Transition métamatériau / sol réel pour radar HF à onde de surface - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Transition between a Metamaterial and the Soil for High Frequency Surface Wave Radar

Transition métamatériau / sol réel pour radar HF à onde de surface

Nicolas Bourey
  • Fonction : Auteur
  • PersonId : 767602
  • IdRef : 184607256

Résumé

For many years, researches « on over the horizon radar » are investigated, especially on the High Frequency Surface Wave Radar (HFSWR), which is dedicated to the maritime surveillance. To increase the efficiency of the HFSWR we deal with the part of the electromagnetic field radiated at low elevation angle. In a previous work conducted at ONERA and UPMC, it has been suggested to use a metamaterial to launch, at the interface between air and ground a confined wave, which can not exist with a soil with positive permittivity. The metamaterial is placed on the interface in the vicinity of the transmitting antennas to allow the propagation of a strong surface wave without modifying significantly the architecture of the system. But, the inclusion of this metamaterial creates a quite high discontinuity in permittivity. The principal aim of this research work is to answer two main questions. The discontinuity of permittivity between the metamaterial and the soil, is it going to diffract the surface wave create over the metamaterial? The improvement of the electric field level at low elevation angle metamaterial, is it going to keep throughout the propagation on the sea?
Depuis plusieurs années, des recherches sont conduites à l'ONERA, sur les radars " transhorizon " et notamment sur le radar de surveillance côtière à onde de surface (ROS). En vue d'augmenter les performances de ce radar, il est nécessaire d'améliorer son rayonnement en onde de surface. Lors de précédents travaux réalisés à l'ONERA et à l'UPMC, il a été proposé d'utiliser un métamatériau pour lancer, vers la surface de la mer, une onde confinée, ce qui est impossible avec un matériau à permittivité positive. Le métamatériau devra être placé sur le sol, devant les antennes d'émission du radar, ce qui permettra d'augmenter leur rayonnement vers la surface, sans pour autant modifier significativement l'architecture du système. Mais l'ajout du métamatériau crée une rupture d'impédance entre le métamatériau et le sol. L'objectif de ces travaux de thèse est de répondre à deux questions principales. La rupture d'impédance existant entre le métamatériau et le sol va-t-elle diffracter l'onde de surface créée sur celui-ci ? L'augmentation du niveau de champ électrique, à la surface du métamatériau, va-t-elle se conserver lors de la propagation sur la mer ?
Fichier principal
Vignette du fichier
2014PA066560.pdf (41.5 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01232126 , version 1 (23-11-2015)

Identifiants

  • HAL Id : tel-01232126 , version 1

Citer

Nicolas Bourey. Transition métamatériau / sol réel pour radar HF à onde de surface. Electronique. Université Pierre et Marie Curie - Paris VI, 2014. Français. ⟨NNT : 2014PA066560⟩. ⟨tel-01232126⟩
127 Consultations
47 Téléchargements

Partager

Gmail Facebook X LinkedIn More