J. Baruchel, J. Buffière, E. Maire, and P. Merle, X-ray tomography in material science, 2000.

P. Cloetens, W. Ludwig, and E. Boller, Quantitative phase contrast tomography using coherent synchrotron radiation, Developments in X-Ray Tomography III, pp.4503-82, 2002.
DOI : 10.1117/12.452867

P. Cloetens, M. Pateyron-salomé, and J. Buffière, Observation of microstructure and damage in materials by phase sensitive radiography and tomography, Journal of Applied Physics, vol.81, issue.9, pp.81-5878, 1997.
DOI : 10.1063/1.364374

E. Maire, J. Y. Buffière, and L. Salvo, Application of X-ray microtomography in, Materials Science, AEM, vol.3, pp.8-539, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00475297

E. Maire, L. Salvo, P. Cloetens, and M. , Tomographie à rayons X appliquée à l'étude des matériaux, Techniques de l'ingénieur, pp.20-21, 2004.

J. Baruchel, J. Y. Buffiere, and P. Cloetens, Advances in synchrotron radiation microtomography, Scripta Materialia, vol.55, issue.1, pp.41-46, 2006.
DOI : 10.1016/j.scriptamat.2006.02.012

URL : https://hal.archives-ouvertes.fr/hal-00436214

. Cloetens, La tomographie X : Principe, méthodes, possibilités

P. Cloetens, W. Ludwing, and J. Baruchel, Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays, Applied Physics Letters, vol.75, issue.19
DOI : 10.1063/1.125225

M. Heethoff and P. Cloetens, A comparison of synchrotron X-ray phase contrast tomography and holotomography for non-invasive investigations of the internal anatomy of mites,Soil Organisms, pp.205-215, 2008.

M. Maire and . Suéry, In situ ultra-fast continuous X-rays micro-tomography : application to crack propagation and to solidification

L. Salvo, P. Lhuissier, and M. Scheel, In situ continuous X-rays micro-tomography : application to high temperature deformation of magnesium alloys and to solidification of aluminium alloys, Nantes), p.8, 2010.

E. Pereiro, Grain boundary penetration in the AI/Ga system : a synchrotron radiation Xray imaging investigation, p.197, 2004.

D. Bellet, B. Gorges, and A. Dallery, A 1300 K furnace for in situ X-ray microtomography, J. Appl. Cryst, vol.4336, pp.366-367, 2003.

J. Buffière, E. Maire, and P. Cloetens, Characterisation of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography, Acta Met, vol.5, pp.47-1613, 1999.

J. A. Elliott, A. H. Windle, and J. R. Hobdell, In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography, Journal of Materials Science, vol.37, issue.8, pp.1547-1555, 2002.
DOI : 10.1023/A:1014920902712

R. Müller, S. C. Gerber, and W. C. Hayes, Micro-compression: a novel technique for the nondestructive assessment of local bone failure, Technolgy and Health Care, pp.433-444, 1998.

J. Buffière, S. Savelli, and P. H. Jouneau, Experimental study of porosity and its relation to fatigue mechanisms of model Al???Si7???Mg0.3 cast Al alloys, Materials Science and Engineering: A, vol.316, issue.1-2, pp.316115-126, 2001.
DOI : 10.1016/S0921-5093(01)01225-4

G. Viggiani, N. Lenoir, and P. Bésuelle, X-ray micro tomography for studying localized deformation in fine-grained geomaterials under triaxial compression, C. R. Mecanique, pp.332819-826, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00541473

P. Lhuissier, L. Salvo, and Y. Brechet, Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading, Scripta Materialia, vol.63, issue.3, pp.277-280, 2010.
DOI : 10.1016/j.scriptamat.2010.04.010

URL : https://hal.archives-ouvertes.fr/hal-00517217

G. P. and J. Amans, Three-dimensional image reconstruction in radiology and nuclear medicine, p.315, 1996.

A. J. Journée-de-synthèse-imagerie-bio-médicale-grenoble-) and C. R. Garderet-p, Imagerie médicale : méthodes de reconstruction et techniques instrumentales, 1985.

T. Weitkamp, In-line phase contrast in synchrotron-radiation microradiography and tomography, Developments in X-Ray Tomography III, pp.4503-92, 2002.
DOI : 10.1117/12.452832

A. Faridani, K. A. Buglione, and P. Huabsomboon, Introduction to local tomography, Contemporary Mathematics, pp.29-47, 2001.
DOI : 10.1090/conm/278/04592

R. M. Lewitt and R. H. Bates, Image reconstruction from projections, II Modified back-projection methods, Optik Stuttgart, pp.5085-109, 1978.

S. L. Gea, W. F. Decraemer, and J. J. Dirckx, Region of interest micro-CT of the middle ear: a practical approach J. X-Ray Sci, Technol, pp.13137-147, 2005.

. Prost, Tomographie 2D locale en géométrie divergente par une approche ondelettes non séparables

A. H. Delaney and Y. Bresler, Multiresolution tomographic reconstruction using wavelets, IEEE Transactions on Image Processing, vol.4, issue.6, pp.799-813, 1995.
DOI : 10.1109/83.388081

F. Rashid-farroki, K. J. Liu, C. A. Berenstein, and D. Walnut, Wavelet-based multiresolution local tomography, IEEE Transactions on Image Processing, issue.6, pp.1412-1430, 1997.

O. Nalcioglu, Z. H. Cho, and R. Y. Lou, Limited Field of View Reconstruction in Computerized Tomography, IEEE Transactions on Nuclear Science, vol.26, issue.1, pp.26546-551, 1979.
DOI : 10.1109/TNS.1979.4329688

A. R. Kalukin, D. T. Keane, and W. G. Roberge, Region-of-interest microtomography for component inspection, IEEE Transactions on Nuclear Science, vol.46, issue.1, pp.4631-4677, 1999.
DOI : 10.1109/23.747765

. Grangeat, Region-of-interest cone-beam computed tomography, pp.381-385

X. Xiao, F. De-carlo, and S. Stock, Practical error estimation in zoom-in and truncated tomography reconstructions, Review of Scientific Instruments, vol.78, issue.6, pp.78-063705, 2007.
DOI : 10.1063/1.2744224

A. Kyrieleis, V. Titarenko, and M. Ibison, Region-of-interest tomography using filtered backprojection: assessing the practical limits, Journal of Microscopy, vol.2007, issue.1, pp.241-69, 2011.
DOI : 10.1111/j.1365-2818.2010.03408.x

V. Kaftandjian, G. Peix, D. Babot, and F. Peyrin, High-Resolution X-Ray Computed Tomography Using a Solid-State Linear Detector, Journal of X-Ray Science and Technology, vol.6, issue.1, pp.94-106, 1996.
DOI : 10.1006/jxra.1996.0007

T. Olson, Optimal time-frequency projections for localized tomography, Annals of Biomedical Engineering, vol.August, issue.3, 1996.
DOI : 10.1007/BF02584461

T. Olson and J. Destefano, Wavelet localization of the Radon transform, IEEE Transactions on Signal Processing, vol.42, issue.8, pp.2055-2067, 1994.
DOI : 10.1109/78.301841

S. Youssef, E. Maire, and R. Gaertner, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.53719-730, 2005.
DOI : 10.1016/j.actamat.2004.10.024

URL : https://hal.archives-ouvertes.fr/hal-00436799

P. C. Carman, Flow of Gases through Porous Media, pp.11-13, 1956.

O. Andersen, U. Waag, L. Schneider, G. Stephani, and B. Kieback, Novel metallic hollow sphere structures: processing and properties, Proceedings of Int. Confon Metal Foams and Porous Metal structures, pp.14-16, 1999.

M. F. Ashby, A. G. Evans, and N. A. Fleck, Metal foam : a design guide, 2000.
DOI : 10.1016/s0261-3069(01)00049-8

M. S. Aly, Effect of pore size on the tensile behavior of open-cell Ti foams: Experimental results, Materials Letters, vol.64, issue.8, pp.935-937, 2001.
DOI : 10.1016/j.matlet.2010.01.064

M. S. Aly, Tensile properties of open-cell nickel foams, Materials & Design, vol.31, issue.4, pp.31-35, 2001.
DOI : 10.1016/j.matdes.2009.10.018

E. Andrews and L. Gibson, The influence of crack-like defects on the tensile strength of an open-cell aluminum foam, Scripta Materialia, vol.44, issue.7, pp.1005-1010, 2001.
DOI : 10.1016/S1359-6462(01)00673-X

E. Andrews, W. Sanders, and L. Gibson, Compressive and tensile behaviour of aluminum foams, Materials Science and Engineering: A, vol.270, issue.2, pp.113-124, 1999.
DOI : 10.1016/S0921-5093(99)00170-7

H. P. Degischer and B. Kriszt, Handbook of cellular metals: production, processing, applications, p.373, 2002.
DOI : 10.1002/3527600558

T. Dillard, F. N-'guyen, and E. Maire, 3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography, Philosophical Magazine, vol.11, issue.19, pp.85-104, 2005.
DOI : 10.1103/PhysRevE.53.6181

URL : https://hal.archives-ouvertes.fr/hal-00154842

L. J. Gibson and M. Ashby, F Cellular Solids : structure and properties, 1997.
DOI : 10.1017/CBO9781139878326

R. Goodall, Y. Conde, and R. Muller, Uniaxial Deformation of Microcellular Metals: Model Systems and Simplified Analysis, IUTAM Symposium on Mechanical Properties of Cellular Materials, pp.12-13, 2009.
DOI : 10.1007/978-1-4020-9404-0_1

P. Lhuissier, A. Fallet, L. Salvo, and Y. Brechet, Quasistatic mechanical behaviour of stainless steel hollow sphere foam: Macroscopic properties and damage mechanisms followed by X-ray tomography, Materials Letters, vol.63, issue.13-14, pp.13-141113, 2009.
DOI : 10.1016/j.matlet.2008.10.051

URL : https://hal.archives-ouvertes.fr/hal-00436510

P. Lhuissier, L. Salvo, and Y. Brechet, Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading, Scripta Materialia, vol.63, issue.3, pp.277-280, 2010.
DOI : 10.1016/j.scriptamat.2010.04.010

URL : https://hal.archives-ouvertes.fr/hal-00517217

C. S. Marchi, J. Despois, and A. Mortensen, Uniaxial deformation of open-cell aluminum foam: the role of internal damage, Acta Materialia, vol.52, issue.10, pp.102895-2902, 2004.
DOI : 10.1016/j.actamat.2004.02.035

A. Marmottant, Structure et proprieties de mousses d'aluminium élaborées par replication de préformes de sel, 2006.

A. Öchsner and C. Augustin, Multifunctional Metallic Hollow Sphere Structures Manufacturing, Properties and Application, 2009.

T. Ohgaki, H. Toda, and . Kobayashi, In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays, Philosophical Magazine, vol.86, pp.28-4417, 2006.

O. Olurin, N. Fleck, and M. Ashby, Deformation and fracture of aluminium foams, Materials Science and Engineering: A, vol.291, issue.1-2, pp.1-2136, 2000.
DOI : 10.1016/S0921-5093(00)00954-0

N. Tuncer, G. Arslan, E. Maire, and L. Salvo, Influence of cell aspect ratio on architecture and compressive strength of titanium foams, Materials Science and Engineering: A, vol.528, issue.24, pp.247368-7374, 2011.
DOI : 10.1016/j.msea.2011.06.028

URL : https://hal.archives-ouvertes.fr/hal-00632698

C. E. Wen, Y. Yamada, and K. Shimojima, Processing and mechanical properties of autogenous titanium implant materials, J. Mater.Sci, pp.13-397, 2002.

M. Takemoto, S. Fujibayashi, and M. Neo, Mechanical properties and osteoconductivity of porous bioactive titanium, Bioma-terials, pp.6014-6023, 2005.

T. Imwinkelried, Mechanical properties of open-pore titanium foam, Journal of Biomedical Materials Research Part A, vol.53, issue.4
DOI : 10.1002/jbm.a.31118

Z. Esen and S. Bor, Processing of titanium foams using magnesium spacer particles, Scripta Materialia, vol.56, issue.5, pp.341-344, 2007.
DOI : 10.1016/j.scriptamat.2006.11.010

L. P. Lefebvre and E. Baril, Effect of Oxygen Concentration and Distribution on the Compression Properties on Titanium Foams, Advanced Engineering Materials, vol.23, issue.9, pp.868-876, 2008.
DOI : 10.1002/adem.200800122

W. Niu, C. Bai, and G. Qiu, Processing and properties of porous titanium using space holder technique, Materials Science and Engineering: A, vol.506, issue.1-2, pp.148-151, 2009.
DOI : 10.1016/j.msea.2008.11.022

N. Tuncer, G. Arslan, E. Maire, and L. Salvo, Investigation of spacer size effect on architecture and mechanical properties of porous titanium, Materials Science and Engineering: A, vol.530, pp.530633-642, 2011.
DOI : 10.1016/j.msea.2011.10.036

URL : https://hal.archives-ouvertes.fr/hal-00664738

P. Babin, G. Della, H. Valle, and . Chiron, Fast X-ray tomography analysis of bubble growth and foam setting during breadmaking, Journal of Cereal Science, vol.43, issue.3, pp.393-397, 2006.
DOI : 10.1016/j.jcs.2005.12.002

URL : https://hal.archives-ouvertes.fr/hal-00141792

S. Blacher, A. Léonard, and B. Heinrichs, Image analysis of X-ray microtomogrames of Pd-Ag/SiO2 xerogel catalysts supported in Al 2 O 3 foams, Colloids and Surface A, pp.241-201, 2004.

S. Youssef, E. Maire, and R. Gaertner, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005.
DOI : 10.1016/j.actamat.2004.10.024

URL : https://hal.archives-ouvertes.fr/hal-00436799