F. L. Addessio and J. N. Johnson, A constitutive model for the dynamic response of brittle materials, Journal of Applied Physics, vol.67, issue.7, pp.3275-3286, 1990.
DOI : 10.1063/1.346090

R. W. Armstrong, C. S. Coffey, V. F. Devost, and W. L. Elban, Crystal size dependence for impact initiation of cyclotrimethylenetrinitramine explosive, Journal of Applied Physics, vol.68, issue.3, pp.979-984, 1990.
DOI : 10.1063/1.346664

R. W. Armstrong, H. L. Ammon, W. L. Elban, and D. H. Tsai, Investigation of hot spot characteristics in energetic crystals, Thermochimica Acta, vol.384, issue.1-2, pp.303-313, 2002.
DOI : 10.1016/S0040-6031(01)00786-9

B. W. Asay, G. W. Laabs, B. F. Henson, and D. J. Funk, Speckle photography during dynamic impact of an energetic material using laser-induced fluorescence, Journal of Applied Physics, vol.82, issue.3, pp.1093-1099, 1997.
DOI : 10.1063/1.365876

B. W. Asay, P. M. Dickson, B. F. Henson, C. S. Fugard, D. J. Funk et al., Dynamic measurement of the influence of projectile radius and velocity on strain localization during impact of an energetic material, 11th Int. Detonation Symp, 1998.
DOI : 10.2172/334326

M. R. Baer, Computational modeling of heterogeneous reactive materials at the mesoscale, AIP Conference Proceedings, pp.27-34, 2000.
DOI : 10.1063/1.1303415

M. R. Baer, Modeling heterogeneous energetic materials at the mesoscale, Thermochimica Acta, vol.384, issue.1-2, pp.351-367, 2002.
DOI : 10.1016/S0040-6031(01)00794-8

K. Bagi, A quasi-static numerical model for micro-level analysis of granular assemblies, Mechanics of Materials, vol.16, issue.1-2, pp.101-110, 1993.
DOI : 10.1016/0167-6636(93)90032-M

K. Bagi, Methods to generate ramdom dense arrangements of particules, 2005.

K. Bagi, An algorithm to generate random dense arrangements for discrete element simulations of granular assemblies, Granular Matter, vol.7, issue.1, pp.31-43, 2005.
DOI : 10.1007/s10035-004-0187-5

P. Bailly, Dynamic behaviour of concrete, constitutive models, Chap 2 of " Dynamic Behavior of Concrete and Seismic Engineering, pp.55-95, 2009.

P. Bailly, F. Delvare, J. Vial, J. L. Hanus, M. Biessy et al., Dynamic behavior of an aggregate material at simultaneous high pressure and strain rate: SHPB triaxial tests, International Journal of Impact Engineering, vol.38, issue.2-3, pp.2-3, 2011.
DOI : 10.1016/j.ijimpeng.2010.10.005

URL : https://hal.archives-ouvertes.fr/hal-00757019

B. Banerjee and D. O. Adams, Micromechanics-based determination of effective elastic properties of polymer bonded explosives, Physica B: Condensed Matter, vol.338, issue.1-4, pp.1-4, 2003.
DOI : 10.1016/S0921-4526(03)00451-4

S. G. Bardenhagen, A. D. Brydon, T. O. Williams, and C. Collet, Coupling Grain Scale and Bulk Mechanical Response for PBXs Using Numerical Simulations of Real Microstructures, AIP Conference Proceedings, pp.479-482, 2005.
DOI : 10.1063/1.2263364

. Smith, Direct numerical simulation of weak shocks in granular material, 12th Int. Detonation Symp, pp.497-503, 2002.

A. Barua and M. Zhou, A Lagrangian framework for analyzing microstructural level response of polymer-bonded explosives, Modelling and Simulation in, Materials Science and Engineering, vol.19, issue.5, p.55001, 2011.

A. Barua, Y. Horie, and M. Zhou, Energy localization in HMX-Estane polymer-bonded explosives during impact loading, Journal of Applied Physics, vol.111, issue.5, pp.54902-054911, 2012.
DOI : 10.1063/1.3688350

A. Barua, Y. Horie, and M. Zhou, Microstructural level response of HMX-Estane polymer-bonded explosive under effects of transient stress waves, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 2012.
DOI : 10.1098/rspa.2012.0279

R. Belmas, La transition choc-détonation dans les explosifs solides hétérogènes, CEA Saclay, 2003.

J. G. Bennett, K. S. Haberman, J. N. Johnson, and B. W. Asay, A constitutive model for the non-shock ignition and mechanical response of high explosives, Journal of the Mechanics and Physics of Solids, vol.46, issue.12, pp.46-2303, 1998.
DOI : 10.1016/S0022-5096(98)00011-8

N. K. Bourne, Impact on alumina. I. Response at the mesoscale, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.462, issue.2074, pp.462-3061, 2006.
DOI : 10.1098/rspa.2006.1661

N. K. Bourne and J. E. Field, Bubble Collapse and the Initiation of Explosion, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.435, issue.1894, pp.435-423, 1894.
DOI : 10.1098/rspa.1991.0153

N. K. Bourne and J. E. Field, Explosive ignition by the collapse of cavities, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.455, issue.1987, pp.455-2411, 1987.
DOI : 10.1098/rspa.1999.0410

D. Boutt and B. , McPherson The Role of Particle Packing in Modeling Rock Mechanical Behavior using Discrete Elements, Discrete Element Methods, pp.86-92

F. P. Bowden and O. A. Gurton, Birth and Growth of Explosion in Liquids and Solids Initiated by Impact and Friction, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.198, issue.1054, pp.198-350, 1054.
DOI : 10.1098/rspa.1949.0106

F. P. Bowden and Y. D. Yoffe, Initiation and Growth of Explosion in Liquids and Solids, American Journal of Physics, vol.20, issue.4, 1952.
DOI : 10.1119/1.1933188

F. P. Bowden and J. E. Field, The Brittle Fracture of Solids by Liquid Impact, by Solid Impact, and by Shock, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.282, issue.1390, pp.282-331, 1390.
DOI : 10.1098/rspa.1964.0236

A. M. Bragov, G. M. Grushevsky, and A. K. Lomunov, Use of the Kolsky method for studying shear resistance of soils, Dymat. Journal, vol.3, pp.253-259, 1994.

R. V. Browning, Microstructural model of mechanical initiation of energetic materials, AIP Conference Proceedings, pp.405-408, 1996.
DOI : 10.1063/1.50669

R. V. Browning and R. J. Scammon, Microstructural Model of Ignition for Time Varying Loading Conditions, AIP Conference Proceedings, pp.987-990, 2002.
DOI : 10.1063/1.1483703

J. Brugada, Y. P. Cheng, K. Soga, and J. C. Santamarina, Discrete element modelling of geomechanical behaviour of methane hydrate soils with pore-filling hydrate distribution, Granular Matter, vol.111, issue.B5, pp.517-525, 2010.
DOI : 10.1007/s10035-010-0210-y

A. L. Brundage, R. R. Wixom, A. S. Tappan, and G. T. Long, MESOSCALE SIMULATIONS OF SHOCK INITIATION IN ENERGETIC MATERIALS CHARACTERIZED BY THREE-DIMENSIONAL NANOTOMOGRAPHY, AIP Conference Proceedings, issue.1, pp.1195-315, 2009.
DOI : 10.1063/1.3295132

N. Burlion, G. Pijaudier-cabot, and N. Dahan, Experimental analysis of compaction of concrete and mortar, International Journal for Numerical and Analytical Methods in Geomechanics, vol.183, issue.15, pp.1467-1486, 2001.
DOI : 10.1002/nag.178

URL : https://hal.archives-ouvertes.fr/hal-01006829

E. Catry, Décomposition d'un explosif soumis à un chauffage localisé et rapide, 2012.

M. M. Chaudhri, Photographic evidence for ignition by friction in a deflagrating explosive single crystal, Journal of Physics D: Applied Physics, vol.25, issue.3, p.552, 1992.
DOI : 10.1088/0022-3727/25/3/034

M. M. Chaudhri and J. E. Field, The Role of Rapidly Compressed Gas Pockets in the Initiation of Condensed Explosives, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.340, issue.1620, pp.340-113, 1620.
DOI : 10.1098/rspa.1974.0143

J. Chen, Y. Long, Y. Liu, F. Nie, and J. Sun, The first-principle study on the equation of state of HMX under high pressure, Science China Physics, Mechanics and Astronomy, vol.95, issue.14, pp.831-835, 2011.
DOI : 10.1007/s11433-011-4321-1

B. E. Clements and E. M. Mas, A theory for plastic-bonded materials with a bimodal size distribution of filler particles, Modelling and Simulation in, Materials Science and Engineering, vol.12, issue.3, p.407, 2004.

M. W. Conroy, I. I. Oleynik, S. V. Zybin, and C. T. White, First-principles anisotropic constitutive relationships in ??-cyclotetramethylene tetranitramine (??-HMX), Journal of Applied Physics, vol.104, issue.5, pp.53506-053506, 2008.
DOI : 10.1063/1.2973689

F. Delmaire-sizes, R. Belmas, D. Picart, and H. Trumel, Low velocity impact tests on a HMX-based explosive, pp.1005-1016, 2007.

J. J. Dick, D. E. Hooks, R. Menikoff, and A. R. Martinez, Elastic???plastic wave profiles in cyclotetramethylene tetranitramine crystals, Journal of Applied Physics, vol.96, issue.1, pp.374-379, 2004.
DOI : 10.1063/1.1757026

J. K. Dienes, A statistical theory of fragmentation, Proceedings of 19th US Rock Mechanics Symposium. University of Nevada, pp.51-55, 1978.

J. K. Dienes, A statistical theory of fragmentation processes, Mechanics of Materials, vol.4, issue.3-4, pp.3-4, 1985.
DOI : 10.1016/0167-6636(85)90030-4

J. K. Dienes, A Unified Theory of Flow, Hot Spots, and Fragmentation with an Application to Explosive Sensitivity, High-Pressure Shock Compression of Solids II, pp.366-398, 1996.

J. K. Dienes, Q. H. Zuo, and J. D. Kershner, Impact initiation of explosives and propellants via statistical crack mechanics, Journal of the Mechanics and Physics of Solids, vol.54, issue.6, pp.1237-1275, 2006.
DOI : 10.1016/j.jmps.2005.12.001

E. R. Dougherty and Y. Chen, Robust optimal granulometric bandpass filters, Robust optimal granulometric bandpass filters, pp.1357-1372, 2001.
DOI : 10.1016/S0165-1684(01)00017-2

J. W. Evans, Random and cooperative sequential adsorption, Reviews of Modern Physics, vol.65, issue.4, pp.1281-1329, 1993.
DOI : 10.1103/RevModPhys.65.1281

Y. T. Feng, K. Han, and D. R. Owen, Filling domains with disks: an advancing front approach, International Journal for Numerical Methods in Engineering, vol.55, issue.5, pp.699-713, 2003.
DOI : 10.1002/nme.583

J. E. Field, G. M. Swallowe, and S. N. Heavens, Ignition Mechanisms of Explosives during Mechanical Deformation, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.382, issue.1782, pp.382-231, 1782.
DOI : 10.1098/rspa.1982.0099

J. E. Field, N. K. Bourne, S. J. Palmer, S. M. Walley, J. Sharma et al., Hot-Spot Ignition Mechanisms for Explosives and Propellants [and Discussion], Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.339, issue.1654, pp.339-269, 1654.
DOI : 10.1098/rsta.1992.0034

P. Forquin, A. Arias, and R. Zaera, An experimental method of measuring the confined compression strength of geomaterials, International Journal of Solids and Structures, vol.44, issue.13, pp.4291-4317, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.022

P. Forquin, G. Gary, and F. Gatuingt, A testing technique for concrete under confinement at high rates of strain, International Journal of Impact Engineering, vol.35, issue.6, pp.425-446, 2008.
DOI : 10.1016/j.ijimpeng.2007.04.007

URL : https://hal.archives-ouvertes.fr/hal-00994320

P. Forquin, K. Safa, and G. Gary, Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests, Cement and Concrete Research, vol.40, issue.2, pp.321-333, 2010.
DOI : 10.1016/j.cemconres.2009.09.024

URL : https://hal.archives-ouvertes.fr/hal-00425466

T. Gabet, Y. Malécot, and L. Daudeville, Triaxial behaviour of concrete under high stresses: Influence of the loading path on compaction and limit states, Cement and Concrete Research, vol.38, issue.3, pp.403-412, 2008.
DOI : 10.1016/j.cemconres.2007.09.029

URL : https://hal.archives-ouvertes.fr/hal-00425312

G. Gary and P. Bailly, Behaviour of quasi-brittle material at high strain rate. Experiment and modelling, European Journal of Mechanics -A/Solids, pp.403-420, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00111597

G. Gary, P. Bailly, and F. Gatuingt, Testing concrete at high strains and high rates of strain, 3rd International Symposium on Impact Engineering, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00116562

D. E. Grady and M. E. Kipp, The growth of unstable thermoplastic shear with application to steady-wave shock compression in solids*, Journal of the Mechanics and Physics of Solids, vol.35, issue.1, pp.95-119, 1987.
DOI : 10.1016/0022-5096(87)90030-5

M. Gratton, V. D. Le, A. Frachon, M. Caliez, and D. Picart, Mechanical characterization of a viscoelastic plastic granular material sensitive to hydrostatic pressure, Proceedings of the 4th WSEAS/IASME international conference on System science and simulation in engineering, pp.107-114, 2005.

G. T. Gray and W. R. Blumenthal, Split-Hopkinson Pressure bar testing of soft materials, Mechanical testing and Evaluation, pp.488-496, 2000.

C. Gruau, D. Picart, R. Belmas, E. Bouton, F. Delmaire-sizes et al., Ignition of a confined high explosive under low velocity impact, International Journal of Impact Engineering, vol.36, issue.4, pp.537-550, 2009.
DOI : 10.1016/j.ijimpeng.2008.08.002

URL : https://hal.archives-ouvertes.fr/hal-00585291

J. C. Gump and S. M. Peiris, Isothermal equations of state of beta octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine at high temperatures, Journal of Applied Physics, vol.97, issue.5, pp.97-053513, 2005.
DOI : 10.1063/1.1856227

R. M. Hackett and J. G. Bennett, An implicit finite element material model for energetic particulate composite materials, International Journal for Numerical Methods in Engineering, vol.12, issue.6, pp.1191-1209, 2000.
DOI : 10.1002/1097-0207(20001130)49:9<1191::AID-NME997>3.0.CO;2-V

O. Häggström and R. Meester, Nearest neighbor and hard sphere models in continuum percolation, Random Structures and Algorithms, vol.9, issue.3, pp.295-315, 1996.
DOI : 10.1002/(SICI)1098-2418(199610)9:3<295::AID-RSA3>3.0.CO;2-S

E. J. Haney and G. Subhash, Edge-on-impact response of a coarse-grained magnesium aluminate spinel rod, International Journal of Impact Engineering, vol.40, issue.41, pp.40-41, 2012.
DOI : 10.1016/j.ijimpeng.2011.10.001

D. M. Hanson-parr and T. P. Parr, Thermal properties measurements of solid rocket propellant oxidizers and binder materials as a function of temperature, Journal of Energetic Materials, vol.2, issue.1, pp.1-48, 1999.
DOI : 10.1002/prep.19920170503

B. F. Henson, B. W. Asay, L. B. Smilowitz, and P. M. Dickson, Ignition Chemistry in HMX from Thermal Explosion to Detonation, AIP Conference Proceedings, pp.1069-1072, 2002.
DOI : 10.1063/1.1483723

B. F. Henson, L. Smilowitz, J. J. Romero, and B. W. Asay, MODELING THERMAL IGNITION AND THE INITIAL CONDITIONS FOR INTERNAL BURNING IN PBX 9501, AIP Conference Proceedings, issue.1, pp.1195-257, 2009.
DOI : 10.1063/1.3295118

B. F. Henson, B. W. Asay, R. K. Sander, S. F. Son, J. M. Robinson et al., Phase Transition by Second Harmonic Generation, Physical Review Letters, vol.82, issue.6, pp.1213-1216, 1999.
DOI : 10.1103/PhysRevLett.82.1213

F. Hild and S. Roux, CORRELI Q4 : A Software for " Finite-element " Displacement Field Measurements by Digital Image Correlation, Internal report no, 2008.

K. Hohenemser and W. Prager, Beitrag zur Mechanik des bildsamen Verhaltens von Flu??stahl, Beitragzur mechanic desbildsamen verhaltensvonflubstahl, pp.1-14, 1932.
DOI : 10.1002/zamm.19320120102

T. J. Holmquist, G. R. Johnson, and W. H. Cook, A computational constitutive model for concrete subjected to large strains high strain rates, and high pressure, 1993.

M. J. Jiang, J. M. Konrad, and S. Leroueil, An efficient technique for generating homogeneous specimens for DEM studies, Computers and Geotechnics, vol.30, issue.7, pp.579-597, 2003.
DOI : 10.1016/S0266-352X(03)00064-8

T. Kanit, Notion of representative volume element for heterogeneous materials: statistical and numerical approach, 2003.
URL : https://hal.archives-ouvertes.fr/tel-00005751

A. R. Kansal, S. Torquato, and F. H. Stillinger, Diversity of order and densities in jammed hard-particle packings, Diversity of order and densities in jammed hard-particle packings, p.41109, 2002.
DOI : 10.1103/PhysRevE.66.041109

B. A. Khasainov, A. V. Attetkov, A. A. Borisov, P. Reports-c-/-c, . Of et al., Shock-wave initiation of porous energetic materials and visco-plastic model of hot spots, CHEMICAL, vol.15, pp.987-1062, 1996.

J. R. Klepaczko, Behavior of rock-like materials at high strain rates in compression, International Journal of Plasticity, vol.6, issue.4, pp.415-432, 1990.
DOI : 10.1016/0749-6419(90)90011-3

L. G. Koshigoe, R. L. Shoemaker, and E. Taylor, Specific heat of HMX, Specific heat of HMX, pp.1600-1601, 1984.
DOI : 10.2514/3.8823

K. Mohan, V. , J. E. Field, and G. M. Swallowe, Effects of Physical Inhomogeneities on the Impact Sensitivity of Solid Explosives: A High-Speed Photographic Study, Combustion Science and Technology, vol.40, pp.5-6, 1984.

V. D. Le, Modélisation et identification du comportement plastique viscoélastique endommageable d'un matériau agrégataire, 2007.

V. D. Le, M. Gratton, M. Caliez, A. Frachon, and D. Picart, Experimental mechanical characterization of plastic-bonded explosives, Journal of Materials Science, vol.25, issue.21, pp.45-5802, 2010.
DOI : 10.1007/s10853-010-4655-5

J. Lee and G. L. Fenves, A plastic-damage concrete model for earthquake analysis of dams, Earthquake Engineering & Structural Dynamics, vol.27, issue.9, pp.937-956, 1998.
DOI : 10.1002/(SICI)1096-9845(199809)27:9<937::AID-EQE764>3.0.CO;2-5

V. I. Levitas, B. F. Henson, L. B. Smilowitz, and B. W. Asay, Solid???Solid Phase Transformation via Internal Stress-induced Virtual Melting, Significantly below the Melting Temperature. Application to HMX Energetic Crystal, The Journal of Physical Chemistry B, vol.110, issue.20, pp.110-10105, 2006.
DOI : 10.1021/jp057438b

M. Li, W. Tan, B. Kang, R. Xu, and W. Tang, The Elastic Modulus of ??-HMX Crystals Determined by Nanoindentation, Propellants, Explosives, Pyrotechnics, vol.12, issue.4, pp.35-379, 2010.
DOI : 10.1002/prep.201000018

X. Lin and T. T. Ng, A three-dimensional discrete element model using arrays of ellipsoids, G??otechnique, vol.47, issue.2, pp.47-319, 1997.
DOI : 10.1680/geot.1997.47.2.319

A. Linan and F. A. Williams, Theory of Ignition of a Reactive Solid by Constant Energy Flux, Combustion Science and Technology, vol.2, issue.2, pp.91-98, 1971.
DOI : 10.1080/00102207108952276

B. D. Lubachevsky and F. H. Stillinger, Geometric properties of random disk packings, Journal of Statistical Physics, vol.58, issue.1, pp.5-6, 1990.
DOI : 10.1007/BF01025983

J. Lubliner, J. Oliver, S. Oller, and E. Oñate, A plastic-damage model for concrete, International Journal of Solids and Structures, vol.25, issue.3, pp.299-326, 1989.
DOI : 10.1016/0020-7683(89)90050-4

X. Ma, F. Zhao, G. Ji, W. Zhu, J. Xiao et al., Computational study of structure and performance of four constituents HMX-based composite material, Journal of Molecular Structure: THEOCHEM, vol.851, issue.1-3, pp.1-3, 2008.
DOI : 10.1016/j.theochem.2007.10.044

L. E. Malvern, D. A. Jenkinds, T. Tang, and S. Mclure, Dynamic testing of laterally confined concrete, Micromechanics of failure of quasi-brittle materials, pp.343-352, 1991.

S. Mcdonald, J. F. Millett, N. Bourne, K. Bennett, A. Milne et al., The shock response, simulation and microstructural determination of a model composite material, Journal of Materials Science, vol.51, issue.23, pp.42-9671, 2007.
DOI : 10.1007/s10853-007-1961-7

R. R. Mcguire and C. M. Tarver, Chemical-decomposition models for the thermal explosion of confined HMX, TATB, RDX, and TNT explosives, Medium: ED; Size: Pages: 9 pp, 1981.

R. Menikoff, Detonation waves in PBX 9501, Combustion Theory and Modelling, pp.1003-1021, 2006.

R. Menikoff and T. D. Sewell, Constituent properties of HMX needed for mesoscale simulations, Combustion Theory and Modelling, pp.103-125, 2002.

R. Menikoff, J. J. Dick, and D. E. Hooks, Analysis of wave profiles for single-crystal cyclotetramethylene tetranitramine, Journal of Applied Physics, vol.97, issue.2, pp.23529-023526, 2005.
DOI : 10.1063/1.1828602

C. S. Meyer, Development of Geomaterial Parameters for Numerical Simulations Using the Holmquist-Johnson-Cook Constitutive Model for ConcreteRep, 2011.

A. L. Nichols and C. M. Tarver, A Statistical Hot Spot Reactive Flow Model for Shock Initiation and Detonation of Solid High Explosives, 12th International Detonation Symposium, 2002.

G. T. Nolan and P. E. Kavanagh, Computer simulation of random packing of hard spheres, Powder Technology, vol.72, issue.2, pp.149-155, 1992.
DOI : 10.1016/0032-5910(92)88021-9

B. Olinger, Los Alamos Shock Wave Profile Data, 1982.

B. Olinger, B. Roof, and H. H. Cady, The linear and volume compression of - HMX and RDX to 9 GPa, Symposium international sur le comportement des milieux denses sous hautes pressions dynamiques, 1978.

S. J. Palmer and J. E. Field, The Deformation and Fracture of beta-HMX, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, pp.383-399, 1785.

Y. Partom, A threshold criterion for impact ignition, 2002.

C. Periasamy and H. Tippur, Dynamic Response of Homogeneous and Functionally Graded Foams When Subjected to Transient Loading by a Square Punch, Dynamic Behavior of Materials, pp.213-215, 2011.
DOI : 10.1007/978-1-4614-0216-9_31

D. Picart and J. L. Brigolle, Characterization of the viscoelastic behaviour of a plastic-bonded explosive, Materials Science and Engineering: A, vol.527, issue.29-30, pp.29-30, 2010.
DOI : 10.1016/j.msea.2010.08.057

D. Picart and E. Bouton, Non-shock ignition of HMX-based high explosives : thermo-mechanical numerical study, 14th Int. Detonation Symp, pp.191-198, 2010.

D. Picart, M. Biessy, and J. L. Brigolle, Intermediate strain rate characterization of a plastic-bonded explosive composition, DYMAT 2009, 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, pp.343-348, 2009.
DOI : 10.1051/dymat/2009048

D. Picart, D. Damiani, and M. Doucet, The reverse edge-on impact test: A small scale experiment for non-shock ignition studies, AIP Conference Proceedings, issue.1, pp.1426-497, 2012.
DOI : 10.1063/1.3686326

M. Polanco-loria, O. S. Hopperstad, T. Børvik, and T. Berstad, Numerical predictions of ballistic limits for concrete slabs using a modified version of the HJC concrete model, International Journal of Impact Engineering, vol.35, issue.5, pp.290-303, 2008.
DOI : 10.1016/j.ijimpeng.2007.03.001

L. Qiu, W. Zhu, J. Xiao, and H. Xiao, Theoretical Studies of Solid Bicyclo-HMX:?? Effects of Hydrostatic Pressure and Temperature, The Journal of Physical Chemistry B, vol.112, issue.13, pp.3882-3893, 2008.
DOI : 10.1021/jp070863f

J. E. Reaugh, Multi-scale computer simulations to study the reaction zone of solid explosives, 13th Int. Detonation Symp, pp.1276-1285, 2006.

H. W. Reinhardt, H. A. Körmeling, and A. J. Zielinski, The split Hopkinson bar, a versatile tool for the impact testing of concrete, Materials and Structures, vol.6, issue.No. 85, pp.55-63, 1986.
DOI : 10.1007/BF02472311

P. Roberts, Impact Ignition of Explosives, 1993.

C. Rubio-gonzalez and J. J. Mason, Experimental investigation of dynamic punch tests on isotropic and composite materials, Experimental Mechanics, vol.42, issue.2, pp.129-139, 2001.
DOI : 10.1007/BF02323188

H. Sakaguchi and A. , Murakami Initial Packing in Discrete Element Modeling, Discrete Element Methods, pp.104-106

G. Bennett, Low amplitude insult project: Structural analysis and prediction of low order reaction, pp.111-118, 1998.

H. Senf, E. Strassburger, and H. Rothenhäusler, A Study of Damage during Impact in Zerodur, Le Journal de Physique IV, vol.07, issue.C3, pp.7-10, 1997.
DOI : 10.1051/jp4:19973171

URL : https://hal.archives-ouvertes.fr/jpa-00255463

T. D. Sewell, R. Menikoff, D. Bedrov, and G. D. Smith, A molecular dynamics simulation study of elastic properties of HMX, The Journal of Chemical Physics, vol.119, issue.14, pp.7417-7426, 2003.
DOI : 10.1063/1.1599273

J. Sharma, R. W. Armstrong, W. L. Elban, C. S. Coffey, and H. W. Sandusky, Nanofractography of shocked RDX explosive crystals with atomic force microscopy, Applied Physics Letters, vol.78, issue.4, pp.457-459, 2001.
DOI : 10.1063/1.1342046

C. B. Skidmore, D. S. Phillips, P. M. Howe, J. T. Mang, and J. A. Romereo, The evolution of microstructural changes in pressed HMX explosives, 11th Int. Detonation Symp, pp.556-564, 1998.
DOI : 10.2172/334323

D. C. Sorescu, B. M. Rice, and D. L. Thompson, Theoretical Studies of the Hydrostatic Compression of RDX, HMX, HNIW, and PETN Crystals, Theoretical Studies of the Hydrostatic Compression of RDX, HMX, HNIW, and PETN Crystals, pp.6783-6790, 1999.
DOI : 10.1021/jp991202o

L. L. Stevens and C. J. Eckhardt, The elastic constants and related properties of ??-HMX determined by Brillouin scattering, The Journal of Chemical Physics, vol.122, issue.17, pp.174701-174708, 2005.
DOI : 10.1063/1.1883627

L. L. Stevens, D. E. Hooks, and A. Migliori, A comparative evaluation of elasticity in pentaerythritol tetranitrate using Brillouin scattering and resonant ultrasound spectroscopy, Journal of Applied Physics, vol.108, issue.5, pp.53512-053514, 2010.
DOI : 10.1063/1.3467523

D. Stoyan, Models of random systems of non-intersecting spheres, Prague Stochastics'98, pp.543-547, 1998.

E. Strassburger, Visualization of Impact Damage in Ceramics Using the Edge-On Impact Technique, International Journal of Applied Ceramic Technology, vol.21, issue.4, pp.235-242, 2004.
DOI : 10.1111/j.1744-7402.2004.tb00175.x

E. Strassburger, B. Lexow, O. Beffort, and R. Jeanquartier, -Al ceramic metal composites under projectile impact, Le Journal de Physique IV, vol.10, issue.PR9, pp.9-605, 2000.
DOI : 10.1051/jp4:20009101

URL : https://hal.archives-ouvertes.fr/in2p3-00018981

E. Strassburger, P. Patel, J. W. Mccauley, and D. W. Templeton, High-Speed Photographic Study of Wave Propagation and Impact Damage in Fused Silica and AlON Using the Edge-On Impact (EOI) Method, AIP Conference Proceedings, pp.892-895, 2006.
DOI : 10.1063/1.2263465

B. Sun, J. M. Winey, Y. M. Gupta, and D. E. Hooks, Determination of second-order elastic constants of cyclotetramethylene tetranitramine (??-HMX) using impulsive stimulated thermal scattering, Journal of Applied Physics, vol.106, issue.5, pp.53505-053505, 2009.
DOI : 10.1063/1.3211927

G. M. Swallowe, J. E. Field, and L. A. Horn, Measurements of transient high temperatures during the deformation of polymers, Journal of Materials Science, vol.382, issue.11, pp.4089-4096, 1986.
DOI : 10.1007/BF02431656

C. M. Tarver, Chemical Kinetic Modeling of HMX and TATB Laser Ignition Tests, Journal of Energetic Materials, vol.22, issue.2, pp.93-107, 2004.
DOI : 10.1080/713712998

C. M. Tarver and T. D. Tran, Thermal decomposition models for HMX-based plastic bonded explosives, Combustion and Flame, vol.137, issue.1-2, pp.50-62, 2004.
DOI : 10.1016/j.combustflame.2004.01.002

H. Trumel, P. Lambert, and R. Belmas, Mesoscopic investigations of the deformation and initiation mechanisms of a HMX-based pressed composition, 14th Int. Detonation Symp, pp.1096-1105, 2010.

H. Trumel, P. Lambert, G. Vivier, and Y. Sadou, Toward physically-based explosive modelling: meso-scale investigations, Materials under extreme loadings, 2010.
DOI : 10.1002/9781118622612.ch9

. Switzer, Experimental and modeling studies of crush, puncture, and perforation scenarios in the Steven impact test, 12th Int. Detonation Symp, pp.131-139, 2002.

J. Vial, D. Picart, P. Bailly, and F. Delvare, Numerical and experimental study of the plasticity of HMX during a reverse edge-on impact test, Modelling and Simulation in, Materials Science and Engineering, vol.21, issue.4, p.45006, 2013.

J. Vial, P. Bailly, F. Delvare, M. Biessy, and D. Picart, Experimental investigation of an aggregate material behavior under confinement at high strain rate, EPJ Web of Conferences, vol.6, p.39006, 2010.
DOI : 10.1051/epjconf/20100639006

URL : https://hal.archives-ouvertes.fr/hal-00605986

S. M. Walley, D. Xing, and J. E. Field, Mechanical Properties of Three Transparent Amorphous Polymers in Compression at a Very High Rate of Strain, Impact and Dynamic Fracture of Polymers and Composites -ESIS 19, pp.289-303, 1995.

Y. Wang, Y. Zhou, and Y. Xia, A constitutive description of tensile behavior for brass over a wide range of strain rates, Materials Science and Engineering: A, vol.372, issue.1-2, pp.186-190, 2004.
DOI : 10.1016/j.msea.2003.12.009

D. Wiegand, The influence of confinement on the mechanical properties of energetic materials, AIP Conference Proceedings, pp.675-678, 2000.
DOI : 10.1063/1.1303563

D. Wiegand and B. Reddingius, Mechanical Properties of Plastic Bonded Composites as a Function of Hydrostatic Pressure, AIP Conference Proceedings, pp.812-815, 2004.
DOI : 10.1063/1.1780361

D. Wiegand and B. Reddingius, The strengthening of energetic materials under pressure, 24th Army Sci, Conf, 2004.

D. M. Williamson, Deformation and fracture of a polymer bonded explosive and its simulants, 2006.

R. E. Winter and J. E. Field, The Role of Localized Plastic Flow in the Impact Initiation of Explosives, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.343, issue.1634, pp.343-399, 1634.
DOI : 10.1098/rspa.1975.0074

Y. Wu and F. Huang, A microscopic model for predicting hot-spot ignition of granular energetic crystals in response to drop-weight impacts, Mechanics of Materials, vol.43, issue.12, pp.43-835, 2011.
DOI : 10.1016/j.mechmat.2011.08.004

J. Xiao, W. Zhu, X. Ma, H. Xiao, H. Huang et al., A novel model for the molecular dynamics simulation study on mechanical properties of HMX/F2311 polymerbonded explosive, Molecular Simulation, issue.8, pp.34-775, 2008.

J. Xiao, H. Huang, J. Li, H. Zhang, W. Zhu et al., A molecular dynamics study of interface interactions and mechanical properties of HMX-based PBXs with PEG and HTPB, Journal of Molecular Structure: THEOCHEM, vol.851, issue.1-3, pp.1-3, 2008.
DOI : 10.1016/j.theochem.2007.11.021

C. Yoo and H. Cynn, Equation of state, phase transition, decomposition of beta-HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) at high pressures, The Journal of Chemical Physics, issue.22, pp.111-10229, 1999.

J. M. Zaug, Elastic Constants of -HMX and Tantalum, Equations of State of Supercritical Fluids and fluid Mixtures and Thermal Transport Determinations, 11th Int. Detonation Symp, pp.498-509, 1998.

F. J. Zerilli and M. M. Kuklja, Ab Initio Equation of State of the Organic Molecular Crystal: -Octahydro, The Journal of Physical Chemistry A, issue.16, pp.114-5372, 2010.

Z. X. Zhang, X. Y. Hu, and K. D. Scott, A discrete numerical approach for modeling face stability in slurry shield tunnelling in soft soils, Computers and Geotechnics, vol.38, issue.1, pp.94-104, 2011.
DOI : 10.1016/j.compgeo.2010.10.011

H. Zhao and G. Gary, On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains, International Journal of Solids and Structures, vol.33, issue.23, pp.33-3363, 1996.
DOI : 10.1016/0020-7683(95)00186-7

URL : https://hal.archives-ouvertes.fr/hal-00111561

Q. H. Zuo and J. K. Dienes, On the stability of penny-shaped cracks with friction: the five types of brittle behavior, International Journal of Solids and Structures, vol.42, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ijsolstr.2004.08.003

Q. H. Zuo, F. L. Addessio, J. K. Dienes, and M. W. Lewis, A rate-dependent damage model for brittle materials based on the dominant crack, International Journal of Solids and Structures, vol.43, issue.11-12, pp.11-12, 2006.
DOI : 10.1016/j.ijsolstr.2005.06.083