A.3: Définition des discontinuités du premier prisme ,
Finite element limit analysis using linear programming, International Journal of Solids and Structures, vol.8, issue.12, 1972. ,
DOI : 10.1016/0020-7683(72)90088-1
On Polyhedral Approximations of the Second-Order Cone, Mathematics of Operations Research, vol.26, issue.2, pp.193-205, 2001. ,
DOI : 10.1287/moor.26.2.193.10561
Lectures on Modern Convex Optimization, Analysis, Algorithms and Engineering Applications. SIAM-MPS. Series on Optimization, 2001. ,
DOI : 10.1137/1.9780898718829
A local criterion for cleavage fracture of a nuclear pressure vessel steel, Metallurgical Transactions A, vol.14, issue.11, pp.2277-2287, 1983. ,
DOI : 10.1007/BF02663302
Modeling of crack growth in round bars and plane strain specimens, International Journal of Solids and Structures, vol.38, issue.46-47, pp.8259-8284, 2001. ,
DOI : 10.1016/S0020-7683(01)00167-6
Yield criteria for quasibrittle and frictional materials, International Journal of Solids and Structures, vol.41, issue.11-12, pp.2855-2878, 2003. ,
DOI : 10.1016/j.ijsolstr.2003.12.024
Theory of plasticity, Etudes en mécanique des matériaux et des structures, MacGraw-Hill International Editions, Engineering Mechanics Series, 1987. ,
A linked FEM-damage percolation model of aluminum alloy sheet forming, International Journal of Plasticity, vol.19, issue.12, pp.2099-2120, 2003. ,
DOI : 10.1016/S0749-6419(03)00061-5
Introduction à l'optimisation, 1994. ,
Linear programming and extensions, 1963. ,
DOI : 10.1515/9781400884179
Damage models for studying ductile matrix failure in composites, Computational Materials Science, vol.32, issue.3-4, pp.329-336, 2005. ,
DOI : 10.1016/j.commatsci.2004.09.035
Prévision du comportement plastique des matériaux hétérogènes à constituants métalliques Application aux composites à matrice métallique à fibres continues et aux plaques perforées, Thèse de l'Université Joseph Fourier, 1994. ,
Lower and upper numerical bounds to the off-axis strength of unidirectional fiber reinforced composites by limit analysis methods, Eur. J. Mech, vol.16, pp.213-234, 1997. ,
??tude du crit??re de plasticit?? des mat??riaux poreux, Série II b, pp.753-760, 2001. ,
DOI : 10.1016/S1620-7742(01)01396-4
Ductile failure of cylindrically porous materials. Part I: plane stress problem and experimental results, European Journal of Mechanics - A/Solids, vol.23, issue.2, pp.181-190, 2004. ,
DOI : 10.1016/j.euromechsol.2003.12.001
The logarithmic potential method of convex programming, 1955. ,
Damage analysis of aluminum matrix composite considering non-uniform distribution of SiC particles, Acta Materialia, vol.46, issue.9, pp.3125-3133, 1998. ,
DOI : 10.1016/S1359-6454(98)00004-4
Etude des méthodes de point intérieur appliquées à la programmation linéaire et à la programmation semidéfinie. Faculté Polytechnique de Mons, 1997. ,
Recent extentions of Gurson's model for porous ductile metals, Continuum Micromechanics. CISM Lecture Series, pp.61-130, 1997. ,
Theoretical models for void coalescence in porous ductile solids. I. Coalescence ???in layers???, International Journal of Solids and Structures, vol.38, issue.32-33, pp.5581-5594, 2001. ,
DOI : 10.1016/S0020-7683(00)00354-1
Plastic flow and fracture of ductile materials incorporating void nucleation, growth and interaction, 1975. ,
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977. ,
DOI : 10.1115/1.3443401
Ductile fracture of duplex stainless steel with casting defects, International Journal of Pressure Vessels and Piping, vol.78, issue.9, pp.607-616, 2001. ,
DOI : 10.1016/S0308-0161(01)00069-2
Forging simulation of sintered powder compacts under various frictional conditions, International Journal of Mechanical Sciences, vol.44, issue.3, pp.489-507, 2002. ,
DOI : 10.1016/S0020-7403(01)00107-2
Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys, Acta Materialia, vol.53, issue.9, pp.2739-2749, 2002. ,
DOI : 10.1016/j.actamat.2005.02.037
A new polynomial-time algorithm for linear programming, Combinatorica, vol.244, issue.S, pp.373-395, 1984. ,
DOI : 10.1007/BF02579150
Strain Hardening Response of Sintered Porous Iron Tubes With Various Initial Porosities Under Combined Tension and Torsion, Journal of Engineering Materials and Technology, vol.114, issue.2, pp.213-217, 1992. ,
DOI : 10.1115/1.2904164
Void growth and coalescence in porous plastic solids, International Journal of Solids and Structures, vol.24, issue.8, pp.835-853, 1988. ,
DOI : 10.1016/0020-7683(88)90051-0
A new discontinuous upper bound limit analysis formulation, International Journal for Numerical Methods in Engineering, vol.56, issue.7, pp.1069-1088, 2005. ,
DOI : 10.1002/nme.1314
Rupture fragile et rupture ductile, Série II b, pp.243-250, 1998. ,
DOI : 10.1016/S1251-8069(98)80033-X
Mécanique de la rupture fragile et ductile. Etudes en mécanique des matériaux et des structures, 2003. ,
DOI : 10.1016/s1251-8069(98)80033-x
A modified Beremin model to simulate the warm pre-stress effect, Nuclear Engineering and Design, vol.216, issue.1-3, pp.27-42, 2002. ,
DOI : 10.1016/S0029-5493(02)00067-5
Linearization of second-order cone optimization problems and application to limit analysis in mechanical analysis, Conf. on quantitative methods for decision making, 2002. ,
Theoretical, numerical and identification aspects of a new model class for ductile damage, International Journal of Plasticity, vol.18, issue.7, pp.801-831, 2000. ,
DOI : 10.1016/S0749-6419(00)00105-4
A computational scheme for linear and non???linear composites with arbitrary phase contrast, International Journal for Numerical Methods in Engineering, vol.58, issue.12, pp.139-160, 2001. ,
DOI : 10.1002/nme.275
Interior point polynomial methods in convex programming, 1994. ,
An extended model for void growth and coalescence, Journal of the Mechanics and Physics of Solids, vol.48, issue.12, pp.2467-2512, 2000. ,
DOI : 10.1016/S0022-5096(00)00019-3
Densification of sintered molybdenum during hot upsetting: experiments and modelling, Materials Science and Engineering: A, vol.264, issue.1-2, pp.17-25, 1999. ,
DOI : 10.1016/S0921-5093(98)01118-6
Simulation of hot forming processes of refractory metals using porous metal plasticity models, International Journal of Refractory Metals and Hard Materials, vol.20, issue.4, pp.287-293, 2002. ,
DOI : 10.1016/S0263-4368(02)00028-8
Résolution d'un problème d'optimisation à contraintes linéaires et quadratiques par une méthode de point intérieur : application à l'analyse limite, 2001. ,
Solving limit analysis problems: an interior-point method, Communications in Numerical Methods in Engineering, vol.330, issue.4, 2005. ,
DOI : 10.1002/cnm.779
Application de la théorie de l'analyse limite aux milieux isotropes et orthotropes de revolution, Thèse de l'université scientifique et médicale et de l'institut polytechnique de Grenoble, 1983. ,
Analyse limite et optimisation, 2004. ,
Yield criteria for porous media in plane strain: second-order estimates versus numerical results, Comptes Rendus M??canique, vol.330, issue.11, pp.741-747, 2002. ,
DOI : 10.1016/S1631-0721(02)01526-7
Limit analysis in axisymmetrical problems: Numerical determination of complete statical solutions, International Journal of Mechanical Sciences, vol.24, issue.2, pp.95-117, 1982. ,
DOI : 10.1016/0020-7403(82)90041-8
Solution of anisotropic plasticity problems by using associated isotropic problems, International Journal of Plasticity, vol.6, issue.2, pp.143-168, 1990. ,
DOI : 10.1016/0749-6419(90)90019-B
Limit analysis and new methods of optimization, Vth NUMGE (Vth European Conference Numerical Methods in Geotechnical Engineering). P, 2002. ,
Ductile failure of cylindrically porous materials. Part II: other cases of symmetry, European Journal of Mechanics - A/Solids, vol.23, issue.2, pp.191-201, 2004. ,
DOI : 10.1016/j.euromechsol.2003.12.002
Transferability of fracture parameters from specimens to component level, International Journal of Pressure Vessels and Piping, vol.82, issue.5, pp.386-399, 2005. ,
DOI : 10.1016/j.ijpvp.2004.10.003
Plasticity criterion for porous medium with cylindrical void, Comptes Rendus M??canique, vol.330, issue.11, pp.763-768, 2002. ,
DOI : 10.1016/S1631-0721(02)01527-9
URL : https://hal.archives-ouvertes.fr/cea-00412644
Contribution à l'étude théorique et numérique de la rupture ductile des métaux, 1992. ,
Second-order homogenization estimates for nonlinear composites incorporating field fluctuations: I???theory, Journal of the Mechanics and Physics of Solids, vol.50, issue.4, pp.737-757, 2002. ,
DOI : 10.1016/S0022-5096(01)00099-0
On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969. ,
DOI : 10.1016/0022-5096(69)90033-7
Alcoal Technical Center Memorandum Void growth in elastic-plastic materials, J. Appl. Mech, vol.56, pp.309-317, 1985. ,
Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987. ,
DOI : 10.1016/0029-5493(87)90234-2
Approche locale de la mécanique de la rupture : état de l'art, 2001. ,
Théorie de la plasticité pour les applications à la mécanique des sols, 1974. ,
Calcul à la rupture et analyse limite, 1983. ,
Identification of material parameters of the Gurson???Tvergaard???Needleman model by combined experimental and numerical techniques, Computational Materials Science, vol.33, issue.4, pp.501-509, 2005. ,
DOI : 10.1016/j.commatsci.2005.02.002
Interior-Point Methods in convex optimization. CIUF-CUD summer school on optimization and applied mathematics, 2002. ,
Plasticité et Homogénéisation, Thèse de doctorat d'état, 1982. ,
Analyse limite et homogénéisation, C. R. Acad. Sci. Paris, vol.296, pp.1355-1358, 1983. ,
A lower bound approach to the yield loci of porous materials, Acta Mech. Sinica, vol.5, issue.3, pp.237-243, 1989. ,
Ductile to brittle transition of an A508 steel characterized by Charpy impast test. Part II : modeling of the Charpy transition curve. Engng. Fracture Mech, pp.413-434, 2004. ,
Analyse limite : application aux structures et aux matériaux poreux, Thèse de Mécanique, 1997. ,
Three-dimensional models for the plastic limit-loads at incipient failure of the intervoid matrix in ductile porous solids, Acta Metallurgica, vol.33, issue.6, pp.1079-1085, 1985. ,
DOI : 10.1016/0001-6160(85)90201-9
A study of search directions in interior-point methods for semidefinite programming . Optimization methods and software, pp.1-46, 1999. ,
Détermination du convexe de résistance d'un matériau poreux dans le cas de la traction-torsion et du cas axisymétrique, 2002. ,
Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.6, issue.4, pp.389-407, 1981. ,
DOI : 10.1007/BF00036191
Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984. ,
DOI : 10.1016/0001-6160(84)90213-X
Computational experience with a primal-dual interior-point method for smooth convex programming. Optimization Methods and Software, pp.285-310, 1994. ,
A study of extrusion of sintered powder metals, International Journal of Mechanical Sciences, vol.38, issue.1, 1996. ,
DOI : 10.1016/0020-7403(95)00032-S