.. Essais-de-bipoinçonnement,-caractérisation-microstructurale, 73 V.1. Caractérisation des microstructures initiales, p.73

V. Dynamique-de-la-microstructure and .. , Evolution, p.76

V. 6. Conclusions and .. , 157 VII. Conclusions et perspectives, p.159

A. S. Hasebe-m and M. Y. Senuma-t, Thermodynamic calculation of solute carbon and nitrogen in Nb and Ti added extra-low carbon steels, ISIJ Intern, vol.34, issue.1, pp.9-16, 1994.

A. G. Sellars-c, . C. Bain-e, . H. Aborn-r, . J. Bailey, and . B. Hirsch-p, Static restoration processes in warm rolled interstitial free steel Chromium-Iron Phase Diagram, Metals Handbook, American Society for Metals The recrystallization process in some polycrystalline metals, BAS 59] BASINSKI Z.S. Thermally activated glide in FCC metals and its application to the theory of strain hardening, pp.895-891, 1948.

. A. Belyakov, . O. Kaibyshev-r, . J. Burke, and . Turnbull-d, Deformation mechanisms in a high-chromium ferritic steel: The Physics of Metals and Metallography Recrystallization and grain growth, Progress in Metal PhysicsCAH 56] CAHN J.W. Transformation kinetics during continuous rolling, pp.212-228, 1952.

. C. Chao-h, The mechanism of ridging in ferritic stainless steels, Trans. ASM, vol.60, pp.37-50

C. D. Zurob-h, . J. Brechet-y, . R. Hutchinson-c, H. R. Doherty, H. F. et al., Caractérisation du mécanisme de recristallisation dynamique continue Modelling discontinuous dynamic recrystallization using a physically based model nucleation Current issues in recrystallization: a review, Thèse, Ecole des Mines de Saint-Etienne, pp.5218-5228, 1997.

. Eva, . W. Evans-r, and . J. Scharning-p, Systematic errors in flow stress measurement for the hot plane strain compression test, Mat. Sci. Technol, vol.20, pp.431-440, 2004.

F. H. Métallurgie-du-laminage-À-chaud, . F. Ashby-m, . Fujita-n, . Ohmura-k, . Kikuchi-m et al., Deformation mechanism maps, Effect of Nb on high-temperature properties for ferritic stainless steel, Scripta Mater, pp.705-710, 1982.

F. H. Tsuge-s, C. Effect-of, and T. , Nb on recrystallization behavior after hot deformation, 16% Cr ferritic stainless steel, Proceedings of the 4 th international conference on Recrystallization and Related Phenomena The Japan Institute of MetalsGAU 09] GAUDOUT B. Modélisation des évolutions microstructurales et étude de la lubrification par film solide lors du filage à chaud d'alliages de Zirconium, pp.763-768, 1999.

G. Ph, T. J. , C. Th, and . Bacroix-b, Recristallisation dynamique d'aciers inoxydables austénitiques de haute pureté A quantitative analysis of the evolution of texture and stored energy during annealing of cold rolled copper, Thèse, Ecole des Mines de Saint-Etienne, pp.6359-6371, 2001.

G. G. Olson-g, The isotropic shear modulus of multicomponent Fe-base solid solutions, Acta Mater, vol.50, pp.2655-2675, 2002.

. Glover-g and . M. Sellars-c, Static recrystallization after hot deformation of ?? iron, Metallurgical Transactions, vol.17, issue.8, pp.2271-2280, 1972.
DOI : 10.1007/BF02643242

G. G. Sellars-c, Recovery and Recrystallization during High Temperature of alpha-iron, Metall. Mat. Trans. B, vol.4, pp.765-775, 1973.

G. S. Montheillet-f, H. M. Hillert-m-], and R. M. Sundman-b-hölscher, A model of continuous dynamic recrystallization On the theory of normal and abnormal grain growth, Acta Metall A treatment of the solute drag on moving grain boundaries and phase interfaces in binary alloys Rolling and recrystallization texture of bcc steels, HIN 06] HINTON J.S. Laboratory simulation of microstructural evolution in AISI 430 Ferritic Stainless Steel during the Steckel Mill Process Thèse, pp.2685-2699, 1965.

H. F. Hutchinson-c, Z. H. , and S. C. Brechet-y, The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels, Scripta Materialia, vol.59, issue.6, pp.635-637, 2004.
DOI : 10.1016/j.scriptamat.2008.05.036

H. G. Kan-08-]-kang-h and P. S. , Effect of lubrification during hot rolling on the evolution of trough-thickness textures in 18%Cr ferritic stainless steel, Steel Res. Int, vol.79, pp.489-496, 2008.

K. U. Laasraoui and J. J. , Laws for work-hardening and low-temperature creep, Prediction of steel flow stresses at high temperatures and strain rates, pp.76-85, 1976.

L. M. Mahon-g, R. B. , L. A. Palmiere-e, . M. Sellars-c, W. M. Van-der et al., Measurement of flow stress in hot plane strain compression tests A quantitative theory of grain boundary motion and recrystallization in metals in the presence of impurities, Acta Metall, vol.23, issue.5, pp.85-118, 1957.

H. J. Mcqueen, S. J. , and R. N. , Evolution of flow stress in aluminium during ultra-high straining at elevated temperatures. Part II, Philosophical Magazine A, vol.95, issue.4, pp.473-485, 1989.
DOI : 10.1016/0025-5416(84)90144-7

M. H. Kocks-u, . V. Mehtonen-s, . P. Karjalainen-l, and . A. Porter-d, Kinetics of flow and strain-hardening Hot deformation behavior and microstructure evolution of a stabilized high-Cr ferritic stainless steel, Acta Metall. Mat. Sci. Eng. A, vol.29, pp.1865-1875, 1981.

R. R. and J. J. Hook-r, Overview on basic types of hot rolling textures of steels Cold rolling and annealing textures in low carbon and extra low carbon steels, Int. Mater. Rev, vol.74, issue.39, pp.327-337, 1994.

R. W. Rea, Dislocations in metals, 1953.

R. C. Blain-p-sakai, M. M. Saito-y, and . Kawasaki-k, Evolution de la structure de l'acier sous l'effet de la déformation plastique à chaud, Inhomogenous texture formation in high speed hot rolling of ferritic stainless steel, pp.285-300, 1959.

S. S. Sandström, . Lagnebordg, . M. Sellars-c, and . J. Tegart-w, Effect of solidification structure and thermomecanical processing on microstructure and texture of ferritic stainless steels, Thermec, Part 1 A controlling factor for dynamic recrystallization, La relation entre la résistance et la structure dans la deformation à chaud, pp.1379-387, 1975.

S. C. Hutchinson-c and . Brechet-y, The effect of Nb on te recrystallization and grain growth of ultra-high-purity ?-Fe: a combinatorial approach, The effect of texture on ridging of ferritic stainless steelSMI 48] SMITH C.S. & ZENER C. Grains, phases and interfaces: an interpretation of microstructure, pp.4693-4706, 1948.

. H. Takechi and . Kato-h, The mechanism of ridging phenomenon in 17% chromium stainless steel sheets, Trans JIM, pp.31-717, 1967.

. Tod, . I. Toda-carabello, and . Bristoxe-p, A molecular dynamics study of grain boundary free energies, migration mechanisms and mobilities in a bcc Fe-20Cr alloy, Acta Mater, vol.60, pp.1116-1128

V. H. Furu-t and Ø. R. , Modelling recrystallization after hot deformation of Aluminium, Acta Mater, vol.44, pp.4463-4473, 1996.

V. M. Brechet-y and . Guyot-p, Recovery of AlMg alloys: flox stress and strain hardening property, Acta Mater, vol.47, issue.12, pp.127-134, 1997.

W. W. , H. A. , B. T. Brisset-f, and . Prenelle-r, Reinforcement of the Cube texture during recrystallization of a 1050 Al alloy partially recrystallized and 10% cold-rolled, WRI 72] WRIGHT R. Anisotropic plastic flow in ferritic stainless steel and the roping phenomenon, pp.83-91, 1972.

Y. Y. Ozaki-y and . Kato-y, Proceedings of Thermomechanical processing of microalloyed austenite Development of ferritic stainless steel sheets with excellent deep drawability by {111} recrystallization texture control, JSAE Review, vol.24, pp.613-483, 1981.

Z. C. Zen and . H. Hollomon-j, Effect of strain rate on the plastic flow of steel, Applied Physics, vol.15, pp.22-32, 1944.

Z. H. Brechet-y and . Dunlop, Quantitative criterion for recrystallization nucleation in single-phase alloys : prediction of critical strain and incubation times, Acta Mater, vol.54, pp.3983-3990