S. Chevalier, Traitements de surfaces et nouveaux matériaux : Quelles solutions pour lutter contre la dégradation des matériaux à haute température ?, EUD Sciences, 2007.

P. Sarrazin, A. Galerie, and J. Fouletier, Les mécanismes de la corrosion sèche. Une approche cinétique, EDP Sciences, 2000.

R. Gaboriaud, Thermodynamique : Eléments fondamentaux de l'énergétique et de la cinétique chimique, Ellipses, 1998.

G. Béranger, J. C. Colson, and F. Dabosi, Corrosion des matériaux à haute température, EDP Sciences, 1987.

M. Schütze, Protective oxide scales and their breakdown, Institute of corrosion and wiley Series, 1997.

D. J. Baxter and K. Natesan, Mechanical considerations in the degradation of structural materials in aggressive environments at high temperatures, Reviews on high temperature materials, pp.149-250, 1983.

P. Kofstadt, High temperature corrosion, p.558, 1988.

M. Schütze and W. J. Quadakkers, Novel approaches to improving high temperature corrosion resistance, European Federation of Corrosion Publications Number, p.47, 2004.

A. M. Huntz and S. C. Tsaï, Diffusion in oxide scales: application to Cr2O3 scales, Journal of Materials Science Letters, vol.57, issue.11, pp.821-825, 1994.
DOI : 10.1007/BF00271331

N. Patibandla, T. A. Ramanarayanan, and F. Cosandey, Effect of Ion-Implanted Cerium on the Growth Rate of Chromia Scales on Ni-Cr Alloys, Journal of The Electrochemical Society, vol.138, issue.7, p.2176, 1991.
DOI : 10.1149/1.2085946

J. Mougin, Tenue mécanique de couches d'oxyde thermique générées sur le chrome et sur quelques aciers inoxydables ferritiques : Etude des contraintes et de l'adhérence, 2001.

F. Toscan, Optimisation conjointe de l'adhérence des couches d'oxydes et des cinétiques d'oxydation thermique sur des aciers inoxydables, 2004.

P. Y. Hou, J. Ager, J. Mougin, and A. Galerie, Limitations and advantages of Raman Spectroscopy for the determination of Oxidation Stresses Oxid, Met, pp.75-229, 2011.

S. Henry, Influence de la vapeur d'eau sur l'oxydation à haute temperature du chrome et de quelques aciers inoxydables ferritiques stabilisés, 2000.

S. Jianian, Z. Longjiang, and L. , Tiefan, high temperature oxidation of Fe-Cr alloys in wet oxygen, Oxid. Met, pp.48-347, 1997.

S. Chevalier, Stage Post-Doctoral, 1999.

R. J. Hussey and M. J. Graham, The influence of reactive-element coatings on the high-temperature oxidation of pure-Cr and high-Cr-content alloys, Oxidation of Metals, vol.135, issue.3-4, p.349, 1996.
DOI : 10.1007/BF01046989

S. Daghigh, Evolution des contraintes dans le système Ni70Cr30/Cr 2 O 3 en fonction de la température : étude in situ par diffraction des rayons X et modélisation, Thèse de Doctorat, 1996.

G. Calvarin, A. M. Huntz, A. Hugot-le-goff, S. Joiret, and M. C. Bernard, Oxide Scale Stress Determination by Raman Spectroscopy Application to the NiCr/Cr2O3 System and Influence of Yttrium, Scripta Materialia, vol.38, issue.11, pp.1649-1658, 1998.
DOI : 10.1016/S1359-6462(98)00079-7

A. M. Huntz, S. Daghigh, A. Piant, and J. L. Lebrun, Evidence of stress relaxation in thermally grown oxide layers-experiments and modeling, Mater. Sci. Eng, pp.248-292, 1998.

C. Salmon, Influence of processing conditions on the properties of aluminium matrix composites reinforced with metallic fibers, 2001.

C. Duhamel and R. Molins, Phénomènes de couplages en oxidation haute température, Ecole Corrosion et protection des matériaux à hautes températures, Porquerolles, 2010.

A. M. Huntz, Diffusion dans les couches d'oxyde en cours de croissance, Journal de Physique III, vol.5, issue.11, p.1729, 1995.
DOI : 10.1051/jp3:1995221

URL : https://hal.archives-ouvertes.fr/jpa-00249411

S. C. Tsaï, A. M. Huntz, and J. Philibert, Defects and Diffusion Forum, pp.143-147, 1997.

P. Moulin, F. Armanet, G. Béranger, and P. Lacombe, Relation entre la structure des alliages Ni-Cr 80/20 et leur comportement à l'oxydation à haute température, Mem. Sci. Rev. Met, vol.74, pp.143-160, 1977.

G. Calvarin-amiri, Corrélation entre cinétique d'oxydation, microstructure et comportement mécanique Application à du feuillard Ni-20Cr, 1998.

M. Kemdehoundja, Analyse par microspectroscopie Raman de l'évolution des contraintes de croissances et résiduelles au cours de la formation de films de chromine sur l'alliage Ni-30Cr. Conséquences sur les mécanismes d'endommagement, 2008.

K. P. Lillerud and P. Kofstad, On High Temperature Oxidation of Chromium, Journal of The Electrochemical Society, vol.127, issue.11, p.2397, 1980.
DOI : 10.1149/1.2129478

P. Kofstad and K. P. Lillerud, On High Temperature Oxidation of Chromium, Journal of The Electrochemical Society, vol.127, issue.11, p.2410, 1980.
DOI : 10.1149/1.2129481

M. Soustelle, Modélisation macroscopique des transformations physico-chimiques, 1990.

S. C. Tsaï, Relation entre l'autodiffusion et le mécanisme de croissance des couches d'oxydes de chrome : Effet de l'yttrium, thèse de doctorat, 1995.

P. Hou, V. Chia, and I. Brown, Distribution of ion-implanted yttrium in Cr2O3 scales and in the underlying Ni-25wt.%Cr alloy, Surface and Coatings Technology, vol.51, issue.1-3, pp.1-3
DOI : 10.1016/0257-8972(92)90217-X

G. Moulin, A. M. Huntz, G. Ben-abderrazik, and J. Rousselet, Reactivity of metallic surfaces submitted to aggressive atmospheres, Relation with impurities C and S and with oxide stresses, Reactivity of solids, pp.28-235, 1984.

A. J. Felten and J. , High-Temperature Oxidation of Fe-Cr Base Alloys with Particular Reference to Fe-Cr-Y Alloys, Journal of The Electrochemical Society, vol.108, issue.6, p.490, 1961.
DOI : 10.1149/1.2428122

H. E. Evans, The role of oxide grain boundaries in the development of growth stresses during oxidation, Corrosion Science, vol.23, issue.5, pp.5-495, 1983.
DOI : 10.1016/0010-938X(83)90099-9

F. Ernst, Metal-oxide interfaces, in high temperature oxidation of metals, in international materials review, pp.1-40, 1995.

J. Stringer, Stress generation and relief in growingoxide films, Corrosion Science, vol.10, issue.7, pp.513-543, 1970.
DOI : 10.1016/S0010-938X(70)80036-1

K. Honda, T. Atake, and Y. Saito, Infrared spectra of oxide films on SUS430 stainless steel formed at temperatures between 473 and 1073 K, Journal of Materials Research, vol.7, issue.1, pp.80-84, 1992.
DOI : 10.1557/JMR.1992.0080

B. Dionnet, Influence des contraintes sur l'oxydation dans l'air à haute température d'alliages réfractaires, 1993.

M. Parise, Comparaison de l'oxydation de deux alliages de zirconium par diffraction des rayons X insitu et ex-situ : texture, phase, contrainte, ENSMP, 1996.

H. Behnken, V. Hauk, . Int, and . Conf, Residual Stresses, p.341, 1988.

J. G. Goedjen, J. H. Stout, G. Qiti, and D. A. Shores, Evaluation of stresses in Ni???NiO and Cr???Cr2O3 during high temperature oxidation by in situ X-ray diffraction, Materials Science and Engineering: A, vol.177, issue.1-2, pp.115-124, 1994.
DOI : 10.1016/0921-5093(94)90483-9

J. G. Goedjen, J. H. Stout, Q. Guo, and D. A. Shores, Evaluation of stresses in Ni???NiO and Cr???Cr2O3 during high temperature oxidation by in situ X-ray diffraction, Materials Science and Engineering: A, vol.177, issue.1-2, pp.118-123, 2001.
DOI : 10.1016/0921-5093(94)90483-9

B. R. Barnard, T. R. Watkins, and P. K. Liaw, An evaluation of the use of X-ray residual stress determination as a means of characterizing oxidation damage of Nickel-based, Cr 2 O 3 forming superalloys subjected to various oxidizing conditions, Oxid. Met, pp.74-305, 2010.

J. Birnie, C. Craggs, D. J. Gardiner, and P. R. Graves, Ex-situ and in-situ determination of stress distribution in chromium oxide films by Raman spectroscopy, Corr. Sci, issue.1, pp.1-12, 1992.

J. Mougin, T. Le-bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

A. Norin, Mechanical stresses developed in austenitic Fe-Cr-Ni alloys by oxidation in a CO2 atmosphere, Oxidation of Metals, vol.62, issue.3, p.259, 1975.
DOI : 10.1007/BF00613276

J. Mougin, G. Lucazeau, A. Galerie, and M. Dupeux, Influence of cooling rate and initial surface roughness on the residual stresses in chromia scales thermally grown on pure chromium, Materials Science and Engineering: A, vol.308, issue.1-2, pp.118-123, 2001.
DOI : 10.1016/S0921-5093(00)02037-2

J. Mougin, N. Rosman, G. Lucazeau, and A. Galerie, In-situ Raman monitoring of chromium oxide scale growth, J. Raman Spect, pp.32-739, 2001.

A. M. Huntz, Stresses in NiO, Cr2O3 and Al2O3 oxide scales, Materials Science and Engineering: A, vol.201, issue.1-2, pp.211-228, 1995.
DOI : 10.1016/0921-5093(94)09747-X

J. P. Poirier, Plasticité a haute temperature des solides cristallins, Ed. Eyrolles, 1976.

L. Priester, Joints de grains et plasticité cristalline, Hermes Science Paris, 2011.

D. Delauney and A. M. Huntz, Mechanisms of adherence of alumina scale developed during high-temperature oxidation of Fe-Ni-Cr-Al-Y alloys, Journal of Materials Science, vol.14, issue.7, pp.17-2027, 1982.
DOI : 10.1007/BF00540420

Y. Zhang, W. W. Gerberich, and D. A. Shores, Plastic deformation of oxide scales at elevated temperatures, Journal of Materials Research, vol.245, issue.03, pp.697-705, 1997.
DOI : 10.1007/BF00548172

A. H. Heuer, N. J. Tighe, and R. M. Cannon, Plastic Deformation of Fine-Grained Alumina (Al2O3): II, Basal Slip and Nonaccommodated Grain-Boundary Sliding, Journal of the American Ceramic Society, vol.54, issue.7, pp.53-58, 1980.
DOI : 10.1007/BF00552251

J. Lemaitre and J. L. Chaboche, Mécanique des matériaux solides, 1985.

R. N. Stevens, Grain boundary sliding and diffusion creep, Surface Science, vol.31, pp.31-543, 1972.
DOI : 10.1016/0039-6028(72)90274-9

T. G. Langdon, The effect of surface configuration on grain boundary sliding, Metallurgical Transactions, vol.233, issue.4, pp.797-801, 1972.
DOI : 10.1007/BF02647651

H. J. Frost and M. F. Ashby, Deformation-mechanism Maps, 1982.

B. Panicaud, J. L. Grosseau-poussard, M. Kemdehoundja, and J. F. Dinhut, Mechanical features optimization for oxide films growing on alloy, Computational Materials Science, vol.46, issue.1, pp.42-48, 2009.
DOI : 10.1016/j.commatsci.2009.02.003

L. Clarisse, A. Bataille, Y. Pennec, J. Crampon, and R. Duclos, Investigation of grain boundary sliding during superplastic deformation of a fine-grained alumina by atomic force microscopy, Ceramics International, vol.25, issue.4, pp.25-389, 1999.
DOI : 10.1016/S0272-8842(98)00044-3

W. R. Cannon and O. D. Sherby, Creep behavior and grain-boundary sliding in polycrystalline Al 2 O 3, J. Amer. Ceram. Soc, pp.60-104, 1977.

A. H. Chokshi, An evaluation of the grain-boundary sliding contribution to creep deformation in polycrystalline alumina, Journal of Materials Science, vol.7, issue.69, pp.25-3221, 1990.
DOI : 10.1007/BF00587678

V. K. Tolpygo and D. R. Clarke, Competition between stress generation and relaxation during oxidation of an Fe-Cr-Al-Y alloy, Oxid. Met, pp.49-187, 1998.

J. J. Barnes, J. G. Goedjen, and D. A. Shores, A Model for stress generation and relief in oxide ? Metal systems during a temperature change, Oxidation of Metals, vol.14, issue.5-6, pp.32-449, 1989.
DOI : 10.1007/BF00665449

K. Messaoudi, Croissance et rupture des couches d'alumines développées à haute temperature sur des alliages FeCrAl, 1997.

A. M. Huntz, J. G. Zhao, A. Boumaza, and G. , Parameters affecting oxide adherence in nickel based alloys and techniques allowing estimation of adherence, Materials Science and Technology, vol.82, issue.7, pp.470-478, 1988.
DOI : 10.1007/BF00666471

A. M. Huntz, Scale growth and stress development, Materials Science and Technology, vol.97, issue.11, pp.1079-1088, 1988.
DOI : 10.1016/0254-0584(84)90078-6

A. M. Huntz and M. Schutze, Stresses generated during oxidation sequences and high temperature fracture, Materials at High Temperatures, vol.42, issue.2-3, pp.151-161, 1994.
DOI : 10.1007/BF00572420

F. H. Stott and A. Atkinson, The modelling of growth stresses during high-temperature oxidation, Materials at High Temperatures, vol.5, issue.138, pp.195-207, 1994.
DOI : 10.1007/BF00665449

M. Mouis, Contraintes mécaniques en micro, nano et optoélectronique, Hermes sciences, 2006.

S. Lamri, Etudes des mécanismes d'endommagements des dépôts PVD sous impacts répétés, 2010.

C. Coupeau, P. Goudeau, L. Belliard, M. George, N. Tamura et al., Evidence of plastic damage in thin films around buckling structures, Thin Solid Films, pp.469-470, 2004.

M. W. Moon, J. W. Chung, K. R. Lee, K. H. Oh, R. Wang et al., An experimental study of the influence of imperfections on the buckling of compressed thin films, Acta Materialia, vol.50, issue.5, pp.1219-1227, 2002.
DOI : 10.1016/S1359-6454(01)00423-2

C. Coupeau, From thin film and coating buckling structures to mechanical properties, Materials Science and Engineering: A, vol.483, issue.484, pp.483-484, 2008.
DOI : 10.1016/j.msea.2006.09.181

C. Coupeau, J. F. Naud, F. Cleymand, P. Goudeau, and J. Grilhé, Atomic force microscopy of in situ deformed nickel thin films, Thin Solid Films, vol.353, issue.1-2, pp.194-200, 1999.
DOI : 10.1016/S0040-6090(99)00369-7

M. J. Cordill, N. R. Moody, and D. F. Bahr, The effects of plasticity on adhesion of hard films on ductile interlayers, Acta Materialia, vol.53, issue.9, pp.2555-2562, 2005.
DOI : 10.1016/j.actamat.2005.02.013

J. S. Wang and A. G. Evans, Measurement and analysis of buckling and buckle propagation in compressed oxide layers on superalloy substrates, Acta Materialia, vol.46, issue.14, pp.4993-5005, 1998.
DOI : 10.1016/S1359-6454(98)00172-4

J. S. Wang and A. G. Evans, Effects of strain cycling on buckling, cracking and spalling of a thermally grown alumina on a nickel-based bond coat, Acta Materialia, vol.47, issue.2, pp.47-699, 1999.
DOI : 10.1016/S1359-6454(98)00328-0

V. K. Tolpygo and D. R. Clarke, Spalling failure of ??-alumina films grown by oxidation: I. Dependence on cooling rate and metal thickness, Materials Science and Engineering: A, vol.278, issue.1-2, pp.142-150, 2000.
DOI : 10.1016/S0921-5093(99)00581-X

V. K. Tolpygo and D. R. Clarke, Spalling failure of ??-alumina films grown by oxidation. II. Decohesion nucleation and growth, Materials Science and Engineering: A, vol.278, issue.1-2, pp.151-161, 2000.
DOI : 10.1016/S0921-5093(99)00582-1

M. Kemdehoundja, J. L. Grosseau-poussard, and J. F. Dinhut, Raman microprobe spectroscopy measurements of residual stress distribution along blisters in Cr2O3 thin films, Applied Surface Science, vol.256, issue.9, p.2719, 2010.
DOI : 10.1016/j.apsusc.2009.11.016

H. E. Evans and R. C. Lobb, Conditions for the initiation of oxide-scale cracking and spallation, Corrosion Science, vol.24, issue.3, pp.209-222, 1984.
DOI : 10.1016/0010-938X(84)90051-9

H. J. Engell and F. Wever, Some basic problems of the formation and adherence of scale on iron, Acta. Metall, vol.5, pp.12-695, 1957.

R. Hales and A. C. Hill, The role of metal lattice vacancies in the hightemperature oxidation of nickel, Corrosion Science, vol.12, issue.11, pp.843-853, 1972.
DOI : 10.1016/S0010-938X(72)80013-1

C. Salmon, D. Tiberghein, R. Molins, C. Colin, and F. Delannay, Oxidation behavior in air of thin alloy 601 fibers, pp.271-278, 2000.

P. Y. Hou, Segregation phenomena at growing alumina/alloy interfaces, J. Corr. Sci. Eng, vol.6, p.75, 2003.

R. Molins, I. Rouzou, L. Rémy, K. Le-biavant-guerrierand, and F. Jomard, Study of sulfur distribution in a NiPtAl bondcaoat, pp.22-359, 2005.

A. G. Evans and J. W. Hutchinson, On the mechanics of delamination and spalling in compressed films, International Journal of Solids and Structures, vol.20, issue.5, p.455, 1984.
DOI : 10.1016/0020-7683(84)90012-X

G. Gille and B. Rau, Buckling instability and adhesion of carbon layers, Thin Solid Films, vol.120, issue.2, p.109, 1984.
DOI : 10.1016/0040-6090(84)90365-1

J. W. Hutchinson, Mixed Mode Cracking in Layered Materials, Z. Suo, Adv. Appl. Mech, vol.29, p.63, 1992.
DOI : 10.1016/S0065-2156(08)70164-9

S. Timoshenko, Theory of Elastic Stability, 1936.

H. E. Evans, A. Strawbridge, R. A. Carolan, and C. B. Ponton, Creek effects on the spallation of an alumina layer from a NiCrA1Y coating, Materials Science and Engineering: A, vol.225, issue.1-2, pp.1-8, 1997.
DOI : 10.1016/S0921-5093(96)10881-9

A. G. Evans, M. Rühle, B. J. Dalgleish, and P. G. Charalambides, The fracture energy of biomaterial interfaces, Mater. Sci. Eng, pp.53-64, 1990.

P. Handcock and J. R. Nicholls, Application of fracture mechanics to failure of surface oxide scales, Materials Science and Technology, vol.97, issue.5, pp.398-406, 1988.
DOI : 10.1007/BF00666471

H. E. Evans and A. Strawbridge, The critical strain-energy criterion for oxide spallation-revisited, pp.1-15, 2000.

J. Jedlinski, M. J. Bennett, and H. E. Evans, Experimental data on the spallation of protective oxide scales: a brief literature survey, Materials at High Temperatures, vol.4, issue.2-3, pp.3-169, 1994.
DOI : 10.1007/BF00665258

G. C. Wood and J. Stringer, The adhesion of growing oxide scales to the substrate, Le Journal de Physique IV, vol.03, issue.C9, pp.65-74, 1993.
DOI : 10.1051/jp4:1993904

URL : https://hal.archives-ouvertes.fr/jpa-00252334

P. Laval and E. Felder, Caractérisation de l'adhérence des revêtements par indentation normale et techniques, pp.1-2, 1993.

D. S. Rickerby, A review of the methods for the measurement of coating-substrate adhesion, Surface and Coatings Technology, vol.36, issue.1-2, pp.541-557, 1988.
DOI : 10.1016/0257-8972(88)90181-8

D. Zhu, J. H. Stout, J. C. Nelson, and D. A. Shores, The influence of yttrium on the interfacial fracture resistance in oxide film/Ni-25Cr allow systems, Mater. Sci. Forum, pp.251-254, 1997.

A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, p.163, 1920.
DOI : 10.1098/rsta.1921.0006

A. Strawbridge and H. E. Evans, Mechanical failure of thin brittle coatings, Engineering Failure Analysis, vol.2, issue.2, pp.85-103, 1995.
DOI : 10.1016/1350-6307(95)00014-H

P. Y. Hou and J. Stringer, Oxyde scale adhesion and impurity segregation at the scale/metal interface, Oxid. Met, p.38, 1992.

R. Siab, C. Huvier, M. Kemdehoundja, J. L. Grosseau-poussard, and J. F. Dinhut, On the relation between damage rate and stress level evolution in ??-Cr2O3 thin films growing on Ni???33at%Cr, Corrosion Science, vol.51, issue.9, pp.51-2246, 2009.
DOI : 10.1016/j.corsci.2009.05.032

S. Baleix, G. Bernhart, and P. Lours, Investigation of the Spallation of Oxides Grown on Thermally Cycled Heat Resistant Cast Steels, Materials Science Forum, vol.369, issue.372, pp.327-155, 2002.
DOI : 10.4028/www.scientific.net/MSF.369-372.539

D. P. Whittle and J. Stringer, Improvements in High Temperature Oxidation Resistance by Additions of Reactive Elements or Oxide Dispersions, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.295, issue.1413, p.309, 1980.
DOI : 10.1098/rsta.1980.0124

P. Y. Hou and J. Stringer, The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales, Materials Science and Engineering: A, vol.202, issue.1-2, pp.1-10, 1995.
DOI : 10.1016/0921-5093(95)09798-8

M. S. Li and P. Y. Hou, Improved Cr 2 O 3 adhesion by Ce ion implantation in the presence of interfacial sulfur segregation, Acta. Mater, pp.55-443, 2007.

L. V. Ramanathan, M. Pohl, and A. F. Padilha, The effect of niobium on the oxidation behavior of fully austenitic Fe-15Cr-15Ni stainless steels, Materials and corrosion, vol.41, pp.71-75, 1995.

J. Robertson and M. I. Manning, Limits to adherence of oxide scales, Materials Science and Technology, vol.295, issue.1, p.81, 1990.
DOI : 10.1016/0921-5093(89)90131-7

J. Chao and J. L. Gonzalez-carrasco, The role of the surface roughness on the integrity of thermally generated oxide scales. Application to the Al 2 O 3 /MA956 system, Mater. Sci. Eng, pp.230-269, 1997.

A. Aubry, F. Armanet, G. Béranger, J. L. Lebrun, and G. Maeder, Measurement of residual stresses by X-ray diffraction in a Ni/NiO system obatined by high temperature oxidation, acta Métall, pp.36-2779, 1988.

Y. Madi, E. Salhi, F. Charlot, A. Galerie, and Y. Wouters, Influence of Polishing-Induced Surface Hardening on the Adhesion of Oxide Scales Grown on a Ferritic Stainless Steel, Oxidation of Metals, vol.35, issue.464, pp.167-181, 2011.
DOI : 10.1007/s11085-010-9226-2

URL : https://hal.archives-ouvertes.fr/hal-00640175

A. A. Volinski, N. R. Moody, and W. W. Gerberich, Interfacial toughness measurements for thin films on substrates, Acta Materialia, vol.50, issue.3, pp.50-441, 2002.
DOI : 10.1016/S1359-6454(01)00354-8

C. Coddet and E. Ziane, Mesure d'adhérence, in : Méthodes usuelles de caractérisation des surfaces, Eyrolles, pp.308-315, 1988.

J. Mougin, M. Dupeux, A. Galerie, and L. , Anton, inverted blister test to measure adhesion energy of thermal oxide scales on metal or alloys, Mater. Sci. and Tech, pp.18-1217, 2002.

M. M. Nagl, W. T. Evans, D. J. Hall, and S. R. Saunders, An in-situ investigation of the tensile failure of oxide scales, Oxid. Met, pp.42-431, 1994.

P. Hancock, J. R. Nicholls, and K. Mahmood, The influence of imposed strain rate on fracture of surface oxides, Corrosion Science, vol.35, issue.5-8, pp.979-987, 1993.
DOI : 10.1016/0010-938X(93)90316-9

M. Schütze, Deformation and cracking behavior of protective oxide scales on heat-resistant steels under tensile strain, Oxidation of Metals, vol.24, issue.3-4, pp.199-232, 1985.
DOI : 10.1007/BF00664232

J. Lesage, . Ph, O. Demarecaux, G. Bartier, and . Mesmacque, D??termination de l'adh??rence de rev??tements par le test d'indentation interfaciale, revue de Métallurgie-CIT/SGM, pp.1655-1663, 1993.
DOI : 10.1051/metal/199390121655

L. G. Rosenfeld, J. E. Ritter, T. J. Lardner, and M. R. Lin, Use of the microindentation technique for determining interfacial fracture energy, Journal of Applied Physics, vol.67, issue.7, pp.3291-3296, 1990.
DOI : 10.1063/1.345363

H. E. Evans, Spallation of oxide from stainless steel AGR nuclear fuel cladding: mechanisms and consequences, Materials Science and Technology, vol.25, issue.5, pp.415-420, 1988.
DOI : 10.1016/0010-938X(84)90052-0

P. Y. Hou and A. Atkinson, Methods of measuring adhesion for thermally grown oxide scales, Materials at High Temperatures, vol.5, issue.1, pp.119-125, 1994.
DOI : 10.1111/j.1151-2916.1986.tb04718.x

W. Al-khoury, Etude structural par spectrométrie Mössbauer et diffraction des rayons X d'alliages Fe-Cr à l'état massif et en couches minces. Transformation de phase de la composition equi-atomique, 2006.

J. Schwinger, On the Classical Radiation of Accelerated Electrons, Physical Review, vol.75, issue.12, pp.1912-1925, 1949.
DOI : 10.1103/PhysRev.75.1912

R. Guinebretière, Diffraction des rayons X sur échantillons polycristallins, Hermès science Paris, 2002.

S. Berveiller, B. Malard, J. Wright, E. Patoor, and G. Geandier, In situ synchrotron analysis of lattice rotations in individual grains during stress-induced martensitic transformations in a polycrystalline CuAlBe shape memory alloy, Acta Materialia, vol.59, issue.9, pp.59-3636, 2011.
DOI : 10.1016/j.actamat.2011.02.037

URL : https://hal.archives-ouvertes.fr/hal-01195642

A. S. Budiman, W. D. Nix, N. Tamura, B. C. Valek, K. Gadre et al., Crystal plasticity in Cu damascene interconnect lines undergoing electromigration as revealed by synchrotron x-ray microdiffraction, Applied Physics Letters, vol.88, issue.23, p.233515, 2006.
DOI : 10.1063/1.2210451

K. Chen, N. Tamura, B. C. Valek, and K. N. Tu, Plastic deformation in Al (Cu) interconnects stressed by electromigration and studied by synchrotron polychromatic x-ray microdiffraction, Journal of Applied Physics, vol.104, issue.1, p.13513, 2008.
DOI : 10.1063/1.2952073

K. Chen, N. Tamura, M. Kunz, K. N. Tu, and Y. Lai, measurement of electromigration-induced transient stress in Pb-free Sn???Cu solder joints by synchrotron radiation based x-ray polychromatic microdiffraction, Journal of Applied Physics, vol.106, issue.2, p.23502, 2009.
DOI : 10.1063/1.3157196

N. Tamura, H. A. Padmore, and J. R. Patel, High spatial resolution stress measurements using synchrotron based scanning X-ray microdiffraction with white or monochromatic beam, Materials Science and Engineering: A, vol.399, issue.1-2, pp.92-98, 2005.
DOI : 10.1016/j.msea.2005.02.033

N. Tamura, M. Kunz, K. Chen, R. S. Celestre, A. A. Macdowell et al., A superbend X-ray microdiffraction beamline at the advanced light source, Materials Science and Engineering: A, vol.524, issue.1-2, pp.28-32, 2009.
DOI : 10.1016/j.msea.2009.03.062

J. S. Chung and G. E. Ice, Automated indexing for texture and strain measurement with broad-bandpass x-ray microbeams, Journal of Applied Physics, vol.86, issue.9, pp.86-95, 1999.
DOI : 10.1063/1.371507

P. Goudeau, P. Villain, N. Tamura, and H. A. Padmore, Mesoscale x-ray diffraction measurement of stress relaxation associated with buckling in compressed thin films, Applied Physics Letters, vol.83, issue.1, p.83, 2003.
DOI : 10.1063/1.1591081

J. Villanova, O. Sicardy, R. Fortunier, J. S. Micha, and P. , Bleuet, Determination of global and local residual stresses in SOFC by X-ray diffraction, Nuclear Instruments and Methods in, Physics Research B, vol.268, pp.282-286, 2010.

A. Hugot-le-goff and L. Spectrométrie-raman, Application aux études de corrosion, in : Méthodes usuelles de caractérisation des surfaces, Eyrolles, pp.102-111, 1988.

I. and D. Wolf, Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits, Semiconductor Science and Technology, vol.11, issue.2, pp.139-154, 1996.
DOI : 10.1088/0268-1242/11/2/001

I. C. Noyan and J. B. Cohen, Resuidual stress : measurement by diffraction and interpretation

V. Hauk, Structural and residual stress analysis by non-destructive methods, 1997.

J. Lu, Handbook of measurement of residual stress, Society for experimental mechanics Inc. Lilburn, 1996.

H. Dolle, The influence of multiaxial stress states, stress gradients and elastic anisotropy on the evaluation of (Residual) stresses by X-rays, Journal of Applied Crystallography, vol.12, issue.6, pp.489-501, 1979.
DOI : 10.1107/S0021889879013169

Q. Ma and D. R. Clarke, stress measurements in Single-Crystal and Polycristalline Ceramics using their optical fluorescence, J. Am. Ceram. Soc, pp.76-1433, 1993.

S. Lamri, C. Langlade, G. Kermouche, and V. Martinez, Estimation of the stress relief induced in CrN thin films by buckling, Materials Science and Engineering: A, vol.527, issue.29-30, pp.527-7912, 2010.
DOI : 10.1016/j.msea.2010.08.067

A. Reuss, Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle, Zeitschrift für angewandte Mathematik und Mechanik, pp.49-49, 1929.

B. Panicaud, Contraintes " de croissance " et cinétiques d'oxydation dans des couches d'oxydes thermiques de Fer et de Nickel; Etude in-situ par Diffraction des rayons X et modélisation, 2004.

K. L. Luthra and C. L. Briant, Mechanism of adhesion of alumina on MCrAlY alloys, Oxidation of Metals, vol.62, issue.5-6, p.397, 1986.
DOI : 10.1007/BF00659344

S. Margueron and F. Lepoutre, Determination by piezospectroscopy of residual stresses in alumina scales at the interface of thermal barrier coatings, 45ème Colloque de Métallurgie " Surfaces, Interfaces et rupture, pp.25-27, 2002.

H. Echsler, E. A. Martinez, L. Singheiser, and W. J. Quadakkers, Residual stresses in alumina scales grown on different types of Fe???Cr???Al alloys: effect of specimen geometry and cooling rate, Materials Science and Engineering A, vol.384, issue.1-2, pp.384-385, 2004.
DOI : 10.1016/S0921-5093(04)00887-1

D. M. Lipkin, D. R. Clarke, M. Hollatz, M. Bobeth, and W. Pompe, Stress development in alumina scales formed upon oxidation of (111) NiAl single crystals, Corrosion Science, vol.39, issue.2, pp.39-231, 1997.
DOI : 10.1016/S0010-938X(97)83344-6

E. Schumann, C. Sarioglu, J. R. Blachere, F. S. Pettit, and G. H. Meier, High-temperature stress measurements during the oxidation of NiAl, Oxid. Met, pp.53-259, 2000.

P. Goudeau, N. Tamura, G. Parry, J. Colin, C. Coupeau et al., Strain mapping on gold thin film buckling and silicon blistering, Mater. Res. Soc. Symp. Proc, vol.875, pp.263-268, 2005.

A. P. Paulikas, J. Linton, G. Jennings, and B. W. Veal, Growth strains in chromium oxide grown on Fe-Ni-Cr alloys : Test of Rhines-Wolf model of oxide growth, Argonne National Laboratory report Materials Science/Condensed-Matter Physics, 2003.

O. Thomas, A. Ponchet, and S. Forest, Mechanics of Nano-Objects, collection sciences de la matière Local strain measurements : X-ray micro-laue and Bragg coherent diffraction techniques, 2011.

W. Boyd, . Veal, P. Arvydas, P. Y. Paulikas, and . Hou, Tensile stress and creep in thermally grown oxide, nature materials, vol.5, 2006.

B. W. Veal, A. P. Paulikas, B. Gleeson, and P. Y. Hou, Creep in ?-Al 2 O 3 thermally grown on ?-NiAl and NiAlPt alloys, Surf. Coat. Tech, pp.202-608, 2007.

B. W. Veal, A. P. Paulikas, and P. Y. Hou, Creep in protective ?-Al 2 O 3 thermally grown on ?-NiAl, Appl. Phys. Lett, pp.90-121914, 2007.

V. K. Tolpygo and D. R. Clarke, Wrinkling of ??-alumina films grown by oxidation???II. Oxide separation and failure, Acta Materialia, vol.46, issue.14, p.5167, 1998.
DOI : 10.1016/S1359-6454(98)00134-7

P. Y. Hou, R. M. Cannon, H. Zhang, and R. L. Williamson, Fundamental Aspects of High Temperature Corrosion, Proceedings of the E. C. S, pp.96-122, 1997.

D. R. Lide, CRC Handbook of chemistry and physics, 1994.

H. L. Alberts and J. C. Boyens, The elastic constants and distance dependence of the magnetic interactions of Cr 2 O 3, Journal of magnetism and magnetic materials, 1976.