.. Optimisation-d-'une-fonction-coût, 116 4.3.2.1 Description de différents schémas d'optimisation . . 116 4.3.2.2 Formulation retenue

G. Ameta, J. K. Davidson, and J. J. Shah, Using Tolerance-Maps to Generate Frequency Distributions of Clearance and Allocate Tolerances for Pin-Hole Assemblies, Journal of Computing and Information Science in Engineering, vol.7, issue.4, pp.347-359, 2007.
DOI : 10.1115/1.2795308

L. Andolfato, F. Thiébaut, M. Douilly, and C. , Lartigue : On neural networks' ability to approximate geometrical variation propagation in assembly, 12th CIRP Conference on Computer Aided Tolerancing, pp.26-44, 2012.

B. Anselmetti and M. Radouani, Calcul statistique des chaînes de cotes avec des distributions hétérogènes non indépendantes, Conception et Production Intégrées : CPI, 2003. (Cité en, p.37

S. Au and J. L. Beck, Estimation of small failure probabilities in high dimensions by subset simulation, Probabilistic Engineering Mechanics, vol.16, issue.4, pp.263-277, 2001.
DOI : 10.1016/S0266-8920(01)00019-4

A. Ballu, J. Plantec, and L. Mathieu, Geometrical reliability of overconstrained mechanisms with gaps, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.159-162, 2008.
DOI : 10.1016/j.cirp.2008.03.038

P. Beaucaire, N. Gayton, E. Duc, and J. , Dantan : Statistical tolerance analysis of over-constrained mechanisms using system reliability methods, Computer Aided Design, Under review, pp.2013-83

P. Beaucaire, N. Gayton, E. Duc, M. Lemaire, and J. , Dantan : Statistical tolerance analysis of a hyperstatic mechanism, using system reliability methods, Computers and Industrial Engineering, pp.2012-83

T. W. Benanzer, V. Ramana, W. P. Grandhi, and . Krol, Reliabilitybased optimization of design variance to identify critical tolerances Advances Engineering Software, pp.305-311, 2009.

A. Bender, Statistical tolerancing as it relates to quality control and the designer, SAE transactions, vol.77, pp.1965-1971, 1968.

G. Blatman, An adaptive algorithm to build up sparse polynomial chaos expansions for stochastic finite element analysis, Probabilistic Engineering Mechanics, vol.25, issue.2, pp.183-197
DOI : 10.1016/j.probengmech.2009.10.003

E. Borgonovo, A new uncertainty importance measure. Reliability Engineering and System Safety, pp.771-784, 2007.

P. Bourdet, L. Mathieu, and C. Lartigue, The concept of the small displacement torsor in metrology Advanced Mathematical Tools in Metrology II, Series Advances in Mathematics for Applied Sciences, pp.110-122, 1996.

P. Bourdet and F. Schneider, Spécification géométrique des produits. Cotation et tolérancement ISO, Dunod/Industries et Technologies, 2007.

J. Bourinet, F. Deheeger, and M. Lemaire, Assessing small failure probabilities by combined subset simulation and Support Vector Machines, Structural Safety, vol.33, issue.6, pp.343-353
DOI : 10.1016/j.strusafe.2011.06.001

C. G. Bucher and U. , A fast and efficient response surface approach for structural reliability problems, Structural Safety, vol.7, issue.1, pp.57-66, 1990.
DOI : 10.1016/0167-4730(90)90012-E

F. Charue-duboc, Des savoirs en action Contributions de la recherche en gestion . l'Harmattan, 1995.

N. D. Cox, How to Perform Statistical Tolerance Analysis Asqc Basic References in Quality Control : Statistical Techniques, 1986.

J. Dantan, L. Mathieu, A. Ballu, and P. Martin, Tolerance synthesis: quantifier notion and virtual boundary, Computer-Aided Design, vol.37, issue.2, pp.231-240, 2005.
DOI : 10.1016/j.cad.2004.06.008

J. Dantan and A. Qureshi, Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation, Computer-Aided Design, vol.41, issue.1, pp.1-12, 2009.
DOI : 10.1016/j.cad.2008.11.003

P. K. Das and Y. , Cumulative formation of response surface and its use in reliability analysis, Probabilistic Engineering Mechanics, vol.15, issue.4, pp.309-315, 2000.
DOI : 10.1016/S0266-8920(99)00030-2

A. Der-kiureghian and P. L. Liu, Structural Reliability under Incomplete Probability Information, Journal of Engineering Mechanics, vol.112, issue.1, pp.85-104, 1986.
DOI : 10.1061/(ASCE)0733-9399(1986)112:1(85)

D. Zaino, Statistical tolerancing using a modification of taguchi's method, Technometrics, vol.30, issue.4, pp.397-405, 1988.

A. Desrochers, Modeling three dimensional tolerance zones using screw parameters, 25th design automation conference, 1999.

O. Ditlevsen, P. Bjerager, R. Olesen, and A. M. , Directional simulation in Gaussian processes, Probabilistic Engineering Mechanics, vol.3, issue.4, pp.207-217, 1988.
DOI : 10.1016/0266-8920(88)90013-6

O. D. Ditlevsen and H. O. Madsen, Structural Reliability Methods, pp.14-16, 1996.

X. Du, Unified Uncertainty Analysis by the First Order Reliability Method, Journal of Mechanical Design, vol.130, issue.9, 2008.
DOI : 10.1115/1.2943295

B. Echard, N. Gayton, and M. Lemaire, AK-MCS: An active learning reliability method combining Kriging and Monte Carlo Simulation, Structural Safety, vol.33, issue.2, pp.145-154
DOI : 10.1016/j.strusafe.2011.01.002

D. H. Evans, Statistical tolerancing : The state of the art. part ii. methods for estimating moments, Journal of Quality Technology, vol.7, issue.32, pp.1-12, 1975.

N. Gayton, P. Beaucaire, J. Bourinet, E. Duc, M. Lemaire et al., APTA: advanced probability-based tolerance analysis of products, M??canique & Industries, vol.12, issue.2, pp.71-85
DOI : 10.1051/meca/2011014

N. Gayton, P. Beaucaire, E. Duc, and M. Lemaire, The apta method for the tolerance analysis of products -comparison of capability-based tolerance and inertial tolerance, Asian International Journal of Science and Technology in Production and Manufacturing EngineeringAIJSTPME), vol.4, issue.3, pp.24-36

N. Gayton, J. Bourinet, and M. Lemaire, CQ2RS: a new statistical approach to the response surface method for reliability analysis, Structural Safety, vol.25, issue.1, pp.99-121, 2003.
DOI : 10.1016/S0167-4730(02)00045-0

A. Genz, Numerical Computation of Multivariate Normal Probabilities, Journal of Computational and Graphical Statistics, vol.1, issue.2, pp.141-149, 1992.
DOI : 10.1007/978-1-4613-9655-0

R. G. Ghanem and P. D. Spanos, Stochastic Finite Elements : A Spectral Approach, 1991.
DOI : 10.1007/978-1-4612-3094-6

M. Giordano, P. Hernandez, and D. Denimal, Synthesis and statistical analysis for three-dimensional tolerancing, CAT2009 11th CIRP International conferance on Computer Aided Tolerancing, 2009.

M. Giordano, L. Mathieu, and F. Villeneuve, Product Life-Cycle Management. Geometric Variations, 2010.

C. G. Glancy and K. W. , Chase : A second-order method for assembly tolerance analysis, Proceedings of the ASME Design Engineering Technical Conferences, pp.21-44, 1999.

. Graves and . Bisgaard, FIVE WAYS STATISTICAL TOLERANCING CAN FAIL, AND WHAT TO DO ABOUT THEM, Quality Engineering, vol.121, issue.1, pp.85-93, 2000.
DOI : 10.1080/08982119708919150

W. H. Greenwood and K. W. , Chase : A new tolerance analysis method for designers and manufacturers. Transaction of the ASME, pp.112-116, 1987.

A. Hasofer and N. Lind, Exact and invariant second-moment code format, Journal of the Engineering Mechanics, vol.100, issue.1, pp.111-121, 1974.

J. E. Hurtado, An examination of methods for approximating implicit limit state functions from the viewpoint of statistical learning theory, Structural Safety, vol.26, issue.3, pp.271-293, 2004.
DOI : 10.1016/j.strusafe.2003.05.002

B. Iooss, Revue sur l'analyse de sensibilité globale de modèles numériques, Journal de la Société Françiase de Statistique, 2010.

J. Jacques, Contributions à l'analyse de sensibilité et à l'analyse discriminante généralisée, Thèse de doctorat, 2005.

T. Jansson, L. Nilsson, and R. Moshfegh, Reliability analysis of a sheet metal forming process using Monte Carlo analysis and metamodels, Journal of Materials Processing Technology, vol.202, issue.1-3, pp.255-268, 2008.
DOI : 10.1016/j.jmatprotec.2007.09.005

. Jeang, Computer-aided tolerance synthesis with statistical method and optimization techniques Quality and reliability engineering international, pp.131-139, 2001.
DOI : 10.1002/qre.387

J. M. Gilbert, I. M. Bell, and D. R. Johnson, Circuit design optimization based on quality cost estimayion, Quality and Reliability Engineering International, vol.21, pp.365-386, 2005.

N. L. Johnson, Tables to facilitate fitting SU frequency curves, Biometrika, vol.52, issue.3-4, pp.547-558, 1965.
DOI : 10.1093/biomet/52.3-4.547

N. L. Johnson, E. Nixon, and D. E. Amos, Table of percentage points of pearson purves, for ? ? 1 and ? 2 expressed in standard measure, Biometrika, vol.50, issue.3, p.459, 1963.

D. Karian, Fitting Statistical Distributions : The Generalized Lambda Distribution and Generalized Bootstrap Methods, 2000.
DOI : 10.1201/9781420038040

C. Kim, THE USE OF RESPONSE SURFACE DESIGNS IN THE SELECTION OF OPTIMUM TOLERANCE ALLOCATION, Quality Engineering, vol.31, issue.1, p.116, 2000.
DOI : 10.1115/1.2831121

W. Lee and T. C. Woo, Tolerances: Their Analysis and Synthesis, Journal of Engineering for Industry, vol.112, issue.2, pp.113-121, 1990.
DOI : 10.1115/1.2899553

M. Lemaire, Structural Reliability, pp.11-16, 2009.
DOI : 10.1002/9780470611708

J. Leung, Methodology for evaluating statistical tolerancing strategies, 11th CIRP Conference on Computer Aided Tolerancing, 2009.

M. Mansuy, M. Giordano, and P. Hernandez, A Generic Method for the Worst Case and Statistical Tridimensional Tolerancing Analysis, 12th CIRP Conference on Computer Aided Tolerancing, pp.34-44, 2012.
DOI : 10.1016/j.procir.2013.08.042

L. Mathieu and F. Villeneuve, Tolérancement géométrique des produits, Hermès, Lavoisier, 2007.

R. E. Melchers, Radial Importance Sampling for Structural Reliability, Journal of Engineering Mechanics, vol.116, issue.1, pp.189-203, 1990.
DOI : 10.1061/(ASCE)0733-9399(1990)116:1(189)

A. Nataf, Détermination des distributions dont les marges sont données Comptes Randus de l'Académie des Sciences, pp.42-43, 1962.

S. D. Nigam and J. U. Turner, Review of statistical approaches to tolerance analysis, Computer-Aided Design, vol.27, issue.1, pp.6-15, 1995.
DOI : 10.1016/0010-4485(95)90748-5

. Pillet, Inertial tolerancing. The Total Quality Management Magazine, pp.202-209, 2004.
DOI : 10.1108/09544780410532918

URL : https://hal.archives-ouvertes.fr/hal-00372594

E. Polak, Algorithms and Consistent Approximations, pp.120-143, 1997.

A. J. Qureshi, J. Dantan, V. Sabri, P. Beaucaire, and N. Gayton, A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation, Computer-Aided Design, vol.44, issue.2, pp.132-142
DOI : 10.1016/j.cad.2011.10.004

A. Saltelli, S. Tarantola, F. Campolongo, and M. Ratto, Sensitivity Analysis in Practice : A Guide to Assessing Scientific Models, 2004.
DOI : 10.1002/0470870958

G. J. Savage, D. Tong, and S. M. Carr, Optimal mean and tolerance allocation using conformance-based design. Quality and Reliability Engineering International, pp.445-472, 2006.
DOI : 10.1002/qre.721

F. Scholtz, Tolerance Stack Analysis Methods, pp.37-38, 1995.

J. Victor, . Skowronski, U. Joshua, and . Turner, Using monte-carlo variance reduction in statistical tolerance synthesis, Computer-Aided Design, vol.29, issue.120, pp.63-69, 1997.

I. M. Sobol, Sensitivity estimates for nonlinear mathematical models, Mathematical Modelling and Computational Experiments, vol.1, pp.407-414, 1993.

A. Stockinger and H. Meerkamm, Concept for the integration of manufacturing simulations into tolerance analysisoperations on polytopes : application to tolerance analysis, 112th CIRP Conference on Computer Aided Tolerancing, 2009.

B. Sudret and A. Der-kiureghian, Comparison of finite element reliability methods, Probabilistic Engineering Mechanics, vol.17, issue.4, pp.337-348, 2002.
DOI : 10.1016/S0266-8920(02)00031-0

D. A. Swan and J. Savage, Continuous Taguchi???a model-based approach to Taguchi's ???quality by design??? with arbitrary distributions, Quality and Reliability Engineering International, vol.14, issue.1, pp.29-41, 1998.
DOI : 10.1002/(SICI)1099-1638(199801/02)14:1<29::AID-QRE144>3.0.CO;2-A

G. Taguchi, Introduction to Quality Engineering Unipub : White Plains, 1989.

D. Teissandier and V. Delos, Algorithm to calculate the Minkowski sums of 3-polytopes based on normal fans, Computer-Aided Design, vol.43, issue.12, pp.1567-1576
DOI : 10.1016/j.cad.2011.06.016

URL : https://hal.archives-ouvertes.fr/hal-00635842

D. Teissandier, V. Delos, and Y. Couétard, Operations on polytopes: application to tolerance analysis, CAT1999 6th CIRP International conferance on Computer Aided Tolerancing, 1999.
DOI : 10.1007/978-94-017-1705-2_43

URL : https://hal.archives-ouvertes.fr/hal-00604749

P. Thoft-christensen and Y. Murotsu, Application of Structural Systems Reliability Theory, 1986.
DOI : 10.1007/978-3-642-82764-8

A. C. Thornton, A Mathematical Framework for the Key Characteristic Process, Research in Engineering Design, vol.11, issue.3, pp.145-157, 1999.
DOI : 10.1007/s001630050011

F. Wu, J. Dantan, A. Etienne, A. Siadat, and P. Martin, Improved algorithm for tolerance allocation based on Monte Carlo simulation and discrete optimization, Computers & Industrial Engineering, vol.56, issue.4, pp.1402-1413, 2009.
DOI : 10.1016/j.cie.2008.09.005

O. P. Yadav and S. S. Bhamare, Reliability-based robust design optimization: A multi-objective framework using hybrid quality loss function, Quality and Reliability Engineering International, vol.22, issue.1, pp.27-41, 2010.
DOI : 10.1080/08982110902762626

Y. Zhang, A. Der-kiureghian, R. Rackwitz, G. Augusti, and A. Bori, Two improved algorithms for reliability analysis éditeurs : Reliability and optimization of structural systems, Proceedings of the 6th IFIP WG7.5 Working Conference on reliability and optimization of structural systems, 1995.

Z. Zou and E. Morse, A gap-based approach to capture fitting conditions for mechanical assembly, Computer-Aided Design, vol.36, issue.8, pp.691-700, 2004.
DOI : 10.1016/S0010-4485(03)00156-8