineering, vol.41, issue.11-12, pp.581-600, 2008.
DOI : 10.1002/nme.2427

URL : https://hal.archives-ouvertes.fr/hal-00938285

L. Reis and . Li, Crack initiation and growth path under multiaxial fatigue loading in structural steels, International Journal of Fatigue, vol.31, issue.11-12, pp.31-1660, 2009.
DOI : 10.1016/j.ijfatigue.2009.01.013

J. Réthoré, S. Roux, and F. Hild, Hybrid analytical and extended finite element method (HAX-FEM): A new enrichment procedure for cracked solids, International Journal for Numerical Methods in Engineering, vol.150, issue.5-7, pp.269-285, 2010.
DOI : 10.1002/nme.2691

R. [. Rice and . Thomson, Ductile vs. Brittle Behavior of Crystals, Philosophical Magazine, vol.29, pp.73-97, 1974.
DOI : 10.2172/4403224

H. A. Richard and M. Sander, Finite element analysis of fatigue crack growth with interspersed mode I and mixed mode overloads, International Journal of Fatigue, vol.27, issue.8, pp.905-913, 2005.

R. O. Ritchie, Influence of Microstructure and Mean Stress on near? Threshold Fatigue Crack?Propagation in Steels, Jom?Journal of Metals, vol.28, issue.12, pp.40-40, 1976.

R. O. Ritchie and J. F. , Mechanisms of fatigue crack growth in low alloy steel, Acta Metallurgica, vol.21, issue.5, pp.639-648, 1973.
DOI : 10.1016/0001-6160(73)90073-4

R. O. Ritchie and F. A. Mcclintock, Mode III fatigue crack propagation in low alloy steel, Metallurgical Transactions A, vol.89, issue.1, pp.101-110, 1982.
DOI : 10.1007/BF02642420

J. Royer, A specimen geometry for plane mixed modes, Engineering Fracture Mechanics, vol.23, issue.4, pp.763-775, 1986.
DOI : 10.1016/0013-7944(86)90121-9

J. A. Ruiz?sabariego and S. Pommier, Oxidation assisted fatigue crack growth under complex non-isothermal loading conditions in a nickel base superalloy, International Journal of Fatigue, vol.31, issue.11-12, pp.31-1724, 2009.
DOI : 10.1016/j.ijfatigue.2009.03.009

URL : https://hal.archives-ouvertes.fr/hal-00417877

J. Rupil and L. Vincent, IDENTIFICATION AND PROBABILISTIC MODELING OF MESOCRACK INITIATIONS IN 304L STAINLESS STEEL, International Journal for Multiscale Computational Engineering, vol.9, issue.4, pp.445-458, 2011.
DOI : 10.1615/IntJMultCompEng.v9.i4.70

URL : https://hal.archives-ouvertes.fr/hal-00614889

M. Sander and H. A. Richard, Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth, International Journal of Fatigue, vol.28, issue.5-6, pp.583-591, 2006.
DOI : 10.1016/j.ijfatigue.2005.05.012

J. Schijve, Effect of load sequences on crack propagation under random and program loading, Engineering Fracture Mechanics, vol.5, issue.2, 1973.
DOI : 10.1016/0013-7944(73)90022-2

. Sih74a and G. C. Sih, Strain Energy Density Factor Applied to Mixed Mode Crack Problems, International Journal of Fracture, vol.10, issue.3, pp.305-321, 1974.

. Sih74b and G. C. Sih, Some Observations on Sihs Strain Energy Density Approach for Fracture Prediction, International Journal of Fracture, vol.10, issue.2, pp.279-283, 1974.

G. C. Sih, Mechanics of fracture initiation and propagation: surface and volume energy density applied as failure criterion, 1991.
DOI : 10.1007/978-94-011-3734-8

P. J. Singh and C. K. Mukhopadhyay, Understanding fatigue crack propagation in AISI 316 (N) weld using Elber's crack closure concept: Experimental results from GCMOD and acoustic emission techniques, International Journal of Fatigue, vol.29, issue.12, pp.2170-2179, 2007.

E. W. Smith and K. J. Pascoe, Fatigue crack initiation and growth in a high strength ductile steel subject to in phase biaxial loading, American Society for Testing and Materials STP, vol.853, pp.111-134, 1985.

A. Steuwer and M. Rahman, The evolution of crack-tip stresses during a fatigue overload event, Acta Materialia, vol.58, issue.11, pp.4039-4052, 2010.
DOI : 10.1016/j.actamat.2010.03.013

S. Suresh, Micromechanisms of fatigue crack growth retardation following overloads, Engineering Fracture Mechanics, vol.18, issue.3, pp.577-593, 1983.
DOI : 10.1016/0013-7944(83)90051-6

S. Suresh, Further remarks on the micromechanisms of fatigue crack growth retardation following overloads, Engineering Fracture Mechanics, vol.21, issue.6, pp.1169-1170, 1985.
DOI : 10.1016/0013-7944(85)90175-4

S. Suresh and R. O. Ritchie, Mechanistic dissimilarities between environmentally influenced fatigue-crack propagation at near-threshold and higher growth rates in lower strength steels, Metal Science, vol.13, issue.11, pp.529-538, 1982.
DOI : 10.1016/0036-9748(81)90275-1

K. Tanaka, Fatigue crack propagation from a crack inclined to the cyclic tensile axis, Engineering Fracture Mechanics, vol.6, issue.3, pp.493-507, 1974.
DOI : 10.1016/0013-7944(74)90007-1

. Tan85a and E. Tanaka, A Constitutive Model of Cyclic Plasticity in Multiaxial Non?Proportional Loadings, Transactions of the 8th International Conference on Structural Mechanics in Reactor Technology, 1985.

. Tan85b and E. Tanaka, Effects of Strain Paths Shapes on Nonproportional Cyclic Plasticity, J. Mech. Phys. Solids, vol.33, pp.559-575, 1985.

E. Tanaka, A Nonproportionality Parameter and a Cyclic Viscoplastic Constitutive Model Taking into Account Amplitude Dependences and Memory Effects of Isotropic Hardening, European Journal of Mechanics a?Solids, vol.13, issue.2, pp.155-173, 1994.

H. Tanaka, Effects of plastic strain amplitudes on non-proportional cyclic plasticity, Acta Mechanica, vol.23, issue.3-4, pp.167-182, 1985.
DOI : 10.1007/BF01176916

K. Tanaka and Y. Nakai, Mechanics of Growth Threshold of Small Fatigue Cracks, Journal of Metals, vol.35, issue.8, pp.15-15, 1983.

K. Tanaka and Y. Nakai, Fatigue Growth Threshold of Small Cracks, International Journal of Fracture, vol.17, issue.5, pp.519-533, 1981.

P. S. Theocaris, N. P. Andrianopoulos, and E. K. Tschegg, Author's closure on the discussion by GC Sih and EE Gdoutos of The Mises elastic?plastic boundary as the core region in fracture criteriaA Contribution to Mode?Iii Fatigue Crack? PropagationMode?Iii and Mode?I Fatigue Crack?Propagation Behavior under Torsional Loading, Engng Fracture MechMaterials Science and Engineering Journal of Materials Science, vol.20, issue.186, pp.127-136, 1982.

D. C. Tian and D. Q. Lu, Crack propagation under combined stresses in three-dimensional medium, Engineering Fracture Mechanics, vol.16, issue.1, pp.5-17, 1982.
DOI : 10.1016/0013-7944(82)90031-5

V. Tvergaard, Effect of T-stress on crack growth under mixed mode I???III loading, International Journal of Solids and Structures, vol.45, issue.18-19, pp.5181-5188, 2008.
DOI : 10.1016/j.ijsolstr.2008.05.014

A. K. Vasudevan and S. Suresh, Influence of corrosion deposits on near-threshold fatigue crack growth behavior in 2xxx and 7xxx series aluminum alloys, Metallurgical Transactions A, vol.27, issue.12, pp.2271-2280, 1982.
DOI : 10.1007/BF02648397

A. Vaziri and H. Nayeb?hashemi, The effect of crack surface interaction on the stress intensity factor in Mode III crack growth in round shafts, Engineering Fracture Mechanics, vol.72, issue.4, pp.617-629, 2005.
DOI : 10.1016/j.engfracmech.2004.03.014

R. P. Wei, Some aspects of environment-enhanced fatigue-crack growth, Engineering Fracture Mechanics, vol.1, issue.4, pp.633-651, 1970.
DOI : 10.1016/0013-7944(70)90004-4

H. Westergaard, Bearing pressures and cracks, Journal of Applied Mechanics, vol.6, pp.49-53, 1939.

O. E. Wheeler, Spectrum Loading and Crack Growth, Journal of Basic Engineering, vol.94, issue.1, p.181, 1972.
DOI : 10.1115/1.3425362

J. Willenborg, R. M. Engle, and H. A. Wood, Crack retardation model using an effective stress concept, 1971.

M. I. Williams, The stresses around a fault or a crack in dissimilar media, pp.199-204, 1959.

A. K. Wong, On the application of the strain energy density theory in predicting crack initiation and angle of growth, Engineering Fracture Mechanics, vol.27, issue.2, pp.157-170, 1987.
DOI : 10.1016/0013-7944(87)90165-2

J. R. Yates and M. Zanganeh, Crack paths under mixed mode loading, Engineering Fracture Mechanics, vol.75, issue.3-4, pp.319-330, 2008.
DOI : 10.1016/j.engfracmech.2007.05.014

A. T. Yokobori and T. Yokobori, FATIGUE CRACK GROWTH UNDER MIXED MODES I AND II, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.1, pp.315-325, 1985.
DOI : 10.1016/0013-7944(74)90007-1