, Osiris grâce à deux modes d'utilisation. Le premier (MET, 200 kV) permet de visualiser de manière très contractée des grains. Un usage en haute résolution (HRTEM) permet de distinguer les plans cristallins et d'obtenir des figures de diffraction Avec le second mode (MEBT-détecteur HAADF, 200 kV), le contraste entre les grains est moins important et certains détails
, First Clinical Experience with BION Implants for Therapeutic Electrical Stimulation Development of Bion Technology for functional electrical stimulation: Hermetic packaging Development of ceramic-to-metal package for BION microstimulator Housing for implantable medical device, Bibliographie [1] I. Global Industry Analyst Neurostimulation: A Global Strategic Business Report, pp.38-47, 2001.
, Leadless Pacing A Biomedical Implantable FES Battery-Powered A wireless near-infrared energy system for medical implants: A less invasive method for supplying light power to implant devices Active microelectronic neurosensor arrays for implantable brain communication interfaces, IEEE Eng. Med. Biol. IEEE Trans. neural Syst. Rehabil. Eng, vol.17, issue.4, pp.2583-2596, 1999.
, Toward an energy harvester for leadless pacemakers, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00868838
, Generating Electricity from Biofluid with a Nanowire-Based Biofuel Cell for Self-Powered Nanodevices, Advanced Materials, vol.293, issue.47, pp.5388-92, 2010.
DOI : 10.1002/adma.201002519
, NanoEngineered Thermoelectric Power Generation for Environmental and Human Implantable power Sources, 2010.
, Deep Brain Stimulation for Movement Disorders -Products and Procedures, 2015.
, Available: http://professionalintl .sjm.com/professional, Brio Rechargeable IPG, p.brio-rechargeable-ipg, 2009.
, Document descriptif -Activa RC Model 37612, 2008.
, Complications of Deep Brain Stimulation: A Collective Review, Asian Journal of Surgery, vol.32, issue.4
DOI : 10.1016/S1015-9584(09)60404-8
, An Overview of Cochlear Implant Systems, pp.1-20, 2000.
, Encapsulation hermétique pour systèmes hydro-et thermo-sensibles, Thèse EPFL, 2009.
, Technology Advances and Challenges in Hermetic Packaging for Implantable Medical Devices, 2010.
DOI : 10.1007/978-0-387-98120-8_2
, Review of test methods used for the measurement of hermeticity in packages containing small cavities, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.2, issue.3, pp.430-438, 2012.
DOI : 10.1109/TCPMT.2011.2176122
, A new method for hermeticity testing of wafer-level packaging, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS and Nanodevices IX, p.25031, 2010.
DOI : 10.1117/12.839860
, Méthodologie Hélium, Coffrend, 2008.
, Ultra low leak detection method for MEMS devices, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005., pp.524-527, 2005.
DOI : 10.1109/MEMSYS.2005.1453982
, Procédé de contrôle de l'herméticité d'une cavité close d'un composant micrométrique, et composant micrométrique pour sa mise en oeuvre, 2011.
, Ceramics for medical applications: A picture for the next 20 years, Journal of the European Ceramic Society, vol.29, issue.7, pp.1245-1255, 2009.
DOI : 10.1016/j.jeurceramsoc.2008.08.025
URL : https://hal.archives-ouvertes.fr/hal-00431366
, A Review of Recent Investigations on Zirconia Joining for Biomedical Applications, Adv. Join. Ceram, vol.35, issue.213, 2003.
DOI : 10.1002/9781118405802.ch7
, CURRENT STATUS OF ZIRCONIA USED IN TOTAL HIP IMPLANTS, The Journal of Bone and Joint Surgery-American Volume, vol.85, issue.4, pp.73-84, 2003.
DOI : 10.2106/00004623-200300004-00009
, Titanium and Titanium Alloys: Fundamentals and Applications, 2003.
DOI : 10.1002/3527602119
, The electrochemical behavior of metallic implant materials as an indicator of their biocompatibility, Journal of Biomedical Materials Research, vol.28, issue.7, pp.881-896, 1987.
DOI : 10.1002/jbm.820210705
, Effects of compression on soft tissue optical properties, IEEE Journal of Selected Topics in Quantum Electronics, vol.2, issue.4, pp.943-950, 1996.
DOI : 10.1109/2944.577320
, Vers l'autonomie énergétique des dispositifs médicaux implantables, Micro et nanosystèmes autonomes en énergie, pp.49-86, 2012.
, Microstructure of diffusional zirconia ? titanium and zirconia ? (Ti-6 wt%Al-4 wt%V) alloy joints, Journal of Materials Science, vol.33, issue.1, pp.215-221, 1998.
DOI : 10.1023/A:1004378520526
, Biocéramiques : Des monolithes aux composites, Habilitation à Diriger des Recherches, 2009.
, Les alliages Nickel-Titane ( NiTi ), 2009.
, Elaboration et Evaluation d'une loi de comportement basée sur l'évolution de la microstructure, J. Phys, vol.1, pp.795-802, 1991.
, Structure, Conductivity, and Thermal Expansion Studies of Redox Stable Rutile Niobium Chromium Titanates in Oxidizing and Reducing Conditions, Chemistry of Materials, vol.21, issue.15, pp.3549-3561, 2009.
DOI : 10.1021/cm900281r
, Reliability assessment in advanced nanocomposite materials for orthopaedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.3, pp.303-317, 2011.
DOI : 10.1016/j.jmbbm.2010.10.010
, Zirconia as a ceramic biomaterial, Biomaterials, vol.20, issue.1, pp.1-25, 1999.
DOI : 10.1016/S0142-9612(98)00010-6
, Boitier hermétique, en particulier pour l'encapsulation d'un dispositif médical implantable -WO 2014, pp.90937-90938, 2012.
, Air???particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography, Journal of the Mechanical Behavior of Biomedical Materials, vol.26, pp.155-63, 2013.
DOI : 10.1016/j.jmbbm.2013.04.018
, Stabilized zirconia as a structural ceramic: An overview???, Dental Materials, vol.24, issue.3, pp.289-98, 2008.
DOI : 10.1016/j.dental.2007.05.005
, Alliages à mémoire de forme, Techniques de l'Ingénieur, pp.1-11, 1986.
, Etude d'alliages à mémoire de forme base Ru pour applications hautes températures, 2007.
, On the classification of displacive phase transformations, Proceedings of the International Conference On Martensitic Transformation, 1979.
, Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants, Annual Review of Materials Research, vol.37, issue.1, pp.1-32, 2007.
DOI : 10.1146/annurev.matsci.37.052506.084250
URL : https://hal.archives-ouvertes.fr/hal-00434119
, The manufacture of partiallystabilised and fully-stabilised zirconia fibres blow spun from an alkoxide derived aqueous sol-gel precursor, J. Electrochem. Soc, vol.21, pp.19-27, 2001.
, State of the art of zirconia for dental applications, Dental Materials, vol.24, issue.3, pp.299-307, 2008.
DOI : 10.1016/j.dental.2007.05.007
, Transformation of yttria partially stabilized zirconia by low temperature annealing in air, Journal of Materials Science, vol.2, issue.4, pp.1466-1470, 1985.
DOI : 10.1007/BF01026344
, Tetragonal zirconia polycrystal (TZP)???A review, International Journal of High Technology Ceramics, vol.3, issue.1, pp.1-32, 1987.
DOI : 10.1016/0267-3762(87)90060-9
, Energy Crossovers in Nanocrystalline Zirconia, Journal of the American Ceramic Society, vol.58, issue.12], pp.160-167, 2004.
DOI : 10.1111/j.1551-2916.2004.00031.x
, Neutron Diffraction Study of the Size-Induced Tetragonal to Monoclinic Phase Transition in Zirconia Nanocrystals, Physical Review Letters, vol.90, issue.21, p.216103, 2003.
DOI : 10.1103/PhysRevLett.90.216103
, Elaboration et caractérisation de micro-et nano-composites alumine-zircone pour application orthopédique, 2006.
, Hydrothermal stability of yttria- and ceria-doped tetragonal zirconia-alumina composites, Journal of Materials Science, vol.99, issue.4, pp.5047-5052, 1991.
DOI : 10.1007/BF00549890
, Propriétés du verre SiO2 96
, Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content, Acta Materialia, vol.50, issue.18, pp.4555-4562, 2002.
DOI : 10.1016/S1359-6454(02)00283-5
, The modulated structure formed by isothermal ageing in ZrO2-5.2 mol % Y2O3 alloy, Journal of Materials Science, vol.50, issue.3, pp.1085-1092, 1985.
DOI : 10.1007/BF00585753
, Analyse multi-échelle de la durabilité des biocéramiques pour prothèses de hanche . Etude in vitro et ex vivo, 2012.
, Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia, Biomaterials, vol.27, issue.10, pp.2186-92, 2006.
DOI : 10.1016/j.biomaterials.2005.11.021
URL : https://hal.archives-ouvertes.fr/hal-00436172
, A study on properties of yttrium-stabilized zirconia thin films fabricated by different deposition techniques, Renewable Energy, vol.65, pp.202-206, 2014.
DOI : 10.1016/j.renene.2013.08.043
, Bioceramics: properties, characterizations, and applications, 2008.
DOI : 10.1007/978-0-387-09545-5
, Implants chirurgicaux -Produits céramiques à base de zircone tétragonal stabilisé à l'oxyde d'yttrium (Y-TZP)
, A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol.24, issue.4, pp.239-284, 2005.
DOI : 10.1002/jbm.b.30123
URL : https://hal.archives-ouvertes.fr/hal-00436820
, Phase change and mechanical properties of Zr02-Y2O3 solid electrolytes after ageing, Sol. State Ionics, 1981.
, X-ray diffraction and atomic force microscopy study in aged zirconia-toughened alumina composite with dispersion of m-ZrO2 nanoparticles, International Journal of Refractory Metals and Hard Materials, vol.35, issue.2012, pp.270-278, 2012.
DOI : 10.1016/j.ijrmhm.2012.06.009
, Long-time aging in 3mol.% yttria-stabilized tetragonal zirconia polycrystals at human body temperature, Acta Biomaterialia, vol.10, issue.2, pp.951-960, 2014.
DOI : 10.1016/j.actbio.2013.09.033
, Low temperature degradation of a Y-TZP dental ceramic, Acta Biomaterialia, vol.7, issue.2, pp.858-65, 2011.
DOI : 10.1016/j.actbio.2010.09.020
, Subsurface evaluation of hydrothermal degradation of zirconia, Acta Materialia, vol.59, issue.2, pp.473-484, 2011.
DOI : 10.1016/j.actamat.2010.09.047
, Focused ion beam tomography of zirconia degraded under hydrothermal conditions, Journal of the European Ceramic Society, vol.32, issue.10, pp.2129-2136, 2012.
DOI : 10.1016/j.jeurceramsoc.2012.02.011
, The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends, Journal of the American Ceramic Society, vol.92, issue.9, pp.1901-1920, 2009.
DOI : 10.1111/j.1551-2916.2009.03278.x
URL : https://hal.archives-ouvertes.fr/hal-00517678
, Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty, Acta Biomaterialia, vol.9, issue.7, pp.7545-55, 2013.
DOI : 10.1016/j.actbio.2013.03.030
URL : https://hal.archives-ouvertes.fr/hal-00828028
, A new method to measure monoclinic depth profile in zirconia-based ceramics from X-ray diffraction data, International Journal of Materials Research, vol.101, issue.1, pp.88-94, 2013.
DOI : 10.3139/146.110251
URL : https://hal.archives-ouvertes.fr/hal-00517686
, Low-Temperature Aging of Y-TZP Ceramics, Journal of the American Ceramic Society, vol.65, issue.4, pp.2150-2154, 1999.
DOI : 10.1111/j.1151-2916.1999.tb02055.x
, Control of the tetragonal-to-monoclinic phase transformation of yttria partially stabilized zirconia in hot water, Journal of Materials Science, vol.20, issue.4, pp.3988-3992, 1985.
DOI : 10.1007/BF00552389
, Isothermal Tetragonal-to-Monoclinic Phase Transformation in a Zirconia–Yttria System, MATERIALS TRANSACTIONS, vol.46, issue.7, pp.1443-1451, 2005.
DOI : 10.2320/matertrans.46.1443
, Comparative ageing behaviour of commercial, unworn and worn 3Y-TZP and zirconia-toughened alumina hip joint heads, Journal of the European Ceramic Society, vol.32, issue.8, pp.1529-1540, 2012.
DOI : 10.1016/j.jeurceramsoc.2012.01.003
, Direct evidence for continuous linear kinetics in the low-temperature degradation of Y-TZP, Acta Biomaterialia, vol.9, issue.1, pp.4826-4861, 2013.
DOI : 10.1016/j.actbio.2012.08.032
, Degradation During Aging of Transformation-Toughened ZrO2-Y2O3 Materials at 250oC, Journal of the American Ceramic Society, vol.5, issue.11, pp.237-277, 1986.
DOI : 10.1111/j.1151-2916.1986.tb07415.x
, Cation self-diffusion of [sup 44]Ca, [sup 88]Y, and [sup 96]Zr in single-crystalline calcia- and yttria-doped zirconia, Journal of Applied Physics, vol.94, issue.12, pp.7547-52, 2003.
DOI : 10.1063/1.1628379
, Low temperature degradation of yttria-stabilized tetragonal zirconia polycrystals under aqueous solutions, Journal of Nuclear Materials, vol.209, issue.3, pp.326-331, 1994.
DOI : 10.1016/0022-3115(94)90271-2
, Stability of Y-TZP during hydrothermal treatment: neutron experiments and stability considerations, Journal of the European Ceramic Society, vol.25, issue.9, pp.1597-1602, 2005.
DOI : 10.1016/j.jeurceramsoc.2004.03.025
, Oxygen Vacancy Comparisons for 3Y - TZP Sintered in Air and Argon Gas Atmosphere, Applied Mechanics and Materials, vol.372, pp.173-176, 2013.
DOI : 10.4028/www.scientific.net/AMM.372.173
, Property Degradation of Tetragonal Zirconia Induced by Low-Temperature Defect Reaction with Water Molecules, Chemistry of Materials, vol.16, issue.21, pp.3988-3994, 2004.
DOI : 10.1021/cm040167h
, Effect of oxygen vacancies on transformation of zirconia at low temperatures, Journal of Materials Science, vol.32, issue.24, pp.6653-56, 1997.
DOI : 10.1023/A:1018604504171
, A stabilization mechanism of zirconia based on oxygen vacancies only, Acta Materialia, vol.50, issue.20, pp.5171-5178, 2002.
DOI : 10.1016/S1359-6454(02)00385-3
, Defect Chemistry, Phase Stability and Properties of Zirconia Polycrystals, p.30, 1993.
, Zirconia femoral head fractures, The Journal of Arthroplasty, vol.19, issue.7, pp.898-905, 2004.
DOI : 10.1016/j.arth.2004.02.045
, Differences in the Tetragonal to Monoclinic Phase Transformation Rate in Hot Water of 3mol% Y2O3-ZrO2 Ceramics under Different Surface Conditions., Journal of the Ceramic Society of Japan, vol.107, issue.1241, pp.92-95, 1999.
DOI : 10.2109/jcersj.107.92
, 3Y-TZP In-Depth Phase Transformation by Raman Spectroscopy: A Comparison of Three Methods, Journal of the American Ceramic Society, vol.25, issue.4, pp.2233-2240, 2014.
DOI : 10.1111/jace.12892
, The Role of Nanostructured Al2O3 Layer in Reduction of Hot Corrosion Products in Normal YSZ Layer, J. Nanomater, vol.2013, 2013.
, Atomic layer deposited thin films for corrosion protection, Le Journal de Physique IV, vol.09, issue.PR8, pp.493-499, 1999.
DOI : 10.1051/jp4:1999862
, Microstructure and optical properties of Al2O3/ZrO2 nano multilayer thin films prepared by pulsed laser deposition, Materials Chemistry and Physics, vol.140, issue.1, pp.60-65, 2013.
DOI : 10.1016/j.matchemphys.2013.02.053
, Improved Low-Temperature Environmental Degradation of Yttria-Stabilized Tetragonal Zirconia Polycrystals by Surface Encapsulation, Journal of the American Ceramic Society, vol.67, issue.6, pp.1456-1458, 1999.
DOI : 10.1111/j.1151-2916.1999.tb01940.x
, Ultra-thin layer packaging for implantable electronic devices, Journal of Micromechanics and Microengineering, vol.23, issue.7, p.75001, 2013.
DOI : 10.1088/0960-1317/23/7/075001
, Biomedical device with a protective overlayer -US005755759A, 1998.
, Biophysicochemical evaluation of passivation layers for the packaging of silicon microsystems in medical devices, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 2014.
DOI : 10.1109/ECTC.2014.6897327
, The effect of reduction on the mechanical properties of CeO2 doped tetragonal zirconia ceramics, Acta Materialia, vol.52, issue.6, pp.1675-1682, 2004.
DOI : 10.1016/j.actamat.2003.12.012
, Moisture sensitive degradation in TiO2-Y2O3-ZrO2, Journal of the European Ceramic Society, vol.15, issue.11, pp.1125-1134, 1995.
DOI : 10.1016/0955-2219(95)00083-7
, Strengthening Mechanism of Ceria-Doped Tetragonal Zirconia Polycrystals by Heat Treatment in Reducing Atmosphere, Journal of the Ceramic Society of Japan, vol.111, issue.1292, pp.252-256, 2003.
DOI : 10.2109/jcersj.111.252
, Phase composition, structure and mechanical properties of PSZ (partially stabilized zirconia) crystals as a function of stabilizing impurity content, Journal of Alloys and Compounds, vol.586, pp.231-235, 2014.
DOI : 10.1016/j.jallcom.2013.01.126
, Contribution à l'Etude des Propriétés Optiques de Dépôts Plasma de Zircone Yttriée : Influences de leurs Caractéristiques Microstructurales et Physico-chimiques, Thèse, 2007.
, Contribution à l'étude expérimentale et numérique à l'échelle de la microsturcture de l'écaillage d'un alliage de titane, Thèse, 2005.
, Interêt et apport du titane en prothèse fixée, Thèse, 2008.
, Thermal expansion and lattice parameters of shaped metal deposited Ti???6Al???4V, Journal of Alloys and Compounds, vol.509, issue.6, pp.2723-2728, 2011.
DOI : 10.1016/j.jallcom.2010.12.014
, In situ observations of lattice expansion and transformation rates of ?? and ?? phases in Ti???6Al???4V, Materials Science and Engineering: A, vol.391, issue.1-2, pp.104-113, 2005.
DOI : 10.1016/j.msea.2004.08.084
, Synchrotron X-ray diffraction study of the phase transformations in titanium alloys, Materials Characterization, vol.48, issue.4, pp.279-295, 2002.
DOI : 10.1016/S1044-5803(02)00286-3
, Etude de la diffusion de l'oxygene dans le titane ?? oxyde entre 700 ??c et 950 ??c, Journal of the Less Common Metals, vol.65, issue.1, pp.51-69, 1979.
DOI : 10.1016/0022-5088(79)90152-8
, Experimental study of the influence of interfacial energies and reactivity on wetting in metal/oxide systems, Metallurgical and Materials Transactions A, vol.3, issue.3, pp.599-605, 1994.
DOI : 10.1007/BF02651601
, Metal/ceramic joining., ISIJ International, vol.30, issue.12, pp.1011-1032, 1990.
DOI : 10.2355/isijinternational.30.1011
, Relationship between wettability and interfacial reaction for Sn10Ag4Ti on Al2O3 and SiC substrates, Ceramics International, vol.24, issue.4, pp.273-279, 1998.
DOI : 10.1016/S0272-8842(97)00009-6
, Bonding of zirconia to super alloy with the active brazing technique, Journal of the European Ceramic Society, vol.21, issue.1, pp.45-52, 2001.
DOI : 10.1016/S0955-2219(00)00162-X
, Brazing of metals to zirconia mechanically metallized with titanium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.32, issue.4, pp.468-474, 2010.
DOI : 10.1590/S1678-58782010000400009
, Wetting Oxide and Non-Oxide Ceramics with Active Metals, Materials Science Forum, vol.730, issue.732, pp.730-732, 2013.
DOI : 10.4028/www.scientific.net/MSF.730-732.164
, Diffusion d'impuret??s dans le cuivre et l'??tain liquides, Journal de Physique, vol.41, issue.6, pp.533-542, 1980.
DOI : 10.1051/jphys:01980004106053300
URL : https://hal.archives-ouvertes.fr/jpa-00209277/document
, Diffusion dans les métaux, pp.1-40, 1994.
, An analysis of diffusion-induced porosity in Cu???Ni laminate composites, Materials Science and Engineering: A, vol.124, issue.2, pp.15-18, 1990.
DOI : 10.1016/0921-5093(90)90161-U
, Soudure par interdiffusion dans les systèmes Au-In et In-Ni : application à des composants microélectroniques, Thèse, 2012.
, Phase transformation and microstructural development of zirconia/stainless steel bonded with a Ti/Ni/Ti interlayer for the potential application in solid oxide fuel cells, Journal of Materials Research, vol.52, issue.08, pp.923-934, 2014.
DOI : 10.1007/BF02650086
, Joining of Zirconia and Ti-6A1-4V Using a Ti-based Amorphous Filler, Journal of Materials Science & Technology, vol.27, issue.7, pp.653-658, 2011.
DOI : 10.1016/S1005-0302(11)60121-7
, Brazing Titanium-Vapor-Coated Zirconia, Weld. Res, vol.04, pp.165-172, 1993.
, Interactions at Zirconia-Au-Ti Interfaces at High Temperatures, Key Engineering Materials, vol.206, issue.213, pp.206-213, 2002.
DOI : 10.4028/www.scientific.net/KEM.206-213.487
, Active metal brazing of zirconia, Acta Materialia, vol.48, issue.18-19, pp.18-19, 2000.
DOI : 10.1016/S1359-6454(00)00256-1
, Methods for hermetically sealing ceramic to metallic surfaces and assemblies incorporating such seal, 2001.
, Application and manufacturing method for a ceramic to metal seal, 2003.
, Zirconia to Ti-6Al-4V braze joint for implantable biomedical device, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol.84, issue.2, pp.316-337, 2005.
DOI : 10.1002/jbm.b.30161
, Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel???titanium bone graft substitute, Biomaterials, vol.24, issue.25, pp.4691-4697, 2003.
DOI : 10.1016/S0142-9612(03)00359-4
, Phase formation of Ni???Ti via solid state reaction, Physica Scripta, vol.129, pp.250-254, 2007.
DOI : 10.1088/0031-8949/2007/T129/056
, Porous NiTi alloy prepared from elemental powder sintering, Journal of Materials Research, vol.150, issue.10, pp.2847-2851, 1998.
DOI : 10.1016/1044-5803(94)90087-6
, Easy assessment of the biocompatibility of Ni-Ti alloys by in vitro cell culture experiments on a functionally graded Ni-NiTi-Ti material, Biomaterials, vol.23, issue.23, pp.4549-55, 2002.
, of nickel into titanium in Ni???Ti multilayers by grazing-angle neutron reflectometry, Journal of Applied Crystallography, vol.26, issue.3, pp.334-342, 1993.
DOI : 10.1107/S0021889892010355
, Interfacial Interaction and Diffusion in Binary Systems, Defect Diffus. Forum, vol.263, issue.3, pp.75-80, 2007.
, Diffusion in the titanium-nickel system: I. occurrence and growth of the various intermetallic compounds, Metallurgical Transactions, vol.21, issue.8, pp.1817-1826, 1974.
DOI : 10.1007/BF02644146
, Enhanced growth of intermetallic phases in the Ni???Ti system by current effects, Acta Materialia, vol.51, issue.15, pp.4487-4495, 2003.
DOI : 10.1016/S1359-6454(03)00284-2
, Joining of zirconia mechanically metallized with titanium, Cer??mica, vol.56, issue.339, pp.212-221, 2010.
DOI : 10.1590/S0366-69132010000300002
, A model for coupled growth of reaction layers in reactive brazing of ZrO2-toughened Al2O3, Metallurgical and Materials Transactions A, vol.49, issue.3, pp.3630-3638, 1996.
DOI : 10.1007/BF02595454
, Electrochemical corrosion of titanium and titanium-based alloys, The Journal of Prosthetic Dentistry, vol.85, issue.2, pp.195-202, 2001.
DOI : 10.1067/mpr.2001.113029
, Diffusion in α-Ti and Zr, MATERIALS TRANSACTIONS, vol.44, issue.1, pp.2-13, 2003.
DOI : 10.2320/matertrans.44.2
, Active brazing of pure alumina to Kovar alloy based on the partial transient liquid phase (PTLP) technique with Ni???Ti interlayer, Journal of the European Ceramic Society, vol.22, issue.13, pp.2181-2186, 2002.
DOI : 10.1016/S0955-2219(02)00011-0
, Site internet ENrG, 2015.
, Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis, Biomaterials, vol.25, issue.24, pp.5539-5584, 2004.
DOI : 10.1016/j.biomaterials.2004.01.002
, Measurement of single-crystal elastic constants by neutron diffraction from polycrystals, Journal of Applied Crystallography, vol.32, issue.4, pp.624-633, 1999.
DOI : 10.1107/S0021889899002393
, Surface Relief Associated with Isothermal Martensite in Zirconia-3-mol%-Yttria Ceramics Observed by Atomic Force Microscopy, Journal of the American Ceramic Society, vol.37, issue.8, pp.2921-2923, 1999.
DOI : 10.1111/j.1151-2916.1999.tb02180.x
, Modeling the aging kinetics of zirconia ceramics, Journal of the European Ceramic Society, vol.24, issue.13, pp.3483-3489, 2004.
DOI : 10.1016/j.jeurceramsoc.2003.11.025
URL : https://hal.archives-ouvertes.fr/hal-00474919
, Low-temperature degradation in zirconia with a porous surface, Acta Biomaterialia, vol.7, issue.7, pp.2986-93, 2011.
DOI : 10.1016/j.actbio.2011.03.006
, Atomic force microscopy study of the tetragonal to monoclinic transformation behavior of silica doped yttria-stabilized zirconia, Journal of Materials Science, vol.55, issue.6, pp.3821-3823, 2005.
DOI : 10.1007/s10853-005-2550-2
URL : https://hal.archives-ouvertes.fr/hal-00436869
, Assessment of ultrathin yttria-stabilized zirconia foils for biomedical applications, J. Mater. Sci, vol.50, issue.18, pp.6197-6207, 2015.
, Degradation of yttria stabilized zirconia at 370 K under a low applied stress, Materials Science and Engineering: A, vol.297, issue.1-2, pp.26-30, 2001.
DOI : 10.1016/S0921-5093(00)01276-4
, Phase Stability and Mechanical Properties of Zirconia and Zirconia Composites, International Journal of Applied Ceramic Technology, vol.14, issue.3, pp.129-141, 2013.
DOI : 10.1111/j.1744-7402.2011.02717.x
, Y-TZP ceramics for artificial joint replacements, Biomaterials, vol.19, issue.16, pp.1489-1494, 1998.
DOI : 10.1016/S0142-9612(98)00064-7
, Influence of hydrothermal and mechanical conditions on the strength of zirconia, Acta Biomaterialia, vol.6, issue.12, pp.4547-52, 2010.
DOI : 10.1016/j.actbio.2010.07.025
, In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics, The Journal of Prosthetic Dentistry, vol.96, issue.3, pp.154-164, 2006.
DOI : 10.1016/j.prosdent.2006.08.004
, Time-dependent changes in the mechanical properties of zirconia ceramic, Journal of Biomedical Materials Research, vol.11, issue.6, pp.729-763, 1993.
DOI : 10.1002/jbm.820270605
, Biophysicochemical evaluation of passivation layers for the packaging of silicon microsystems in medical devices, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), pp.478-483, 2014.
DOI : 10.1109/ECTC.2014.6897327
, Hydrothermal Aging Behavior of Nanocrystalline Y-TZP Ceramics, Journal of the American Ceramic Society, vol.5, issue.[9], pp.2146-2152, 2011.
DOI : 10.1111/j.1551-2916.2010.04341.x
, Diffusion dans les couches d'oxyde en cours de croissance, Journal de Physique III, vol.5, issue.11, pp.1729-1757, 1995.
DOI : 10.1051/jp3:1995221
URL : https://hal.archives-ouvertes.fr/jpa-00249411
, Diffusion in the titanium-nickel system: II. calculations of chemical and intrinsic diffusion coefficients, Metallurgical Transactions, vol.9, issue.8, pp.1827-1858, 1974.
DOI : 10.1007/BF02644147
, Phase Analysis in Zirconia Systems, Journal of the American Ceramic Society, vol.49, issue.4, 1972.
DOI : 10.1107/S0365110X65002402
, Microscopie électronique à balayage -Principe et équipement, pp.1-19, 2013.
, Étude des métaux par microscopie électronique en transmission (MET) -Microscope, échantillons et diffraction, pp.134-135, 2008.
, Biological reaction to alumina, zirconia, titanium and polyethylene particles implanted onto murine calvaria, Biomaterials, vol.24, issue.21, pp.3655-3661, 2003.
DOI : 10.1016/S0142-9612(03)00120-0