Compréhension des mécanismes de cristallisation sous tension des élastomères en conditions quasi-statiques et dynamiques - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Understanding the mechanisms of strain induced crystallization of natural rubber in quasi-static and dynamic conditions

Compréhension des mécanismes de cristallisation sous tension des élastomères en conditions quasi-statiques et dynamiques

Résumé

Strain induced crystallization (SIC) of Natural Rubber (NR) has been the subject of a large number of studies since its discovery in 1929. However, the literature is very poor concerning the study of SIC when samples are deformed with a stretching time in the range of the SIC characteristic time (around 10msec-100msec). Thus, the aim of this thesis is to contribute to the understanding of the SIC phenomenon thanks to dynamic tensile tests at high strain rates. To meet this goal, we have developed a dynamic tensile test machine allowing stretching samples of elastomers at strain rates up to 290 s-1. The tests are carried out on four NR with different sulphur amount, two NR with different carbon black filler amounts. We also studied a synthetic rubber made of polyisoprene chains (IR) able to crystallize under strain. Dynamic tests are relatively difficult to interpret; a significant work has thus been first performed at slow strain rate. Moreover, the experiments are coupled with a thermodynamic approach. First, the general mechanisms associated to the crystallization are identified as follows: during mechanical loading or during cooling in the deformed state, SIC is the result of successive appearance of crystallite populations whose nucleation and growth depend on the local network density. Crystallization is enhanced when the cycle is performed above the melting stretching ratio. This phenomenon is attributed to a memory effect due to a permanent alignment of the chains. Finally, the effect of the strain rate is theoretically described thanks to a diffusion term. This approach, coupled with experiments suggests that SIC is mainly governed by the nucleation kinetics. For the dynamic test, the combination of the memory effect and the acceleration of the melting during the cycle lead to a reduction or even disappearance of the crystalline hysteresis. In addition, self-heating, which progressively increases with the frequency of the cycle, causes the delay of the melting stretching ratio. This well explains why the crystallinity index decreases at the minimum stretching ratio of the dynamic cycles when the frequency increases. We finally compared the ability of our different rubbers to crystallize at high strain rates. SIC is enhanced for the weakly crosslinked rubber. This might be related to the dynamics of its free entanglements, these ones acting as supplementary crosslinks at high strain rates. Then, a filled rubber is compared to the unfilled one. We found that the filled sample has a lower ability to crystallize at high strain rates as compared to the unfilled one. This is likely due to the strong self-heating at the interface between the fillers and the rubbery matrix. Finally, we observe a convergence of crystallization kinetics in natural and synthetic rubbers at high strains and high strain rates. This is attributed to the predominance of the entropic energy in the nucleation kinetics in these experimental conditions.
La cristallisation sous tension (SIC) du caoutchouc naturel (NR) a fait l’objet d’un nombre considérable d’études depuis sa découverte il y a près d’un siècle. Cependant, il existe peu d’informations dans la littérature concernant le comportement du caoutchouc à des vitesses de sollicitation proches des temps caractéristiques de cristallisation. L’objectif de cette thèse est alors de contribuer à la compréhension du phénomène de cristallisation sous tension grâce à des essais dynamiques à grandes vitesses. Pour répondre à cet objectif, nous avons développé une machine de traction permettant de déformer des échantillons d’élastomères à des vitesses de sollicitation pouvant aller jusqu’à 290s-1. Les essais ont été réalisés sur quatre NR avec des taux de soufre variables, deux NR chargés comportant des taux de noir de carbone différents. Nous avons également étudié un matériau synthétique à base de polyisoprène (IR) afin de comparer ses performances à celle du NR. Les essais dynamiques étant relativement difficiles à interpréter, un travail conséquent a donc été d’abord réalisé à basse vitesse. En outre, l’approche expérimentale proposée a été couplée à une approche thermodynamique de la SIC. Les mécanismes généraux associés à la cristallisation que nous identifions sont les suivants: lors d’une traction, la cristallisation consiste en l’apparition de populations cristallines conditionnée par l’hétérogénéité de réticulation des échantillons. Cette cristallisation semble nettement accélérée dès lors que ce cycle est réalisé au-dessus de la déformation de fusion. Nous attribuons ce phénomène à un effet mémoire dû à un alignement permanent des chaînes. Enfin, l’effet de la vitesse est décrit théoriquement en intégrant un terme de diffusion des chaînes dans la cinétique de SIC. Cette approche couplée à des essais mécaniques suggère que la SIC est essentiellement gouvernée par la cinétique de nucléation. Lors des tests dynamiques, la combinaison de l’effet mémoire et d’une accélération de la fusion pendant le cycle entraine une nette diminution voire une disparition de l’hystérèse cristalline. En outre, l’auto-échauffement, qui augmente progressivement avec la fréquence du cycle, tend à supprimer l’effet mémoire en provoquant le passage du cycle en dessous de la déformation de fusion. Lors de ces essais dynamiques, la SIC semble favorisée pour le matériau le moins réticulé. Nous attribuons cet effet au blocage d’enchevêtrements jouant le rôle de sites nucléants pour la SIC. Le matériau chargé semble avoir une moins bonne aptitude à cristalliser à hautes vitesses, par rapport à l’élastomère non chargé, en raison d’un auto-échauffement important à l’interface entre charges et matrice. Enfin, nous notons une convergence des cinétiques de cristallisation du caoutchouc naturel et synthétique à grande déformation et grande vitesse de sollicitation, que nous attribuons à la prédominance du terme énergétique d’origine entropique dans la cinétique de nucléation.
Fichier principal
Vignette du fichier
these.pdf (6.19 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01135298 , version 1 (25-03-2015)

Identifiants

  • HAL Id : tel-01135298 , version 1

Citer

Nicolas Candau. Compréhension des mécanismes de cristallisation sous tension des élastomères en conditions quasi-statiques et dynamiques. Matériaux. INSA de Lyon, 2014. Français. ⟨NNT : 2014ISAL0057⟩. ⟨tel-01135298⟩
566 Consultations
1319 Téléchargements

Partager

Gmail Facebook X LinkedIn More