R. P. Feymann, There's plenty of room at the bottom [data storage], Journal of Microelectromechanical Systems, vol.1, issue.1, pp.60-66, 1992.
DOI : 10.1109/84.128057

L. Bernard, World's smallest silicon mechanical devices are made at Cornell, 1997.

L. S. Fan, Y. C. Tai, and R. S. Muller, IC-processed electrostatic micromotors, Sensors and Actuators, vol.20, issue.1-2, pp.41-47, 1989.
DOI : 10.1016/0250-6874(89)87100-8

E. Mounier and L. Robin, Status of the MEMS Industry report (MIS), 2011.

X. Lafontan, Application des micro-technologies aux composants de commutation électrique : études et performances de micro-relais MEMS, Thèse de doctorat, Université des sciences et techniques de Montpellier, 2001.

C. Goldsmith, J. Randall, S. Eshelman, T. Lin, D. Denniston et al., Characteristics of micromachined switches at microwave frequencies, 1996 IEEE MTT-S International Microwave Symposium Digest, pp.1141-1144, 1996.
DOI : 10.1109/MWSYM.1996.511231

C. L. Goldsmith, Z. Yao, S. Eshelman, and D. Denniston, Performance of low-loss RF MEMS capacitive switches, IEEE Microwave and Guided Wave Letters, vol.8, issue.8, pp.269-271, 1998.
DOI : 10.1109/75.704410

H. Xie, Lecture 16 RF MEMS (4) EEL6935 Advanced MEMS, 2005.

G. M. Rebeiz, RF MEMS Theory, design, and technology, pp.185-192, 2003.

J. Mckillop, T. Fowler, D. Goins, and R. Nelson, Design, Performance and Qualification of a Commercially Available MEMS Switch, 2006 European Microwave Conference, pp.1399-1401, 2006.
DOI : 10.1109/EUMC.2006.281298

J. J. Alen, Micro Electro Mechanical System Design, 2005.
DOI : 10.1201/9781420027754

W. D. Nix, Mechanical properties of thin films, Metallurgical Transactions A, vol.130, issue.11, pp.2217-2245, 1989.
DOI : 10.1007/BF02666659

A. Verger, A. Pothier, C. Guines, P. Blondy, O. Vendier et al., Nanogap MEMS micro-relay with 70 ns switching speed, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), pp.717-720, 2012.
DOI : 10.1109/MEMSYS.2012.6170192

J. Bouchaud and B. Knoblich, RF MEMS switches and varactor finally arrive, MEMS Investor Journal, 2010.

K. Petersen, Micromechanical Membrane Switches on Silicon, IBM Journal of Research and Development, vol.23, issue.4, pp.376-385, 1979.
DOI : 10.1147/rd.234.0376

L. Larson, R. Hacket, M. Melendes, and R. Lohr-june, Micromachined microwave actuator (MI- MAC) technology-A new tuning approach for microwave integrated circuits, IEEE Microwave Millimeter-Wave Monolithic circuits Symp, pp.27-30, 1991.

G. Rebeiz, K. Entesari, I. Reines, S. J. Park, M. El-tanani et al., Tuning in to RF MEMS, IEEE Microwave Magazine, vol.10, issue.6, pp.55-72, 2009.
DOI : 10.1109/MMM.2009.933592

M. Ruan, J. Shen, and C. Wheeler, Latching microelectromagnetic relays. Sensors and Actuators A: Physical, pp.346-350, 2001.
DOI : 10.1016/s0924-4247(01)00606-9

J. Ruan, Investigation and modelling of the impact of electrostatic discharges on capacitive RF MEMS switches, Thèse de doctorat, 2010.

M. Vincent, Étude des mécanismes de défaillance du contact électrique dans un microinterrupteur en technologie MEMS, Thèse de doctorat, 2010.

J. Qiu and S. Cunningham, RF MEMS Fabrication: MEMS in RF and Microwave Electronics course, 2007.

A. Fukuda, H. Okazaki, T. Hirota, and Y. Yamao, Novel 900 MHz/1.9 GHz dual-mode power amplifier employing MEMS switches for optimum matching, IEEE Microwave and Wireless Components Letters, vol.14, issue.3, pp.121-123, 2004.
DOI : 10.1109/LMWC.2003.821496

M. Kim, J. B. Hacker, R. E. Mihailovich, and J. F. Denatale, A monolithic MEMS switched dual-path power amplifier, IEEE Microwave and Wireless Components Letters, vol.11, issue.7, pp.285-286, 2001.
DOI : 10.1109/7260.933772

C. D. Patel and G. M. Rebeiz, RF MEMS Metal-Contact Switches With mN-Contact and Restoring Forces and Low Process Sensitivity, IEEE Transactions on Microwave Theory and Techniques, vol.59, issue.5, pp.1-8, 2011.
DOI : 10.1109/TMTT.2010.2097693

C. Goldsmith, J. Maciel, and J. Mckillop, Demonstrating Reliability, IEEE Microwave Magazine, vol.8, issue.6, pp.56-60, 2007.
DOI : 10.1109/MMM.2007.907197

B. Ghodsian, P. Bogdanoff, and D. Hyman, Wideband DC-contact MEMS series switch, Micro & Nano Letters, vol.3, issue.3
DOI : 10.1049/mnl:20080009

. Plana, Investigation of charging mechanisms in metal-insulator-metal structures, Journal of Microelectronics Reliability, vol.45, issue.911, pp.1782-1785, 2005.

Q. Ma, Q. Tran, T. K. Chou, J. Heck, H. Bar et al., Metal contact reliability of RF MEMS switches. SPIE proceedings series 6463 Electrical contacts: principles and applications Micro Electro Mechanical System Design Electrical conduction in solids II: theory of temperature-dependant conductors, CRC, vol.246, issue.107, pp.646305-646311, 1958.

W. Chang, I. Etison, and D. Bogy, An Elastic-Plastic Model for the Contact of Rough Surfaces, Journal of Tribology, vol.109, issue.2, pp.257-263, 1987.
DOI : 10.1115/1.3261348

W. J. Stronge, Impact Mechanics. United Kingdom, 2004.

W. R. Chang, An elastic-plastic contact model for a rough surface with an ion-plated soft metallic coating, Wear, vol.212, issue.2, pp.229-237, 1997.
DOI : 10.1016/S0043-1648(97)00148-8

J. C. Maxwell, A Treatise on Electricity and Magnetism, 1891.

A. G. Jansen, A. P. Van-gelder, and P. Wyder, Point-contact spectroscopy in metals, Journal of Physics C: Solid State Physics, vol.13, issue.33, pp.6073-6118, 1980.
DOI : 10.1088/0022-3719/13/33/009

Y. V. Sharvin, On the possible method for studying Fermi surfaces, Soviet Physics JETP, vol.21, pp.655-657, 1965.

G. Wexler, The size effect and the non-local Boltzmann transport equation in orifice and disk geometry, Proceedings of the Physical Society, pp.927-941, 1966.
DOI : 10.1088/0370-1328/89/4/316

S. Majumder, N. E. Mcgruer, and P. M. Zavracky, Electrostatically actuated micromechanical switches, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.15, issue.3, pp.1246-1249, 1997.
DOI : 10.1116/1.580602

B. Bhushan, Contact Mechanics of Rough Surfaces in Tribology: Single Asperity Contact, Applied Mechanics Reviews, vol.49, issue.5, pp.1-35, 1998.
DOI : 10.1115/1.3101928

C. Brown, O. Rezvanian, Z. M. , and J. Krim, Temperature dependence of asperity contact and contact resistance in gold RF MEMS switches, Journal of Micromechanics and Microengineering, vol.19, issue.2, pp.25006-25014, 2009.
DOI : 10.1088/0960-1317/19/2/025006

O. Rezvanian, M. A. Zikry, C. Brown, and J. Krim, Surface roughness, asperity contact and gold RF MEMS switch behavior, Journal of Micromechanics and Microengineering, vol.17, issue.10, pp.2006-2015, 2007.
DOI : 10.1088/0960-1317/17/10/012

C. Poulain, L. Boyer, P. Sainso, M. H. Maitournam, F. Houze et al., Experimental and theoretical study of creep effects in electrical contacts, Electrical Contacts, 1995. Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts, pp.147-153, 1995.
DOI : 10.1109/HOLM.1995.482866

H. Kwon, S. S. Jang, Y. H. Park, T. S. Kim, Y. D. Kim et al., Investigation of the electrical contact behaviours in Au-to-Au thin-film contacts for RF-MEMS switches, Journal of Micromechanics and Microengineering, issue.10, pp.18-105010, 2008.

S. Suresh, T. G. Nieh, and B. W. Choi, Nano-indentation of copper thin films on silicon substrates, Scripta Materialia, vol.41, issue.9, pp.951-958, 1999.
DOI : 10.1016/S1359-6462(99)00245-6

Q. G. Zhang, B. Y. Cao, and X. Zhang, Influence of grain boundary scattering on the electrical and thermal conductivities of polycrystalline gold nanofilms, Physical Review B, vol.74, issue.13, pp.134109-134114, 2006.
DOI : 10.1103/PhysRevB.74.134109

R. S. Timsit, Constriction resistance of thin-film contacts, IEEE 54th Holm conference on Electrical Contacts, pp.332-336, 2008.

J. D. Lavers and R. S. Timsit, Constriction resistance at high signal frequencies, IEEE Transactions on Components and Packaging Technologies, vol.25, issue.3, pp.446-452, 2002.
DOI : 10.1109/TCAPT.2002.804610

G. G. Adams and M. Nosonovshy, Contact modeling ??? forces, Tribology International, vol.33, issue.5-6, pp.431-442, 2000.
DOI : 10.1016/S0301-679X(00)00063-3

Y. Ando and J. Ino, Friction and pull-off forces on submicron-size asperities, Wear, vol.216, issue.2, pp.115-122, 1998.
DOI : 10.1016/S0043-1648(97)00158-0

K. W. Gilbert, S. Mall, K. D. Leedy, and B. Crawford, A Nanoindenter Based Method for Studying MEMS Contact Switch Microcontacts, 2008 Proceedings of the 54th IEEE Holm Conference on Electrical Contacts, pp.137-144, 2008.
DOI : 10.1109/HOLM.2008.ECP.35

D. J. Dickrell and M. T. Dugger, The effects of surface contamination on resistance degradation of hot-switched low-force MEMS electrical contacts, Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 2005., pp.255-258, 2005.
DOI : 10.1109/HOLM.2005.1518252

J. W. Tringe, T. A. Uhlman, A. C. Oliver, and J. E. Houston, A single asperity study of Au/Au electrical contacts, Journal of Applied Physics, vol.93, issue.8, pp.4661-4669, 2003.
DOI : 10.1063/1.1561998

G. Gregori, R. E. Mihailovich, J. F. Denatale, and D. R. Clarke, Development of adhesive contact of MEMS-switches upon actuation cycling, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005., pp.439-442, 2005.
DOI : 10.1109/MEMSYS.2005.1453961

F. Souchon, A. Peschot, P. L. Charvet, and C. Poulain, Impact of Creep and Softening Mechanisms on the Contact Resistance of RF MEMS Ohmic Switches: Study of the Current and Time Effects on Au-to-Au Microcontacts in Static Contact Conditions, 2010 Proceedings of the 56th IEEE Holm Conference on Electrical Contacts, pp.1-7, 2010.
DOI : 10.1109/HOLM.2010.5619516

P. G. Slade, Electrical contacts: principles and applications, CRC, 1999.
DOI : 10.1201/b15640

F. Kahlrausch, Über den Stationaren Temperäturzustand eines elektrisch Geheizten Leiters

J. A. Greenwood and J. B. Williamson, Electrical Conduction in Solids. II. Theory of Temperature-Dependent Conductors, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.246, issue.1244, pp.13-31, 1958.
DOI : 10.1098/rspa.1958.0103

R. Holm, Electric contacts: Theory and applications, 1969.
DOI : 10.1007/978-3-662-06688-1

B. D. Jensen, L. L. Chow, K. W. Huang, K. Saitou, J. L. Volakis et al., Effect of nanoscale heating on electrical transport in RF MEMS switch contacts, Journal of Microelectromechanical Systems, vol.14, issue.5, pp.935-946, 2005.
DOI : 10.1109/JMEMS.2005.856653

R. Timsit, On the Evalutation of Contact Temperature from Potential-Drop Measurements, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.6, issue.1, pp.115-121, 1983.
DOI : 10.1109/TCHMT.1983.1136148

Y. Sano and T. Kaneko, Applicability and correction of temperature-voltage relation in the case of point contact, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.21, issue.2, pp.345-351, 1998.
DOI : 10.1109/95.705483

D. Hyman and M. Mehregany, Contact physics of gold microcontacts for MEMS switches, IEEE transactions on components and packaging technologies, pp.357-364, 1999.

S. T. Patton and J. S. Zabinski, Fundamental studies of Au contacts in MEMS RF switches, Tribology Letters, vol.97, issue.2, pp.215-230, 2005.
DOI : 10.1007/s11249-004-1778-3

I. Dietrich and E. Rüchardt, Feinwanderung an Abhekontakten, Zeitschrift für Angewandte Physics, vol.1, pp.1-24, 1948.

S. J. Krumbein, Metallic electromigration phenomena, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.11, issue.1, pp.5-15, 1988.
DOI : 10.1109/33.2957

J. Lienig, introduction to electromigration-aware physical design, Proceedings of the 2006 international symposium on Physical design , ISPD '06, pp.39-46, 2006.
DOI : 10.1145/1123008.1123017

Z. Yang, Contact material optimization and contact physics in metal-contact microelectromechanical systems (MEMS) switches, Thèse de doctorat, 2008.

E. W. Muller, J. A. Panitz, and S. B. Mclane, The Atom???Probe Field Ion Microscope, Review of Scientific Instruments, vol.39, issue.1, pp.83-86, 1968.
DOI : 10.1063/1.1683116

T. T. Tsong, Effects of an electric field in atomic manipulations, Physical Review B, vol.44, issue.24, pp.13703-13710, 1991.
DOI : 10.1103/PhysRevB.44.13703

D. N. Zurlev and R. G. Forbes, Field ion emission: the effect of electrostatic field energy on the prediction of evaporation field and charge state. ournal of Physics D: Applied Physics, pp.78-82, 2003.

T. T. Tsong, Field ion image formation, Surface Science, vol.70, issue.1, pp.211-233, 1978.
DOI : 10.1016/0039-6028(78)90410-7

H. J. Manin, P. Guethner, and D. Rugar, Atomic emission from a gold scanning-tunneling-microscope tip, Physical Review Letters, vol.65, issue.19, pp.2418-2421, 1990.
DOI : 10.1103/PhysRevLett.65.2418

C. S. Chang, W. B. Su, and T. Tsong, Field evaporation between a gold tip and a gold surface in the scanning tunneling microscope configuration, Physical Review Letters, vol.72, issue.4, pp.574-577, 1994.
DOI : 10.1103/PhysRevLett.72.574

J. J. Kruglick and K. S. Pister, Lateral MEMS microcontact considerations, Journal of Microelectromechanical Systems, vol.8, issue.3, pp.264-271, 1999.
DOI : 10.1109/84.788630

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1032.4089

L. Féchant, Le contact électrique -Phénomènes physiques et matériaux, Hermes, 1996.

P. G. Slade and E. Taylor, Electrical breakdown in atmospheric air between closely spaced (0.2 ??m-40 ??m) electrical contacts, IEEE Transactions on Components and Packaging Technologies, vol.25, issue.3, pp.390-396, 2002.
DOI : 10.1109/TCAPT.2002.804615

J. M. Torres and R. S. , Electric field breakdown at micrometre separations, Nanotechnology, vol.10, issue.1, pp.102-107, 1999.
DOI : 10.1088/0957-4484/10/1/020

A. J. Wallash and L. Levit, Electrical breakdown and ESD phenomena for devices with nanometer-to-micron gaps. Reliability, testing and characterization of MEMS, MOEMS II, vol.4980, issue.1, pp.87-96, 2003.

F. W. Strong, J. L. Skinner, and N. C. Tien, Electrical discharge across micrometer-scale gaps for planar MEMS structures in air at atmospheric pressure, Journal of Micromechanics and Microengineering, vol.18, issue.7, pp.75025-75035, 2008.
DOI : 10.1088/0960-1317/18/7/075025

Z. Chen and G. Witter, Electrical erosion comparison of materials for automotive loads, 19th International conference on Electrical Contacts, pp.7-15, 1998.

Z. K. Chen and K. Sawa, Effect of arc behaviour on material transfer: a review, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.21, issue.2, pp.310-322, 1998.
DOI : 10.1109/95.705480

A. Tazzoli, V. Peretti, R. Gaddi, A. Gnudi, E. Zanoni et al., Reliability Issues in RF-MEMS Switches Submitted to Cycling and ESD Test, 2006 IEEE International Reliability Physics Symposium Proceedings, pp.410-415, 2006.
DOI : 10.1109/RELPHY.2006.251253

. Irwin, Electrostatic discharge/electrical overstress susceptibility in MEMS: a new failure mode. SPIE proceedings series 4180, pp.30-39, 2000.

J. W. Mcbride, R. A. Coutu, and L. V. Starman, Improved Micro-Contact Resistance Model that considers Material Deformation Electron Transport and Thin Film Characteristics, 55th IEEE Holm Conference on Electrical Contacts, pp.298-302, 2004.

S. Majumder, N. E. Mcgruer, and P. M. Zavracky, Electrostatically actuated micromechanical switches, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.15, issue.3, pp.1246-1249, 1997.
DOI : 10.1116/1.580602

J. Oberhammer and G. Stemme, Active Opening Force and Passive Contact Force Electrostatic Switches for Soft Metal Contact Materials, Journal of Microelectromechanical Systems, vol.15, issue.5, pp.1235-1242, 2006.
DOI : 10.1109/JMEMS.2006.882810

R. A. Coutu, P. E. Kladitis, R. L. Crane, and K. D. Leedy, Radio frequency MEMS switch contact metal selection, United States Patent No: US 7, pp.750-751, 2007.

R. A. Coutu, J. R. Reid, R. Cortez, R. E. Strawser, and P. E. Kladitis, Microswitches with sputtered Au, AuPd,Au-on-AuPt, and AuPtCu alloy electric contacts, IEEE Transactions on Components and Packaging Technologies, vol.29, issue.2, pp.341-349, 2006.
DOI : 10.1109/TCAPT.2006.875898

J. Schimkat, Contact Materials For Microrelays. IEEE The Eleventh Annual International Workshop on Micro Electro Mechanical Systems, pp.190-194, 1998.

J. Schimkat, Contact measurements providing basic design data for microrelay actuators. Sensors and Actuators A: Physical, pp.138-143, 1999.

S. C. Bromley and B. J. Nelson, Performance of microcontacts tested with a novel MEMS device, Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192), pp.122-127, 2001.
DOI : 10.1109/HOLM.2001.953199

J. Beale and R. F. Pease, Limits of high-density, low-force pressure contacts, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.17, issue.2, pp.257-262, 1994.
DOI : 10.1109/95.296407

J. Beale and R. F. Pease, Apparatus for studying ultrasmall contacts, Electrical Contacts, 1992 Proceedings of the Thirty-Eighth IEEE Holm Conference on Electrical Contacts, pp.45-49, 1992.
DOI : 10.1109/HOLM.1992.246935

. Kingon, A new test facitily for efficient evaluation of MEMS contact materials, Journal of Micromechanics and Microengineering, vol.17, issue.9, pp.1788-1795, 2007.

H. Lee, R. A. Coutu, S. Mall, and P. E. Kladitis, Nanoindentation technique for characterizing cantilever beam style RF microelectromechanical systems (MEMS) switches, Journal of Micromechanics and Microengineering, vol.15, issue.6, p.6
DOI : 10.1088/0960-1317/15/6/013

D. J. Dickrell and M. T. Dugger, The effects of surface contamination on resistance degradation of hot-switched low-force MEMS electrical contacts, Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 2005., pp.255-258, 2005.
DOI : 10.1109/HOLM.2005.1518252

J. Schimkat, Contact Materials For Microrelays. IEEE The Eleventh Annual International Workshop on Micro Electro Mechanical Systems, pp.190-194, 1998.

P. Duvivier, V. Mandrillon, J. Polizzi, and K. Inal, Etude de la résistance électrique d'un contact Au/Au en function de la force appliquée. 19 ème Congrès Français de Mécanique, pp.1-6, 2009.

. Kingon, A new test facitily for efficient evaluation of MEMS contact materials, Journal of Micromechanics and Microengineering, vol.17, issue.9, pp.1788-1795, 2007.

H. Kwon, S. S. Jang, Y. H. Park, T. S. Kim, Y. D. Kim et al., Investigation of the electrical contact behaviours in Au-to-Au thin-film contacts for RF-MEMS switches, Journal of Micromechanics and Microengineering, issue.10, pp.18-105010, 2008.

B. H. Jang, P. H. Tseng, and W. Fang, Characterization of micro-contact properties using a novel micromachined apparatus, Journal of Micromechanics and Microengineering, vol.18, issue.5, pp.55020-55026, 2008.
DOI : 10.1088/0960-1317/18/5/055020

J. W. Mcbride, R. A. Coutu, and L. V. Starman, Improved Micro-Contact Resistance Model that considers Material Deformation Electron Transport and Thin Film Characteristics, 55th IEEE Holm Conference on Electrical Contacts, pp.298-302, 2009.

J. W. Mcbride, The loaded surface profile : A new technique for the investigation of contact surfaces, IEEE 23rd International Conference on Electrical Contacts, pp.150-156, 2006.

S. C. Bromley and B. J. Nelson, Performance of microcontacts tested with a novel MEMS device, Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192), pp.122-127, 2001.
DOI : 10.1109/HOLM.2001.953199

J. Schimkat, Contact measurements providing basic design data for microrelay actuators. Sensors and Actuators A: Physical, pp.138-143, 1999.

J. Beale and R. F. Pease, Apparatus for studying ultrasmall contacts, Electrical Contacts, 1992 Proceedings of the Thirty-Eighth IEEE Holm Conference on Electrical Contacts, pp.45-49, 1992.
DOI : 10.1109/HOLM.1992.246935

C. Seguineau, A. Broue, J. Dhennin, J. M. Desmarres, A. Pothier et al., Mechanical Cycling for electrical performances of materials used in MEMS: Application to gold micro-switches, Metals Materials And Processes, vol.1, pp.1-24, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00349190

Q. Ma, Q. Tran, T. K. Chou, J. Heck, H. Bar et al., Metal contact reliability of RF MEMS switches. SPIE proceedings series 6463, pp.646305-646311, 2007.

B. D. Jensen, L. L. Chow, K. W. Huang, K. Saitou, J. L. Volakis et al., Effect of nanoscale heating on electrical transport in RF MEMS switch contacts, Journal of Microelectromechanical Systems, vol.14, issue.5, pp.935-946, 2005.
DOI : 10.1109/JMEMS.2005.856653

D. J. Dickrell and M. T. Dugger, Electrical Contact Resistance Degradation of a Hot-Switched Simulated Metal MEMS Contact, IEEE Transactions on Components and Packaging Technologies, vol.30, issue.1, pp.75-80, 2007.
DOI : 10.1109/TCAPT.2007.892074

B. D. Jensen, K. Huang, L. Chow, K. Saitou, J. L. Volakis et al., Asperity heating for repair of metal contact RF MEMS switches, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535), pp.1939-1942, 2004.
DOI : 10.1109/MWSYM.2004.1338989

Z. Yang, Contact material optimization and contact physics in metal-contact microelectromechanical systems (MEMS) switches, Thèse de doctorat, 2008.

G. Rebeiz, K. Entesari, I. Reines, S. J. Park, M. El-tanani et al., Tuning in to RF MEMS, IEEE Microwave Magazine, vol.10, issue.6, pp.55-72, 2009.
DOI : 10.1109/MMM.2009.933592

R. Holm, Electric contacts: Theory and applications, 1969.
DOI : 10.1007/978-3-662-06688-1

S. T. Patton and J. S. Zabinski, Fundamental studies of Au contacts in MEMS RF switches, Tribology Letters, vol.97, issue.2, pp.215-230, 2005.
DOI : 10.1007/s11249-004-1778-3

T. Umemoto, T. Takeuchi, and R. Tanaka, The Behavior of Surface Oxide Film on Ruthenium and Rhodium Plated Contacts, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.1, issue.1, pp.103-107, 1978.
DOI : 10.1109/TCHMT.1978.1135236

P. G. Slade, Electrical contacts: principles and applications, CRC, 1999.
DOI : 10.1201/b15640

F. Ke, J. Miao, and J. Oberhammer, A ruthenium-based multi-metal contact RF MEMS switch with a corrugated diaphragm, IEEE/ASME Journal of Electromechanical Systems, vol.17, issue.6, pp.1447-1459, 2008.

C. Seguineau, Caractérisation micromécanique de matériaux en couche mince destinés aux micro-et nano-technologies, Thèse de doctorat, 2009.

L. Féchant, Le contact électrique -Phénomènes physiques et matériaux, Hermes, 1996.

S. T. Patton and J. S. Zabinski, Fundamental studies of Au contacts in MEMS RF switches, Tribology Letters, vol.97, issue.2, pp.215-230, 2005.
DOI : 10.1007/s11249-004-1778-3

R. Holm, Electric contacts: Theory and applications, 1969.
DOI : 10.1007/978-3-662-06688-1

R. S. Timsit, Electrical Conduction Through Small Contact Spots, IEEE Transactions on Components and Packaging Technologies, vol.29, issue.4, pp.727-734, 2003.
DOI : 10.1109/TCAPT.2006.885930

L. Weber, M. Lehr, and E. Gmelin, Investigation of the transport properties of gold point contacts, Physica B: Condensed Matter, vol.217, issue.3-4, pp.181-192, 1996.
DOI : 10.1016/0921-4526(95)00630-3

B. D. Jensen, L. L. Chow, K. W. Huang, K. Saitou, J. L. Volakis et al., Effect of nanoscale heating on electrical transport in RF MEMS switch contacts, Journal of Microelectromechanical Systems, vol.14, issue.5, pp.935-946, 2005.
DOI : 10.1109/JMEMS.2005.856653

P. Buffat and J. P. Borel, Size effect on the melting temperature of gold particles, Physical Review A, vol.13, issue.6, pp.2287-2298, 1976.
DOI : 10.1103/PhysRevA.13.2287

P. G. Slade, Electrical contacts: principles and applications, CRC, 1999.
DOI : 10.1201/b15640

A. Doduco, Data Book of Electrical Contacts, 2010.

G. Gregori and D. R. Clarke, The interrelation between adhesion, contact creep, and roughness on the life of gold contacts in radio-frequency microswitches, Journal of Applied Physics, vol.100, issue.9, pp.94904-94904, 2006.
DOI : 10.1063/1.2363745

M. C. Fromen, Étude expérimentale et modélisation de la structure de nanoparticules magnétiques : des particules isolées aux assemblages, Thèse de doctorat, 2003.

L. Féchant, Le contact électrique -Phénomènes physiques et matériaux 232 CONCLUSION GENERALE Conclusion générale LISTE DES PUBLICATIONS Journaux avec comité de relecture, Hermes, 1996.

J. Broue, F. Dhennin, C. Courtade, P. Dieppedale, X. Pons et al., Characterization of gold/gold, gold/ruthenium, and ruthenium/ruthenium ohmic contacts in MEMS switches improved by a novel methodology, MEMS, and MOEMS (JM3), pp.7592-75920, 2010.

T. Broue, J. Fourcade, F. Dhennin, P. Courtade, P. Charvet et al., Validation of bending tests by nanoindentation for micro-contact analysis of MEMS switches, Journal of Micromechanics and Microengineering, vol.20, issue.8
DOI : 10.1088/0960-1317/20/8/085025

O. Courtade and . Vendier, Sub-hundred nanosecond electrostatic actuated RF MEMS switched capacitors, Journal of Micromechanics and Microengineering (JMM), vol.6, issue.20, pp.4011-4020, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00567666

A. Seguineau, J. Broue, J. Dhennin, A. Desmarres, X. Pothier et al., Contact resistance determination with nanoindentation tools
URL : https://hal.archives-ouvertes.fr/hal-00199549

A. Seguineau, J. Broue, J. Dhennin, A. Desmarres, X. Pothier et al., Mechanical Cycling for electrical performances of materials used in MEMS: Application to gold micro-switches
URL : https://hal.archives-ouvertes.fr/hal-00349190

H. Liu, D. Leray, P. Pons, S. Colin, and A. Broué, Conférences internationales avec comité de relecture Finite Element Based Surface Roughness Study for Ohmic Contact of Microswitches, Metals Materials And Processes Proceedings of the 58th IEEE Holm Conference on Electrical contacts, pp.1-24, 2008.

J. Broue, P. Dhennin, P. Charvet, N. B. Pons, P. Jemaa et al., Multiphysical characterization of micro-contact materials for MEMS switches, Proceedings of the 56th IEEE Holm Conference on Electrical contacts, pp.363-372, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00670153

J. Broue, F. Dhennin, P. Courtade, P. Charvet, R. Pons et al., An experimental characterization of Au-and Ru-based microcontacts for MEMS switches, Proceeding of Design Test Integration and Packaging of MEMS/MOEMS (DTIP), pp.397-402, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00670159

J. Broue, F. Dhennin, C. Courtade, P. Diepedale, X. Pons et al., Ru ohmic contacts in MEMS switches improved by a novel methodology, Proceedings of SPIE MEMS MOEMS, pp.9-17, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00624780

J. Lellouchi, X. Dhennin, D. Lafontan, A. Veyrie, J. Broue et al., A new method for hermeticity testing of wafer-level packaging, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS and Nanodevices IX, pp.125-134, 2010.
DOI : 10.1117/12.839860

. Plana, Methodology to Analyze Failure Mechanisms of Ohmic Contacts on MEMS Switches, IEEE 47th Annual International Reliability Physics Symposium, pp.869-873, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00670200

T. Broue, J. Fourcade, F. Dhennin, C. Courtade, P. Dieppedale et al., Validation of Bending Test by Nanoindentation for Micro-Contact Analysis of RF-MEMS Switches
URL : https://hal.archives-ouvertes.fr/hal-00670198

A. Seguineau, J. Broue, J. Dhennin, A. Desmarres, X. Pothier et al., MEMS Characterization ? A new experimental approach for measuring electrical contact resistance by using nanoindentation, Proceeding of 18th Workshop on MicroMechanics Europe, pp.281-284, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199601

D. Pennec, P. Peyrou, J. Pons, A. Dhennin, C. Broué et al., Modeling of RF MEMS contact for investigation of the degradation mechanism, pp.186-195, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00395370

. Ignat, New Experimental Approach for Measuring Electrical Contact Resistance with an Accurate Mechanical Actuation, Evaluation of the Performances of Gold Micro-switches. MRS proceeding, Nouvelle méthode de caractérisation des contacts ohmiques dans les interrupteurs MEMS Conférence annuel école doctorale GEET, pp.625-634, 1052.
URL : https://hal.archives-ouvertes.fr/hal-00358120

. La-plateforme-de, endurance ainsi que les performances des composants RMI 2004 et TT712 Ces deux dispositifs MEMS ont effectué 1 millions de cycles sous diverses sollicitations sans défaillances. L'évolution de la résistance de contact en fonction de la force appliquée a également été mesurée pour ces deux microinterrupteurs . Cependant, nous avons observé que la désencapsulation des composants entraine un biais dans la mesure de résistance de contact. Le banc de test de micro-flexion nous a également permis de comprendre la dynamique d

J. Maciel, RF MEMS switches are reliable : a comprehensive technology overview, MEMS Investor Journal, 2010.

G. M. Rebeiz and J. B. Muldavin, RF MEMS switches and switch circuits, IEEE Microwave Magazine, vol.2, issue.4, pp.59-71, 2001.
DOI : 10.1109/6668.969936

C. Goldsmith, J. Maciel, and J. Mckillop, Demonstrating Reliability, IEEE Microwave Magazine, vol.8, issue.6, pp.56-60, 2007.
DOI : 10.1109/MMM.2007.907197