. Grâce-À-cette-Étude, on a pu valider notre modélisation de la rupture hors @ plan et approfondirlacompréhensiondecetyped'endommagement

. Apluslongterme, InstitutP'dansledomaine des couplages multiphysiques pour introduire d'autres mécanismes dans le potentiel thermodynamique comme, par exemple, des variables traduisant la thermo ? oxydation

. Ilestclairquedanslemodèle1, endommagementmatricielestconcentréàproximité des arrêts des plis, précisément où les fibres vont commencer à rompre. Cette rupture matricielleprovoqueraunesurchargequivafavoriserencorepluslarupturedesfibresdans cettezoneetdonc

. Aveccetteétude, intérêtd'utiliserunmodèled'endommagementfinpour pouvoir discerner ces deux modes d'éclatement et donc

F. Laurin, Introduction générale sur les matériaux composites, Colloque Aussois MECAMAT, p.2011

P. Krawczak, Réservoirs haute pression en composites, pp.1-10, 1990.

Y. Zhang, Z. Xia, and F. Ellyin, Two-scale analysis of a filament-wound cylindrical structure and application of periodic boundary conditions, International Journal of Solids and Structures, vol.45, issue.20, pp.5322-5358, 2008.
DOI : 10.1016/j.ijsolstr.2008.05.026

]. P. Pp, H. Bersee, and A. Beukers, Residual stresses in thermoplastic composites - A study of the literature -Part I: Formation of residual stresses, Composites Part A: Applied Science and Manufacturing, vol.37, issue.6, pp.1847-1857, 2006.

E. Gamstedt and B. Sjögren, Micromechanisms in tension-compression fatigue of composite laminates containing transverse plies, Composites Science and Technology, vol.59, issue.2, pp.167-78, 1999.
DOI : 10.1016/S0266-3538(98)00061-X

M. Gentz, D. Armentrout, P. Rupnowski, L. Kumosa, E. Shin et al., In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites, Composites Science and Technology, vol.64, issue.2, pp.203-223, 2004.
DOI : 10.1016/S0266-3538(03)00260-4

P. Manders, T. Chou, R. Jones, and J. Rock, Statistical analysis of multiple fracture in 0º/90º/0º glass?fiber/epoxy?resin laminates, Journal of Material Sciences, vol.8, pp.352-62, 1983.

A. Parvisi and J. Bailey, On multiple transverse cracking in glass fibre epoxy cross-ply laminates, Journal of Materials Science, vol.12, issue.10, pp.2131-2137, 1978.
DOI : 10.1007/BF00541666

A. Highsmith and K. Reifsnider, Stiffness-Reduction Mechanisms in Composite Laminates, Philadelphia: ASTM STP, 1982.
DOI : 10.1520/STP34323S

M. Lafarie-frenot, C. Henaff-gardin, and D. Gamby, Matrix cracking induced by cyclic ply stresses in composite laminates, Composites Science and Technology, vol.61, issue.15, pp.2327-2363, 2001.
DOI : 10.1016/S0266-3538(01)00125-7

. Lafarie-frenot and . Mc, Damage mechanisms induced by cyclic ply-stresses in carbon???epoxy laminates: Environmental effects, International Journal of Fatigue, vol.28, issue.10, pp.1202-1218, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.014

D. Vu and M. Lafarie-frenot, The effect of thermo-oxidation on matrix cracking of cross-ply [0/90]S composite laminates, Composites Part A: Applied Science and Manufacturing, vol.44, pp.1-10, 2011.
DOI : 10.1016/j.compositesa.2012.08.013

M. Gigliotti and D. Vu, Local degradation and damage induced by thermo oxydation in carbo-epoxy composite materials, ECCM15, p.2012

K. Garrett and J. Bailey, Multiple transverse fracture in 90? cross-ply laminates of a glass fibre-reinforced polyester, Journal of Composite Materials, vol.18, pp.339-56, 1977.

L. Boniface, P. Smith, M. Bader, and A. Rezaifard, Transverse Ply Cracking in Cross-Ply CFRP Laminates???Initiation or Propagation Controlled?, Journal of Composite Materials, vol.18, issue.11, pp.1080-112, 1997.
DOI : 10.1177/002199839703101102

Z. Bâzant, Scaling of Structural Strength. London: Hermes Penton Science, 2002.

C. Huchette, Sur la complémentarieté des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, 2005.

M. Bertin and F. Touchard, Experimental study of the stacking sequence effect on polymer/composite multi-layers submitted to thermomechanical cyclic loadings, International Journal of Hydrogen Energy, vol.35, issue.20, pp.11397-404, 2010.
DOI : 10.1016/j.ijhydene.2010.07.018

S. Ogihara and N. Takeda, Interaction between transverse cracks and delamination during damage progress in CFRP cross-ply laminates, Composites Science and Technology, vol.54, issue.4, pp.395-404, 1995.
DOI : 10.1016/0266-3538(95)00084-4

E. Gamstedt and B. Sjören, An experimental investigation of the sequence effect in block amplitude loading of cross-ply composite laminates, International Journal of Fatigue, vol.24, issue.2-4, pp.437-483, 2002.
DOI : 10.1016/S0142-1123(01)00099-8

T. Okabe, M. Nishikawa, and N. Takeda, Numerical modeling of progressive damage in fiber reinforced plastic cross-ply laminates, Composites Science and Technology, vol.68, issue.10-11, pp.2282-2289, 2008.
DOI : 10.1016/j.compscitech.2008.04.021

F. Crossman and A. Wang, The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates, Damage in composite materials, pp.118-139, 1982.
DOI : 10.1520/STP34324S

O. Brien and T. , Characterization of delamination onset and growth in a composite laminate, Damage in composite materials, pp.140-67, 1982.

P. Ladevèze, D. Marsal, and G. Lubineau, On the micro-and mesomodeling of the interfaces between laminate plies

R. Jamison, K. Schulte, K. Reifsnider, and W. Stinchcomb, Characterization and analysis of damage mechanisms in tension-tension fatigue of graphite/epoxyde laminates, Effects of defects in composites materials, pp.21-55, 1984.

S. Liu, Z. Kutlu, and F. Chang, Matrix cracking and delamination in laminated composite beams subjected to a transverse concentrated line load, Journal of Composite Materials, vol.27, pp.436-470, 1993.

F. Laurin, A. Mavel, P. Nuñez, and A. E. , Influence de la fissuration transverse sur l ' amorçage du délaminage , application aux cornières composites, pp.2013-2014

L. Corre and J. , Analyse du développement de la fissuration transverse et du délaminage dabs les stratifiés croisés, Thèse Université du Maine, 1999.

J. Berthelot, E. Mahi, A. , L. Corre, and J. , Development of transverse cracking in cross-ply laminates during fatigue tests, Composites Science and Technology, vol.61, issue.12, pp.1711-1721, 2001.
DOI : 10.1016/S0266-3538(01)00068-9

E. Abisset and F. Daghia, On the intra/interlaminar coupling of laminated composites, ECCM15, pp.2012-2036

F. Laurin, N. Carrere, C. Huchette, and J. Maire, A multiscale hybrid damage and failure approach for strength predictions of composite structures, Journal of Composite Materials, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00745629

P. Maimí, P. Camanho, J. Mayugo, and C. Dávila, A Thermodynamically Consistent Damage Model for Advanced Composites, Nasa Report, 2006.

P. Maimí, P. Camanho, J. Mayugo, and A. Turon, Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination, Mechanics of Materials, vol.43, issue.4, pp.169-85, 2011.
DOI : 10.1016/j.mechmat.2010.12.003

P. Maimí, P. Camanho, J. A. Mayugo, and C. Dávila, A continuum damage model for composite laminates: Part I ??? Constitutive model, Mechanics of Materials, vol.39, issue.10, pp.897-908, 2007.
DOI : 10.1016/j.mechmat.2007.03.005

P. Maimí, P. Camanho, J. A. Mayugo, and C. Dávila, A continuum damage model for composite laminates: Part II ??? Computational implementation and validation, Mechanics of Materials, vol.39, issue.10, pp.909-928, 2007.
DOI : 10.1016/j.mechmat.2007.03.006

D. Eitzen and H. Wadley, Acoustic Emission: Establishing the Fundamentals, Journal of Research of the National Bureau of Standards, vol.89, issue.1, pp.75-100, 1984.
DOI : 10.6028/jres.089.008

F. Montheillet and F. Moussy, Méthodes d'observation et de mesure de l'endommagement, 1986.

Y. Lu and M. Hirohashi, Analysis of interfacial shear strength of SiCAl composite by acoustic emission method, Scripta Materialia, vol.38, issue.2, pp.273-278, 1998.
DOI : 10.1016/S1359-6462(97)00429-6

J. Singh, P. Mukhopadhyay, C. Jayakumar, T. Mannan, S. Bladev et al., Understanding fatigue crack propagation in AISI 316 (N) weld using elber's crack closure concept: Experimental results from GC -MOD and acoustic emission techniques, International Journal of Fatigue, vol.29, pp.2170-2179, 2007.

G. Neighbour and B. Mcenaney, An investigation of acoustic emission from an irradiated nuclear graphite, Journal of Nuclear Materials, vol.223, issue.3, pp.305-316, 1995.
DOI : 10.1016/0022-3115(95)00024-0

A. Papargyris, R. Cooke, S. Papargyri, and A. Botis, The acoustic behaviour of bricks in relation to their mechanical behaviour, Construction and Building Materials, vol.15, issue.7, pp.361-369, 2001.
DOI : 10.1016/S0950-0618(01)00007-1

J. Scholey, P. Wilcox, M. Wisnom, and M. Friswell, Quantitative experimental measurements of matrix cracking and delamination using acoustic emission, Composites Part A: Applied Science and Manufacturing, vol.41, issue.5, pp.612-635, 2010.
DOI : 10.1016/j.compositesa.2010.01.008

A. Caladro, C. Esposito, A. Lizza, D. Amore, A. Nicolaist et al., An acoustic emission characterization of the failure modes in polymer -composite materials, Composite Science and Technology, vol.58, pp.1923-1928, 1997.

T. Uenoya, Acoustic emission and the fiber/matrix interface failure progress and strength in glass fiber/epoxy laminates, 10th ICCM, pp.581-588, 1995.

T. Uenoya, Acoustic emission analysis of interfacial fracture of laminated fabric polymer matrix composite, Journal of Acoustic Emission, vol.13, pp.95-102, 1995.

N. Godin, S. Huguet, and R. Gaertner, Influence of hydrolytic ageing on the acoustic emission signatures of damage mechanisms occurring during tensile tests on a polyester composite: Application of a Kohonen???s map, Composite Structures, vol.72, issue.1, pp.79-85, 2006.
DOI : 10.1016/j.compstruct.2004.10.018

S. Momon, N. Godin, P. Reynaud, R. Mili, M. Fantozzi et al., Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature, Composites Part A: Applied Science and Manufacturing, vol.43, issue.2, pp.254-60, 2012.
DOI : 10.1016/j.compositesa.2011.10.016

M. Bertin, Fatigue thermomécanique de multicouches polymère/composite, PhD ENSMA, 2011.

M. Wisnom and S. Hallett, The role of delamination in strength, failure mechanism and hole size effect in open hole tensile tests on quasi-isotropic laminates, Composites Part A: Applied Science and Manufacturing, vol.40, issue.4, pp.335-377, 2009.
DOI : 10.1016/j.compositesa.2008.12.013

S. Hallett, B. Green, W. Jiang, and M. Wisnom, An experimental and numerical investigation into the damage mechanisms in notched composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.5, pp.613-637, 2009.
DOI : 10.1016/j.compositesa.2009.02.021

M. Sutton, W. Wolters, W. Peters, W. Ranson, and S. Mcneill, Determination of displacements using an improved digital correlation method, Image and Vision Computing, vol.1, issue.3, pp.133-139, 1983.
DOI : 10.1016/0262-8856(83)90064-1

C. Bonnafous, F. Touchard, L. Chocinski-arnault, and C. Dever, Caractérisation expérimentale de l'interface fil/matrice dans les composites chanvre/époxy Experimental characterisation of yarn/matrix interface in hemp/epoxy composites, JNC, vol.17, pp.1-10, 2011.

R. Pierron and S. Wisnom, Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method, Experimental Mechanics, pp.509-545, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01064631

J. Kim, F. Pierron, M. Wisnom, and A. S. , Local stiffness reduction in impacted composite plates from full-field measurements, Composites Part A: Applied Science and Manufacturing, vol.40, issue.12, pp.1961-74, 2009.
DOI : 10.1016/j.compositesa.2009.09.024

Z. Hashin, Analysis of stiffness reduction of cracked cross-ply laminates, Engineering Fracture Mechanics, vol.25, issue.5-6, pp.771-779, 1996.
DOI : 10.1016/0013-7944(86)90040-8

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.7, issue.4, p.448, 1973.
DOI : 10.1177/002199837300700404

S. Tsai and V. Azzi, Anisotropic strength of Composites, Experimental Mechanics, vol.5, pp.283-291, 1965.

S. Tsai and E. Wu, A general theory of strengh of anisotropic materials, Journal of Composite Materials, vol.5, pp.55-80, 1971.

A. Puck and H. Schu, Failure analysis of FRP laminates by means of physically based phenomenological models, Composites Science and Technology, vol.62, issue.12-13, pp.1633-62, 2002.
DOI : 10.1016/S0266-3538(01)00208-1

P. Soden, M. Hinton, and A. Kaddour, Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates, Composites Science and Technology, vol.58, issue.7, pp.1011-1033, 1998.
DOI : 10.1016/S0266-3538(98)00078-5

P. Soden, M. Hinton, and A. Kaddour, A comparison of the predictive capabilities of current failure theories for composite laminates, Composites Science and Technology, vol.58, issue.7, pp.1225-1254, 1998.
DOI : 10.1016/S0266-3538(98)00077-3

M. Hinton, A. Kaddour, and P. Soden, A comparison of the predictive capabilities of current failure theories for composite laminates, judged against experimental evidence, Composites Science and Technology, vol.62, issue.12-13, pp.1725-97, 2002.
DOI : 10.1016/S0266-3538(02)00125-2

L. Kachanov, On the time to failure under creep conditions, Izv AN SSSR, Otd Tekhn Nauk, vol.8, pp.26-31, 1958.

J. Chaboche, Continuum Damage Mechanics, parts I and II, Journal of Applied Mechanics, vol.55, pp.55-59, 1989.

M. Pachajoa, M. Frances, and J. Lee, Stress and failure analysis of composite structures, Engineering Fracture Mechanics, vol.50, issue.5-6, pp.883-902, 1995.
DOI : 10.1016/0013-7944(94)E0065-O

D. Sleight, Evaluation of a progressive failure analysis methodology for laminated composite structures, 38th Structures, Structural Dynamics, and Materials Conference, 1999.
DOI : 10.2514/6.1997-1187

. Gasser-a, P. Ladeveze, and P. Peres, Damage modelling for a laminated ceramic composite, Materials Science and Engineering: A, vol.250, issue.2, pp.249-55, 1998.
DOI : 10.1016/S0921-5093(98)00598-X

S. Camara, A. Bunsell, A. Thionnet, and D. Allen, Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage, International Journal of Hydrogen Energy, vol.36, issue.10, pp.6031-6039, 2010.
DOI : 10.1016/j.ijhydene.2010.12.069

URL : https://hal.archives-ouvertes.fr/hal-00595889

P. Ladevèze, G. Lubineau, and D. Violeau, A Computational Damage Micromodel of Laminated Composites, International Journal of Fracture, vol.155, issue.10, pp.139-50, 2006.
DOI : 10.1007/s10704-005-3077-x

A. Wang and F. Crossman, Initiation and Growth of Transverse Cracks and Edge Delamination in Composite Laminates Part 1. An Energy Method, Journal of Composite Materials, vol.14, issue.1, pp.71-87, 1980.
DOI : 10.1177/002199838001400106

T. Yang, Y. Liu, and J. Wang, A study of the propagation of an embedded crack in a composite laminate of finite thickness, Composite Structures, vol.59, issue.4, pp.473-482, 2003.
DOI : 10.1016/S0263-8223(02)00284-2

A. Wang, P. Chou, and S. Lei, A Stochastic Model for the Growth of Matrix Cracks in Composite Laminates, Journal of Composite Materials, vol.18, issue.3, pp.239-54, 1984.
DOI : 10.1177/002199838401800304

H. Fukunaga, T. Chou, P. Peters, and K. Schulte, Probabilistic Failure Strength Analyses of Graphite/Epoxy Cross-Ply Laminates, Journal of Composite Materials, vol.18, issue.4, pp.339-56, 1984.
DOI : 10.1177/002199838401800403

N. Laws and G. Dvorak, Progressive Transverse Cracking In Composite Laminates, Journal of Composite Materials, vol.22, issue.10, pp.900-916, 1988.
DOI : 10.1177/002199838802201001

J. Berthelot, L. Corre, and J. , Statistical analysis of the progression of transverse cracking and delamination in cross-ply laminates, Composites Science and Technology, vol.60, issue.14, pp.2659-2669, 2000.
DOI : 10.1016/S0266-3538(00)00140-8

G. Lubineau and P. Ladeveze, An enhanced mesomodel for laminates based on micromechanics, Composite Science and Technology, vol.62, pp.533-574, 2002.

E. Abisset, F. Daghia, and P. Ladevèze, On the validation of a damage mesomodel for laminated composites by means of open-hole tensile tests on quasi-isotropic laminates, Composites Part A: Applied Science and Manufacturing, vol.42, issue.10, pp.1515-1539, 2011.
DOI : 10.1016/j.compositesa.2011.07.004

G. Lubineau and P. Ladeveze, On a damage mesomodel for laminates : micro ? meso relationships , possibilities and limits, Composite Science and Technology, vol.61, pp.2149-58, 2001.

G. Lubineau and P. Ladevèze, Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard, Computational Materials Science, vol.43, issue.1, pp.137-182, 2008.
DOI : 10.1016/j.commatsci.2007.07.050

Y. Thollon and C. Hochard, A general damage model for woven fabric composite laminates up to first failure, Mechanics of Materials, vol.41, issue.7, pp.820-827, 2009.
DOI : 10.1016/j.mechmat.2009.02.009

J. Maire and J. Chaboche, A new formulation of continuum damage mechanics (CDM) for composite materials, Aerospace Science and Technology, vol.1, issue.4, pp.247-57, 1997.
DOI : 10.1016/S1270-9638(97)90035-3

J. Chaboche and J. Maire, A new micromechanics based CDM model and its application to CMC's, Aerospace Science and Technology, vol.6, issue.2, pp.131-176, 2002.
DOI : 10.1016/S1270-9638(02)01154-9

F. Laurin, N. Carrère, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, issue.1, pp.198-209, 2007.
DOI : 10.1016/j.compositesa.2006.01.018

C. Petipas, Analyse et prévision du comportement à long terme des composites à fibres de carbone/matrie organique, UFR Sciences et techniques de la'Université de Franche -Comté, 2000.

A. Schieffer, Modelisation multi -échelle du comportement mécanique des composites à matrice organique et effets du vieillissement thermique, 2003.

F. Laurin, Approche hybride multiéchelle pour l ' analyse de la tenue de structures composites sous sollicitations complexes 3D, 2009.

F. Irisarri, F. Laurin, N. Carrere, and J. Maire, Progressive damage and failure of mechanically fastened joints in CFRP laminates ??? Part I: Refined Finite Element modelling of single-fastener joints, Composite Structures, vol.94, issue.8, pp.2269-77, 2012.
DOI : 10.1016/j.compstruct.2011.07.023

F. Irisarri, F. Laurin, N. Carrere, and J. Maire, Progressive damage and failure of mechanically fastened joints in CFRP laminates ??? Part II: Failure prediction of an industrial junction, Composite Structures, vol.94, issue.8, pp.2278-84, 2012.
DOI : 10.1016/j.compstruct.2011.07.005

M. Cheung, G. Akhras, and W. Li, Progressive failure analysis of composite plates by the finite strip method, Computer Methods in Applied Mechanics and Engineering, vol.124, issue.1-2, pp.49-61, 1995.
DOI : 10.1016/0045-7825(95)00788-3

E. Pietropaoli, Progressive Failure Analysis of Composite Structures Using a Constitutive Material Model (USERMAT) Developed and Implemented in ANSYS ??, Applied Composite Materials, vol.69, issue.3-4, pp.657-68, 2012.
DOI : 10.1007/s10443-011-9220-0

D. Coleman, On the strength of classical fibres and fibre bundles, Journal of the Mechanics and Physics of Solids, vol.7, issue.1, pp.60-70, 1958.
DOI : 10.1016/0022-5096(58)90039-5

S. Blassiau, Micromechanisms of load transfer in a unidirectional carbon fibre-reinforced epoxy composite due to fibre failures: Part 3. Multiscale reconstruction of composite behaviour, Composite Structures, vol.83, issue.3, pp.312-335, 2008.
DOI : 10.1016/j.compstruct.2007.05.004

URL : https://hal.archives-ouvertes.fr/hal-00130644

S. A. Sinclair, I. Spearing, and S. , Bunsell a. R. Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results, Composites Part A: Applied Science and Manufacturing, vol.43, pp.1514-1536, 2012.

S. Blassiau, Modélisation des phénomènes microstructuraux au sein d'un composite unidirectionnel carbone/époxy et prédiction de durée de vie: contrôle et qualification de réservoirs bobinés, Thèse Ecole des Mines de Paris, 2005.

J. Lamon, Stochastic models of fragmentation of brittle fibers or matrix in composites, Composites Science and Technology, vol.70, issue.5, pp.743-51, 2010.
DOI : 10.1016/j.compscitech.2010.01.005

F. Laurin, Approche multiéchelles des mécanismes de ruine progressive des matériaux stratifiés et analyse de la tenue de structures composites, Thèse Université de Franche -Comté, 2005.

D. Vasconcellos, Réservoirs bobinés hautes pressions pour le stockage de l'hydrogène : Caractérisation expérimentale des matériaux et confrontation avec des modèles d'endommagement, 2010.

B. Gentilleau, Modelisation et validation experimentale du comportement thermomécanique de multicouches polymère -composite bobiné. Application au stockage d'hydrogène hyperbare, Thèse Université de, 2012.

N. Carrere, F. Laurin, and S. Mahdi, Proposition d ' une méthode d ' analyse dédiée aux structures composites soumises à des sollicitations hors-plans. Comptes Rendus des JNC 17 -Poitiers, pp.1-10, 2011.

V. Tagarielli, G. Minisgallo, A. Mcmillan, and N. Petrinic, The response of a multi-directional composite laminate to through-thickness loading, Composites Science and Technology, vol.70, issue.13, pp.1950-1957, 2010.
DOI : 10.1016/j.compscitech.2010.07.013

URL : https://hal.archives-ouvertes.fr/hal-00681637

R. Bargellini, D. Halm, and A. Dragon, Modelling of quasi-brittle behaviour: a discrete approach coupling anisotropic damage growth and frictional sliding, European Journal of Mechanics - A/Solids, vol.27, issue.4, pp.564-81, 2008.
DOI : 10.1016/j.euromechsol.2007.11.003

J. Bataille and J. Kestin, L'interpretation physique de lathermodynamique rationelle, Journal de Mécanique, vol.14, pp.13-32, 1975.

J. Lemaitre and J. Chaboche, Mécanique des matériaux solides, 1992.

P. Germain, Sur quelques concepts fondamentaux de la mécanique Large deformations of solids: physical basis and mathematical modelling, pp.3-25, 1986.

D. Krajcinovic and G. Fonseca, The Continuous Damage Theory of Brittle Materials, Part 1: General Theory, Journal of Applied Mechanics, vol.48, issue.4, pp.809-824, 1981.
DOI : 10.1115/1.3157739

E. Onat and F. Leckie, Representation of Mechanical Behavior in the Presence of Changing Internal Structure, Journal of Applied Mechanics, vol.55, issue.1, pp.1-10, 1988.
DOI : 10.1115/1.3173630

M. Kachanov, Effective Elastic Properties of Cracked Solids: Critical Review of Some Basic Concepts, Applied Mechanics Reviews, vol.45, issue.8, pp.304-335, 1992.
DOI : 10.1115/1.3119761

D. Halm and A. Dragon, A Model of Anisotropic Damage by Mesocrack Growth; Unilateral Effect, International Journal of Damage Mechanics, vol.4, issue.21, pp.384-402, 1996.
DOI : 10.1177/105678959600500403

F. Cormery and H. Welemane, A critical review of some damage models with unilateral effect, Mechanics Research Communications, vol.29, issue.5, pp.391-395, 2002.
DOI : 10.1016/S0093-6413(02)00262-8

URL : https://hal.archives-ouvertes.fr/hal-00139949

A. Spencer, Theory of Invariants, Contiuum Mechanics, pp.239-353, 1971.
DOI : 10.1016/B978-0-12-240801-4.50008-X

J. Boheler, Anisotropic constitutive equations for continous media, Journal de Mécanique, vol.17, pp.153-190, 1978.

A. Spencer, The Formulation of Constitutive Equation for Anisotropic Solids, pp.3-26, 1982.
DOI : 10.1007/978-94-009-6827-1_1

A. Matzenmiller and J. Sackman, On Damage Induced Anisotropy for Fiber Composites, International Journal of Damage Mechanics, vol.3, issue.1, pp.71-86, 1994.
DOI : 10.1177/105678959400300104

R. Bargellini, D. Halm, and A. Dragon, Modelling of anisotropic damage by microcracks: towards a discrete approach, Archives of Mechanics, vol.58, pp.93-123, 2006.

R. Bargellini, D. Halm, and A. Dragon, Discrete approach for modelling quasi-brittle damage: conditions on the set of directions, Comptes Rendus M??canique, vol.335, issue.12, pp.781-786, 2007.
DOI : 10.1016/j.crme.2007.10.003

D. Halm, A. Dragon, and Y. Charles, A modular damage model for quasi-brittle solids - interaction between initial and induced anisotropy, Archive of Applied Mechanics (Ingenieur Archiv), vol.72, issue.6-7, pp.498-510, 2002.
DOI : 10.1007/s00419-002-0226-9

J. Maire and P. Lesne, A damage model for ceramic matrix composites, Aerospace Science and Technology, vol.1, issue.4, pp.259-66, 1997.
DOI : 10.1016/S1270-9638(97)90036-5

C. Dávila, C. Rose, and P. Camanho, A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites, International Journal of Fracture, vol.133, issue.2, pp.211-234, 2009.
DOI : 10.1007/s10704-009-9366-z

I. Lapczyk and J. Hurtado, Progressive damage modeling in fiber-reinforced materials, Composites Part A: Applied Science and Manufacturing, vol.38, issue.11, pp.2333-2374, 2007.
DOI : 10.1016/j.compositesa.2007.01.017

Z. Bazant and B. Oh, Crack band theory for fracture of concrete, Materials and Structures, vol.16, pp.155-177, 1983.

J. Lamon, Stochastic approach to multiple cracking in composite systems based on the extreme-values theory, Composites Science and Technology, vol.69, issue.10, pp.1607-1621, 2009.
DOI : 10.1016/j.compscitech.2009.03.009

W. Weibull, A statistical distribution function of wide applicability, Journal of Applied Mechanics, vol.9, pp.293-296, 1951.

L. Marcin, Modélisation du comportement, de l'endommagement et de la rupture de matériaux composites à renforts tissés pour le dimensionnement robuste de structures, 2010.

O. Allix, P. Feissel, and P. Thévenet, A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues, Computers & Structures, vol.81, issue.12, pp.1177-91, 2003.
DOI : 10.1016/S0045-7949(03)00035-X

E. Lorentz and S. Andrieux, Analysis of non-local models through energetic formulations, International Journal of Solids and Structures, vol.40, issue.12, pp.2905-2941, 2003.
DOI : 10.1016/S0020-7683(03)00110-0

R. Bargellini, J. Besson, E. Lorentz, and S. Michel-ponnelle, A non-local finite element based on volumetric strain gradient: Application to ductile fracture, Computational Materials Science, vol.45, issue.3, pp.762-769, 2009.
DOI : 10.1016/j.commatsci.2008.09.020

URL : https://hal.archives-ouvertes.fr/hal-00379224

E. Lorentz and V. Godard, Gradient damage models: Toward full-scale computations, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.21-22, pp.1927-1971, 2011.
DOI : 10.1016/j.cma.2010.06.025

M. Geers, Finite strain logarithmic hyperelasto-plasticity with softening: a strongly non-local implicit gradient framework, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.30-32, pp.3377-401, 2004.
DOI : 10.1016/j.cma.2003.07.014

J. Chaboche, F. Feyel, and Y. Monerie, Interface debonding models: a viscous regularization with a limited rate dependency, International Journal of Solids and Structures, vol.38, issue.18, pp.3127-60, 2001.
DOI : 10.1016/S0020-7683(00)00053-6

Z. Bazant and F. Lin, Nonlocal smeared cracking model for concrete fracture, Journal of Engineering Mechanics, vol.114, pp.2493-2510, 1988.

Z. Bazant, Nonlocal Damage Theory Based on Micromechanics of Crack Interactions, Journal of Engineering Mechanics, vol.120, issue.3, pp.593-617, 1994.
DOI : 10.1061/(ASCE)0733-9399(1994)120:3(593)

M. Jirasek and Z. Bazant, Localization Analysis of Nonlocal Model Based on Crack Interactions, Journal of Engineering Mechanics, vol.120, issue.7, pp.1521-1542, 1994.
DOI : 10.1061/(ASCE)0733-9399(1994)120:7(1521)

Z. Bazant, Y. Xiang, M. Adley, P. Prat, and S. Akers, Microplane Model for Concrete: II: Data Delocalization and Verification, Journal of Engineering Mechanics, vol.122, issue.3, pp.255-262, 1996.
DOI : 10.1061/(ASCE)0733-9399(1996)122:3(255)

M. Jirasek, Nonlocal models for damage and fracture: Comparison of approaches, International Journal of Solids and Structures, vol.35, issue.31-32, pp.4133-4145, 1998.
DOI : 10.1016/S0020-7683(97)00306-5

G. Duvaut and J. Lions, Inequalities in mechanics and physics. Grundlehre, 1976.

A. Perez-foguet, A. Rodriguez, and A. Huerta, Consistent tangent matrices for substepping schemes, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.35-36, pp.4267-647, 2001.
DOI : 10.1016/S0045-7825(00)00336-4

T. Flatscher and H. Pettermann, A constitutive model for fiber-reinforced polymer plies accounting for plasticity and brittle damage including softening ??? Implementation for implicit FEM, Composite Structures, vol.93, issue.9, pp.2241-2250, 2011.
DOI : 10.1016/j.compstruct.2011.03.012

L. Devroye, Non-Uniform Random Variate Generation, 1986.
DOI : 10.1007/978-1-4613-8643-8

D. Knuth, Seminumerical Algorithms, The Art of Computer Programming, vol.2, 1981.

M. Wisnom, Modelling discrete failures in composites with interface elements, Composites Part A: Applied Science and Manufacturing, vol.41, issue.7, pp.795-805, 2010.
DOI : 10.1016/j.compositesa.2010.02.011

S. Hallett, W. Jiang, B. Khan, and M. Wisnom, Modelling the interaction between matrix cracks and delamination damage in scaled quasi-isotropic specimens, Composites Science and Technology, vol.68, issue.1, pp.80-89, 2008.
DOI : 10.1016/j.compscitech.2007.05.038

M. Arellano, L. Crouzeix, B. Douchin, F. Collombet, H. Moreno et al., Strain field measurement of filament-wound composites at ??55?? using digital image correlation: An approach for unit cells employing flat specimens, Composite Structures, vol.92, issue.10, pp.2457-64, 2010.
DOI : 10.1016/j.compstruct.2010.02.014

S. Hallett, B. Green, W. Kin, H. Cheung, and M. Wisnom, The open hole tensile test: a challenge for virtual testing of composites, International Journal of Fracture, vol.8, issue.2, pp.169-81, 2009.
DOI : 10.1007/s10704-009-9333-8

O. Higgins, R. Mccarthy, M. A. Mccarthy, and C. , Comparison of open hole tension characteristics of high strength glass and carbon fibre-reinforced composite materials, Composites Science and Technology, vol.68, issue.13, pp.2770-2778, 2008.
DOI : 10.1016/j.compscitech.2008.06.003

URL : https://hal.archives-ouvertes.fr/hal-00614621

A. Onder, O. Sayman, T. Dogan, and N. Tarakcioglu, Burst failure load of composite pressure vessels, Composite Structures, vol.89, issue.1, pp.159-66, 2009.
DOI : 10.1016/j.compstruct.2008.06.021

R. Mulyukov, Rapid change of stresses in thickness direction in long orthotropic tube under internal pressure and axial load, Acta Mechanica, vol.211, pp.323-359, 2010.

P. Mertiny, F. Ellyin, and A. Hothan, An experimental investigation on the effect of multi-angle filament winding on the strength of tubular composite structures, Composites Science and Technology, vol.64, issue.1, pp.1-9, 2004.
DOI : 10.1016/S0266-3538(03)00198-2

A. Akdemir and S. Ös, Progressive fatigue failure behavior of glass/epoxy (±75) 2 filament-wound pipes under pure internal pressure, Materials and Design, vol.30, pp.4293-4301, 2009.

J. Hu and K. Chandrashekhara, Fracture analysis of hydrogen storage composite cylinders with liner crack accounting for autofrettage effect, International Journal of Hydrogen Energy, vol.34, issue.8, pp.3425-3460, 2009.
DOI : 10.1016/j.ijhydene.2009.01.094

P. Xu, J. Zheng, and P. Liu, Finite element analysis of burst pressure of composite hydrogen storage vessels, Materials & Design, vol.30, issue.7, pp.2295-301, 2009.
DOI : 10.1016/j.matdes.2009.03.006

A. Thionnet, A. Bunsell, S. Camara, and D. Allen, A simplified FE2 method to model the burst of composite pressure vessels, Proc. JNC 17, 2011.

R. Wang, W. Jiao, W. Liu, and F. Yang, A new method for predicting dome thickness of composite pressure vessels, Journal of Reinforced Plastics and Composites, vol.29, issue.22, pp.3345-3352, 2010.
DOI : 10.1177/0731684410376330

V. Alemany and D. Halm, Simulation de la tenue mécanique de structures composites endommagés par agression thermique, Rapport PFE ISAE-ENSMA, p.2013

M. Minervino, M. Gigliotti, M. Lafarie-frenot, and J. Grandidier, The effect of thermooxidation on the mechanical behaviour of polymer epoxy materials, Polymer Testing, 2013.

M. Ropital, T. Rogaume, and D. Halm, Etude de l'influence d'une agression thermique sur les propriétés mécaniques résiduelles de matériaux composites, p.2013

L. Broutman and S. Sahu, A New Theory to Predict Cumulative Fatigue Damage in Fiberglass Reinforced Plastics, Composite materials: testing and design (2nd Conference), pp.170-88, 1972.
DOI : 10.1520/STP27746S

H. Hahn and R. Kim, Proof Testing of Composite Materials, Journal of Composite Materials, vol.85, issue.3, pp.297-311, 1975.
DOI : 10.1177/002199837500900308

P. Chou and R. Croman, Residual Strength in Fatigue Based on the Strength-Life Equal Rank Assumption, Journal of Composite Materials, vol.9, issue.2, pp.177-194, 1978.
DOI : 10.1177/002199837801200206

P. Chou and R. Croman, Degradation and Sudden-Death Models of Fatigue of Graphite/Epoxy Composites, Composites materials: testing and design (5th Conference), pp.431-54, 1979.
DOI : 10.1520/STP36922S

J. Yang and M. Liu, Residual Strength Degradation Model and Theory of Periodic Proof Tests for Graphite/Epoxy Laminates*, Journal of Composite Materials, vol.4, issue.2, pp.176-203, 1977.
DOI : 10.1177/002199837701100205

J. Yang and M. Liu, Fatigue and Residual Strength Degradation for Graphite/Epoxy Composites Under Tension-Compression Cyclic Loadings, Journal of Composite Materials, vol.12, issue.1, pp.19-39, 1978.
DOI : 10.1177/002199837801200102

J. Yang and C. Sun, Proof Test and Fatigue of Unnotched Composite Laminates, Journal of Composite Materials, vol.14, issue.2, pp.168-74, 1980.
DOI : 10.1177/002199838001400208

J. Yang and D. Jones, Effect of Load Sequence on the Statistical Fatigue of Composites, AIAA Journal, vol.18, issue.12, pp.1525-1531, 1980.
DOI : 10.2514/3.50912

J. Yang and D. Jones, Load sequence effects on the fatigue of unnotched composite laminates, ASTM STP, vol.723, pp.213-232, 1981.

J. Yang and S. Du, An Exploratory Study Into the Fatigue of Composites Under Spectrum Loading, Journal of Composite Materials, vol.17, issue.6, pp.511-526, 1983.
DOI : 10.1177/002199838301700604

J. Yang, R. Miller, and C. Sun, Effect of High Load on Statistical Fatigue of Unnotched Graphite/Epoxy Laminates, Journal of Composite Materials, vol.14, issue.2, pp.82-94, 1980.
DOI : 10.1177/002199838001400201

G. Sendeckyj, Life Prediction for Resin-Matrix Composite Materials, Composite Materials Series, vol.4, pp.431-83, 1991.
DOI : 10.1016/B978-0-444-70507-5.50014-7

G. Sendeckyj, Fitting Models to Composite Materials Fatigue Data, ASTM STP, vol.734, pp.245-60, 1981.
DOI : 10.1520/STP29314S

T. Adam, R. Dickson, C. Jones, H. Reiter, and B. Harris, A power law fatigue damage model for fiber -reinforced plastic laminates, Instn Mech Engrs, pp.155-66, 1986.

X. Diao, L. Lessard, and M. Shokrieh, Statistical model for multiaxial fatigue behavior of unidirectional plies, Composites Science and Technology, vol.59, issue.13, pp.2025-2060, 1999.
DOI : 10.1016/S0266-3538(99)00062-7

T. Philippidis and V. Passipoularidis, Residual strength after fatigue in composites: Theory vs. experiment, International Journal of Fatigue, vol.29, issue.12, pp.2104-2120, 2007.
DOI : 10.1016/j.ijfatigue.2007.01.019

Z. Gao, A cumulative damage model for fatigue life of composite laminates, Journal of Reinforced Plastic Composites, vol.13, pp.128-141, 1994.

J. Payan and C. Hochard, Damage modelling of laminated carbon/epoxy composites under static and fatigue loadings, International Journal of Fatigue, vol.24, issue.2-4, pp.299-306, 2002.
DOI : 10.1016/S0142-1123(01)00085-8

C. Hochard and Y. Thollon, A generalized damage model for woven ply laminates under static and fatigue loading conditions, International Journal of Fatigue, vol.32, issue.1, pp.158-65, 2010.
DOI : 10.1016/j.ijfatigue.2009.02.016

C. Hochard, Fatigue of laminated composite structures, pp.2012-2036
URL : https://hal.archives-ouvertes.fr/hal-01315825

T. Noll, M. Magin, and N. Himmel, Fatigue life simulation of multi-axial CFRP laminates considering material non-linearity, International Journal of Fatigue, vol.32, issue.1, pp.146-57, 2010.
DOI : 10.1016/j.ijfatigue.2009.02.019