ABB_ StakPak? IGBT Press-packs: A new Packaging Concept for High Power Electronics, Doc. No, 2004. ,
Lead-free Solders in Microelectronics, Materials Science and Engineering: R: Reports, vol.27, issue.5-6, 2000. ,
DOI : 10.1016/S0927-796X(00)00010-3
Double-Sided Low-Temperature Joining Technique for Power Cycling Cpapability at High Temperature, Conférence EPE, 2005. ,
Packaging and Interconnection Technologies of Power Devices, Challenges and Future Trends, Word Academy of Science, Engineering and technology, issue.49, p.2009 ,
Comparison of isothermal mechanical fatigue properties of lead-free solder joints and bulk solders, Materials Science and Engineering: A, vol.394, issue.1-2, pp.20-27, 2005. ,
DOI : 10.1016/j.msea.2004.10.043
Modeling of Heat Speaders for Cooling Power and Mobile Electronic devices, Power Electronics Specialists, pp.1080-1086, 2005. ,
Experimental Investigations of Trench Field Stop IGBT under Repetitive Short-Circuits Operations, Power Electronics Specialists Conference, pp.4355-4360, 2008. ,
Evaluation of IGBT thermo-sensitive electrical parameters under different dissipation conditions ??? Comparison with infrared measurements, Microelectronics Reliability, vol.52, issue.11, pp.2617-2626, 2012. ,
DOI : 10.1016/j.microrel.2012.03.032
URL : https://hal.archives-ouvertes.fr/hal-01059453
A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing, Mechanical Systems and Signal Processing, vol.24, issue.4, pp.891-903, 2010. ,
DOI : 10.1016/j.ymssp.2009.09.003
Rapid formation of intermetallic compounds by interdiffusion in the Cu-Sn and Ni-Sn systems, Acta Metallurgica et Materialia, vol.43, issue.1, pp.329-337, 1995. ,
Electromigration-induced Failure of Metallic Connection in Power Electronic Packaging, Proceedings, 2000 Annual Power Electronics Seminar, pp.566-571, 2000. ,
Semiconductors for high???voltage, vertical channel field???effect transistors, Journal of Applied Physics, vol.53, issue.3, pp.1759-1764, 1982. ,
DOI : 10.1063/1.331646
Power semiconductor device figure of merit for high-frequency applications, IEEE Electron Device Letters, vol.10, issue.10, pp.455-457, 1989. ,
DOI : 10.1109/55.43098
Regularized inversion of a distributed point source model for the reconstruction of defects in eddy current imaging, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.30, issue.6, pp.1777-1791, 2011. ,
DOI : 10.1108/03321641111168093
Characterization of radiated electromagnetic fields using equivalent sources ??? Application to the EMC of power printed circuit boards, Comptes Rendus Physique, vol.10, issue.1, pp.91-99, 2009. ,
DOI : 10.1016/j.crhy.2009.02.002
URL : https://hal.archives-ouvertes.fr/hal-00447294
Bonding and Energy Dissipation in a Nanohook Assembly, Physical review letter, pp.17-2003 ,
Fatigue des composants électroniques de puissance -Physique de défaillance ,
Properties and reliability of silicon nitride substrates with AMB copper conductor, International Symposium on Microelectronics (IMAPS), California USA, 2011. ,
Degradation behavior of 600 V?200 A IGBT modules under power cycling and high temperature environment conditions, Microelectronics Reliability, pp.471719-1724, 2007. ,
Improved Power Chip Electrical Connection, 2001. ,
Évolution de l'intégration en électronique de puissance, Journal sur l'enseignement des sciences et technologies de l'information et des systèmes, 2009. ,
Non-Destructive detection of current in Power Modules by means of magnetic measurements, Proceeding of IAS, pp.2990-2995, 2000. ,
Non-destructive detection of current distribution in power modules based on pulsed magnetic measurement, Microelectronics Reliability, pp.1907-1912, 2003. ,
An overview of the reliability prediction related aspects of high power IGBTs in wind power applications Microelectronics Reliability, pp.1903-1907, 2011. ,
Matériaux semi-conducteur à grand gap : le carbure de silicium (SiC), Technique de l'ingénieur, 2012. ,
Thèse de doctorat, Contribution à l'identification et à l'estimation des contraintes de fatigue thermique des convertisseurs intégrés pour la traction électrique, 2003. ,
Analysis of PowerMOSFET chips failed inthermal instability, Microelectronics Reliability, pp.1419-1424, 2004. ,
Contribution à l'étude de la fatigue et de l'optimisation de fils de connexions électriques pour l'intégration mécatronique automobile, 2011. ,
Optimization of wire connections design for power electronics, Microelectronics Reliability, pp.1892-1897, 2011. ,
Some reliability aspects of IGBT Modules for High-Power applications, thèse de doctorat, Swiss Federal Institute of technology Zurich, 2000. ,
Selected failure mechanisms of modern power modules, Microelectronics Reliability, vol.42, issue.4-5, pp.653-667, 2002. ,
DOI : 10.1016/S0026-2714(02)00042-2
Analysis of wire bond and metallisation degradation mechanisms in DMOS power transistors stressed under thermal overload conditions, Microelectronics Reliability, pp.1485-1490, 2004. ,
Etude du comportement sous haute température de matériaux polymides en vue de la passivation de composants de puissance à semi-conducteur grand gap, 2007. ,
Analytical Solutions to Eddy???Current Probe???Coil Problems, Journal of Applied Physics, vol.39, issue.6, pp.2829-2839, 1968. ,
DOI : 10.1063/1.1656680
Sûreté de fonctionnement des convertisseurs : Nouvelles structures de redondances pour onduleurs sécurisés à tolérance de pannes, 2011. ,
Matériaux semi-conducteur à grand gap III-V à base de GaN, 1999. ,
Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements haute température et avec des cycles thermiques de grande amplitude, Thèse de doctorant à Ecole Normale Supérieure de Cachan, 2006. ,
Effects of metallization thickness of ceramic substrates on the reliability of power assemblies under high temperature cycling, Microelectronics Reliability, pp.1766-1771, 2006. ,
Failure modes on low voltage power MOSFETs under high temperature application, Microelectronics Reliability, pp.9-11, 2007. ,
Partial discharge failure analysis of AlN substrates for IGBT modules, Microelectronic reliability, pp.1425-1430, 2004. ,
Copper metallization influence on power MOS reliability, Microelectronics Reliability, pp.571-576, 2003. ,
Performance and reliability testing of modern IGBT devices under typical operating conditions of aeronautic applications, Microelectronics Reliability, pp.1453-1458, 2008. ,
Weibull characteristics of n-MOSFET's with ultrathin gate oxides under FN stress and lifetime prediction, Microelectronics Reliability, pp.985-989, 2002. ,
Silicon Nitride Substrates for Power Electronic, PCIM Europe, vol.2012, pp.8-10, 2012. ,
New assembly and interconnects beyond sintering methods», 2010. ,
An experimental and numerical study on the forward biased SOA of IGBT's, IEEE Transactions, vol.43, issue.3, 1996. ,
Introduction to Semiconductor Packaging in High Power Electronics, 2004. ,
Reliability of high power IGBT modules testing on thermal fatigue effects due to traction cycles, Proceeding EPE 1997 Conference, pp.118-123 ,
Reliability and lifetime evaluation of different wire bonding technologie for high power IGBT modules, Microelectronic Reliability, pp.1153-1158, 1999. ,
Power cycling induced failure mechanisms in solder layers, 2007 European Conference on Power Electronics and Applications, 2007. ,
DOI : 10.1109/EPE.2007.4417702
Avalanche injection and second breakdown in transistors, IEEE Transactions on Electron Devices, vol.17, issue.4, pp.303-309, 1970. ,
DOI : 10.1109/T-ED.1970.16976
Reliability enhancement with the aid of transient infrared thermal analysis of smart Power MOSFETs during short circuit operation, Microelectronics Reliability, vol.45, issue.9-11, pp.1706-1710, 2005. ,
DOI : 10.1016/j.microrel.2005.07.087
Compact Double-Side Liquid-Impingement-Cooled Integrated Power Electronic Module, Proceedings of the 19th International Symposium on Power Semiconductor Devices and IC's, pp.53-56, 2007. ,
DOI : 10.1109/ISPSD.2007.4294930
Physical limitations on frequency and power parameters of transistors, RCA Rev, pp.63-177, 1965. ,
Le Bihan Multi-sensor Probe and Defect Classification in Eddy Current Tubing Inspection. Sensors and Actuators : A (129), pp.10-14, 2006. ,
Source separation techniques applied to the detection of subsurface defects in the eddy current NDT of aeronautical lap-joints, NDT & E International, vol.43, issue.7, pp.43-606, 2010. ,
DOI : 10.1016/j.ndteint.2010.06.005
URL : https://hal.archives-ouvertes.fr/hal-00832702
Fabrication of star grooves and rhombus grooves micro heat pipe, Journal of Micromechanics and Microengineering, vol.12, issue.5, pp.525-531, 2002. ,
DOI : 10.1088/0960-1317/12/5/303
Figure of merit for semiconductors for high-speed switches, Proc. Of the IEEE, p.225, 1972. ,
DOI : 10.1109/PROC.1972.8593
Characterization and modelling of ageing failures on power MOSFET devices, Microelectronics Reliability, pp.1735-1740, 2007. ,
Short Circuit Properties of Trench-/Field-Stop IGBT's Design Aspects for a Superior Robustness, Proc. 15th ISPSD 2003 ,
Study on the transformer equivalent circuit of eddy current nondestructive evaluation, NDT & E International, vol.36, issue.5, pp.297-302, 2003. ,
DOI : 10.1016/S0963-8695(03)00003-3
Composants à semi-conducteur pour l'électronique de puissance, Editions Tech & Doc, 2004. ,
Thermal management and reliability of multi-chip power modules, Microelectronics Reliability, pp.1663-1669, 2001. ,
Semi-conducteurs de puissance unipolaires et mixtes, D3108 D3109, 2002. ,
Composant semi-conducteur de puissance : caractère propres, D3100, Technique de l'ingénieur, 1999. ,
Introduction to electromagnetic nondestructive test methods, 1971. ,
Study of suitable dielectric material properties for high electric field and high temperature power semiconductor environment, 2003. ,
An overview to integrated power module design for high power electronics packaging, Microelectronics Reliability, pp.365-379, 2000. ,
Novel silver contact material for application on DCB PCIM Europe, pp.8-10, 2012. ,
Design for reliability of power electronics modules, Microelectronics Reliability, pp.1250-1255, 2009. ,
Power cycling induced failure mechanisms in the viewpoint of rough temperature environment, Proceedings of the 5th Int. Conference on Integrated Power Electronic Systems, pp.55-58, 2008. ,
Semiconductor Power Devices_Physics, Characteristics, Reliability, 2011. ,
Dielectric reliability measurement methods: a review, Microelectronics Reliability, pp.33-72, 1998. ,
Characterization of ageing failures on power MOSFET devices by electron and ion microscopies, Microelectronics Reliability, pp.1330-1333, 2009. ,
A study on the short-circuit capability of field-stop igbts, IEEE Transactions on Electron Devices, vol.50, issue.6, 2003. ,
DOI : 10.1109/TED.2003.813505
Section 2, pp.25-51, 1986. ,
New bonding technologies for power packages/modules, State of Art, 2006. ,
Reliability of AIN substrates and their solder joints in IGBT power modules, Microelectronics Reliability, pp.1159-1164, 1999. ,
Etude de la robustesse de transistors JFET à base de SiC vis-à-vis de stress électriques, 2012. ,
Bases de l'électromagnétisme, Techniques de l'ingénieur, 1996. ,
Etude et caractérisation d'une nouvelle connectique adaptée à l'intégration tridimensionnelle pour l'électronique de puissance, 2010. ,
Study for the non-contact characterization of metallization ageing of power electronic semiconductor devices using the eddy current technique, Microelectronics Reliability, pp.1127-1135, 2011. ,
Estimation of a surface current distribution from 2D magnetic field measurements, International Journal of Applied Electromagnetics and Mechanics, vol.39, pp.1-4151, 2012. ,
Monitoring of ageing chips of semiconductor power modules using eddy current sensor, Electronics Letters, vol.49, issue.6, 2013. ,
DOI : 10.1049/el.2012.4387
Surface leakage current related failure of power silicon devices operated at high junction temperature, Microelectronics Reliability, pp.1913-1918, 2003. ,
Measurement of chip currents on IGBT modules, Proceeding EPE 1997 Conference, pp.118-123 ,
Etude expérimentale et théorique de microcaloducs en technologie silicium, 2004. ,
A generalized inverse for matrices, Mathematical Proceedings of the Cambridge Philosophical Society, vol.11, issue.03, pp.406-413, 1955. ,
DOI : 10.1093/qmath/2.1.189
Characterisation of power modules ceramic substrates for reliability aspects, Microelectronics Reliability, vol.49, issue.9-11, pp.1260-1266, 2009. ,
DOI : 10.1016/j.microrel.2009.06.026
URL : https://hal.archives-ouvertes.fr/hal-00417911
Study of ageing of the metallization layer of power semiconductor devices ,
A study of the effect of degradation of the aluminium metallization layer in the case of power semiconductor devices, Microelectronics Reliability, pp.2011-1824 ,
Analyse de matériaux pour la modélisation des mécanismes de défaillance dans les modules électroniques de puissance, 2011. ,
DPSM for Modeling Engineering Problems, 2007. ,
DOI : 10.1002/9780470142400
Thermal mechanical behavior of solder layer in power Modules, Proceedings PCIM Europe, 2009. ,
Voltage acceleration of time-dependent breakdown of ultra-thin gate dielectrics, Microelectronics Reliability, pp.1835-1841, 2005. ,
The future of magnetic sensor, Sensor and Actuators A 56, pp.39-55, 1996. ,
Modélisation conception et réalisation de capteurs de courant performants, thèse de doctorat de l'ENS de Cachan, 1991. ,
Remplacement du plomb dans les alliages de soudure en microélectronique ,
Reliability Model for AI Wire Bonds subjected to Heel Crack Failures, pp.1521-1525, 2000. ,
Conception de multicapteurs à courants de Foucault et inversion des signaux associés pour le contrôle non destructif, 2008. ,
Dufour-gergam Non-Destructive Evaluation of Small Defects Using an Eddy Current Microcoil Sensor Array, Sensor Lett, vol.7, pp.3-400, 2009. ,
A fritless copper conductor system for power electronic applications, Microelectronics Reliability, vol.41, issue.4, pp.491-498, 2001. ,
DOI : 10.1016/S0026-2714(00)00264-X
State of the art and trends in power integration ,
Reliability challenges of automotive power electronics, Microelectronics Reliability, pp.1319-1325, 2009. ,
Al-clad Cu Wire bonds mutilply power cycling lifetime of advanced power modules ,
DCB Substrates as a Base for Power MCM's, Conférence EPTC, pp.315-320, 2000. ,
Advantages and new development of direct bonded copper substrates, Microelectronic Reliability, pp.359-365, 2003. ,
Review of highly integrated solution for Power Electronic device, CIPS NUernberg, 2008. ,
Application manual power electronic, Semikron International GmbH, 2011. ,
The future of wire bonding is wire bonding, CIPS Conference, 2010. ,
Aging and failure modes of IGBT power modules undergoing power cycling in high temperature environments, 2011. ,
Evaluation of Vce Monitoring as a Real-Time Method to Estimate Ageing of Bond Wire-IGBT Modules Stressed by Power Cycling, IEEE Transaction on Industrial Electronics, 2012. ,
Health monitoring of aerospace composite structures ??? Active and passive approach, Composites Science and Technology, vol.69, issue.11-12, pp.11-12, 2009. ,
DOI : 10.1016/j.compscitech.2008.09.034
Thermal fatigue failure effects of large scale package type power transistor modules, Proceeding of ISTFA, pp.309-322, 1989. ,
Physics of Semiconductor Device 2nd edition, 1981. ,
Destruction Mechanisme of PT and NPT-IGBTs in the Short Circuit Operation -an Estimation from the Quasi-Stationary Simulations, Proceedings of International symposium on Power Semiconductor Devices & ICs, pp.337-330, 2001. ,
A novel modelling of surface breaking defects for eddy current quantitative imaging, IEEE Sensors Applications Symposium, 2010. ,
Composants de puissance en SiC ? Technologie, Technique de l'ingénieur, 2007. ,
Solutions innovantes pour le packaging de convertisseurs statiques polyphases, thèse de doctorat de l'Institut polytechnique de Grenoble, 2010. ,
The universal impedance diagram of the ferrite pot core eddy current transducer, IEEE Transactions on Magnetics, vol.25, issue.3, pp.2639-2684, 1999. ,
DOI : 10.1109/20.24503
Design for reliability of power electronic systems, IECON 2012, 38th Annual Conference on IEEE Industrial Electronics Society, 2012. ,
DOI : 10.1109/IECON.2012.6388833
Evaluation Non Destruction de la Qualité des Matériaux, Technique de l'ingénieur-M 4 131, 2002. ,
Physical Limits and Lifetime Limitations of Semiconductor Devices at High Temperatures, Microelectronic Reliability, pp.1113-1120, 1999. ,
Reliability of wire-bonding and solder joint for high temperature operation of power semiconductor device, Microelectronics Reliability, pp.12-2147, 2007. ,
A study on the IGBTs turn-off failure and inhomogeneous operation, proc, of the 6th Internat. Symposium on Power Semiconductor Devices and Ics, pp.31-33, 1994. ,
Effect of high temperature aging on reliability of automotive electronics, Microelectronics Reliability, pp.1938-1942, 2011. ,
Formation and assembly of carbon nanotube bumps for interconnection applications, Diamond and Related Materials, vol.18, issue.9, pp.1109-1113, 2009. ,
DOI : 10.1016/j.diamond.2009.02.022