Improvement of compatibility of poly(lactic acid) blended with natural rubber by modified natural rubber - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2013

Improvement of compatibility of poly(lactic acid) blended with natural rubber by modified natural rubber

Amélioration de la compatibilité de l'acide polylactique mélangé au caoutchouc naturel par des dérivés du caoutchouc naturel

Wannapa Chumeka
  • Fonction : Auteur
  • PersonId : 771852
  • IdRef : 177278358

Résumé

The aim of this research work was to improve the compatibility of polymer blends made from poly(lactic acid) and natural rubber (PLA/NR blends) by using modified natural rubber as a compatibilizer. Natural rubber was chemically modified into two categories: natural rubber grafted poly(vinyl acetate) copolymer (NR-g-PVAc) and block copolymers (PLA-NR diblock copolymer and PLA-NR-PLA triblock copolymer). PLA/NR blends were prepared by melting blending in a twin screw extruder and compression molded to obtain a 2-mm thick sheet. The blends contained 10-20 wt% of NR and modified NR, and the impact strength and tensile properties were investigated. The compatibilization effect was determined by DMTA, DSC and SEM. NR-g-PVAc was synthesized by emulsion polymerization to obtain different PVAc graft contents (1%, 5% and 12%). Characterization by DMTA showed an enhancement in miscibility of the PLA/NR-g-PVAc blends. NR-g-PVAc could be used as a toughening agent of PLA and as a compatibilizer of the PLA/NR blend. The block copolymers were synthesized following two routes: (1) hydroxyl telechelic natural rubber (HTNR) and lactide and (2) HTNR and PLA prepolymer. In the former route, lactide was in situ polymerized via a ring opening polymerization to be a PLA block segment during block copolymerization. In the latter route PLA prepolymer was synthesized by a condensation polymerization of L-lactic acid prior to block copolymerization. Both block copolymers acted as good compatibilizers for the PLA/NR blend by increasing the impact strength and decreasing the NR particle size. Triblock copolymers provided higher impact strength than diblock copolymers, and they were a less effective compatibilizer than NR-g-PVAc. In contrast to NR and NR-g-PVAc, the block copolymer was not a good toughening agent for PLA.
L’objectif de ce travail de thèse était l’amélioration de la compatibilité de mélanges d’acide polylactique et de caoutchouc naturel (mélanges PLA/NR) par l’ajout de dérivés du caoutchouc naturel comme agents compatibilisants. Le caoutchouc naturel a été modifié selon deux approches : synthèse d’un copolymère greffé caoutchouc- poly(vinyl acétate) (NR-g-PVAc) et synthèse de polymères à blocks PLA-NR et PLA-NR-PLA. Les mélanges PLA/NR ont été préparés par extrusion dans une extrudeuse à double vis et moulées par compression pour obtenir des feuilles de 2 mm d’épaisseur. Les mélanges contenaient 10-20% en poids de NR et NR modifiée. La résistance au choc et les propriétés en traction ont été étudiées. L’effet de compatibilisation a été déterminé par DMTA, DSC et MEB. NR-g-PVAc a été synthétisé par polymérisation en émulsion pour obtenir de copolymères avec différents contenus en PVAc greffé (1%, 5% and 12%). La caractérisation des matériaux par DMTA a montré une augmentation de la miscibilité des mélanges PLA/NR-g-PVAc.NR-g-PVAc a résulté être un agent durcissant pour le PLA et un agent compatibilisant pour les mélanges PLA/NR. Les polymères à bloc ont été synthétisés selon deux routes : (1) NR hydroxy téléquelique (HTNR) et lactide et (2) NR hydroxy téléquelique et pré-polymère PLA. Dans la première approche, le lactide a été polymérisé in situ à travers la polymérisation par ouverture de cycle pour donner un bloc. Dans la deuxième approche, le pré-polymère PLA a été synthétisé par polymérisation directe de l’acide L-lactique avant copolymérisation à blocs. Les deux types de copolymères se sont révélés de bons agents compatibilisants pour les mélanges PLA/NR, car ils ont augmenté la résistance au choc et ils ont diminué la taille des particules de caoutchouc.
Fichier principal
Vignette du fichier
CHUMEKA_2014LEMA1029.pdf (15.45 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01018026 , version 1 (03-07-2014)

Identifiants

  • HAL Id : tel-01018026 , version 1

Citer

Wannapa Chumeka. Improvement of compatibility of poly(lactic acid) blended with natural rubber by modified natural rubber. Other. Le Mans Université; Prince of Songkla University, 2013. English. ⟨NNT : 2013LEMA1029⟩. ⟨tel-01018026⟩
507 Consultations
3348 Téléchargements

Partager

Gmail Facebook X LinkedIn More