R. Xu, New Biomedical Poly(urethane urea)???Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.2, pp.337-339, 2000.
DOI : 10.1021/ma0013657

. Bharadwaj, Modeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.26, pp.9189-9192, 2001.
DOI : 10.1021/ma010780b

Y. Kojima, Mechanical properties of nylon 6-clay hybrid, Journal of Materials Research, vol.31, issue.05, pp.1185-1189, 1993.
DOI : 10.1016/0032-3861(65)90032-7

P. B. Messersmith and E. P. , Synthesis and barrier properties of poly(ϵcaprolactone )-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, issue.7, pp.33-1047, 1995.

. Yano, Synthesis and properties of polyimide???clay hybrid, Journal of Polymer Science Part A: Polymer Chemistry, vol.31, issue.10, pp.31-2493, 1993.
DOI : 10.1002/pola.1993.080311009

D. P. Vlasveld, Moisture absorption in polyamide-6 silicate nanocomposites and its influence on the mechanical properties, Polymer, vol.46, issue.26, pp.46-12567, 2005.
DOI : 10.1016/j.polymer.2005.10.096

E. P. Giannelis, Polymer Layered Silicate Nanocomposites, Advanced Materials, vol.2, issue.1, pp.29-35, 1996.
DOI : 10.1002/adma.19960080104

D. M. Lincoln, Secondary structure and elevated temperature crystallite morphology of nylon-6/layered silicate nanocomposites, Polymer, vol.42, issue.4, pp.1621-1631, 2001.
DOI : 10.1016/S0032-3861(00)00414-6

D. Homminga, Crystallization behavior of polymer/montmorillonite nanocomposites. Part II. Intercalated poly([epsilon]-caprolactone)/montmorillonite nanocomposites, Polymer, issue.5, pp.47-1620, 2006.

T. C. Li, Effect of clay addition on the morphology and thermal behavior of polyamide 6, Journal of Applied Polymer Science, vol.42, issue.2, pp.1191-1199, 2007.
DOI : 10.1002/app.25378

M. Hinojosa, Scaling properties of the fracture surfaces of a crystalline polymer, Polymer, issue.14, pp.45-4829, 2004.

. Murase, Structural characteristics and moisture sorption behavior of nylon-6/clay hybrid films, Journal of Polymer Science Part B: Polymer Physics, vol.44, issue.6, pp.40-479, 2002.
DOI : 10.1002/polb.10106

M. Debowska, J. D. , J. Rudzinska-girulska, J. Piglowski-pramoda, K. P. et al., Polyamide 6/Layered Silicate Nanocomposites. 37th Polish Seminar on Positron Annihilation Effect of moisture on the dynamic mechanical relaxation of polyamide-6/clay nanocomposites, Journal of Polymer Science Part B: Polymer Physics, vol.113, issue.1410, pp.1321-1329, 2004.

A. N. Wilkinson, Structure and Dynamic Mechanical Properties of Melt Intercalated Polyamide 6???Montmorillonite Nanocomposites, Macromolecular Materials and Engineering, vol.42, issue.2, pp.291-917, 2006.
DOI : 10.1002/mame.200600150

S. Xie, Effects of processing history and annealing on polymorphic structure of nylon-6/montmorillonite nanocomposites, Polymer, vol.46, issue.14, pp.46-5417, 2005.
DOI : 10.1016/j.polymer.2005.03.094

V. Miri, Crystallization Kinetics and Crystal Structure of Nylon6-Clay Nanocomposites: Combined Effects of Thermomechanical History, Clay Content, and Cooling Conditions, Macromolecules, vol.41, issue.23, pp.41-9234, 2008.
DOI : 10.1021/ma801804y

S. Venkataramani, Structure and Properties of Polyamide-6 & 6/66 Clay Nanocomposites, Journal of Macromolecular Science, Part A, vol.38, issue.21, pp.65-73, 2009.
DOI : 10.1080/10601320802515399

Y. P. Khanna, Overview of transition phenomenon in nylon 6, Macromolecules, vol.25, issue.12, pp.25-3298, 1992.
DOI : 10.1021/ma00038a043

A. Vermogen and . L. Olivier, Genèse des microstructures et conséquences sur les propriétés mécaniques dans les polymères semi-cristallins renforcés par des charges lamellaires Influence of alpha-ZrP fillers and process conditions on the morphology and the gas barrier properties of filled polyamide 6 films, High temperature behaviour of the crystalline phases in unfilled and clay-filled nylon 6 fibers. Polymer, pp.46-1734, 2006.

M. Paci, S. Filippi, and P. Magagnini, Nanostructure development in nylon 6-Cloisite?? 30B composites. Effects of the preparation conditions, European Polymer Journal, vol.46, issue.5, pp.838-853, 2010.
DOI : 10.1016/j.eurpolymj.2010.02.012

K. Varlot, Clay-reinforced polyamide: Preferential orientation of the montmorillonite sheets and the polyamide crystalline lamellae, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.12, pp.39-1360, 2001.
DOI : 10.1002/polb.1108

URL : https://hal.archives-ouvertes.fr/hal-00475349

B. Yalcin, D. Valladares, and M. Cakmak, Amplification effect of platelet type nanoparticles on the orientation behavior of injection molded nylon 6 composites, Polymer, vol.44, issue.22, pp.44-6913, 2003.
DOI : 10.1016/j.polymer.2003.07.010

I. Kelnar and J. K. , Shear flow effect on the crystalline forms in polyamide 6/montmorillonite nanocomposites, Journal of Applied Polymer Science, vol.100, issue.5, pp.3387-3393, 2007.
DOI : 10.1002/app.27021

S. M. Aharoni and A. Rodríguez, n-Nylons, their synthesis, structure and properties Crystalline properties of injection molded polyamide-6 and polyamide-6/montmorillonite nanocomposites, Applied Clay Science, vol.50, issue.1, pp.43-91, 1997.

E. Laredo, Water Absorption Effect on the Dynamic Properties of Nylon-6 by Dielectric Spectroscopy, Macromolecules, vol.36, issue.26, pp.9840-9850, 2003.
DOI : 10.1021/ma034954w

P. Avakian, R. R. Matheson, and H. W. Starkweather, Implications of dielectric response for the mechanism of changes in oxygen transport due to traces of moisture in amorphous nylons, Macromolecules, vol.24, issue.16, pp.24-4698, 1991.
DOI : 10.1021/ma00016a033

B. Frank, P. Frübing, and P. Pissis, Water sorption and thermally stimulated depolarization currents in nylon-6, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.11, pp.34-1853, 1996.
DOI : 10.1002/(SICI)1099-0488(199608)34:11<1853::AID-POLB2>3.0.CO;2-T

E. Laredo and M. C. Hernandez, Moisture effect on the low- and high-temperature dielectric relaxations in nylon-6, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.17, pp.35-2879, 1997.
DOI : 10.1002/(SICI)1099-0488(199712)35:17<2879::AID-POLB11>3.0.CO;2-4

H. Nuriel, The dielectric properties of nylon 6,6/aramid fibre microcomposites in the presence of transcrystallinity, Composites Part A: Applied Science and Manufacturing, vol.31, issue.1, pp.31-69, 2000.
DOI : 10.1016/S1359-835X(99)00050-0

K. A. Pathmanathan and G. P. , High-temperature dielectric relaxation in nylon 12 and the effects of annealing and absorbed water, Journal of the Chemical Society, Faraday Transactions, vol.91, issue.2, pp.337-341, 1995.
DOI : 10.1039/ft9959100337

Y. Lee, Accelerated ?? Relaxation Dynamics in the Exfoliated Nylon-11/Clay Nanocomposite Observed in the Melt and Semicrystalline State by Dielectric Spectroscopy, Macromolecules, vol.38, issue.9, pp.3828-3837, 2005.
DOI : 10.1021/ma048052m

G. Perrier and A. Bergeret, Polystyrene-glass bead composites: Maxwell-Wagner-sillars relaxations and percolation, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.9, pp.1349-1359, 1997.
DOI : 10.1002/(SICI)1099-0488(19970715)35:9<1349::AID-POLB5>3.0.CO;2-H

A. Okada and A. U. , Twenty Years of Polymer-Clay Nanocomposites, Macromolecular Materials and Engineering, issue.12, pp.291-1449, 2006.

V. E. Yudin, Effects of nanofiller morphology and aspect ratio on the rheomechanical properties of polyimide nanocomposites. eXPRESS Polymer Letters, pp.485-493

A. N. Wilkinson, Tensile properties of melt intercalated polyamide 6 - Montmorillonite nanocomposites Effect of organoclay structure on nylon 6 nanocomposite morphology and properties Nylon-6 Nanocomposites from Alkylammonium-Modified Clay:â?? The Role of Alkyl Tails on Exfoliation, Composites Science and Technology Polymer Macromolecules, vol.67, issue.645, pp.15-16, 2002.

K. Tamura, Layered silicate-polyamide-6 nanocomposites: Influence of silicate species on morphology and properties The american mineralogist, 1962. 47. 67 Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites, Journal of Polymer Science Part B: Polymer Physics Polymer, vol.66, issue.623, pp.47-583, 2001.

A. Clearfield and G. D. Smith, Crystallography and structure of .alpha.-zirconium bis(monohydrogen orthophosphate) monohydrate, Inorganic Chemistry, vol.8, issue.3, pp.431-436, 1969.
DOI : 10.1021/ic50073a005

J. M. Troup and A. Clearfield, Mechanism of ion exchange in zirconium phosphates. 20. Refinement of the crystal structure of .alpha.-zirconium phosphate, Inorganic Chemistry, vol.16, issue.12, pp.16-3311, 1977.
DOI : 10.1021/ic50178a065

G. Alberti, U. Costantino, and L. , Recent progress in the intercalation chemistry of layered [alpha]-zirconium phosphate and its derivatives, and future perspectives for their use in catalysis, Preparation of Exfoliated Epoxy/α-Zirconium Phosphate Nanocomposites Containing High Aspect Ratio Nanoplatelets. Chemistry of Materials, pp.19-1749, 1984.

J. Alongi and A. Frache, Flame retardancy properties of ??-zirconium phosphate based composites, Polymer Degradation and Stability, vol.95, issue.9, pp.1928-1933
DOI : 10.1016/j.polymdegradstab.2010.04.007

H. J. Sue, Epoxy Nanocomposites Based on the Synthetic α-Zirconium Phosphate Layer Structure Effect of nanoplatelet dispersion on mechanical behavior of polymer nanocomposites, Chemistry of Materials Journal of Polymer Science Part B: Polymer Physics, vol.16, issue.212, pp.242-249, 2003.

C. Blachier, Adsorption of polyamine on clay minerals, Journal of Colloid and Interface Science, vol.336, issue.2, pp.599-606, 2009.
DOI : 10.1016/j.jcis.2009.04.021

URL : https://hal.archives-ouvertes.fr/hal-00412520

F. Chavarria and D. R. Paul, Comparison of nanocomposites based on nylon 6 and nylon 66, Polymer, vol.45, issue.25, pp.45-8501, 2004.
DOI : 10.1016/j.polymer.2004.09.074

T. Lan, P. D. Kaviratna, and T. J. Pinnavaia, On the Nature of Polyimide-Clay Hybrid Composites, Chemistry of Materials, vol.6, issue.5, pp.573-575, 1994.
DOI : 10.1021/cm00041a002

E. Picard, Etude et modélisation du transport de petites molécules dans des nanocomposites a charges lamellaires -Optimisation des propriétés barrière Thèse, 2007.

C. Jin-hae, P. Dae-keun, and I. Jin, Polyimide nanocomposite with a hexadecylamine clay: Synthesis and characterization, Journal of Applied Polymer Science, vol.84, issue.12, pp.2294-2301, 2002.

U. Yano and O. , Synthesis and properties of polyimide-clay hybrid films, Journal of Polymer Science Part A: Polymer Chemistry, vol.35, issue.11, pp.35-2289, 1997.
DOI : 10.1002/(SICI)1099-0518(199708)35:11<2289::AID-POLA20>3.0.CO;2-9

Y. C. Wang, Polyamide/SDS???clay hybrid nanocomposite membrane application to water???ethanol mixture pervaporation separation, Journal of Membrane Science, vol.239, issue.2, pp.219-226, 2004.
DOI : 10.1016/j.memsci.2004.03.037

K. Yang and R. Ozisik, Effects of processing parameters on the preparation of nylon 6 nanocomposites, Polymer, vol.47, issue.8, pp.47-2849, 2006.
DOI : 10.1016/j.polymer.2006.02.043

E. Logakis, Structure-property relationships in polyamide 6/multi-walled carbon nanotubes nanocomposites, Journal of Polymer Science Part B: Polymer Physics, vol.99, issue.8, pp.47-764, 2009.
DOI : 10.1002/polb.21681

N. Hasegawa, Nylon 6/Na???montmorillonite nanocomposites prepared by compounding Nylon 6 with Na???montmorillonite slurry, Polymer, vol.44, issue.10, pp.44-2933, 2003.
DOI : 10.1016/S0032-3861(03)00215-5

J. Tung, Rheological and mechanical comparative study of in situ polymerized and melt-blended nylon 6 nanocomposites, Polymer, vol.46, issue.23, pp.46-10405, 2005.
DOI : 10.1016/j.polymer.2005.08.043

T. Lan, P. D. Kaviratna, and T. J. Pinnavaia, Mechanism of Clay Tactoid Exfoliation in Epoxy-Clay Nanocomposites, Chemistry of Materials, vol.7, issue.11, pp.2144-2150, 1995.
DOI : 10.1021/cm00059a023

S. S. Ray and M. Okamoto, Polymer/layered silicate nanocomposites: a review from preparation to processing, Progress in Polymer Science, issue.11, pp.28-1539, 2003.

P. C. Lebaron, Z. Wang, and T. J. Pinnavaia, Polymer-layered silicate nanocomposites: an overview, Applied Clay Science, vol.15, issue.1-2, pp.11-29, 1999.
DOI : 10.1016/S0169-1317(99)00017-4

D. Homminga, Influence of shear flow on the preparation of polymer layered silicate nanocomposites, Polymer, vol.46, issue.23, pp.9941-9954, 2005.
DOI : 10.1016/j.polymer.2005.07.059

W. S. Chow, Mechanical, morphological and rheological properties of polyamide 6/organo-montmorillonite nanocomposites. EXPRESS Polymer Letters, pp.77-83, 2007.

A. Usuki, Three-Dimensional Observation of Structure and Morphology in Nylon-6/Clay Nanocomposite, Nano Letters, vol.1, issue.5, pp.271-272, 2001.
DOI : 10.1021/nl010015a

. Yoon, Structure and property study of nylon-6/clay nanocomposite fiber, Polymer International, vol.39, issue.12, pp.2072-2078, 2004.
DOI : 10.1002/pi.1630

T. X. Liu, Morphology, thermal and mechanical behavior of polyamide 6/layered-silicate nanocomposites, Composites Science and Technology, vol.63, issue.3-4, pp.3-4
DOI : 10.1016/S0266-3538(02)00226-9

L. Shen, W. C. Tjiu, and T. Liu, Nanoindentation and morphological studies on injection-molded nylon-6 nanocomposites, Polymer, vol.46, issue.25, pp.46-11969, 2005.
DOI : 10.1016/j.polymer.2005.10.006

Y. Kojima, Novel preferred orientation in injection-molded nylon 6-clay hybrid, Journal of Polymer Science Part B: Polymer Physics, vol.33, issue.7, pp.33-1039, 1995.
DOI : 10.1002/polb.1995.090330707

M. Ercken, Study of Solvent Diffusion in Polymeric Materials Using Magnetic Resonance Imaging, Macromolecules, vol.28, issue.25, pp.8541-8547, 1995.
DOI : 10.1021/ma00129a012

P. Chandra and W. J. Koros, Sorption and transport of methanol in poly(ethylene terephthalate) Polymer, pp.236-244, 2009.

P. Chandra and W. J. Koros, Sorption of lower alcohols in poly(ethylene terephthalate) Polymer, pp.4241-4249, 2009.

A. Kishimoto, Diffusion Coefficients for Amorphous Polymer and Water Systems, Bulletin of the Chemical Society of Japan, vol.33, issue.7, p.988, 1960.
DOI : 10.1246/bcsj.33.988

H. Qu, Effect of crosslinking on sorption, diffusion and pervaporation of gasoline components in hydroxyethyl cellulose membranes, Chemical Engineering Journal, vol.157, issue.1, pp.60-66, 2010.
DOI : 10.1016/j.cej.2009.09.044

J. S. Vrentas, J. L. Duda, and W. J. Huang, Regions of Fickian diffusion in polymer-solvent systems, Macromolecules, vol.19, issue.6, pp.1718-1724, 1986.
DOI : 10.1021/ma00160a040

E. Sakai and M. Kawagoe, Behavior of absorbed water in elongated polyamide 6, Journal of Applied Polymer Science, vol.9, issue.3, pp.1272-1277
DOI : 10.1002/app.31274

K. Kruger and G. Sadowski, Fickian and Non-Fickian Sorption Kinetics of Toluene in Glassy Polystyrene, Macromolecules, vol.38, issue.20, pp.38-8408, 2005.
DOI : 10.1021/ma050353o

G. S. Park and J. Crank, Diffusion in polymers, 1968.

J. Crank, The Mathematics of Diffusion, Clarendon, 1975.

C. S. Brazel and N. A. Peppas, Mechanisms of solute and drug transport in relaxing, swellable, hydrophilic glassy polymers, Polymer, vol.40, issue.12, pp.3383-3398, 1999.
DOI : 10.1016/S0032-3861(98)00546-1

A. R. Berens and H. B. , Diffusion and relaxation in glassy polymer powders: 2. Separation of diffusion and relaxation parameters, Polymer, vol.19, issue.5, pp.489-496, 1978.
DOI : 10.1016/0032-3861(78)90269-0

E. Bagley and F. A. Long, Two-stage Sorption and Desorption of Organic Vapors in Cellulose Acetate1, Journal of the American Chemical Society, vol.2, issue.8, pp.77-2172, 1955.

S. N. Dhoot, Sorption and transport of linear alkane hydrocarbons in biaxially oriented polyethylene terephthalate, Journal of Polymer Science Part B: Polymer Physics, vol.64, issue.11, pp.39-1160, 2001.
DOI : 10.1002/polb.1092

C. C. Mcdowell, B. D. Freeman, and G. W. Mcneely, Acetone sorption and uptake kinetic in poly(ethylene terephthalate), Polymer, vol.40, issue.12, pp.40-3487, 1999.
DOI : 10.1016/S0032-3861(98)00403-0

C. C. Mcdowell, B. D. Freeman, and G. W. Mcneely, Interval kinetic gravimetric sorption of acetone in random copolymers of poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalate), Journal of Polymer Science Part B: Polymer Physics, vol.29, issue.21, pp.37-2973, 1999.
DOI : 10.1002/(SICI)1099-0488(19991101)37:21<2973::AID-POLB7>3.0.CO;2-M

A. C. Newns, The sorption and desorption kinetics of water in a regenerated cellulose, Transactions of the Faraday Society, vol.52, p.1533, 1956.
DOI : 10.1039/tf9565201533

R. Ramani and C. Ranganathaiah, Free-volume microprobe study of iodine diffusion in polymers, Polymer International, vol.25, issue.2, pp.237-248, 2001.
DOI : 10.1002/1097-0126(200102)50:2<237::AID-PI613>3.0.CO;2-Q

F. A. Long and D. Richman, Concentration Gradients for Diffusion of Vapors in Glassy Polymers and their Relation to Time Dependent Diffusion Phenomena1, Journal of the American Chemical Society, vol.2, issue.823, pp.513-519, 1960.

G. Choudalakis and A. D. Gotsis, Permeability of polymer/clay nanocomposites: A review, European Polymer Journal, vol.45, issue.4, pp.967-984, 2009.
DOI : 10.1016/j.eurpolymj.2009.01.027

. Kloppfer, Transport Properties of Gases in Polymers: Bibliographic Review. Oil & Gas Science and Technology, pp.223-244, 2001.

D. R. Paul, Gas Sorption and Transport in Glassy-Polymers. Berichte Der Bunsen- Gesellschaft-Physical Chemistry Chemical Physics, pp.294-302, 1979.

S. Basu, U. S. Shivhare, and A. S. Mujumdar, Models for sorption isotherms for foods: A review. Drying Technology, pp.24-917, 2006.

N. Dolmaire, Water transport properties of thermoplastic polyurethane films, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.3, pp.473-492, 2004.
DOI : 10.1002/polb.10716

URL : https://hal.archives-ouvertes.fr/hal-00457341

L. T. Lim, I. J. Britt, and T. M. , Sorption and transport of water vapor in nylon 6,6 film, Journal of Applied Polymer Science, vol.16, issue.2, pp.197-206, 1999.
DOI : 10.1002/(SICI)1097-4628(19990110)71:2<197::AID-APP2>3.0.CO;2-J

D. Bhanushali, Performance of solvent-resistant membranes for non-aqueous systems: solvent permeation results and modeling, Journal of Membrane Science, vol.189, issue.1, pp.1-21, 2001.
DOI : 10.1016/S0376-7388(01)00356-8

J. Zhen and T. , Sorption studies of volatile organic compounds in a divinyl-terminated poly(dimethylsiloxane)-oligo polymer, Journal of Applied Polymer Science, vol.35, issue.2, pp.920-927, 2004.
DOI : 10.1002/app.13692

P. Laurent, Sorption and diffusion of solvent vapours in poly(vinylalcohol) membranes of different crystallinity degrees, Polymer International, vol.39, issue.3, pp.251-260, 1996.

F. Sabzi, F. Ayatollahi, and A. Boushehri, Sorption mechanism in organic solutions of uncharged polymers, Journal of Applied Polymer Science, vol.36, issue.4, pp.1867-1875, 2010.
DOI : 10.1002/app.32102

L. Perrin, Experimental Studies and Modelling of Sorption and Diffusion of Water and Alcohols in Cellulose Acetate, Polymer International, vol.42, issue.1, pp.9-16, 1997.
DOI : 10.1002/(SICI)1097-0126(199701)42:1<9::AID-PI637>3.0.CO;2-A

R. K. Koningsveld and L. A. , Liquid-liquid phase separation in multicomponent polymer systems X. Concentration dependence of the pair-interaction parameter in the system cyclohexane-polystyrene Macromolecules, p.637, 1971.

B. Park, Thermodynamic modeling of the sorption of organic chemicals in thermoplastics and elastomers, Journal of Applied Polymer Science, vol.47, issue.5, pp.771-780, 1993.
DOI : 10.1002/app.1993.070470503

A. Jonquières, Modelling of vapour sorption in polar materials: Comparison of Flory???Huggins and related models with the ENSIC mechanistic approach, Journal of Membrane Science, vol.147, issue.1, pp.59-71, 1998.
DOI : 10.1016/S0376-7388(98)00111-2

E. Favre, Sorption of organic solvents into dense silicone membranes. Part 2.???Development of a new approach based on a clustering hypothesis for associated solvents, J. Chem. Soc., Faraday Trans., vol.1, issue.4, pp.89-4347, 1993.
DOI : 10.1039/FT9938904347

E. Favre, The engaged species induced clustering (ENSIC) model: a unified mechanistic approach of sorption phenomena in polymers, Journal of Membrane Science, vol.117, issue.1-2, pp.227-236, 1996.
DOI : 10.1016/0376-7388(96)00060-9

H. Feng, Modeling of vapor sorption in glassy polymers using a new dual mode sorption model based on multilayer sorption theory, Polymer, vol.48, issue.10, pp.48-2988, 2007.
DOI : 10.1016/j.polymer.2006.10.050

H. Feng, Prediction of infinite dilution solvent activity coefficient in rubbery polymer solutions using Engaged Species Induced Clustering (ENSIC) model, Journal of Polymer Science Part B: Polymer Physics, issue.12, pp.44-1668, 2006.

A. Elberaïchi, A. Daro, and C. David, Water vapour transport in polyethylene oxide/polymethyl methacrylate blends, European Polymer Journal, vol.35, issue.7, pp.1217-1228, 1999.
DOI : 10.1016/S0014-3057(98)00212-2

M. Modesti, Mathematical model and experimental validation of water cluster influence upon vapour permeation through hydrophilic dense membrane, Journal of Membrane Science, vol.229, issue.1-2, pp.211-223, 2004.
DOI : 10.1016/j.memsci.2003.10.030

Z. Zhang, I. J. Britt, and M. A. Tung, Water Absorption in EVOH Films and Its Influence on Glass Transition Temperature, pp.691-699, 1999.

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023

D. Boer, The Dynamical Character of Adsorption, 1968.

. Guggenheim, Applications of Statistical Mechanics, p.186, 1966.

B. H. Zimm and J. L. Lundberg, Sorption of Vapors by High Polymers, The Journal of Physical Chemistry, vol.60, issue.4, pp.425-428, 1956.
DOI : 10.1021/j150538a010

S. Marais, Permeametric and microgravimetric studies of sorption and diffusion of water vapor in an unsaturated polyester, Polymer, vol.41, issue.7, pp.41-2667, 2000.
DOI : 10.1016/S0032-3861(99)00434-6

D. 'aniello and C. , Influence of the crystallinity on the transport properties of isotactic polypropylene, Polymer, issue.7, pp.41-2515, 2000.

L. E. Nielsen, Models for the Permeability of Filled Polymer Systems, Journal of Macromolecular Science: Part A - Chemistry, vol.3, issue.5, pp.929-942, 1967.
DOI : 10.1002/app.1964.070080337

K. E. Strawhecker and E. Manias, Montmorillonite Nanocomposites, Chemistry of Materials, vol.12, issue.10, pp.12-2943, 2000.
DOI : 10.1021/cm000506g

M. Hedenqvist and U. W. Gedde, Diffusion of small-molecule penetrants in semicrystalline polymers, Progress in Polymer Science, pp.299-333, 1996.
DOI : 10.1016/0079-6700(95)00022-4

N. S. Murthy and D. T. Grubb, Deformation of lamellar structures: Simultaneous small- and wide-angle X-ray scattering studies of polyamide-6, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.8, pp.40-691, 2002.
DOI : 10.1002/polb.10128

D. J. Sekelik, E. V. Stepanov, and S. Nazarenko, Oxygen barrier properties of crystallized and talc-filled poly(ethylene terephthalate), Journal of Polymer Science Part B: Polymer Physics, vol.12, issue.8, pp.847-857, 1998.
DOI : 10.1002/(SICI)1099-0488(19990415)37:8<847::AID-POLB10>3.0.CO;2-3

Y. S. Hu, Oxygen Transport and Free Volume in Cold-Crystallized and Melt-Crystallized Poly(ethylene naphthalate), Macromolecules, vol.35, issue.19, pp.7326-7337, 2002.
DOI : 10.1021/ma0205156

A. Juhyeon, C. Wook-jin, and P. Ingo, Polysulfone/silica nanoparticle mixed-matrix membranes for gas separation, Journal of membrane science, pp.314-123, 2008.

Y. S. Hu, Structural Model for Oxygen Permeability of a Liquid Crystalline Polymer, Macromolecules, vol.36, issue.10, pp.3606-3615, 2003.
DOI : 10.1021/ma0300746

M. Debowska, Influence of morphology on ortho-positronium annihilation characteristics in polyamide 6. Radiation Physics and Chemistry, pp.325-329, 2007.

A. Sorrentino, M. Tortora, and V. Viittoria, Diffusion behavior in polymer-clay nanocomposites, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.2, pp.265-274, 2005.
DOI : 10.1002/polb.20684

R. Waché, Formulation et caractérisation de polyéthylènes chargés avec des argiles - Propriétés barrière des nanocomposites obtenus, Thèse -Université de Bretagne Occidentale -France, 2004.

B. Alexandre, Transport Mechanisms of Small Molecules through Polyamide 12/Montmorillonite Nanocomposites, The Journal of Physical Chemistry B, vol.114, issue.27, pp.8827-8837, 2010.
DOI : 10.1021/jp911666b

URL : https://hal.archives-ouvertes.fr/hal-00714711

H. Y. Low, T. X. Liu, and W. W. Loh, Moisture sorption and permeation in polyamide 6/clay nanocomposite films, Polymer International, vol.11, issue.12, pp.53-1973, 2004.
DOI : 10.1002/pi.1607

M. Fukuda, Fundamental Studies on the Interactions between Moisture and Textiles V. FT-IR Study on the Moisture Sorption Isotherm of Nylon 6, Polymer Journal, vol.34, issue.7, pp.785-804, 1987.
DOI : 10.1021/ja00779a046

S. Eceolaza, Barrier property enhancement of polyamide 6 by blending with a polyhydroxyamino-ether resin, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.16, pp.47-1625, 2009.
DOI : 10.1002/polb.21764

R. Xu, New Biomedical Poly(urethane urea)???Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.2, pp.337-339, 2000.
DOI : 10.1021/ma0013657

. Bharadwaj, Modeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.26, pp.9189-9192, 2001.
DOI : 10.1021/ma010780b

Y. Kojima, Mechanical properties of nylon 6-clay hybrid, Journal of Materials Research, vol.31, issue.05, pp.1185-1189, 1993.
DOI : 10.1016/0032-3861(65)90032-7

P. B. Messersmith and E. P. , Synthesis and barrier properties of poly(&epsiv;caprolactone )-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, issue.7, pp.33-1047, 1995.

. Yano, Synthesis and properties of polyimide???clay hybrid, Journal of Polymer Science Part A: Polymer Chemistry, vol.31, issue.10, pp.31-2493, 1993.
DOI : 10.1002/pola.1993.080311009

D. P. Vlasveld, Moisture absorption in polyamide-6 silicate nanocomposites and its influence on the mechanical properties, Polymer, vol.46, issue.26, pp.46-12567, 2005.
DOI : 10.1016/j.polymer.2005.10.096

I. Kelnar, J. Kratochvíl, and J. Mikescaronová, Shear flow effect on the crystalline forms in polyamide 6/montmorillonite nanocomposites, Journal of Applied Polymer Science, vol.100, issue.5, pp.3387-3393, 2007.
DOI : 10.1002/app.27021

V. Miri, Crystallization Kinetics and Crystal Structure of Nylon6-Clay Nanocomposites: Combined Effects of Thermomechanical History, Clay Content, and Cooling Conditions, Macromolecules, vol.41, issue.23, pp.41-9234, 2008.
DOI : 10.1021/ma801804y

T. D. Fornes and D. R. Paul, Crystallization behavior of nylon 6 nanocomposites, Polymer, vol.44, issue.14, pp.3945-3961, 2003.
DOI : 10.1016/S0032-3861(03)00344-6

L. Olivier, Influence of alpha-ZrP fillers and process conditions on the morphology and the gas barrier properties of filled polyamide 6 films, Journal of Polymer Science Part B: Polymer Physics, issue.16, pp.46-1734, 2008.

X. Liu and Q. W. , Investigation on Unusual Crystallization Behavior in Polyamide 6/Montmorillonite Nanocomposites, Macromolecular Materials and Engineering, vol.287, issue.8, pp.287-515, 2002.
DOI : 10.1002/1439-2054(20020801)287:8<515::AID-MAME515>3.0.CO;2-B

S. Xie, Effects of processing history and annealing on polymorphic structure of nylon-6/montmorillonite nanocomposites, Polymer, vol.46, issue.14, pp.46-5417, 2005.
DOI : 10.1016/j.polymer.2005.03.094

L. E. Nielsen, Models for the Permeability of Filled Polymer Systems, Journal of Macromolecular Science: Part A - Chemistry, vol.3, issue.5, pp.929-942, 1967.
DOI : 10.1002/app.1964.070080337

T. Jiang, Study on solvent permeation resistance properties of nylon6/clay nanocomposite, European Polymer Journal, vol.41, issue.3, pp.459-466, 2005.
DOI : 10.1016/j.eurpolymj.2004.10.024

A. N. Wilkinson, Structure and Dynamic Mechanical Properties of Melt Intercalated Polyamide 6???Montmorillonite Nanocomposites, Macromolecular Materials and Engineering High temperature behaviour of the crystalline phases in unfilled and clay-filled nylon 6 fibers. Polymer, pp.917-928, 2006.
DOI : 10.1002/mame.200600150

. Yoon, Structure and property study of nylon-6/clay nanocomposite fiber, Polymer International, vol.39, issue.12, pp.2072-2078, 2004.
DOI : 10.1002/pi.1630

J. Tung, Rheological and mechanical comparative study of in situ polymerized and melt-blended nylon 6 nanocomposites, Polymer, vol.46, issue.23, pp.46-10405, 2005.
DOI : 10.1016/j.polymer.2005.08.043

E. Picard, J. F. Gerard, and E. , Water transport properties of polyamide 6 based nanocomposites prepared by melt blending: On the importance of the clay IV.1, p.210

L. Systèmes and P. , 230 IV.1.3. a), IV.1.3. Comportement en présence d'eau, p.232

M. De, P. Systèmes, and P. Systèmes, 235 IV.2.1. a), IV.2.1. Analyses des isothermes de sorption de vapeur d'éthanol pour les matériaux références et les nanocomposites à base, p.246

R. Xu, New Biomedical Poly(urethane urea)???Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.2, pp.337-339, 2000.
DOI : 10.1021/ma0013657

. Bharadwaj, Modeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites, Macromolecules, vol.34, issue.26, pp.9189-9192, 2001.
DOI : 10.1021/ma010780b

Y. Kojima, Mechanical properties of nylon 6-clay hybrid, Journal of Materials Research, vol.31, issue.05, pp.1185-1189, 1993.
DOI : 10.1016/0032-3861(65)90032-7

P. B. Messersmith and E. P. , Synthesis and barrier properties of poly(&epsiv;caprolactone )-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, issue.7, pp.33-1047, 1995.

. Yano, Synthesis and properties of polyimide???clay hybrid, Journal of Polymer Science Part A: Polymer Chemistry, vol.31, issue.10, pp.31-2493, 1993.
DOI : 10.1002/pola.1993.080311009

D. P. Vlasveld, Moisture absorption in polyamide-6 silicate nanocomposites and its influence on the mechanical properties, Polymer, vol.46, issue.26, pp.46-12567, 2005.
DOI : 10.1016/j.polymer.2005.10.096

E. P. Giannelis, Polymer Layered Silicate Nanocomposites, Advanced Materials, vol.2, issue.1, pp.29-35, 1996.
DOI : 10.1002/adma.19960080104

L. Olivier, Influence of alpha-ZrP fillers and process conditions on the morphology and the gas barrier properties of filled polyamide 6 films, Journal of Polymer Science Part B: Polymer Physics, issue.16, pp.46-1734, 2008.

T. Jiang, Study on solvent permeation resistance properties of nylon6/clay nanocomposite, European Polymer Journal, vol.41, issue.3, pp.459-466, 2005.
DOI : 10.1016/j.eurpolymj.2004.10.024

P. Laurent, Sorption and diffusion of solvent vapours in poly(vinylalcohol) membranes of different crystallinity degrees Polymer International Fundamental-Studies on the Interactions between Moisture and Textiles-V Ft-Ir Study on the Moisture Sorption Isotherm of Nylon-6 Barrier property enhancement of polyamide 6 by blending with a polyhydroxyamino-ether resin, Polymer Journal Journal of Polymer Science Part B: Polymer Physics, vol.39, issue.1216, pp.251-260, 1987.

. Murase, Structural characteristics and moisture sorption behavior of nylon-6/clay hybrid films, Journal of Polymer Science Part B: Polymer Physics, vol.44, issue.6, pp.40-479, 2002.
DOI : 10.1002/polb.10106

E. Picard, J. F. Gerard, and E. Espuche, Water transport properties of polyamide 6 based nanocomposites prepared by melt blending: On the importance of the clay dispersion state on the water transport properties at high water activity, Journal of Membrane Science, vol.313, issue.1-2, pp.284-295, 2008.
DOI : 10.1016/j.memsci.2008.01.011

URL : https://hal.archives-ouvertes.fr/hal-00376859

E. Picard, Etude et modélisation du transport de petites molécules dans des nanocomposites a charges lamellaires -Optimisation des propriétés barrière Thèse, 2007.

P. J. Flory and E. Favre, Sorption of Organic-Solvents into Dense Silicone Membranes .2. Development of a New Approach Based on a Clustering Hypothesis for Associated Solvents, Journal of the Chemical Society-Faraday Transactions, issue.1824, pp.89-4347, 1953.

E. Favre, The engaged species induced clustering (ENSIC) model: a unified mechanistic approach of sorption phenomena in polymers, Journal of Membrane Science, vol.117, issue.1-2, pp.227-236, 1996.
DOI : 10.1016/0376-7388(96)00060-9

D. Boer, The Dynamical Character of Adsorption, 1968.

. Guggenheim, Applications of Statistical Mechanics, p.186, 1966.

L. Perrin, Experimental Studies and Modelling of Sorption and Diffusion of Water and Alcohols in Cellulose Acetate, Polymer International, vol.42, issue.1, pp.9-16, 1997.
DOI : 10.1002/(SICI)1097-0126(199701)42:1<9::AID-PI637>3.0.CO;2-A

S. S. Despond, E. Espuche, and A. Domard, Water sorption and permeation in chitosan films: Relation between gas permeability and relative humidity, Journal of Polymer Science Part B: Polymer Physics, vol.37, issue.24, pp.3114-3127, 2001.
DOI : 10.1002/polb.10064

E. Sakai and M. Kawagoe, Behavior of absorbed water in elongated polyamide 6, Journal of Applied Polymer Science, vol.9, issue.3, pp.1272-1277
DOI : 10.1002/app.31274

K. N. Abacha, M, Diffusion behavior of water in polyamide 6 organoclay nanocomposites. eXPRESS Polymer Letters, pp.245-255, 2009.

E. Bagley, F. A. Long-long, F. A. , and D. Richman, Two-stage Sorption and Desorption of Organic Vapors in Cellulose Acetate1,2 Concentration Gradients for Diffusion of Vapors in Glassy Polymers and their Relation to Time Dependent Diffusion Phenomena1 The sorption and desorption kinetics of water in a regenerated cellulose, 1533. 31. E. Ivanova and M. Karsheva, Ethanol vapours adsorption by natural clynoptilolite, pp.77-2172, 1955.

R. Ramani and C. Ranganathaiah, Free-volume microprobe study of iodine diffusion in polymers, Polymer International, vol.25, issue.2, pp.237-248, 1978.
DOI : 10.1002/1097-0126(200102)50:2<237::AID-PI613>3.0.CO;2-Q

C. C. Mcdowell, B. D. Freeman, and G. W. Mcneely, Acetone sorption and uptake kinetic in poly(ethylene terephthalate) Polymer, Solubility in polymers. (Encyclopedia of Polymer Technology, 2nd. Ed.), pp.3487-3499, 1999.

D. W. Van-krevelen, Properties of Polymers: their estimation and correlation with chemical structure, 1976.

L. A. Utracki and R. Simha, Statistical thermodynamics predictions of the solubility parameter, Polymer International, vol.53, issue.3, pp.279-286, 2004.
DOI : 10.1002/pi.1365

M. Debowska, Influence of morphology on ortho-positronium annihilation characteristics in polyamide 6. Radiation Physics and Chemistry, pp.325-329, 2007.

. L. Olivier, Influence of alpha-ZrP fillers and process conditions on the morphology and the gas barrier properties of filled polyamide 6 films, Journal of Polymer Science Part B: Polymer Physics, issue.16, pp.46-1734, 2008.