-. H. Zhu and J. D. Achenbach, Effect of interfacial zone on mechanical behavior and failure of fiber-reinforced composites, Ale86] Romalis-B.L. Aleksandrov, V.M. : Contact problems in mechanical engineering. Mashinostroenie, pp.381-393, 1986.

]. J. All05 and . Allwood, Survey and performance assessment of solution methods for elastic rough contact problems, Journal of tribology, vol.127, issue.1, pp.10-23, 2005.

-. Nelias, S. Cretu, and E. Antaluca, A three-dimensional friction model for elastic-plastic contact with tangential loading : Application to dented surfaces, ASME, 2004.

]. E. Ant05 and . Antaluca, Contribution à l'étude des contacts élasto-plastiques effet d'un chargement normal et tangentiel, Thèse de doctorat, 2005.

-. Orozco and N. K. Arakere, Analysis of low cycle fatigue properties of single crystal nickel-base turbine blade superalloys, High Temperature Materials and Processes, vol.20, pp.5-6403, 2011.

-. M. Barnett and R. J. Asaro, The non-uniform transformation strain problem for an anisotropic ellipsoidal inclusion Journal of the Mechanics and Physics of Solids : Contact analyses for anisotropic half space : Effect of the anisotropy on the pressure distribution and contact area, Journal of tribology, vol.23, issue.1343, pp.77-83, 1975.

]. C. Bag13 and . Bagault, Mechanical Contact for Layered Anisotropic Materials Using a Semi-Analytical Method, Thèse de doctorat, 2013.

D. L. Strangwood, M. Knott, J. F. Balart, and M. J. , Cleavage initiation in ti-vn and vn microalloyed forging steels, pp.729-736, 2005.

. B. Sinclair-g and J. R. Beisheim, On the three-dimensional finite element analysis of dovetail attachments, Journal of turbomachinery, vol.125, issue.2, pp.372-379, 2003.

-. Lewis, P. Rangaswamy, and B. Benedikt, On elastic interactions between spherical inclusions by the equivalent inclusion method, Computational materials science, vol.37, issue.3, pp.380-392, 2006.

. Bof12, . C. Baietto-m, P. Sainsot, A. A. Lubrecht, and H. Boffy, An efficient 3d model of heterogeneous materials for elastic contact applications using multigrid methods, Journal of tribology, vol.134, issue.2, p.2012

. Bos11, -. J. Schipper, and R. Bosman, Transition from mild to severe wear including running in effects, Wear, vol.270, issue.7, pp.472-478, 2011.

J. Boussinesq-nelias, -. D. Liu, S. Wang, Q. J. Keer, L. M. Boucly et al., Application des potentiels à l'étude de l'équilibre et du mouvement des solides élastiques. Gauthier-Villars, 1885 Contact analyses for bodies with frictional heating and plastic behavior, Journal of tribology, vol.127, p.355, 2005.

. Bou07, -. D. Nelias, I. Green, and V. Boucly, Modeling of the rolling and sliding contact between two asperities, ASME Journal of Tribology, vol.129, issue.2, pp.235-245, 2007.

. Bra90, . A. Lubrecht-a, and A. Brandt, Multilevel matrix multiplication and fast solution of integral equations, Journal of Computational Physics, vol.90, issue.2, pp.348-370, 1990.

-. P. Mouritz, M. K. Bannister, K. H. Leong, and P. J. Callus, Tensile properties and failure mechanisms of 3d woven grp composites, Composites Part A : Applied Science and Manufacturing, vol.30, issue.11, pp.1277-1287, 1999.

C. Cattaneo, Sul contatto di due corpi elastici : distribuzione locale degli sforzi. Rendiconti dell'Accademia nazionale dei Lincei, pp.342-348, 1938.

-. Girard, A. Schaff, and J. L. Chaboche, Numerical analysis of composite systems by using interphase/interface models, Computational Mechanics, vol.20, issue.1, pp.3-11, 1997.

[. Monerie, Y. Chaboche, J. L. Nelias, -. Sadeghi, F. Chaise et al., Interface debonding models : a viscous regularization with a limited rate dependency. International journal of solids and structures On the effect of isotropic hardening on the coefficient of restitution for single or repeated impacts using a semi-analytical method, Tribology Transactions, vol.38, issue.545, pp.3127-3160714, 2001.

-. Li, D. Nelias, R. Kubler, S. Taheri, G. Douchet et al., Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (usp), Journal of Materials Processing Technology, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01101649

-. J. Wang and W. W. Chen, Thermomechanical analysis of elastoplastic bodies in a sliding spherical contact and the effects of sliding speed, heat partition, and thermal softening, Journal of Tribology, vol.130, p.41402, 2008.

-. J. Wang, . W. Kim, and W. W. Chen, Transient thermomechanical analysis of sliding electrical contacts of elastoplastic bodies, thermal softening, and melting inception, Journal of Tribology, vol.131, p.21406, 2009.

Y. Chiu, On the Stress Field Due to Initial Strains in a Cuboid Surrounded by an Infinite Elastic Space, Journal of Applied Mechanics, vol.44, issue.4, p.587, 1977.
DOI : 10.1115/1.3424140

Y. Chiu, On the Stress Field and Surface Deformation in a Half Space With a Cuboidal Zone in Which Initial Strains Are Uniform, Journal of Applied Mechanics, vol.45, issue.2, p.302, 1978.
DOI : 10.1115/1.3424292

M. Ciavarella, The generalized Cattaneo partial slip plane contact problem. I???Theory, International Journal of Solids and Structures, vol.35, issue.18, pp.2349-2362, 1998.
DOI : 10.1016/S0020-7683(97)00154-6

]. M. Cia98b and . Ciavarella, The generalized cattaneo partial slip plane contact problem. ii-examples, International journal of solids and Structures, vol.35, issue.18, pp.2363-2378, 1998.

-. Baranger, P. Ladeveze, A. Mouret, and C. Cluzel, Mechanical behaviour and lifetime modelling of self-healing ceramic-matrix composites subjected to thermomechanical loading in air, Composites Part A : Applied Science and Manufacturing, issue.8, pp.40976-984, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00435883

C. Colombié, Usure induite sous petits débattements, Thèse de doctorat, 1986.

[. Dudragne, G. Daguier, P. A. Vincent, and J. Courbon, Influence of inclusion pairs, clusters and stringers on the lower bound of the endurance limit of bearing steels, Tribology international, vol.36, issue.12, pp.921-928, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00475139

G. Couégnat, Approche multiéchelle du comportement mécanique de matériaux composites à renfort tissé, Thèse de doctorat, 2008.

[. Guerjouma, R. Reynaud, P. Franciosi, P. Rouby, D. Fantozzi et al., Elastic moduli of a 2.5 d cf/sic composite : experimental and theoretical estimates, Composites science and technology, issue.6, pp.60913-925, 2000.

-. Nowell and D. Dini, Flat and rounded fretting contact problems incorporating elastic layers, International journal of mechanical sciences, vol.46, issue.11, pp.1635-1657, 2004.

. V. Zeebroeck-m, E. Tijskens, H. Ramon, and E. Dintwa, Torsion of viscoelastic spheres in contact, Granular Matter, vol.7, issue.2, pp.169-179, 2005.

. [. Dragon-louiset, On a predictive macroscopic contact-sliding wear model based on micromechanical considerations, International Journal of Solids and Structures, vol.38, issue.9, pp.1625-1639, 2000.
DOI : 10.1016/S0020-7683(00)00065-2

URL : https://hal.archives-ouvertes.fr/hal-00111324

D. Durville, Numerical simulation of entangled materials mechanical properties, Journal of Materials Science, vol.40, issue.22, pp.5941-5948, 2005.
DOI : 10.1007/s10853-005-5061-2

URL : https://hal.archives-ouvertes.fr/hal-00114864

]. F. Dys91 and . Dyson, The potentials of ellipsoids of variable densities, El Hage : Modélisation du comportement élastique endommageable de matériaux composites à renfort tridimensionnel Thèse de doctorat, pp.259-288, 1891.

J. D. Eshelbyfan01-]-reynaud, -. Rouby, D. Fantozzi, and G. , Collected Works of JD Eshelby. The Mechanics of Defects and Inhomogeneities Thermomechanical behaviour of long fibres ceramic-ceramic composites, Silicates industriels, pp.9-10109, 2001.

[. Baptiste, D. Fitoussi, and J. , Modélisation micromécanique de l'endommagement des composites à fibres courtes. Mécanique industrielle et matériaux, pp.67-69, 1995.

-. Riccardi, R. Schirrer, F. Montheillet, and C. Fond, Mechanical interaction between spherical inhomogeneities : An assessment of a method based on the equivalent inclusion, European Journal of Mechanics-A/Solids, vol.20, issue.1, pp.59-75, 2001.

-. Kapsa, L. Vincent, and S. Fouvry, Quantification of fretting damage, Fou97] S. Fouvry : Etude quantitative des dégradations en fretting Thèse de doctorat, pp.186-205, 1996.

[. Kapsa, P. Hannel, S. Sauger, E. Fouvry, and S. , An energy description of wear mechanisms and its applications to oscillating sliding contacts, Wear, vol.255, pp.1-6287, 2003.

-. Duo, P. Perruchaut, and S. Fouvry, A quantitative approach of ti-6al-4v fretting damage : friction, wear and crack nucleation, Wear, vol.257, issue.9, pp.916-929, 2004.

]. V. Fri02 and . Fridrici, Fretting d'un alliage de titane revêtu et lubrifié : application au contact aube/disque, Thèse de doctorat, 2002.

B. Fulleringer, . Ful11-]-b, I. Fulleringer, -. De-lyon-nelias, C. Jacq et al., Semi-analytical modeling of complex mechanical contacts : application to inclusions and swear of coated surfaces Galin : Contact Problems of Elasticity Theory A comprehensive method to predict wear and to define the optimum geometry of fretting surfaces, Gal07a] L. Gallego : Fretting et usure des contacts mécaniques : Modélisation numérique Thèse de doctoratGal07b] Nelias-D. Gallego, L. : Modeling of fretting wear under gross slip and partial slip conditions, pp.21014476-485528, 1953.

L. A. Galin, Contact problems : the legacy of LA Galin, 2008.

. Gal10a, -. Fulleringer, S. Deyber, D. Nelias, L. Gallego et al., Multiscale computation of fretting wear at the blade/disk interface A fast and efficient contact algorithm for fretting problems applied to fretting modes i, ii and iii, Tribology International Wear, vol.43, issue.2681, pp.708-718, 2010.

-. Boniface, S. L. Ogin, P. A. Smith, R. P. Greaves, and F. Gao, Damage accumulation in woven-fabric cfrp laminates under tensile loading : Part 1. observations of damage accumulation, Composites science and technology, vol.59, issue.1, pp.123-136, 1999.

-. Q. Liu and X. L. Gao, Strain gradient solution for the eshelby-type polyhedral inclusion problem, Journal of the Mechanics and Physics of Solids, 2011.

-. Gas96-]-ladeveze, M. Poss, and A. Gasser, Damage mechanisms of a woven sicsic composite : Modelling and identification. Composites science and technology, pp.779-784, 1996.

M. Genet, Vers un matériau virtuel pour les composites céramiques, Thèse de doctorat, 2010.

]. F. Gha80 and . Ghahremani, Effect of grain boundary sliding on anelasticity of polycrystals, International Journal of Solids and Structures, vol.16, issue.9, pp.825-845, 1980.

M. Godet, The third-body approach: A mechanical view of wear, Wear, vol.100, issue.1-3, pp.437-452, 1984.
DOI : 10.1016/0043-1648(84)90025-5

-. I. Verpoest, P. Van-houtte, and B. Gommers, Analysis of knitted fabric reinforced composites : Part i. fibre orientation distribution, Composites Part A : Applied Science and Manufacturing, vol.29, issue.12, pp.1579-1588, 1998.

-. M. Ryzhik, . A. Jeffrey, and I. S. Gradshteïn, Table of integrals, series, and products, 2000.

-. J. Lamon and L. Guillaumat, Probabilistic-statistical simulation of the non-linear mechanical behavior of a woven sicsic composite. Composites science and technology, Modélisation du comportement de composite à matrice céramique sous sollicitation de fatigue. Comptes-rendus des 17èmes Journées Nationales sur les Composites (JNC17), pp.803-808, 1996.

Z. Hashin, The Spherical Inclusion With Imperfect Interface, Journal of Applied Mechanics, vol.58, issue.2, pp.444-449, 1991.
DOI : 10.1115/1.2897205

Z. Hashin, Thin interphase/imperfect interface in elasticity with application to coated fiber composites, Journal of the Mechanics and Physics of Solids, vol.50, issue.12, pp.2509-2537, 2002.
DOI : 10.1016/S0022-5096(02)00050-9

H. Hertz, Uber die berührung fester elastischer körper, Heripre, E. : Etude de l'effet du revetement sur le comportement en fretting. 18eme Congres Francais de Mecanique, pp.156-17122, 1882.

M. R. Hesteneshil65-]-r and . Hill, Conjugate direction methods in optimization A self-consistent mechanics of composite materials : Mechanics of elastic contacts, Journal of the Mechanics and Physics of Solids, vol.175, issue.22, pp.213-222, 1965.

S. Nemat-nasser, M. Hori, -. Nelias, G. Lormand, D. Girodin et al., Jäger : A new principle in contact mechanics Jacq : Limite d'endurance et durée de vie en fatigue de roulement du 32CrMoV13 nitrurée en présence d'indentations Development of a threedimensional semi-analytical elastic-plastic contact code Jaegar : New solutions in contact mechanics, Thèse de doctoratJas87] Tsuchida-E. Mura T. Jasiuk, I. : The sliding inclusion under shear. International journal of solids and structures, pp.189-206677, 1987.

-. K. Lee, Y. Y. Earmme, and W. C. Johnson, Approximation of the strain field associated with an inhomogeneous precipitate. i-theory. ii-the cuboidal inhomogeneity, ASME, Transactions, Journal of Applied Mechanics, vol.47, pp.775-788, 1980.

K. L. Johnson, Contact mechanics. Press syndicate of the university of Cambridge, 1985.

[. N. Ju and Y. , Spectral Analysis of Two-Dimensional Contact Problems, Journal of Tribology, vol.118, issue.2, pp.320-328, 1996.
DOI : 10.1115/1.2831303

]. E. Kab02a and . Kabo, Material defects in rolling contact fatigue -influence of overloads and defect clusters, International journal of fatigue, vol.24, issue.8, pp.887-894, 2002.

-. A. Ekberg and E. Kabo, Fatigue initiation in railway wheels -a numerical study of the influence of defects, Wear, vol.253, issue.1, pp.26-34, 2002.

J. J. Kalker, Three-dimensional elastic bodies in rolling contact, 1990.

-. H. Lim, J. H. Lee, S. Im, and J. H. Kim, A new computational approach to contact mechanics using variable-node finite elements, International journal for numerical methods in engineering, vol.73, issue.13, pp.1966-1988, 2008.

C. H. Kuo, Stress disturbances caused by the inhomogeneity in an elastic half-space subjected to contact loading, International Journal of Solids and Structures, vol.44, issue.3-4, pp.860-873, 2007.
DOI : 10.1016/j.ijsolstr.2006.05.021

C. H. Kuo, Contact stress analysis of an elastic half-plane containing multiple inclusions, International Journal of Solids and Structures, vol.45, issue.16, pp.4562-4573, 2008.
DOI : 10.1016/j.ijsolstr.2008.03.032

]. P. Lad95 and . Ladeveze, Modeling and simulation of the mechanical behaviour of cmcs, High-Temperature Ceramic-Matrix Composites, vol.47, pp.53-63, 1995.

]. P. Lad02 and . Ladeveze, An anisotropic damage theory with unilateral effects : applications to laminate and three-and four-dimensional composites. Continuum damage mechanics of materials and structures, 2002.

-. S. Letombe, C. Cluzel, P. Ladeveze, . Thommeret-b, C. Percevault et al., A cmc damage model based on micro-and macromechanics for high-temperature and complex loading Probabilistic-statistical approach to matrix damage and stress?strain behavior of 2-d woven sic/sic ceramic matrix composites, High Temperature Ceramic Matrix Composites, pp.578-583, 1998.

J. Lamon, A micromechanics-based approach to the mechanical behavior of brittle-matrix composites. Composites science and technology, pp.61-2259, 2001.

[. J. Thebault and F. Lamouroux, Kinetics and mechanisms of oxidation of 2d woven c/sic composites : I, experimental approach, Journal of the American ceramic society, issue.8, pp.772049-2057, 2005.

T. A. Laursen-wang, -. Liu, G. Liu, and S. , Computational contact and impact mechanics : fundamentals of modeling interfacial phenomena in nonlinear finite element analysis A versatile method of discrete convolution and fft (dc-fft) for contact analyses, Wear, vol.243, issue.12, pp.101-111, 2000.
DOI : 10.1007/978-3-662-04864-1

[. Liu and S. , Elastic Fields due to Eigenstrains in a Half-Space, Journal of Applied Mechanics, vol.72, issue.6, p.871, 2005.
DOI : 10.1115/1.2047598

[. Wang, Z. Keer, L. M. Wang, Q. Liu, and S. , Analytical solution for elastic fields caused by eigenstrains in a half-space and numerical implementation based on fft, International Journal of Plasticity, 2012.

-. V. Gusakov, G. Huysmans, A. Prodromou, I. Verpoest, and S. V. Lomov, Textile geometry preprocessor for meso-mechanical models of woven composites, Composites Science and Technology, vol.60, issue.11, pp.2083-2095, 2000.

-. I. Verpoest and S. V. Lomov, Compression of woven reinforcements : a mathematical model, Journal of reinforced plastics and composites, vol.19, issue.16, pp.1329-1350, 2000.

[. Luo, Y. Parnas, R. S. Prodromou, A. Verpoest, I. Phelan et al., Textile composites : modelling strategies, Composites Part A : applied science and manufacturing, vol.32, issue.10, pp.1379-1394, 2001.

-. S. Ivanov, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai et al., Meso-fe modelling of textile composites : Road map, data flow and algorithms, Composites Science and Technology, vol.67, issue.9, pp.1870-1891, 2007.

-. Perie, D. S. Ivanov, I. Verpoest, D. Marsal, and S. V. Lomov, Modeling three-dimensional fabrics and three-dimensional reinforced composites : challenges and solutions, Textile Research Journal, vol.81, issue.1, pp.28-41, 2011.

]. O. Los10 and . Loseille, Prévision de la durée de vie des composites à matrice céramique auto cicatrisante, en fatigue statique, à haute température (= 800?C), 2010.

A. E. Love, A treatise on the mathematical theory of elasticity, 1920.
URL : https://hal.archives-ouvertes.fr/hal-01307751

[. Lubrecht and A. W. , A Fast Solution of the Dry Contact Problem and the Associated Sub-Surface Stress Field, Using Multilevel Techniques, Journal of Tribology, vol.113, issue.1, pp.128-133, 1991.
DOI : 10.1115/1.2920577

-. J. Weng and H. A. Luo, On eshelby's inclusion problem in a three-phase spherically concentric solid, and a modification of mori-tanaka's method, Mechanics of Materials, vol.6, issue.4, pp.347-361, 1987.

W. D. Macmillan, The Theory of the Potential : Theoretical Mechanics, 1958.

]. K. Man94, Man : Contact mechanics using boundary elements, 1994.

]. L. Mar10, Marcin : Modelisation du comportement, de l'endommagement et de la rupture de materiaux composites à renforts tisses pour le dimensionnement robuste de structures, Thèse de doctorat, 2010.

[. Wintermantel, E. Mayer, and J. , Knitted carbon fiber reinforced thermoplastics : Structural characterization with image analysis, Technical Research Centre of Finland, Textiles and Composites, pp.315-320, 1992.

[. H. Papanikos, P. Meguid, and S. A. , Theoretical and experimental studies of structural integrity of dovetail joints in aeroengine discs, Journal of materials processing technology, vol.56, issue.1, pp.668-677, 1996.

-. C. Ludema and H. C. Meng, Wear models and predictive equations: Their form and content, Wear, vol.181, issue.183, pp.443-457, 1995.
DOI : 10.1016/0043-1648(94)07102-0

. M. Keer-l and G. R. Miller, Interaction between a rigid indenter and a near-surface void or inclusion, 1983.

]. R. Min36, Mindlin : Force at a point in the interior of a semi-infinite solid, Physics, vol.7, issue.5, pp.195-202, 1936.

-. H. Cheng, R. D. Mindlin, and R. D. Mindlin, Nuclei of strain in the semi-infinite solid Thermoelastic stress in the semi-infinite solid, Journal of Applied Physics Journal of Applied Physics, vol.21, issue.21, pp.926-930931, 1950.

-. Moh95-]-blanpain, J. P. Celis, J. R. Roos, L. Stals, M. Van-stappen et al., Oxidational wear of tin coatings on tool steel and nitrided tool steel in unlubricated fretting, Wear, vol.188, issue.12, pp.130-137, 1995.

-. K. Tanaka and T. Mori, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta metallurgica, vol.21, issue.5, pp.571-574, 1973.

[. Moschovidis and Z. A. , Two-Ellipsoidal Inhomogeneities by the Equivalent Inclusion Method, Journal of Applied Mechanics, vol.42, issue.4, p.847, 1975.
DOI : 10.1115/1.3423718

-. C. Cheng and T. Mura, The elastic field outside an ellipsoidal inclusion, Journal of Applied Mechanics, vol.44, p.591, 1977.

-. R. Furuhashi and T. Mura, The elastic inclusion with a sliding interface, Journal of applied mechanics, vol.51, issue.2, pp.308-310, 1984.

-. Jasiuk, B. Tsuchida, and T. Mura, The stress field of a sliding inclusion, International journal of solids and structures, vol.21, issue.12, pp.1165-1179, 1985.

T. Mura, Micromechanics of defects in solids, 1987.

-. M. Endo and Y. Murakami, Effects of defects, inclusions and inhomogeneities on fatigue strength, International Journal of Fatigue, vol.16, issue.3, pp.163-182, 1994.

-. Nishiyama, T. Nojiri, and Y. Nakasone, Numerical equivalent inclusion method : a new computational method for analyzing stress fields in and around inclusions of various shapes, Materials Science and Engineering : A, vol.285, issue.1, pp.229-238, 2000.

R. Naslain, Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview, Composites Science and Technology, vol.64, issue.2, pp.155-170, 2004.
DOI : 10.1016/S0266-3538(03)00230-6

. L. Dumont-m, F. Champiot, A. Vincent, D. Girodin, R. Fougeres et al., Role of inclusions, surface roughness and operating conditions on rolling contact fatigue, Journal of tribology, vol.121, issue.2, pp.240-251, 1999.

[. Boucly, V. Nelias, and D. , Rolling of an elastic ellipsoid upon an elastic-plastic flat, ASME Journal of Tribology, vol.129, issue.4, pp.791-800, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00506317

-. B. King and T. C. O-'sullivan, Sliding contact stress field due to a spherical indenter on a layered elastic half-space, Journal of tribology, vol.110, issue.2, pp.235-240, 1988.

]. P. Pan75, Panagiotopoulos : A nonlinear programming approach to the unilateral contact-, and friction-boundary value problem in the theory of elasticity, Archive of Applied Mechanics, vol.44, issue.6, pp.421-432, 1975.

[. Deyber, S. Paulin, and C. , Wear kinetics of ti?6al?4v under constant and variable fretting sliding conditions, Wear, vol.259, issue.1, pp.292-299, 2005.

]. C. Pau06 and . Paulin, Etude de l'endommagement du contact multicouche aube/disque sous chargement de fretting : Impact des sollicitations variables et de la dimension du contact, Thèse de doctorat, 2006.

]. O. Pen02 and . Penas, Etude de composites SiC/SiBC à matrice multiséquencée en fatigue cyclique à hautes températures sous air, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon, 2002.

. M. Keer-l and I. A. Polonsky, A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques, Wear, vol.231, issue.2, pp.206-219, 1999.

]. I. Pol00 and . Polonsky, Fast methods for solving rough contact problems : a comparative study, Journal of tribology, vol.122, p.36, 2000.

. A. Teukolsky-s, W. T. Vetterling, B. P. Flannery, and W. H. Press, Numerical recipes in fortran 77 : the art of scientific computing : The effect of slightly weakened interfaces on the overall elastic properties of composite materials, Fortran Numer. Recipes Mechanics of Materials, vol.1, issue.144, pp.269-281, 1992.

-. D. Zhu, W. W. Chen, Q. J. Wang, and N. Ren, Plasto-elastohydrodynamic lubrication (pehl) in point contacts, Journal of tribology, vol.132, issue.3, 2010.

]. G. Rod96, Rodin : Eshelby's inclusion problem for polygons and polyhedra, The Jet Engine. Rolls-Royce, pp.1977-1995, 1986.

M. B. Rubin, A Cosserat shell model for interphases in elastic media, Journal of the Mechanics and Physics of Solids, vol.52, issue.5, pp.1023-1052, 2004.
DOI : 10.1016/j.jmps.2003.09.030

. Sac83, -. A. Hills, and A. Sackfield, Some useful results in the tangentially loaded hertzian contact problem, The Journal of Strain Analysis for Engineering Design, vol.18, issue.2, pp.107-110, 1983.

[. Nelias, D. Sainsot, and P. , A numerical model for elastoplastic rough contact, Computer Modeling in Engineering and Sciences, vol.3, issue.4, pp.497-506, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00454931

-. Marcin, Z. Aboura, D. Marsal, and J. Schneider, Experimental investigation and behavior modeling of a 3d interlock woven fabric composite : Part 1, pp.380-388, 2008.

Z. Aboura, M. L. Benzeggagh, D. Marsal, and J. Schneider, A meso-fe voxel model of an interlock woven composite, Poster of the 17th International Conference on Composite Materials, 2009.

-. T. Mura and K. Seo, The elastic field in a half space due to ellipsoidal inclusions with uniform dilatational eigenstrains, Journal of Applied Mechanics, vol.46, p.568, 1979.

-. R. Sharma, P. Sharma, . L. Taylor-r, J. C. Simo, . G. Cormier-n et al., On the eshelby's inclusion problem for ellipsoids with nonuniform dilatational gaussian and exponential eigenstrains Consistent tangent operators for rateindependent elastoplasticity Computer methods in applied mechanics and engineering Contact stresses in dovetail attachments : finite element modeling Journal of engineering for gas turbines and power Damage and failure mechanisms of 2, Journal of applied mechanics Acta materialia, vol.70, issue.124118, pp.418-425101, 1985.

D. A. Spence, The hertz contact problem with finite friction, Journal of Elasticity, vol.73, issue.3-4, pp.297-319, 1975.
DOI : 10.1007/BF00126993

-. Tong, G. P. Steven, T. Ishikawa, and P. Tan, Behavior of 3d orthogonal woven cfrp composites. part i. experimental investigation, Composites Part A : Applied Science and Manufacturing, issue.3, pp.31259-271, 2000.

M. Taya, Elastic fields in a polyhedral inclusion with uniform eigenstrains and related problems, 2001.

]. B. Tra12 and . Tranquart, Vers un matériau virtuel pour l'optimisation qualitative d'une nouvelle famille de CMCs, Thèse de doctorat, 2012.

-. V. Lomov, I. Verpoest, . Soderberg-s, and O. Vingsbo, Virtual textile composites software wisetex : Integration with micromechanical, permeability and structural analysis On fretting maps, Composites Science and Technology Wear, vol.65, issue.1262, pp.2563-2574131, 1988.

. Vin92, -. Berthier, M. Godet, and L. Vincent, Testing methods in fretting fatigue : a critical appraisal, ASTM SPECIAL TECHNICAL PUBLICATION, vol.1159, pp.33-33, 1992.

]. A. Vos85 and . Voskamp, Material response to rolling contact loading, J. Tribology(Trans . ASME), vol.107, issue.3, pp.359-366, 1985.

L. J. Walpole, A coated inclusion in an elastic medium, Mathematical Proceedings of the Cambridge Philosophical Society, vol.81, issue.03
DOI : 10.1007/BF00126987

-. Z. Wang, H. Wang, D. Zhu, . Z. Hu-y, and Z. J. Wang, Partial Slip Contact Analysis on Three-Dimensional Elastic Layered Half Space, Journal of Tribology, vol.132, issue.2, p.2010
DOI : 10.1115/1.4001011

K. Willner, Fully Coupled Frictional Contact Using Elastic Halfspace Theory, Journal of Tribology, vol.130, issue.3, 1988.
DOI : 10.1115/1.2913537

P. Wriggers, Computational contact mechanics, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00466790

-. S. Du and L. Wu, The elastic field caused by a circular cylindrical inclusion. i : Inside the region, Journal of applied mechanics, vol.62, issue.3, pp.579-584, 1995.

-. Y. Du and L. Wu, The elastic field caused by a circular cylindrical inclusion . ii : Inside the region, Journal of applied mechanics, vol.62, issue.3, pp.585-589, 1995.

-. C. Sanday and H. Y. Yu, Elastic field in joined semi-infinite solids with an inclusion, Proceedings of the Royal Society of London. Series A : Mathematical and Physical Sciences, pp.434521-530, 1892.

-. C. Sanday and H. Y. Yu, Elastic fields in joined half-spaces due to nuclei of strain, Proceedings of the Royal Society of London. Series A : Mathematical and Physical Sciences, pp.434503-519, 1892.

-. Uetsuji, T. Kurashiki, and M. Zako, Finite element analysis of damaged woven fabric composite materials, Composites Science and Technology, vol.63, issue.3, pp.507-516, 2003.

-. S. Meguid and Z. Zhong, On the elastic field of a shpherical inhomogeneity with an imperfectly bonded interface, Journal of elasticity, vol.46, issue.2, pp.91-113, 1997.

C. W. Keer, L. M. Wang, Q. J. Zhou, and K. , A fast method for solving three-dimensional arbitrarily shaped inclusions in a half space, Computer Methods in Applied Mechanics and Engineering, vol.198, issue.9, pp.885-892, 2009.

.. Vues-du-disque-de-la-soufflante, a) et de la soufflante du CFM56-7 (b, pp.56-61

]. Réseaux-de-fissures-[-gen10, 28 I.22 État initial d'un composite tissé 3D CMO, 29 I.23 Mécanismes d'endommagement du 2.5D-C/époxy [Cou08]. . . . . . . 30 I.24 Mécanismes de dégradation observées sur un tissé 3D CMO [EH06], p.30

.. Chiu-et-la-méthode-de-galerkin, III.16Visualisation du déplacement normal en surface x 3 = 0 le long de l'axe x 2 = 0. Comparaison entre la méthode de décomposition de, p.89

I. , E. , =. , =. 4e-s-[-ful11, ]. et al., 90 III.18Distributions des pressions de contact pour différents revêtements avec la méthode semi-analytique MEIM : E c = 0.25E s , E c = 0.5E s , E c = E s , E c = 2E s , et, p.95

.. Différents-tenseurs-de-localisation, 124 IV.8 Décomposition du problème d'hétérogénéité avec décohésion en trois sous-problèmes élémentaires, p.127

.. Trajet-de-chargement-normal, 142 V.10 Profils de pressions (lignes pleines) normalisées par la pression de Hertz P 0 et profils de cisaillements (lignes pointillées) normalisées par µP 0 représentant le coefficient de frottement multipliée par la pression de Hertz, en fonction du coefficient de frottement à l'interface µ, p.143

.. Matériaux-de-l-'étude, 101 III.3 Paramètres géométriques et matériaux de l'étude, III.2 Paramètres géométriques et, p.104