]. A. Bibliographie1, J. F. Aït-hammouda, P. L. Brudny, S. Alger, F. Brisset et al., Réduction du bruit audible d'origine magnétique dans les machines asynchrones alimentées par MLI -règles de conception silencieuse et optimisation multi-objectif - Modélisation de la denture des machines asynchrones Phénomène de résonance The nature of polyphase induction machines Contribution à l'instrumentation de la démarche de conception des machines électriques Méthodologies de conception optimale des composants électomagnétiques Multi-plex models for the optimum design of electrical machines Space mapping technique for électomagnetic optimization, Thèse de Doctorat Thèse de Doctorat Démarches et outils pour la conception optimale des machines électriques Habilitation à Diriger des Recherches Habilitation à Diriger des Recherches Microwave Theory and Techniques, pp.1009-1023, 1951.

V. Mester, Conception optimale systemique des composants des chaines de traction électrique, Thèse de Doctorat, 2007.

V. Mester, F. Gillon, P. Brochet, and A. F. Wurtz, Dimensionnement multi-modèle pour la conception optimale des machines électriques : méthodologie de conception optimale, Revue internationale de génie électrique, pp.695-715, 2008.

F. Dubas, C. Espanet, and A. Miraoui, Modélisation analytique et maximisation de l'induction magnétique à vide d'un moteur à aimants permanents montes en surface, Électrotechnique du Futur (EF), pp.1-10, 2003.

J. Legranger, Contribution à l'étude des machines brushless à haut rendement dans les applications de moteurs-générateurs embarqués, Thèse de Doctorat, 2009.

H. C. Mai, Conception optimale d'une motorisation électrique pour application à un véhicule hybride léger, Thèse de Doctorat, 2011.

F. Dubas and C. Espanet, Analytical Solution of the Magnetic Field in Permanent-Magnet Motors Taking Into Account Slotting Effect: No-Load Vector Potential and Flux Density Calculation, IEEE Transactions on Magnetics, vol.45, issue.5, pp.2097-2109, 2009.
DOI : 10.1109/TMAG.2009.2013245

URL : https://hal.archives-ouvertes.fr/hal-00467151

C. Espanet, Contributions à la conception des machines à aimants permanents : aspects méthodologiques et applications à des moteurs à forte intégration fonctionnelle, Habilitation à Diriger des Recherches, 2005.

T. P. Do, Simulation dynamique des actionneurs et capteurs électromagnétiques par réseaux de réluctances: modèles, méthodes et outils, Thèse de Doctorat, 2010.

J. Perho, Reluctance Network for Analysing Induction Machines, Thèse de Doctorat, 2002.

K. Nakamura, S. Hisada, K. Arimatsu, T. Ohinata, K. Sakamoto et al., Iron Loss Calculation in a Three-Phase-Laminated-Core Variable Inductor Based on Reluctance Network Analysis, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4781-4784, 2009.
DOI : 10.1109/TMAG.2009.2023247

. Nejdar, Modélisation basée sur la méthode des réseaux de perméances en vue de l'optimisation de machines synchrones à simple et à double excitation, Thèse de Doctorat, 2011.

A. Fasquelle, Contribution à la modélisation multi-physique: électo-vibro-acoustique et aérothermique de machines de traction, 2007.

G. Lacombe, Définition et réalisation d'une nouvelle génération de logiciel pour la conception des moteurs du futur, Thèse de Doctorat, Institut National Polytechnique de Grenoble-INPG, 2007.

H. Dogan, F. Wurtz, L. Garbuio, and A. Foggia, Optimization of Permanent Magnet Synchronous Machine for Electrical Vehicle Application, OIPE'12 (International Workshop On Optimization and Inverse Problems in Electromagnetism), 2012, pp.230-231
URL : https://hal.archives-ouvertes.fr/hal-00735561

Z. Makni, M. Besbes, and C. Marchand, Multiphysics Design Methodology of Permanent-Magnet Synchronous Motors, IEEE Transactions on Vehicular Technology, vol.56, issue.4, pp.1524-1530, 2007.
DOI : 10.1109/TVT.2007.896981

S. A. Randi, Conception systémique de chaînes de traction synchrones pour véhicule électrique à large gamme de vitesse, Thèse de Doctorat, INP de Toulouse (Institut Nationale Polytechnique), 2003.

M. Lebrun, Simulation et CAO en automatique et mécatronique, 2003.

H. Weh and H. May, Achievable force densities for permanent magnet excited machines in new configuration, Proc. Int. Conf. Electri. Machines, pp.1107-1111, 1986.

Y. Bencheikh, Y. Ouazir, and R. Ibtiouen, Tubular Linear Induction Motor analysis by using finite elements and current filament models, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-6, 2010.
DOI : 10.1109/ICELMACH.2010.5608186

F. Rinderknecht and H. Herzog, Calculation of a linear generator for a hybrid vehicle concept, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-5, 2010.
DOI : 10.1109/ICELMACH.2010.5607780

A. Mahmoudi, N. A. Rahim, and W. P. Hew, Axial-flux permanent-magnet machine modeling, design, simulation and analysis, Scientific Research and Essays, vol.6, issue.12, pp.2525-2549, 2011.

M. P. Bendsoe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Computer Methods in Applied Mechanics and Engineering, vol.71, issue.2, pp.197-224, 1988.
DOI : 10.1016/0045-7825(88)90086-2

J. S. Choi and J. Yoo, Structural Topology Optimization of Magnetic Actuators Using Genetic Algorithms and <emphasis emphasistype="smcaps">ON/OFF</emphasis> Sensitivity, IEEE Transactions on Magnetics, vol.45, issue.5, pp.2276-2279, 2009.
DOI : 10.1109/TMAG.2009.2016297

D. Kim, J. K. Sykulski, and D. A. Lowther, The Implications of the Use of Composite Materials in Electromagnetic Device Topology and Shape Optimization, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1154-1157, 2009.
DOI : 10.1109/TMAG.2009.2012661

T. Ishikawa, K. Yonetake, and N. Kurita, An Optimal Material Distribution Design of Brushless DC Motor by Genetic Algorithm Considering a Cluster of Material, IEEE Transactions on Magnetics, vol.47, issue.5, pp.1310-1313, 2011.
DOI : 10.1109/TMAG.2010.2093572

S. Kreuawan, Modélisation et conception optimale pour les applications ferroviaires, Thèse de Doctorat, 2008.

H. M. Kim, Target Cascading in Optimal System Design, Thèse de Doctorat, 2001.
DOI : 10.1115/1.1582501

R. D. Braun and I. M. Kroo, Development and application of the collaborative optimization architecture in a multi-disciplinary design environment, Multidisciplinary design optimization: state of the art. SIAM, pp.98-116, 1997.

J. Sobieszczanski-sobieski and L. R. Center, Advancement of bi-level integrated system synthesis (bliss). Citeseer, 2000.

P. Chapoulie, Modélisation systémique pour la conception de véhicules électriques multi-sources -Application aux véhicules équipes de générateurs photovoltaïques ou de supercondensateurs, Thèse de Doctorat, 1999.

N. Bracikowski, D. Ilea, F. Gillon, M. Hecquet, and P. Brochet, Multi-physics Design Rules of Permanent Magnet Synchronous Machine with Lumped Models, International Conference on the Computation of Electromagnetic Fields, 2011.

I. Kroo, Distributed multi-disciplinary design and collaborative optimization VKI lecture series on Optimization methods & Tools for Multi-criteria/Multi-disciplinary Design, p.22, 2004.

J. C. Passieux, Approximation radiale et méthode LATIN multi-échelle en temps et en espace, Thèse de Doctorat, 2008.

A. S. Nagorny, R. H. Jansen, and D. M. Kankam, Experimental Performance Evaluation of a High-Speed Permanent Magnet Synchronous Motor and Drive for a Flywheel Application at Different Frequencies, Book of Abstracts ICEM 2006--XVII International Conference on Electrical Machines, 2006.

J. F. Gieras, Advancements in electric machines, 2008.

G. Li, Contribution à la conception des machines électriques à rotor passif pour des applications critiques : modélisations électomagnétiques et thermiques sur cycle de fonctionnement, étude du fonctionnement en mode degradé, Thèse de Doctorat, 2011.

J. M. Biedinger and J. P. Vilain, Dimensionnement des actionneurs ??lectriques aliment??s ?? fr??quence variable sous faible tension, The European Physical Journal Applied Physics, vol.7, issue.3, pp.247-261, 1999.
DOI : 10.1051/epjap:1999219

J. Pyrhonen, J. Nerg, P. Kurronen, and U. Lauber, High-Speed High-Output Solid-Rotor Induction-Motor Technology for Gas Compression, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.272-280, 2010.
DOI : 10.1109/TIE.2009.2021595

D. Krahenbuhl, C. Zwyssig, H. Weser, and J. W. Kolar, A Miniature 500&#x2009;000-r/min Electrically Driven Turbocompressor, IEEE Transactions on Industry Applications, vol.46, issue.6, pp.2459-2466, 2010.
DOI : 10.1109/TIA.2010.2073673

H. W. Cho, S. M. Jang, and S. K. Choi, A Design Approach to Reduce Rotor Losses in High-Speed Permanent Magnet Machine for Turbo-Compressor, IEEE Transactions on Magnetics, vol.42, issue.10, pp.3521-3523, 2006.
DOI : 10.1109/TMAG.2006.879086

J. He and F. Lin, A high frequency high power IGBT inverter drive for 45 HP/16,000 RPM brushless homopolar inductor motor, Industry Applications Conference, 1995.

N. Khentout and B. Meftah, Design and realization of a measurement system of cold neutron speeds by TOF method, 2009 1st International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications, pp.1-8, 2009.
DOI : 10.1109/ANIMMA.2009.5503806

C. Zwyssig, J. W. Kolar, and S. D. Round, Megaspeed Drive Systems: Pushing Beyond 1 Million r/min, IEEE/ASME Transactions on Mechatronics, vol.14, issue.5, pp.564-574, 2009.
DOI : 10.1109/TMECH.2008.2009310

J. Peirs, D. Reynaerts, and F. Verplaetsen, Development of an axial microturbine for a portable gas turbine generator, Journal of Micromechanics and Microengineering, vol.13, issue.4, p.190, 2003.
DOI : 10.1088/0960-1317/13/4/328

H. Cui, F. Wang, and T. Zhang, Research on repression method of harmonics for high speed motor power supply, Electrical Machines and Systems ICEMS. International Conference on, pp.610-613, 2007.

T. Halkosaari, Optimal U/f-control of high speed permanent magnet motors, 2006 IEEE International Symposium on Industrial Electronics, pp.2303-2308, 2006.
DOI : 10.1109/ISIE.2006.295932

M. Sanada and S. Morimoto, Efficiency Improvement in High Speed Operation using Slot-less Configuration for Permanent Magnet Synchronous Motor, 2007 IEEE Power Engineering Society General Meeting, pp.1-7, 2007.
DOI : 10.1109/PES.2007.385689

M. Couderc, Contribution à l'élaboration d'une méthodologie générale de conception des machines à aimants permanents à haute vitesse, 2008.

J. Pyrhonen, T. Jokinen, V. Hrabovcova, and H. Niemela, Design of rotating electrical machines, 2008.
DOI : 10.1002/9781118701591

A. Maeda and H. Tomita, Power and Speed Limitations in High Speed Electrical Machines, Proc. IPEC-Yokohama, pp.1321-1326, 1995.

A. Borisavljevic, H. Polinder, and J. A. Ferreira, On the Speed Limits of Permanent-Magnet Machines, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.220-227, 2010.
DOI : 10.1109/TIE.2009.2030762

B. Multon, H. B. Ahmed, M. Ruellan, and G. Robin, Comparaison du couple massique de diverses architectures de machines tournantes synchrones ?? aimants, Société de l'Électricité, de l'Électronique et des Technologies de l'Information et de la Communication (SEE)(8), pp.85-93, 2006.
DOI : 10.3845/ree.2006.064

A. Binder, T. Schneider, and M. Klohr, Fixation of buried and surface mounted magnets in high-speed permanent magnet synchronous motors, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005., pp.2843-2848, 2005.
DOI : 10.1109/IAS.2005.1518863

T. Wang, F. Wang, H. Bai, and J. Xing, Optimization design of rotor structure for high speed permanent magnet machines, Electrical Machines and Systems ICEMS. International Conference on, pp.1438-1442, 2007.

M. Moret, Roulements et butées à billes et à rouleaux, 1990.

D. Nelias, Contribution à l'étude des roulements, Habilitation à Diriger des Recherches, Institut des Sciences Appliquées de, 1999.

A. Arkkio, T. Jokinen, and E. Lantto, Induction and permanent-magnet synchronous machines for high-speed applications, 2005 International Conference on Electrical Machines and Systems, pp.871-876, 2005.
DOI : 10.1109/ICEMS.2005.202668

O. Aglen and A. Andersson, Thermal analysis of a high-speed generator, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003., pp.547-554, 2003.
DOI : 10.1109/IAS.2003.1257554

J. Saari, Thermal analysis of high-speed induction machines, Thèse de Doctorat, 1998.

P. K. Rajagopalan and V. B. Murty, Effects of axial slits on the performance of induction machines with solid iron rotors Power Apparatus and Systems, IEEE Transactions on, issue.4, pp.1695-1709, 1969.

S. Lefebvre and F. Miserey, Composants à semi-conducteur pour l'électronique de puissance, 2004.

H. Polinder and M. J. Hoeijmakers, Effect of a shielding cylinder an the rotor losses in a rectifier-loaded PM machine, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129), pp.163-170, 2000.
DOI : 10.1109/IAS.2000.881056

L. Albert, Modélisation et optimisation des alternateurs à griffes, Thèse de Doctorat, Institut National Polytechnique de Grenoble-INPG, 2004.

. Baldor, Inverter-Driven Induction Motors Shaft and Bearing Current Solutions, Industrial White Paper, vol.11, 2002.

M. A. Jabbar, A. M. Khambadkone, and L. Qinghua, Design and analysis of exterior and interior type high-speed permanent magnet motors, Proc. Aust. Univ. Power Electron. Conf, pp.484-489, 2001.

S. M. Murakami and Y. Honda, A Study of Rotor Configuration for IPMSM with Concentrated Winding Considering the Iron Loss, Transactions, vol.121, issue.5, pp.597-603, 2001.

N. Bianchi, S. Bolognani, and F. Luise, Potentials and Limits of High-Speed PM Motors, IEEE Transactions on Industry Applications, vol.40, issue.6, pp.1570-1578, 2004.
DOI : 10.1109/TIA.2004.836173

M. Sanada and S. Morimoto, Efficiency improvement at high-speed operation using large air-gap configuration for PMSM, 2008 18th International Conference on Electrical Machines, pp.1-6, 2008.
DOI : 10.1109/ICELMACH.2008.4799932

Y. Huang, Q. Hu, J. Zhao, J. Zhu, and Y. Guo, Comparative Study of High-Speed PM Motors with Laminated Steel and Soft Magnetic Composite Cores, 2007 IEEE Industry Applications Annual Meeting, pp.67-72, 2007.
DOI : 10.1109/07IAS.2007.81

J. L. Der-veen, L. J. Offringa, and A. J. Vandenput, Minimising rotor losses in high-speed high-power permanent magnet synchronous generators with rectifier load Electric Power Applications, IEE Proceedings, vol.144, issue.5, pp.331-337, 1997.

C. Doc, V. Lanfranchi, and J. P. Vilain, Conception de machine synchro-réluctante de faible puissance sous fortes contraintes, Conférence EF, 2009.

D. Mami, Définition, conception et expérimentation de structures d'actionneurs électomecaniques innovants incluant par conception des fonctionnalités de sureté et de sécurite de fonctionnement, Thèse de Doctorat, 2010.

A. M. El-refaie, Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.107-121, 2010.
DOI : 10.1109/TIE.2009.2030211

A. Chen, R. Nilssen, and A. Nysveen, Performance comparisons among radial flux, multi-stage axial flux and three-phase transverse flux PM machines for downhole applications, 2009 IEEE International Electric Machines and Drives Conference, pp.779-789, 2010.
DOI : 10.1109/IEMDC.2009.5075328

Z. Q. Zhu and D. Howe, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. II. Armature-reaction field, IEEE Transactions on Magnetics, vol.29, issue.1, pp.136-142, 1993.
DOI : 10.1109/20.195558

B. Multon, Les machines synchrones autopilotées Préparation à l'agrégation de génie électrique, 2004.

T. Sebastian, G. Slemon, and M. Rahman, Modelling of permanent magnet synchronous motors, IEEE Transactions on Magnetics, vol.22, issue.5, pp.1069-1071, 1986.
DOI : 10.1109/TMAG.1986.1064466

T. Sebastian and G. Slemon, Transient torque and short circuit capabilities of variable speed permanent magnet motors, IEEE Transactions on Magnetics, vol.23, issue.5, pp.3619-3621, 1987.
DOI : 10.1109/TMAG.1987.1065207

S. Report, China and the Future of Rare Earth Elements, 2010.

P. Fridmann, Equalizing method for a network of a non compressible fluid, p.724, 2001.

A. A. Aboulnaga and A. Emadi, Simplified simulation and modeling technique for integrated magnetic components in power electronic converters, 2004 10th International Workshop on Computational Electronics (IEEE Cat. No.04EX915), pp.725-730, 2004.
DOI : 10.1109/INTLEC.2004.1401551

H. C. Roters, Electromagnetic devices, 1941.

J. F. Gieras and M. Wing, Permanent magnet motor technology: design and applications, CRC, vol.20096073, 2002.
DOI : 10.1201/9781420064414

J. Makarovic, Lightweight positioning: design and optimization of an actuator with two controlled degrees of freedom, Thèse de Doctorat, 2006.

H. M. Paynter, Analysis and design of engineering systems, 1961.

D. C. Karnopp, D. L. Margolis, and R. C. Rosenberg, System Dynamics: A Unified Approach, IEEE Transactions on Systems, Man, and Cybernetics, vol.6, issue.10, 1990.
DOI : 10.1109/TSMC.1976.4309434

B. Ould-bouamama-and and G. Dauphin-tanguy, Modélisation par bond graph : élements de base pour l'energétique, 2006.

B. Ould-bouamama-and and G. Dauphin-tanguy, Modélisation par bond graph : application aux systèmes energétiques, 2006.

D. C. Hamill, Gyrator-capacitor modeling: a better way of understanding magnetic components, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition, ASPEC'94, p.94, 1994.
DOI : 10.1109/APEC.1994.316381

C. Steinmetz, On the law of hysteresis American Institute of Electrical Engineers, Transactions, vol.9, issue.1, pp.1-64

C. E. Lin, J. Wei, C. Huang, and C. Huang, A new method for representation of hysteresis loops, IEEE Transactions on Power Delivery, vol.4, issue.1, pp.413-420, 1989.
DOI : 10.1109/61.19231

K. Nakamura, O. Ichinokura, M. Maeda, S. Akatsuka, K. Takasugi et al., Analysis of orthogonal-core type linear variable inductor and application to VAr compensator, IEEE Transactions on Magnetics, vol.36, issue.5, pp.3565-3567, 2000.
DOI : 10.1109/20.908899

M. Derrhi and A. Lebrun, Modélisation de la machine asynchrone par la méthode des réseaux de perméances -Application au diagnostic, Thèse de Doctorat, 2000.

C. Fleury, Modélisation de l'entraînement électrique synchrone auto-commuté, Thèse de Doctorat, 1995.

J. F. Gieras, J. C. Lai, and C. Wang, Noise of polyphase electric motors, CRC, vol.129, 2006.
DOI : 10.1201/9781420027730

J. O. Fiedler, K. A. Kasper, and R. W. De-doncker, Calculation of the Acoustic Noise Spectrum of SRM Using Modal Superposition, IEEE Transactions on Industrial Electronics, vol.57, issue.9, pp.2939-2945, 2010.
DOI : 10.1109/TIE.2010.2046573

G. Parent, M. Rossi, M. Hecquet, V. Lanfranchi, and M. Bekemans, Multi-physics modeling of industrial inductors associated to converters, 2010 IEEE Vehicle Power and Propulsion Conference, pp.1-6, 2010.
DOI : 10.1109/VPPC.2010.5729230

A. Matveev, Development of methods, algorithms and software for optimal design of switched reluctance drives, Thèse de Doctorat, 2006.

P. O. Rasmussen, F. Blaabjerg, J. K. Pedersen, P. C. Kjaer, and T. J. Miller, Acoustic noise simulation for switched reluctance motors with audible output, Proce. EPE 99- Lausanne, pp.1-13, 1999.

D. Man, Contrôle actif du rayonnement acoustique des plaques : une approche à faible autorité, Thèse de Doctorat, 2004.

B. Cassoret, Réduction active du bruit magnétique des machines asynchrones directement connectées au réseau, Thèse de Doctorat, 1996.

H. Jordan, Electric Motor Silencer -Formation and Elimination of the Noises in the Electric Motors, 1950.

L. A. Dorfman and N. Kemmer, Hydrodynamic resistance and the heat loss of rotating solids, 1963.

K. M. Becker and J. Kaye, Measurements of Diabatic Flow in an Annulus With an Inner Rotating Cylinder, Journal of Heat Transfer, vol.84, issue.2, p.97, 1962.
DOI : 10.1115/1.3684335

L. V. Rossi, M. Parent, G. Hecquet, and M. , Thermal modeling of industrial inductors and transformers associated to the converters, 19th International Conference on Electrical Machines, 2010.

C. Delforge, Modélisation d'un actionneur asynchrone et de sa commande vectorielle par réseaux de perméances, Thèse de Doctorat, 1995.

H. Roisse, Modélisation d'une machine synchrone à aimants permanents par réseau de perméances, Thèse de Doctorat, 1998.

H. Roisse, M. Hecquet, and P. Brochet, Simulations of synchronous machines using a electric-magnetic coupled network model, IEEE Transactions on Magnetics, vol.34, issue.5, pp.3656-3659, 1998.
DOI : 10.1109/20.717864

V. A. Niemela, G. R. Skutt, A. M. Urling, Y. N. Chang, T. G. Wilson et al., Calculating the short-circuit impedances of a multi-winding transformer from its geometry, Power Electronics Specialists Conference, 1989.

F. Robert, Modélisation et simulation de transformateurs pour alimentations à decoupage, Thèse de Doctorat, 1999.

H. B. Ahmed, N. Bernard, G. Feld, and A. B. Multon, Machines synchrones : modélisation en régime permanent, 2006.

K. J. Meessen, P. Thelin, J. Soulard, and E. A. Lomonova, Inductance Calculations of Permanent-Magnet Synchronous Machines Including Flux Change and Self- and Cross-Saturations, IEEE Transactions on Magnetics, vol.44, issue.10, pp.2324-2331, 2008.
DOI : 10.1109/TMAG.2008.2001419

R. Chavernoz and M. Pasdeloup, Les pertes parasites dans les moteurs d'induction., " Bulletin de la direction des études et recherches EDF, série B, issue.2, 1969.

D. Petrichenko, M. Hecquet, P. Brochet, V. Kuznetsov, and D. Laloy, Design and simulation of turbo-alternators using a coupled permeance network model, IEEE Transactions on Magnetics, vol.42, issue.4, pp.1259-1262, 2006.
DOI : 10.1109/TMAG.2006.871995

J. A. Farooq, Étude du problème inverse en électomagnetisme en vue de la localisation des défauts de désaimantation dans les actionneurs à aimants permanents, Thèse de Doctorat, 2008.

F. Hecht and A. Marrocco, A finite element simulation of an alternator connected to a nonlinear external circuit, IEEE Transactions on Magnetics, vol.26, issue.2, pp.964-967, 1990.
DOI : 10.1109/20.106479

F. Wurtz, Une nouvelle approche pour la conception sous contraintes de machines électriques, Thèse de Doctorat, 1996.

A. Foggia, Méthodes de calcul des inductances de fuites, 1999.

D. C. Krop, E. A. Lomonova, and A. J. Vandenput, Application of Schwarz-Christoffel Mapping to Permanent-Magnet Linear Motor Analysis, IEEE Transactions on Magnetics, vol.44, issue.3, pp.352-359, 2008.
DOI : 10.1109/TMAG.2007.914513

K. Boughrara, D. Zarko, R. Ibtiouen, O. Touhami, and A. Rezzoug, Magnetic field analysis of surface-mounted permanent-magnet synchronous motors using analytical and numerical conformal mapping, Magnetics, IEEE Transactions, issue.8, pp.3166-3178

E. Ilhan, E. Motoasca, J. Paulides, and E. Lomonova, Conformal mapping: Schwarz-Christoffel method for flux-switching PM machines, Mathematical Sciences, vol.6, issue.1, p.37, 2012.
DOI : 10.1186/2251-7456-6-37

T. , T. Van, J. Coulomb, B. Delinchant, O. Chadebec et al., Hybridizing network reluctance and boundary integral methods: comparisons on an E-core actuator, COMPUMAG 2011, p.p, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00610924

M. Hecquet, Contribution à la modélisation des systèmes électotechniques par la méthode des schémas équivalents magnétiques. Application à l'alternateur automobile, Thèse de Doctorat, 1995.

Y. Kano, T. Kosaka, and N. Matsui, A Simple Nonlinear Magnetic Analysis for Axial-Flux Permanent-Magnet Machines, IEEE Transactions on Industrial Electronics, vol.57, issue.6, pp.2124-2133, 2010.
DOI : 10.1109/TIE.2009.2034685

Z. Q. Zhu, Y. Pang, D. Howe, S. Iwasaki, R. Deodhar et al., Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model, IEEE Transactions on Magnetics, vol.41, issue.11, pp.4277-4287, 2005.
DOI : 10.1109/TMAG.2005.854441

S. Han, T. M. Jahns, and W. L. Soong, A Magnetic Circuit Model for an IPM Synchronous Machine Incorporating Moving Airgap and Cross-Coupled Saturation Effects, 2007 IEEE International Electric Machines & Drives Conference, pp.21-26, 2007.
DOI : 10.1109/IEMDC.2007.383546

V. Ostovic, Dynamics of saturated electric machines, 1989.
DOI : 10.1007/978-1-4613-8933-0

T. Raminosoa, J. A. Farooq, A. Djerdir, and A. Miraoui, Reluctance network modelling of surface permanent magnet motor considering iron nonlinearities, Energy Conversion and Management, vol.50, issue.5, pp.1356-1361, 2009.
DOI : 10.1016/j.enconman.2009.01.012

G. O. Bouchard, Conception de moteurs asynchrones triphasés. Édition de l'École Polytechnique, 1997.

L. A. Kilgore, Calculation of Synchronous Machine Constants- Reactances and Time Constants Affecting Transient Characteristics, Transactions of the American Institute of Electrical Engineers, vol.50, issue.4, pp.1201-1213, 1931.
DOI : 10.1109/T-AIEE.1931.5055943

K. Hafiz, G. Nanda, and N. C. Kar, Performance Analysis of Aluminum- and Copper-Rotor Induction Generators Considering Skin and Thermal Effects, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.181-192, 2010.
DOI : 10.1109/TIE.2009.2034177

?. ?. ???????, ?. ?. ??????, and ?. ?. ????????, ?????????????? ????????????? ?????/??? ???, 2005.

K. Nakamura, K. Saito, and O. Ichinokura, Dynamic analysis of interior permanent magnet motor based on a magnetic circuit model, IEEE Transactions on Magnetics, vol.39, issue.5, pp.3250-3252, 2003.
DOI : 10.1109/TMAG.2003.816738

O. Ichinokura, K. Sato, T. Jinzenji, and K. Tajima, model of orthogonal???core transformers, Journal of Applied Physics, vol.69, issue.8, pp.4928-4930
DOI : 10.1063/1.348178

A. Rezgui, L. Gerbaud, and B. Delinchant, VHDL-AMS to Support DAE-PDE Coupling and Multilevel Modeling, IEEE Transactions on Magnetics, vol.48, issue.2, pp.627-630, 2012.
DOI : 10.1109/TMAG.2011.2177248

URL : https://hal.archives-ouvertes.fr/hal-00790089

C. Kral, R. Sprangers, J. Waarma, A. Haumer, O. Winter et al., Modeling demagnetization effects in permanent magnet synchronous machines, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-6, 2010.
DOI : 10.1109/ICELMACH.2010.5608315

B. Du-peloux, L. Gerbaud, F. Wurtz, V. Leconte, and F. Dorschner, Automatic generation of sizing static models based on reluctance networks for the optimization of electromagnetic devices, IEEE Transactions on Magnetics, vol.42, issue.4, pp.715-718, 2006.
DOI : 10.1109/TMAG.2006.872010

URL : https://hal.archives-ouvertes.fr/hal-00189540

M. Latreche, Modélisation magnétique et thermique des machines électriques par schémas équivalents, Thèse de Doctorat, Institut National, 1987.

H. Foch, F. F. , and T. Meynard, Onduleurs de tension : Mise en oeuvre, pp.3177-3178, 2000.

M. Lajoie-mazenc and P. Viarouge, Alimentation des machines synchrones, pp.3630-3631, 1991.

M. Debruyne, Traction électrique Présentation faite à l'École Centrale de Lille, 2006.

M. Jufer, Électromécanique (traité d'électricité, d'électronique et d'électrotechnique), 1979.

P. L. Timar, Noise and vibration of electrical machines, Elsever, 1989.

S. A. Long, Z. Q. Zhu, and D. Howe, Vibration behaviour of stators of switched reluctance motors Electric Power Applications, IEE Proceedings, vol.148, issue.3, pp.257-264, 2001.

A. E. Love, A treatise on the mathematical theory of elasticity, 1920.
URL : https://hal.archives-ouvertes.fr/hal-01307751

A. Hubert, Contribution à l'étude des bruits acoustiques générés lors de l'association machines électriques -convertisseurs statiques de puissance : application à la machine asynchrone, Thèse de Doctorat, 2000.

S. Huang, M. Aydin, and T. A. Lipo, Electromagnetic vibration and noise assessment for surface mounted PM machines, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262), pp.1417-1426, 2001.
DOI : 10.1109/PESS.2001.970284

S. J. Yang, Low-noise electrical motors, 1981.

P. Baron, La mesure objective des bruits -ses possibilités et limitations, Annals of Telecommunications, vol.4, issue.10, pp.330-340, 1949.

J. Reinert, A. Brockmeyer, and R. W. De-doncker, Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation, IEEE Transactions on Industry Applications, vol.37, issue.4, pp.1055-1061, 2001.
DOI : 10.1109/28.936396

A. Krings and J. Soulard, Overview and comparison of iron loss models for electrical machines, Journal of Electrical Engineering, vol.10, issue.3, pp.162-169, 2010.

E. Herbert, User-friendly data for magnetic core loss calculations, Unpublished, 2008.

H. Polinder and M. J. Hoeijmakers, Eddy-current losses in the permanent magnets of a PM machine, Eighth International Conference on Electrical Machines and Drives, pp.138-142, 1997.
DOI : 10.1049/cp:19971054

R. Glises, Machines électriques tournantes, simulation du comportement thermique, 1998.

S. Watanabe, S. Kenjo, K. Ide, F. Sato, and M. Yamamoto, Natural frequencies and vibration behaviour of motor stators Power Apparatus and Systems, IEEE Transactions on, issue.4, pp.949-956, 1983.

Y. Rao, S. H. Shi, and C. P. Wong, An improved methodology for determining temperature dependent moduli of underfill encapsulants Components and Packaging Technologies, IEEE Transactions on, vol.23, issue.3, pp.434-439, 2000.

F. Dubas, Conception d'un moteur rapide à aimants permanents pour l'entraînement de compresseur de piles à combustible, Thèse de Doctorat, 2006.

G. Grellet, Pertes dans les machines tournantes, 1989.

J. Saint-michel, Bobinage des machines tournantes à courant alternatif, 2001.

G. S. Bausière and F. Labrique, Les convertisseurs de l'électonique de puissance, 1997.

J. Kennedy and R. Eberhart, Particle swarm optimization, Proceedings of ICNN'95, International Conference on Neural Networks, pp.1942-1948, 1995.
DOI : 10.1109/ICNN.1995.488968

L. , S. Coelho, L. Z. Barbosa, and L. Lebensztajn, Multi-objective Particle Swarm Approach for the Design of a Brushless DC Wheel Motor, Magnetics, IEEE Transactions on, vol.46, issue.8, pp.2994-2997, 2010.

C. R. Raquel and P. C. Jr, An effective use of crowding distance in multiobjective particle swarm optimization, Proceedings of the 2005 conference on Genetic and evolutionary computation , GECCO '05, pp.257-264, 2005.
DOI : 10.1145/1068009.1068047

D. Ilea, M. M. Radulescu, F. Gillon, and P. Brochet, Multi-objective optimization of a switched reluctance motor for light electric traction applications, 2010 IEEE Vehicle Power and Propulsion Conference, pp.1-6, 2010.
DOI : 10.1109/VPPC.2010.5729005

R. Islam and I. Husain, Analytical Model for Predicting Noise and Vibration in Permanent-Magnet Synchronous Motors, IEEE Transactions on Industry Applications, vol.46, issue.6, pp.2346-2354, 2010.
DOI : 10.1109/TIA.2010.2070473

. Shirinskii, Multi-physics modeling of permanent magnet synchronous machine by lumped models, Industrial Electronics IEEE Transactions on, vol.59, issue.6, pp.2426-2437

B. Nicolas, F. Mathias, H. Michel, B. Pascal, and L. Vincent, Multi-physics design rules using lumped models for a permanent magnet synchronous machine Conférences InternationalesCharacterisation of radial vibration force and electromagnetic noise behaviour of a PWM-fed permanent magnet synchronous machine, 20th International Conference on Electrical Machines, IEEE -ICEM 2012, pp.9-2012, 2013.

B. Nicolas, H. Michel, G. Frédéric, B. Pascal, B. Nicolas et al., Design rules of permanent magnet synchronous machine with lumped modelsMulti-physics Design Rules of Permanent Magnet Synchronous Machine with Lumped Models, 12th International Workshop on Optimization and Inverse Problems in Electromagnetism International Conference on the Computation of Electromagnetic Fields, pp.9-2012, 2011.

B. Nicolas, H. Michel, B. Pascal, B. Nicolas, I. Dan et al., Multi-Physics Lumped Models For The Permanent Magnet Synchronous Machine International Conference on Modeling and Simulation of Electric Machines, Converters and SystemsDesign of Permanent Magnet Synchronous Machine in Order to Reduce Noise Under Multi-physic ConstraintsMulti-physics modeling of permanent magnet synchronous machine by lumped modelsMulti-physics modeling of permanent magnet synchronous machine, 19th International Conference on Electrical Machines 13th International Conference On Electromechanics, Electrotechnology, Electromaterials And Components, pp.6-2011, 2010.

C. Nicolas, B. Michel, H. Pascal, B. , F. St et al., Optimisation multi-objectif sous contraintes multi-physiques d'une machine synchrone à aimants permanents utilisant des modèles à constantes localiséesModélisation multi-physique d'une machine synchrone à aimants permanents par des schémas à constantes localisées, Conférences Nationales : [ EF2011, Conférence électrotechnique du Futur, pp.12-2011, 2009.