C. Ménil, H. C. Lucat, F. Lucat, P. H. Ménil, P. Debéda et al., Debéda Microelectronics International 13 P2? The thick film route to selective gas sensors P5? Methane sensing : from sensitive thick?film to a reliable selective device, 415?420 P3? Capteurs en couches épaisses sélectifs au méthane H.Debéda, 481?486 P4? Thick film pellistor array with a neural network patterned post?treatment H. Debéda, D. Rebière, J. Pistré, F. Ménil Sensors and actuators, B26?27 99?110 P6? Development of an intelligent methane detector H. Debéda, L. Dulau, Ph. Dondon, F. Ménil, C. Lucat, P. Massok Sensors and Actuators B, pp.2971-2974, 1995.

L. , H. Debéda, T. V. Freyhold, J. Mohr, U. Wallrabe et al., Septembre 1999 P8? Nitrogen monoxide detection with a planar spinel?coated amperometric sensor V P10? A simplified model for evaluating the electrical resistance of a zirconia substrate with co?planar electrodes F, P7. Development of miniaturized piezoelectric actuators for optical applications realized using Industrial ceramics Testing and improvement of micro?optical?switch dynamics C. Rembe, H. Aschemann, S. Wiesche, E.P. Hofer, H. Debéda, J. Mohr, U. Wallrabe Microelectronics Reliability, pp.258-26334, 2001.

F. Ménil, B. Ould-daddah, P. Tardy, H. Debéda, and C. Lucat, 407?423 P14? Planar LiSICON?based potentiometric CO 2 sensors : influence of the working and reference electrodes relative size on the sensing properties, 695?707 P15? Influence of the densification parameters on screen?printed component properties H. Debéda, C. Lucat, F. Ménil Journal of European Ceramic Society 2115?2119 P16? Screen?printed thick?films : from materials to functional devices F. Ménil, H. Debéda 2105?2113 P17? Screen?printed varistors: new strategy for high non?linear coefficient, pp.13-15, 2005.

C. Lucat, P. Ginet, C. Castille, H. Debéda, F. Ménil et al., Microelectronics Reliability 872?875 P19? Evaluation of insulated gate bipolar transistor protection with ZnO thick films varistors, 1133?1137 P22? Phosphor screen?printing for white?light LED emission J.Burgin, V.Jubera, H.Debéda, B.Glorieux, A.Garcia, C.Lucat, pp.2235-2241, 2008.

P. Martin, H. Debéda, C. Lucat, F. Ménil, P. Tardy et al., thick?films : from materials to functionnal devices F oral C18? Asymmetry of the response and recovery curves of exhaust gas sensors, correlated to the non? linearity of the operating principle Francis Ménil, Claude Lucat Déc 2005, oral C19? Influence of the electrode composition on the non?linear electrical properties of thick film varistors C Juin 2006, oral C20? New screen?printed MEMS : study of a thermal microactuator P oral C21? Devices based on free standing thick?films made with a new sacrificial layer process, 36 th International Symposium on Microelectronics Hélène Debéda, Pascal Tardy Sensact 2005 (Paris) Ménil 31 Int. Conf. IMAPS Poland, Rzeszow?Krasiczyn, 23?26 Sept 2007 C22? Potentialities of piezoresistive cantilever force sensors based on free?standing thick?films H. Debéda C23? Varistances sérigraphiées à forte tension de seuil pour la protection d'IGBT H. Debéda, M.P. Martin?Stempin, C. Lucat, F. Ménil, S. Azzopardi, EPF, XII ième Conférence Electronique de Puissance du Futur oral C24? Improvement of standard screen?printing process for new free?standing materials implemented in sensors and actuators, 2003.

C. Lucat, H. Debéda, P. Ginet, J. , T. Tétin et al., oral C26? Sensor Application Using Longitudinal Mode of Screen?Printed PZT Cantilever C. Castille, I, C27? Determination of Young's Moduli for free?standing screen?printed thick film layers used in MEMS, 2008.

H. Debéda, F. Ménil, C. Lucat, P. M. Journées, C. et al., Réactivité de surface et capteursMatériaux et composants de détection, S1? Détection sélective du méthane en milieu domestique par des dispositifs Bi ou Tri?capteurs en couches épaisses Rennes, mars 1995 S2? Capteurs en couches épaisses sélectifs au méthane S3? Adaptation de la compacité des couches sérigraphiées aux propriétés recherchées H. Debéda, C. Lucat, F. Ménil Journée SEE « Couches épaisses pour électrocéramiques S3? Capteurs et systèmes de mesure pour le médical, l'agro?alimentaire H. Debéda, Y. Danto, C. Dejous, C. Lucat, F. Ménil, C. Pellet, J. Pistré, D. Rebière, Congrès de Métrologie, 1995.

C. Lucat, C. Castille, P. Ginet, H. Debéda, F. H. Debéda et al., S11? Cantilever force sensors based on free standing thick?films Sousse, 17?19 mars 2008 S13? Microsystems based on free?standing screen?printed thick?films C S16? Microcapteurs de force (mN) à base de micropoutres sérigraphiées: screen?printing method for phosphors deposition V, 6ème Colloque Sur Enseignement des Technologies et des Sciences de l'Information (CETSIS 2007) Bordeaux S10? Toward hybrid MEMS based on free?standing thick?films S14? Free? standing thick?films for Microsystems 12ème Journées Nationales du Réseau Doctoral de Microélectronique 2009 Lyon S17? Utilisation de micropoutres sans couche sensible pour la détection de gaz S. Tetin, B. Caillard, F. Menil, H. Debeda, C. Lucat, C. Pellet, I. Dufour 12ème Journées Nationales du Réseau Doctoral de Microélectronique, pp.17-19, 2007.

H. Debéda, I. Dufour, C. Pellet, C. Debéda, R. Lakhmi et al., S21? Association of screen?printing process and sacrificial layer for free?standing PZT thick?films: application to energy harvesting? Lucat Journées Récupération d'énergie S22? Détection de gaz à l'aide de micropoutres organiques et inorganiques micro?structurées par sérigraphie, 8èmes Journées Maghreb?Europe sur les Matériaux et Applications aux Dispositifs et Capteurs, 2011.

H. Debéda, R. Lakhmi, P. Clément, E. Llobet, M. P. Pina et al., Urbiztondo, 6 ièmes Journées Franco?espagnoles IBERNAM?CMC2, Micro and nanosensors and microsystems, 22?23 Novembre 2012, Marseille S24? Stage de microassemblage Pôle CNFM de Bordeaux / IMS Bordeaux : réalisation de circuits hybrides et capteurs, S23? VOC detection with screen?printed piezoelectric cantilevers coated with PEUT and nanoporous sensitive layers. Comparison with silicon cantilevers Claude Lucat CFSAM3 "3rd China?French Symposium on Advanced Materials 17?20 Mars, Bordeaux S26? Faisabilité de Microcéramiques Piézoélectriques En Couches Epaisses Pour La Récupération D'Energie Mécanique et/ou Thermique Hélène Debéda Gaël Sebald 3 èmes Journées Nationales sur la Récupération et le Stockage d'Energie (JNRSE'2013) pour l'alimentation des microsystèmes autonomes, 27?28 Mars 2013 S27? Poutres piézoélectriques sérigraphiées fonctionnalisées pour la détection de benzène Hélène Debéda, Pierrick Clément, E. Llobet, C. Lucat 1. Development of an intelligent methane detector H. Debéda, L. Dulau, Ph. Dondon, F. Ménil, C. Lucat, P. Massok Sensors and Actuators B, pp.1-3, 1997.

R. Lakhmi, H. Debéda, and I. Dufour, Force Sensors Based on Screen-Printed Cantilevers, IEEE Sensors Journal, vol.10, issue.6, pp.1133-1137, 2010.
DOI : 10.1109/JSEN.2010.2040387

URL : https://hal.archives-ouvertes.fr/hal-00453483

R. Lakhmi, H. Debéda, M. Maglione, I. Dufour, and C. Lucat, Study of Screen-Printed PZT Cantilevers Both Self-Actuated and Self-Read-Out, press DOI:10.1111/ijac.12006 Sensors and Actuators B, pp.44-248, 1997.
DOI : 10.1111/ijac.12006

URL : https://hal.archives-ouvertes.fr/hal-00725671

E. M. Logothetis, M. D. Hurley, W. J. Kaiser, and Y. C. Yao, Selective methane sensors, Proc. 2nd Int. Meeting on Chemical Sensors, pp.175-178, 1986.

H. Debeda, P. Massok, C. Lucat, F. Menil, and J. L. Ausouturier, Methane sensing: from sensitive thick films to a reliable selective device, Measurement Science and Technology, vol.8, issue.1, 1996.
DOI : 10.1088/0957-0233/8/1/014

H. Debeda, D. Rebiere, J. Pistre, and F. , Thick film pellistor array with a neural network post-treatment, Sensors and Actuators B: Chemical, vol.27, issue.1-3, pp.297-300, 1995.
DOI : 10.1016/0925-4005(94)01605-H

URL : https://hal.archives-ouvertes.fr/hal-00258759

P. Dutronc, F. Menil, M. Loesch, and L. , Combes, A new approach to selectivity in methane sensing, Sensors and Actuators B, vol.1516, pp.24-31, 1993.

U. Dibbern, Piezoelectric actuators in multilayer technique, pp.114-118, 1994.

M. J. Verkerk, Multilayer piezoelectric benders Actuator 94, pp.175-178, 1994.

G. Haertling and R. C. Buchanan, Ceramic materials for electronics, Processing, Properties and Applications ch. 3 of Piezoelectric and Electrooptic Ceramics

A. Schönecker, PZT thick films for microsystems-recent trends and issues, Micro Materials 97, p.101

. Ph, Piezoelectric cantilevers beams actuated by PZT sol-gel thin films, Sensors and Actuators, vol.54, pp.530-535, 1996.

M. Mescher, Piezoelectric lead-zirconate-titanate actuator films for microelectromechanical systems applications, Proceedings IEEE Micro Electro Mechanical Systems. 1995, pp.261-266, 1995.
DOI : 10.1109/MEMSYS.1995.472537

J. Mohr, Movable Microstructures Manufactured by the LIGA Process as Basic Elements for Microsystems, Microsystem Technologies, H. Reichl, pp.529-537, 1990.
DOI : 10.1007/978-3-642-45678-7_74

H. Debéda, Fully batch fabricated LIGA actuators integrated on piezoelectric ceramic substrates, Actuator 98, pp.54-57, 1998.

J. Wengelink, Miniaturized piezoelectric fiber optical attenuator realized using LIGA technology, OPTO 98, 3rd Int. Congr. Exhibition on Optoelectronics, Optical Sensors and Measuring Systems, pp.133-136, 1998.

T. V. Freyhold, Miniaturized piezo electric chopper for fiber optical multimode applications realized using LIGA-technology, 1998 IEEE/LEOS Summer Topical Meeting. Digest. Broadband Optical Networks and Technologies: An Emerging Reality. Optical MEMS. Smart Pixels. Organic Optics and Optoelectronics (Cat. No.98TH8369), pp.75-76, 1998.
DOI : 10.1109/LEOSST.1998.689733

H. Debéda, P. Massok, C. Lucat, F. Ménil, and J. L. Aucouturier, Methane sensing: from sensitive thick films to a reliable selective device, Measurement Science and Technology, vol.8, issue.1, pp.99-110, 1997.
DOI : 10.1088/0957-0233/8/1/014

S. Gouverneur, C. Lucat, F. Ménil, and J. L. Aucouturier, New densification process of thick films, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.16, issue.5, pp.505-510, 1993.
DOI : 10.1109/33.239879

URL : https://hal.archives-ouvertes.fr/hal-00196231

P. Dutronc, Conception réalisation et optimisation de capteurs de gaz sélectifssélectifs`sélectifsà base de couches sérigraphiées d'oxydes semi-conducteurs

J. S. Cauhapé, C. Lucat, C. Bayle, F. Ménil, and J. Portier, Role of the mineral binder in the sensing properties of screen-printed layers of semiconductor oxides Sr 1?y Ca y FeO 3?x

H. Debéda, D. Rebì-ere, J. Pistré, and F. Ménil, Thick film pellistor array with a neural network post-treatment, Sensors and Actuators B: Chemical, vol.27, issue.1-3, pp.297-300, 1995.
DOI : 10.1016/0925-4005(94)01605-H

W. F. Chu, V. Leonhard, H. Erdmann, and M. Ilgenstein, Thick-film chemical sensors, Sensors and Actuators B: Chemical, vol.4, issue.3-4, pp.321-324, 1991.
DOI : 10.1016/0925-4005(91)80130-C

C. Lucat, B. Maire, D. Navarro, J. Salardenne, J. Chambre et al., Elaboration de varistances basse tension sérigraphiées: corrélations entre les propriétéspropriétés´propriétésélectriques et physico-chimiques, Proc. Journées SEE Mise au point d'une nouvelle méthode de densification de couchesépaissescouches´couchesépaisses. Application aux composants varistances , ferroélectriques et capteurs, 1985.

C. Lucat, R. Von-der-mühll, F. Ménil, and J. L. Aucouturier, CouchesépaissesCouches´Couchesépaisses densifiées. Application aux capteurs pyroélectriques, Proc. Journées SEE " Matériaux et composants piezo-pyroferroélectriques, 1996.

O. M. Rachidi, C. Lucat, and F. Ménil, New metallized alumina substrates for hybrid circuits, Proceedings of Ninth International Conference on Modern Materials and Technologies, CIMTEC 98, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00203772

K. Mochizuki, R. Sorita, H. Takashima, K. Nakamura, and G. Lu, Sensing characteristics of a zirconia-based CO sensor made by thick-film lamination, Sensors and Actuators B: Chemical, vol.77, issue.1-2, pp.190-195, 2001.
DOI : 10.1016/S0925-4005(01)00729-8

W. C. Maskell, Progress in the development of zirconia gas sensors, Solid State Ionics, vol.134, issue.1-2, pp.43-50, 2000.
DOI : 10.1016/S0167-2738(00)00712-8

D. Cicco, G. Morten, B. Dalmonego, D. Prudenziati, and M. , Pyroelectricity of PZT-based thick-films, Sensors and Actuators A: Physical, vol.76, issue.1-3, pp.409-415, 1999.
DOI : 10.1016/S0924-4247(99)00056-4

V. V. Srdic, R. P. Ormojan, and J. Seydel, Electrochemical performances of (La,Sr)CoO3 cathode for zirconia-based solid oxide fuel cells, Materials Science and Engineering: B, vol.116, issue.2, pp.119-124, 2005.
DOI : 10.1016/j.mseb.2004.07.075

Y. Miyachi, G. Sakai, K. Shimanoe, and N. Yamazoe, Fabrication of CO 2 sensor using NASICON thick-film, Sens. Actuators B, pp.93-250, 2003.

B. Rivì-ere, J. Viricelle, and C. Pijolat, Development of tin oxide material by screen-printing technology for gas sensor application, Proceedings of the IX International Meeting on Chemical Sensors, p.148, 2003.

L. Simon, S. Le-dren, and P. Gonnard, PZT and PT screen-printed thick films, Journal of the European Ceramic Society, vol.21, issue.10-11, pp.1441-1444, 2001.
DOI : 10.1016/S0955-2219(01)00037-1

K. Tanaka, T. Kubota, and Y. Sakabe, Preparation of piezoelectric Pb(Zr,Ti)O3???Pb(Zn1/3Nb2/3)O3 thick films on ZrO2 substrates using low-temperature firing, Sensors and Actuators A: Physical, vol.96, issue.2-3, pp.179-183, 2002.
DOI : 10.1016/S0924-4247(01)00791-9

J. C. Lin and C. Y. Wang, Effect of surface properties of silver powder on the sintering of its thick-film conductor, Materials Chemistry and Physics, vol.45, issue.3, pp.45-253, 1996.
DOI : 10.1016/0254-0584(96)80116-7

F. Ménil, H. Debéda, and C. Lucat, Screen-printed thick-films: From materials to functional devices, Journal of the European Ceramic Society, vol.25, issue.12, pp.2105-2118, 2005.
DOI : 10.1016/j.jeurceramsoc.2005.03.017

M. Prudenziati, Thick-film sensors. Handbook of sensors and actuators 1, 1994.

G. Stecher, Free supporting structures in thick-film technology: a substrate integrated sensor, Proceedings of 8th European microelectronics conference, pp.421-428, 1987.

C. Sippola and C. Ahn, A ceramic capacitive pressure microsensor with screenprinted diaphragm, Proceedings of the 4th IEEE conference on sensors 2005, pp.1271-1275

H. Birol, T. Maeder, and P. Ryser, Processing of graphite-based sacrificial layer for microfabrication of low temperature co-fired ceramics (LTCC), Sensors and Actuators A: Physical, vol.130, issue.131, pp.130-131560, 2006.
DOI : 10.1016/j.sna.2005.12.009

S. Pranonsatit and S. Lucyszyn, Self-assembled screen-printed microwave inductors, Electronics Letters, vol.41, issue.23, p.23, 2005.
DOI : 10.1049/el:20053167

M. Gongora-rubio, P. Espinoza-vallejos, L. Sola-lagunac, and J. Santiago-aviles, Overview of low temperature co-fired ceramics tape technology for meso-system technology (MsST), Sensors and Actuators A: Physical, vol.89, issue.3, pp.222-263, 2001.
DOI : 10.1016/S0924-4247(00)00554-9

C. Lucat, P. Ginet, F. Ménil, and H. Debéda, Préparation de microcomposants multicouches par la méthode de la couche épaisse sacrificielle

P. Ginet, C. Lucat, M. Budinger, and F. Ménil, New screen-printing thermal microactuator, 2007.

C. S. Microfluidique, Hermès Science Publication, 2004.

X. Li, D. Su, and Z. Zhang, A novel technique of microforce sensing and loading, Sensors and Actuators A: Physical, vol.153, issue.1, pp.13-23, 2009.
DOI : 10.1016/j.sna.2009.04.012

E. Peiner and L. Doering, Force calibration of stylus instruments using silicon microcantilevers, Sensors and Actuators A: Physical, vol.123, issue.124, pp.137-145, 2005.
DOI : 10.1016/j.sna.2005.02.031

N. V. Lavrik, M. J. Sepaniak, and P. G. Datskos, Cantilever transducers as a platform for chemical and biological sensors, Review of Scientific Instruments, vol.75, issue.7, pp.2229-2253, 2004.
DOI : 10.1063/1.1763252

K. M. Goeders, J. S. Colton, and L. A. Bottomley, Microcantilevers:?? Sensing Chemical Interactions via Mechanical Motion, Chemical Reviews, vol.108, issue.2, pp.522-542, 2008.
DOI : 10.1021/cr0681041

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.463.3404

A. Johansson, M. Calleja, P. A. Rasmussen, and A. Boisen, SU-8 cantilever sensor system with integrated readout, Sensors and Actuators A: Physical, vol.123, issue.124, pp.123-124, 2005.
DOI : 10.1016/j.sna.2005.03.025

J. Thaysen, A. D. Yalcinkaya, R. K. Vestergaard, S. Jensen, M. W. Mortensen et al., SU-8 based piezoresistive mechanical sensor, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266), pp.320-323, 2002.
DOI : 10.1109/MEMSYS.2002.984267

H. Birol, T. Maeder, C. Jacq, G. Corradini, M. Boers et al., Structuration and fabrication of sensors based on LTCC (Low temperature co-fired ceramic) technology, Key Eng. Mater, pp.336-338, 2007.

H. Birol, T. Maeder, I. Nadzeyka, M. Boers, and P. Ryser, Fabrication of a millinewton force sensor using low temperature co-fired ceramic (LTCC) technology, Sensors and Actuators A: Physical, vol.134, issue.2, pp.334-338, 2007.
DOI : 10.1016/j.sna.2006.05.025

C. Lucat, P. Ginet, and F. Ménil, New sacrificial layer based screenprinting process for free-standing thick-films applied to MEMS
URL : https://hal.archives-ouvertes.fr/hal-00164393

C. Castille, C. Lucat, P. Ginet, F. Ménil, and M. Maglione, Freestanding piezoelectric thick-films for MEMS applications, Proc. IMAPS/ACerS 4th Int. Conf. Ceramic Interconnect and Ceramic Microsystems Technologies, pp.82-86, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00322346

R. Perez, N. Chaillet, K. Domanski, P. Janus, and P. Grabiec, Fabrication, modeling and integration of a silicon technology force sensor in a piezoelectric micro-manipulator, Sensors and Actuators A: Physical, vol.128, issue.2, pp.367-375, 2006.
DOI : 10.1016/j.sna.2006.01.042

URL : https://hal.archives-ouvertes.fr/hal-00263937

S. P. Timoshenko, Strength of Materials, Part 1: Elementary Theory and Problems, pp.88-170, 1968.

C. H. Cho, Characterization of Young???s modulus of silicon versus temperature using a ???beam deflection??? method with a four-point bending fixture, 15] M. Prudenziati, Thick Film Sensors and Actuators, pp.538-545, 1994.
DOI : 10.1016/j.cap.2008.03.024

H. Debéda, I. Dufour, P. Ginet, and C. Lucat, Potentialities of piezoresistive cantilever force sensors based on free standing thick films, Proc. Mechatronics, 2008.

M. Haskard and K. Pitt, Thick Film Technology and Applications. Isle of Man, 1997.

A. A. Barlian, W. T. Park, J. R. Mallon, A. J. Rastegar, and B. L. Pruitt, Review: Semiconductor Piezoresistance for Microsystems, Proc. IEEE, pp.513-552, 2009.
DOI : 10.1109/JPROC.2009.2013612

R. Lakhmi, H. Debéda, I. Dufour, and C. Lucat, Determination of Young's moduli for free-standing screen-printed thick film layers used in MEMS, Proc. 20th Workshop on Micromachining, Micro Mechanics and Micro Systems, pp.214-217, 2009.

P. R. Wilkinson, W. S. Klug, B. Van-leer, and J. K. Gimzewski, Nanomechanical properties of piezoresistive cantilevers: Theory and experiment, Journal of Applied Physics, vol.104, issue.10, 2008.
DOI : 10.1063/1.3018944

J. A. Harley and T. W. Kenny, High-sensitivity piezoresistive cantilevers under 1000 ?? thick, Applied Physics Letters, vol.75, issue.2, 1999.
DOI : 10.1063/1.124350

H. Debeda, I. Dufour, C. L. Université-de-bordeaux, I. , U. S. Dohn et al., Cantilever- Like Micromechanical Sensors, Rep. Prog. Phys, vol.521830, pp.74-036101, 2011.

M. Sepaniak, P. Datskos, N. Lavrik, and C. Tipple, Microcantilever Transducers: A New Approach in Sensor Technology, Anal. Chem, pp.74-56, 2002.

K. Goeders, J. Colton, and L. Bottomley, Microcantilevers:?? Sensing Chemical Interactions via Mechanical Motion, Chemical Reviews, vol.108, issue.2, pp.2-542, 2008.
DOI : 10.1021/cr0681041

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.463.3404

K. Länge, B. E. Rapp, and M. Rapp, Surface acoustic wave biosensors: a review, Analytical and Bioanalytical Chemistry, vol.22, issue.285, pp.391-400, 2008.
DOI : 10.1007/s00216-008-1911-5

T. M. Gronewold, Surface acoustic wave sensors in the bioanalytical field: Recent trends and challenges, Analytica Chimica Acta, vol.603, issue.2, pp.603-612, 2007.
DOI : 10.1016/j.aca.2007.09.056

K. Arshak, E. Moore, G. M. Lyons, J. Harris, and S. Clifford, A review of gas sensors employed in electronic nose applications, Sensor Review, vol.24, issue.2, pp.24-25, 2004.
DOI : 10.1108/02602280410525977

Q. Zhu, Microcantilever Sensors in Biological and Chemical Detections, Sens. Trans. J, vol.125, pp.1-21, 2011.

T. Yan, B. E. Jones, R. T. Rakowski, M. J. Tudor, S. P. Beeby et al., Design and fabrication of thick-film PZT-metallic triple beam resonators, Sensors and Actuators A: Physical, vol.115, issue.2-3, pp.11540-11541, 2004.
DOI : 10.1016/j.sna.2004.04.048

R. Lou-moeller, Screen-printed piezoceramic thick films for miniaturised devices, Journal of Electroceramics, vol.10, issue.4, pp.3-338, 2007.
DOI : 10.1007/s10832-007-9055-0

Z. Wang, J. Miao, C. W. Tan, and T. Xu, Fabrication of piezoelectric MEMS devices-from thin film to bulk PZT wafer, Journal of Electroceramics, vol.120, issue.131, pp.24-29, 2010.
DOI : 10.1007/s10832-008-9454-x

J. H. Park, H. Kim, D. S. Yoon, S. Y. Kwang, J. Lee et al., Effects of the material properties on piezoelectric PZT thick film micro cantilevers as sensors and self actuators, Journal of Electroceramics, vol.50, issue.1, pp.1-10, 2010.
DOI : 10.1007/s10832-009-9581-z

C. Castille, E ´ tude de MEMS piézoélectriques libérés et microstructurés par sérigraphie: application a ` la détection en milieu gazeux et en milieu liquide, 2010.

C. Lucat, P. Ginet, C. Castille, H. Debéda, and F. Ménil, Microsystems elements based on free-standing thick-films made with a new sacrificial layer process, Microelectronics Reliability, vol.48, issue.6, pp.48-50, 2008.
DOI : 10.1016/j.microrel.2008.03.016

URL : https://hal.archives-ouvertes.fr/hal-00322332

D. L. Corker, R. W. Whatmore, E. Ringgaard, and W. W. Wolny, Liquid-phase sintering of PZT ceramics, Journal of the European Ceramic Society, vol.20, issue.12, pp.9-2045, 2000.
DOI : 10.1016/S0955-2219(00)00089-3

X. X. Wang, K. Murakami, O. Sugiyama, and S. Kaneko, Piezoelectric properties, densification behavior and microstructural evolution of low temperature sintered PZT ceramics with sintering aids, Journal of the European Ceramic Society, vol.21, issue.10-11, pp.7-1371, 2001.
DOI : 10.1016/S0955-2219(01)00020-6

L. Seveyrat, Elaboration et caractérisation de films e ´pais piézoélectriques sérigraphiés sur alumine, aciers inoxydables et vitrocéramiques, 2002.

C. Castille, C. Lucat, P. Ginet, F. Ménil, and M. Maglione, Free-standing piezoelectric thick-films for MEMS applications, IMAPS/ACerS 4th International Conference on Ceramic Interconnect and Ceramic Microsystems Technologies, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00322346

S. Gouverneur, C. Lucat, F. Ménil, and J. L. Aucouturier, New densification process of thick films, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.16, issue.5, pp.16-21, 1993.
DOI : 10.1109/33.239879

URL : https://hal.archives-ouvertes.fr/hal-00196231

R. D. Blevins, Formulas for Natural Frequency and Mode Shape, Journal of Applied Mechanics, vol.47, issue.2, 1979.
DOI : 10.1115/1.3153712

R. Lakhmi, H. Debéda, I. Dufour, and C. Lucat, Determination of Young's Moduli for Free-Standing Screen-Printed Thick Film Layers Used in MEMS, Proceedings of the 20th Workshop on Micromachining, Micro Mechanics, and Micro Systems, 2009.