I. Dans-le-cas-de-la-nacelle-du-robot, 5), l'organe terminal E est lié au solide S = [D 0 D 1 ]. On peut constater, en se référantréférantà l'architecture générique de la nacelle (figure 3.6), que : ? Jambe 1

. Les-tableaux-récapitulatifs, 1 et A.2) donnent une idée sur l'aspect générique de l'approche en le validant sur le H4, pp.4-4

. [. Bibliographie, T. Andreff, P. Dallej, B. Martinet-andreff, R. Espiau et al., Visual servoing from lines Revisiting the ziegler-nichols step response method for PID control Kinematic modelling of some parallel manipulators for control purposes Vision-based control of a Gough-Stewart parallel mechanism using legs observation Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms The direct kinematics of parallel manipulators under joint-sensor redundancy Homography-based 2d visual servoing Totalcalib: a fast and reliable system for off-line calibration of images sequences, The first European Conference on Mechanism Science Proc. Int. Conf. Robotics and Automation (ICRA'05)And06] N. Andreff. Des droites et des robots IEEE International Conference on Robotics and Automation. [Bon03] I. A. Bonev. The true Origins of Parallel Robots. ParalleMIC: the Parallel Mechanisms Information Center Proceedings of the IEEE, pp.677-687679, 1995.

I. A. Bonev and J. Ryu, A new method for solving the direct kinematics of general 6-6 stewart platforms using three linear extra sensors. Mechanism and Machine Theory, Bibliographie ternational Conference on Computer Vision and Pattern RecognitionCha90] F. Chaumette. La relation Vision Commande: théorie et applicationàapplicationà des tâches robotiques Thèse de doctoratCla89] R. Clavel. Une nouvelle structure de manipulateurparalì ele pour la robotique légère, pp.423-436, 1989.

]. R. Cla94, . [. Clavel, P. Chablat, [. Wenger, S. Chuang et al., Robotsparalì eles Techniques de l'ingénieur Informatique industrielle (Tech. ing Informatique industrielle) ISSN 1632-3831 Working modes ans aspects in fully-parallel manipulators Adaptative fuzzy visual servoing in robot control Réalisation d'un robotparalì elè a trois liaisons et six degrés de liberté: le robot space, Thèse de doctorat IEEE International Conference on Robotics and Automation IEEE International Conference on Robotics and AutomationDAM06] T. Dallej, N. Andreff, and P. Martinet. Visual servoing of par4 using leg observation The 32nd Annual Conference of the IEEE Industrial Electronics Society, IECON'06, pp.1964-1970, 1990.

T. Dallej, N. Andreff, and P. Martinet, Image-based visual servoing of the i4r parallel robot without proprioceptive sensors Andreff, and P. Martinet. Towards a generic imagebased visual servoing of parallel robots using legs observation, IEEE International Conference on Robotics and Automation, ICRA'07 Proceedings of the World Congress in Mechanism and Machine Science, pp.1709-1714, 2007.

T. Dallej, N. Andreff, Y. Mezouar, and P. Martinet, 3D Pose Visual Servoing Relieves Parallel Robot Control from Joint Sensing, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.4291-4296, 2006.
DOI : 10.1109/IROS.2006.281959

L. [. Dementhon, . Davisddlr97-]-n, M. Daucher, J. T. Dhome, G. Lapresté et al., Model-based object pose in 25 lines of code Speed command of a robotic system by monocular pose estimate, IEEE International Conference on Intelligent Robots and Systems, IROS'97, pp.104-109123, 1995.

R. [. Denavit, T. Hartenberg, H. Dallej, N. Hadj-abdelkader, P. Andreff et al., A kinematic notation for lower pair mechanisms based on matrices. Transactions of the ASME Kinematic calibration of a gough-stewart platform using and omnidirectional camera [Die98] P. Dietmaier. The Stewart-Gough platform of general geometry can have 40 real postures Advances in Robot Kinematics: Analysis and Control Spacial localization of modelled objects of revolution in monocular perspective vision Force redundancy in parallel manipulators: theoretical and practical issues Determination of the attitude of 3d objects from a single perspective view, Thèse de doctorat Proceedings of the IEEE International Conference on Intelligent Robots and Systems, IROS'06 Proceedings of the first european conference on Computer vision, ECCV 90ECR92] B. Espiau, F. Chaumette, and P. Rives. A new approach to visual servoing in roboticsFau93] O. Faugeras. Three-dimensional computer vision: a geometric viewpoint, pp.215-221, 1955.

J. [. Gosselin, . [. Angeles, P. Gogu, A. Coiffet, C. Barraco et al., Singularity analysis of closed-loop kinematic chains, IEEE Transactions on Robotics and Automation IEEE International Conference on Robotics and Automation Conférence Internationale Francophone d'Automatique -CIFA Proceedings 9th Int. Technical Congress F.I.S.I.T.A Computer Vision and Pattern Recognition, Proceedings CVPRIIK + 00] Y. Ihara, T. Ishida, Y. Kakino, Z. Li, T. Matsushita, and M. Nakagawa. Kinematic calibration of a hexapod machine tool by using circular test, pp.281-290, 1962.
DOI : 10.1109/70.56660

Y. Koseki, T. Arai, K. Sugimoto, T. Takatuji, M. Goto et al., Visual servo control of a parallel manipulator for assembly tasks A motion control scheme in task oriented coordinates and its robustness for parallel wire driven systems Modélisation, identification et commande des robots. Hermès -Lavoisier, ISBN 2-7462-0003-1 Robust asymptotically stable visual servoing of planar robot A new geometric notation for open and closed-loop robots A high-speed parallel robot for scara motions, ` a Forts Débattements Angulaires Three-dimensional position control of a parallel micromanipulator using visual servoing A method for the solution of certain problems in least squares, IEEE International Conference on Robotics and Automation 6th Int. Symposium on Intelligent Robotic Systems, SIRS'98 Int. Conf. Advanced Robotics (ICAR'99) IEEE International Conference on Robotics and Automation, ICRA'04 Thèse de doctorat Microrobotics and Microassembly II, Proceedings of SPIELju99] L Ljung. System Identification: Theory for the user. PTR Prentice Hall, Upper Saddle RiverLow87] D. G. Lowe. Three-dimensional object recognition from single twodimensional imagesLVD98] JM. Lavest, M. Viala, and M. Dhome. Do we really need an accurate 204, pp.1340-1345, 1944.

M. , O. Ma, J. Angelesmar63, and ]. D. Marquardt, Direct kinematics and dynamics of a planar three-dof parallel manipulator [Mal98] E. Malis. ContributionàContributionà la modélisation etàetà la commande en asservissement visuel An algorithm for least-squares estimation of nonlinear parameters Rives. Intrinsics-free visual servoing with respect to straight lines, Proceedings of ECCV98 Proc. of ASME Design and Automation Conf Thèse de doctoratMar02] F. Marquet. ContributionàContributionà l'´ etude de l'apport de la redondance en robotiqueparalì ele Thèse de doctorat IEEE Int. Conf. on Intelligent Robots SystemsMCB99] E. Malis, F. Chaumette, and S. Boudet. 2 1/2 d visual servoing IEEE International Conference on Robotics and Automation, pp.158-174, 1963.

F. Marquet, O. Company, S. Krut, F. [. Pierrot, G. C. Motta et al., Enhancing parallel robots accuracy with redundant sensors Robot calibration using a 3d vision-based measurement system with a single camera Robotics and Computer-Integrated Manufacturing Robot control using 3d monocular pose estimation An algorithm for the forward kinematics of general 6 d.o.f parallel manipulators Closed-form resolution of the direct kinematics of parallel manipulators using extra sensors data, Proc. Int. Conf. Robotics and Automation Proceedings of the Workshop on New Trends in Image Based Robot Servoing, IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS'97 IEEE International Conference on Robotics and AutomationMer00] J.P. Merlet. Les robotsparalì eles. Collection Robotique, Editions Hermès, pp.4114-4119487, 1990.

]. J. Mer04, . [. Merlet, J. Martinet, . [. Gallice, J. Martinet et al., Position based visual servoing using a non-linear approach Vision based control law using 3d visual features Visual servoing using linear features for under-actuated rigid-body dynamics Explicit incorporation of 2d constraints in vision based control of robot manipulators Visp for visual servoing: a generic software platform with a wide class of robot control skills. IEEE Robotics and Automation Magazine, Special Issue on " Software Packages for Vision-Based Control of Motion, IEEE International Conference on Intelligent Robots and Sytems Proc. World Automation Congress, WAC'96, Robotics and Manufacturing Systems IEEE Int. Conf. on Intelligent Robots Systems The Sixth International Symposium on Experimental Robotics VI. [NCK + 05] V. Nabat, O. Company, S. Krut, M. Rodriguez, and F. Pierrot. Par4: Very high speed parallel robot for pick-and-place IEEE International Conference on Intelligent Robots and Systems,IROS'05, pp.221-236, 1996.

M. Nakagawa, T. Matsushita, S. Watanabe, Y. Kakino, Y. Ihara et al., The improvement of motion accuracy of hexapod type machine tools and its machining performance Iterative pose estimation using coplanar feature points Forward kinematic calibration method for parallel mechanism using pose data measured by a double ball bar system, Proc. of Japan US Sympo. on Factory Automation (JUSFA2002)PC99] F. Pierrot and O. Company. H4: A new family of 4-dof parallel robots IEEE International Conference on Advanced Intelligent Mechatronics , AIM'99, pp.979-982495, 1996.

W. [. Park and . Chung, Geometric integration on Euclidean group with application to articulated multibody systems, IEEE Transactions on Robotics, vol.21, issue.5, pp.850-863, 2005.
DOI : 10.1109/TRO.2005.852253

V. Parenti-castelli and R. Di-gregorio, Determination of the Actual Configuration of the General Stewart Platform Using Only One Additional Sensor, Journal of Mechanical Design, vol.121, issue.1, pp.21-2539, 1999.
DOI : 10.1115/1.2829423

T. Q. Phong, R. Horaud, A. Yassine, P. D. Taoplü65, ]. Andreff et al., Object pose from 2-d to 3-d point and line correspondences [Pie91] F. Pierrot. Robots pleinementparalì eles légers: Conception Modélisation et Commande On a new geometry of space Experimental evaluation of a vision-based measuring device for parallel machine-tool calibration, Thèse de doctorat Proceedings of the IEEE International Conference on Intelligent Robots and Systems, IROS'02, pp.225-243725, 1991.

P. Renaud, N. Andreff, P. Martinet, and G. Gogu, Kinematic calibration of parallel mechanisms: a novel approach using legs observation, IEEE Transactions on Robotics, vol.21, issue.4, pp.529-538, 2005.
DOI : 10.1109/TRO.2005.847606

URL : https://hal.archives-ouvertes.fr/hal-00272609

P. Renaud, N. Andreff, F. Marquet, and P. Martinet, Vision-based kinematic calibration of a H4 parallel mechanism, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), pp.1191-1196, 2003.
DOI : 10.1109/ROBOT.2003.1241754

P. Renaud, N. Andreff, F. Pierrot, P. [. Martinet, J. M. Rives et al., Visual servoing techniques applied to an underwater vehicle Etalonnage d'un système de vision embarqué Apport de la vision pour l'identification géométrique de mécanismesparalì eles A modified PID controller (piisigmabetad ) A parallel redundant manipulator: Speed-r-man and its control Algebraic Projective Geometry Robot Control: The Task Function approach Simplified kinematic calibration for a class of parallel mechanism, IEEE International Conference on Robotics and Automation IEEE International Conference on Robotics and Automation Thèse de doctorat Thèse de doctorat 4th International Symposium on Robotics and Manufacturing, ISRAMSte65] D. Stewart. A platform with six degrees of freedom UK Institution of Mechanical Engineers Proceedings IEEE International Conference on Robotics and Automation, pp.4116-4121, 1952.

F. [. Tahri and . Chaumette, De la simplification et la résolution du modèle géométrique direct des robotsparalì eles Application of moment invariants to visual servoing, Thèse de doctorat, Ecoles des Mines de Paris IEEE International Conference on Robotics and Automation, pp.4276-4281, 1995.

O. Tahri, Y. Mezouar, N. Andreff, and P. Martinet, Omnidirectional visual servoing of the gough-stewart platform, International Conference on Intelligent Robots and Systems, IROS'07, 2007.

B. Thuilot, P. Martinet, J. Cordesses, . Gallicetos05-]-r, and . Toscano, Position based visual servoing: keeping the object in the field of vision A simple robust PI/PID controller design via numerical optimization approach Advanced control strategy for the visual servoing scheme, IEEE International Conference on Robotics and Automation 6th International IFAC Symposium on Robot ControlTsa87] R.Y. Tsai. A versatile camera calibration technique for high accuracy 3d machine vision metrology using off-the-shelf tv cameras and 208, pp.1624-162981, 2000.

. Bibliographie-lenses-[-ttm95-]-l, M. Tancredi, J. Teillaud, . [. Visher, T. Wampler et al., Forward kinematics of a parallel manipulator with additional rotary sensors measuring the position of platform joints Improve the accuracy of parallel robot [Viv04] A. Vivas. ContributionàContributionà l'identification etàetà la commande des robotsparalì eles Calibration of robots having kinematic closed-loops using non-linear least squares estimator Kinematic analysis of a new parallel machine tool: The orthoglide On the accuracy of a stewart platform part i : The effect of manufacturing tolerances Relative endeffector control using cartesian position-based visual servoing Motion of an uncalibrated stereo rig : self-calibration and metric reconstruction Robust vision based 3d trajectory tracking using sliding mode control Kinematic calibration of a stewart platform using pose measurements obtained by a single theodolite, Thèse de doctorat World Congress in Mechanism and Machine Science , IFToMM 7th International Symposium on Advances in Robot Kinematics IEEE International Conference on Robotics and Automation, ICRA'93ZMP00] P. Zanne, G. Morel, and F. Plestan IEEE International Conference on Robotics and Automation, ICRA'00ZMY95] H. Zhuang, O. Masory, and J. Yan International Conference on Intelligent Robots and SystemsZN01] H. Zou and L. Notash. Discussions on the camera-aided calibration of parallel manipulators Proc. of CCToMM Symp. Mech, pp.323-344, 1987.

H. Zhung and Z. S. Roth, Camera-aided robot calibration ISBN-13: 978-0849394072, ZYM98] H. Zhung, J. Yan, and O. Masory. Calibration of stewart platform and other parallel manipulators by minimizing inverse kinematic residuals, 1996.