Contribution to the Control of the Hybrid Excitation Synchronous Machine for Embedded Applications - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2012

Contribution to the Control of the Hybrid Excitation Synchronous Machine for Embedded Applications

Contribution à la commande d’une machine synchrone à double excitation pour des applications embarquées

Résumé

This thesis is a contribution to the control of the Hybrid Excitation Synchronous Machine (HESM) in embedded applications. The HESM combines the advantages of the Permanent Magnets (PM) machine and the wound rotor machine. The excitation flux in this machine is produced by two different sources: the PMs and a DC field winding that is placed at the stator to preserve a brushless structure. The latter source is used to control the flux in the air gap. The machine model is based on a Park model and takes into account the iron losses and the magnetic circuit saturation effect. The electric parameters of the laboratory prototype are identified. The machine is controlled in generator mode and motor mode. In power generation system, the study treats in particular the aircraft power supply in more electric aircrafts. Two distribution networks are studied: High voltage variable frequency network and high voltage DC network. In the latter case, the HESM is coupled to a diode bridge rectifier. In both cases, the control aims to maintain the output voltage magnitude equal to its reference via action on the field current only. The control is scalar. Simulation with Matlab/Simulink and experiments validate the approach. For the motor mode, the attention is paid to the electric propulsion in an electric vehicle. An optimal current control with minimal losses is elaborated. The copper losses are considered in a first place. Iron losses are added next. Finally, the optimization problem is extended and it includes the losses due to the inverter and the chopper. Analytical expressions of the reference armature and field currents are computed using extended Lagrange multiplier method (Kuhn-Tucker conditions). Simulation with Matlab/Simulink software proves that the analytical solution yields indeed to the current combination that guarantees the minimal losses over the New European Driving Cycle.
Le travail présenté dans cette thèse est une contribution à la commande de la Machine Synchrone à Double Excitation (MSDE) pour des applications embarquées. La MSDE allie les avantages de la machine synchrone à aimants permanents et la machine synchrone à rotor bobiné. Le flux d'excitation dans cette machine est généré par deux sources : les aimants permanents et un enroulement qui est placé au stator afin d'éviter les contacts glissants. Cette dernière source permet de régler le flux dans l'entrefer. Le modèle de la machine est basé sur un modèle de Park et prend en considération les pertes fer et la saturation des circuits magnétiques. Les paramètres du prototype existant au laboratoire ont été identifiés. La commande de la MSDE est effectuée en deux modes : générateur et moteur. En génératrice, l'application visée est la génération électrique en avionique. Deux réseaux de distribution sont traités : Réseau à haute tension et à fréquence variable et réseau haute tension DC. Dans ce dernier cas, la MSDE est associée à un pont redresseur à diodes. Dans les deux cas, la commande est élaborée dans le but de maintenir l'amplitude de la tension constante via le control du courant d'excitation uniquement. Le control est scalaire. L'approche est validée par simulation avec Matlab/Simulink et par expérimentation. Pour le mode moteur, l'application visée est la propulsion dans un véhicule électrique. Une commande optimale des courants est étudiée en vue de minimiser les pertes. Les pertes joules sont considérées premièrement. Ensuite, les pertes fer sont ajoutées. Finalement, le problème de minimisation est étendu pour inclure les pertes dues à l'onduleur et au hacheur. L'optimisation par la méthode des multiplicateurs de Lagrange (Kuhn-Tucker conditions) est utilisée pour trouver des expressions analytiques des courants statoriques et inducteur optimaux. Des simulations avec Matlab/Simulink prouvent que la solution obtenue est celle qui assure les pertes minimales tout au long du nouveau cycle de conduite européen.
Fichier principal
Vignette du fichier
Rita.pdf (3.91 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00837741 , version 1 (27-11-2014)

Identifiants

  • HAL Id : tel-00837741 , version 1

Citer

Rita Mbayed. Contribution to the Control of the Hybrid Excitation Synchronous Machine for Embedded Applications. Other. Université de Cergy Pontoise, 2012. English. ⟨NNT : 2012CERG0604⟩. ⟨tel-00837741⟩
673 Consultations
1478 Téléchargements

Partager

Gmail Facebook X LinkedIn More