Functionalization of titanium surface for dental implants design - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Functionalization of titanium surface for dental implants design

Fonctionnalisation de la surface du titane pour les implants dentaires

Sabin Issa
  • Fonction : Auteur
  • PersonId : 776465
  • IdRef : 183513371

Résumé

The objective of this thesis is to create new nanostructured surfaces with bioactive coatings and to study theirs physicochemical properties in order to develop better dental implants designs and promote their osseointegration. This functionalization was performed in two steps; starting by the nanostructuration of TiO2 surface by anodisation to create reactive sites on the edges of titanium nanotubes which acts as points of “attachment" to bioactive coatings. The second step was the surface chemical modification by coating the nanostructured surface with bioactive coatings of calcium phosphate (CaP) and strontium doped calcium phosphate (Sr.CaP). This coating was performed by pulsed electrodeposition. The physicochemical characterization by XPS, SEM and IR showed that doping with Sr promotes a non-apatitic compound similar to DCPD or DCPA (Dicalcium Phosphate Dihydrate or Anhydrous), while undoped CaP coating looks like an amorphous apatite-like compound ACP. The addition of strontium has the double advantage of optimizing the cellular multiplication and of giving an inorganic phase with bio-performance better than apatitic compounds. We also evaluated the adsorption proprieties of these functionalized surfaces by investigating the adsorption of proteins (BSA). This adsorption was performed onto tblank nanotubes, nanotubes coated with CaP and Sr doped CaP and evaluated according to deposition time and to the pH value of the solution that affect both protein and surface charge. The kinetic and structural evaluation reveals different adsorption geometries according to pH and adsorption time and also according to the chemical nature of surface. Such results of protein adsorption and conformation may form a database to understand and control protein activities and reactions with living body when used for dental implants system
L'objectif de cette thèse est de créer de nouvelles surfaces nanostructurées avec des revêtements bioactifs et d'étudier leurs propriétés physico-chimiques afin de développer de meilleurs modèles d'implants dentaires et d'optimiser leur ostéo-intégration. Cette fonctionnalisation a été réalisée en deux étapes ; on a commencé par la nano structuration de la surface de TiO2 par anodisation pour créer des sites réactifs sur les bords extérieurs des nanotubes qui agissent comme des points d'ancrage du revêtement bioactif et améliorent le verrouillage mécanique entre le revêtement et le substrat. Ensuite, la modification chimique est réalisée par revêtement de la surface nanostructurée avec des revêtements bioactifs de phosphate de calcium (CaP) et phosphate de calcium dopé par strontium (Sr.CaP). Ce revêtement a été réalisé par électrodéposition pulsée. La caractérisation physico-chimique par MEB, XPS et IR a montré que le dopage avec Sr favorise un composé non-apatitique similaire à DCPD ou DCPA (Dicalcium Phosphate Dihydrate ou Anhydrous), tandis que le revêtement de CaP non-dopé ressemble à un composé d'apatite amorphe ACP. L'addition de strontium s'offre le double avantage de favoriser les mécanismes de la croissance cellulaire et d'obtenir une phase inorganique avec de bio-performances meilleurs que les composés apatitiques. Nous avons également évalué les propriétés d'adsorption de ces surfaces fonctionnalisées en étudiant l'adsorption des protéines (BSA).Cette adsorption a été réalisée sur nanotubes fonctionnalisés vierges, nanotubes enrobés avec CAP et CAP dopé Sr et elle a été évalués selon le temps de déposition et la valeur du pH de la solution qui affecte la charge de la protéine et de la surface. L'évaluation cinétique et structurelle révèle diffèrent géométries d'adsorption en fonction du pH, du temps d'adsorption et aussi en fonction de la nature chimique de la surface. Ces résultats de l'adsorption et conformation de protéine forment une base de données pour comprendre et contrôler ses activités et réactions avec le vivant lorsqu'elle est utilisée dans le system des implants dentaires
Fichier principal
Vignette du fichier
2014PEST1075.pdf (7.35 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01124334 , version 1 (06-03-2015)

Identifiants

  • HAL Id : tel-01124334 , version 1

Citer

Sabin Issa. Functionalization of titanium surface for dental implants design. Chemical Sciences. Université Paris-Est, 2014. English. ⟨NNT : 2014PEST1075⟩. ⟨tel-01124334⟩
585 Consultations
1000 Téléchargements

Partager

Gmail Facebook X LinkedIn More